How to restrict the number of batch jobs used by middleware?

Hi,
I'm using middleware to replicate data which send IDOCs from one system to another. I know on source system, I can use SMQS to restrict the number of connections. But on target system, can I use any tool to restrict number of batch jobs? Because every time when replicating data, all batch jobs are occupied.
Thanks a lot!

Priya:
It is likely that the BLOB content defined in your table is being stored 'Out-of-Line'. This means that the LOB columns are stored in segments of their own. These then are the segments that may need shrinking.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14249/adlob_tables.htm#i1006363
Varad

Similar Messages

How to restrict the number of Records into the Table?

Is there any way that I can restrict the number of records can be entered into the table?
For example I have created a table TAB1 with size category 0( zero).
User dont want to enter more than 100 values, How to restrict the number entries? Whether Basis can do it?
Regards,
Prathap

Hi Prathap,
You can write a code in table maintenance events to restrict the number of Records added into the Table to constant.
Solution:
Se11 -> enter table name (TAB1) -> F6 -> Utlities -> Table maint. generator -> Envirnment -> modification -> events -> write here the form routine name.
Double click on routine name. You will get into include section of the code. Write here code like:
IF current_rec_num > 100.
messgae error 'Entry restriceted to 100'
ENDIF.
Somewhat this way you can achieve your target.
Regards,
Sachin

How to restrict the number of login attempts?

Hi,
Is there any "out of the box" solution to restrict the number of login attempts
in personalization server?
Thanks

why is it obvious he wants to restrict instances
of program, rather than instances in
it? it's not obvious, but it's what I think he meant
he asked "how to restrict the number of instances in
a program". it has the words "instances" and
"program" in it, but not the word "class". on face
value, yes, he's asking about instances within one
JVM. knowing a bit about how newbs minds work, I'm
reading between the lines and I reckon he meant
instances of his program. had he meant
"instances of classes" he'd have said so. "instances
in a program" sounds like somebody more experienced
talking, which if he was, he'd know how to do limit
either instances of classes or instances of
his program, and wouldn't be asking. I could be
totally wrong, but I don't think I am; that's what I
inferred from his post. only the OP knows for sureInteresting.
The OP also said "to any number". So you were guessing that this particular user wants to only permit, for example, five instances to be run on any one box at one time?

How to restrict the Number of sales orders in theTCode:VL10A whil creation

I'm creating the Delivery by using the batch job with program: RVV50R10C Here I need to restrict the number of sales orders numbers while creating deliveries for sales orders
Like system should pick the sales orders (sales documents) from 1 to 100 OR 100 to 200
Please advise me how to do it and what changes I need to do it

Hi,
Aslo, you can see Note 198137 - VL10: Customer-specific enhancements / user exits. As is for SO, check subroutine LV50R_VIEWG03. If cf_subrc = 1 thin this SO isn't seen in list.
***INCLUDE LV50R_VIEWG03 .
*&      Form POSTAB_VEPVG_FILL_USER
FORM POSTAB_VEPVG_FILL_USER
     USING    IX_LIST_PROFIL    TYPE      SHP_VL10_LIST_PROFIL
              IX_PARAMETERS     TYPE      SHP_VL10_PARAMETERS
              IX_SELECT_OPTIONS TYPE      SHP_VL10_SELECT_OPTIONS
              IT_ENQUEUE        TYPE      SHP_VL10_PACKAGE_T
              IX_SD_ORDER       TYPE      SHP_VL10_SD_ORDER
              IS_VEPVG          TYPE      VEPVG
     CHANGING CS_POSTAB         TYPE      SHP_VL10_ITEM
              CF_SUBRC          TYPE      SYSUBRC.
CF_SUBRC = 0.
* cs_postab-zzfield = ......              "add new field to List
* if xxxxxxx = yyyyyyy.
*    cf_subrc = 1.                         "Exclude this index from List
* endif.
ENDFORM.                    " POSTAB_VEPVG_FILL_USER
I hope this helps you
Regards
Eduardo

How to restrict the Number of attachments

Hi All,
I would like to restrict the Number of Attachments,
I found many threads on how to restrict the size on the attachments.
Is there any standard way(profile or setup) to restrict the number of attachments
Other Option is
When the user try to add attachments, I need to get the Entity, PRIMARY key and
query FND_ATTACHED_DOCUMENTS count and through an error message.
Not sure how easy it is.
If anybody tried this requirement please share the logic to achieve the same.
Thanks,
With Regards,
Kali.

Hi All,
I have achieved using the below logic, in the ProcessFormRequest,
String eventParam = pageContext.getParameter(EVENT_PARAM);
if("oaAddAttachment".equals(eventParam))
String pkValue = pageContext.getParameter("PKEYID");
String attachmentCountQry = "SELECT count(*) FROM fnd_attached_documents WHERE entity_name = <EONAME> AND pk1_value = "+pkValue ;
//Execute the query and get the count,
int attachmentsCountInt = executeQuery(attachmentCountQry );
if(attachmentsCountInt >=2)
throw new OAException("Add only 2 attachments");
With Regards,
Kali.

How to get the list of batch jobs running in a specific application server

Hi Team,
I am trying to check in SM37 if there is any specific condition to get the list of batch jobs assigned to a specific target server but cant find any.
Is there is way to find the list of batch jobs assigned to run in one specific application server.( Target server specified in SM36 while job creation)

Hello,
This is what you can do in SM37.
Execute the list of batch jobs, when the result appears on the screen edit the ALV grid via CTRL+F7.
Now add the following columns "TargetServ" and "Executing server".
You will now have two extra columns in your result list.
TargetServr contains the value of the application server where the job should run when you have explicitely filled it in.
Often this is empty, this means that at runtime SAP will determine itself on which application server the job will run (depending of course where the BGD processes are defined).
Executing server is filled in always for all executed jobs, this is the actual application server where the job has run.
You can also add these two fields in your initial selection screen of SM37 by using the "Extended job selection" button.
I hope this isusefull.
Wim

How to restrict the number of items in Sales Contract - QCTR

Hi,
Is there any standard way or BADI exit to restrict the number of items in the Sales Contract?(QCTR). I want to restrict number of items in the Sales Contract. Ex - Contract A - Max of 10 ITems(Materials); Contract B - Max of 20 Items(Materials).
Thanks in advance.,
Robin

you can use ORDER_SAVE badi and check before method you can use CRM_ORDER_READ FM and count line items , if count is more than allowed number you can raise RAISE DONOTSAVE exception and issue a message to user. hope it helps you.

How to reduce the number of data blocks used by table

Hi,
I was trying to reduce the space usage of a particular table of my apex application which stores blob content and therefore deleted many records from it.
However, the data block usage remained the same as before.
I have tried to 'analyze' the table and validate the structure,but am unable to overcome this problem.
Could someone throw some light on what needs to be to reduce the number of data blocks used by this table?
Best Regards,
Priya Jetley

Priya:
It is likely that the BLOB content defined in your table is being stored 'Out-of-Line'. This means that the LOB columns are stored in segments of their own. These then are the segments that may need shrinking.
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14249/adlob_tables.htm#i1006363
Varad

How to restrict the number of FULL synchronization?

Hi I would like to restrict the full synchronization (less than 5 FULL synchronization).
How can I do?
In which table i can check out?
Thanks for your answer

If the client syncs in high priority mode, complete refresh publication items will be bypassed. Also, there is a column in c$all_client_items, CRR, that is set to 'Y' if a complete refresh has been requested.

Number of batch jobs used up

Hi Experts,
If process chain uses an abap routine or abap as process to process multiple loadings, how many batch processes are being used by this process chain?
Hope to get some advise.
Thanks,
Ernesta Corvino

Dear Sat,
Thanks! Points awarded.
If the process chain process, containing either abap or infopackage having abap routine in data selection, that triggers multiple loads, but one after the other, there will be 1 batch job for each load but only 1 batch will be running since the loads are in sequential order?
What if one of these batches fails? Will the subsequent job still run and in a new batch job?
Thanks!
Ernesta Corvino

ATG ID Generator, how to restrict the number of digits

Hi,
I have a requirement to generate IDs those has 6 digits. None of the ids should contain more than or less than 6 digits. How can I limit this using ATG id generator?
If I give my seed as 100001, then will it start generating numbers greater than this value? Is there any OOTB method to give a maximum value? Or should I need to override the postGenerateLongId() to give a max check?
Please advice.
Thanks,
R

Hi Rajeev,
This is not recommended. ATG GSARepositories do not work tend to work with a limited id space; nor do they help to generate ids within such a limited space. GSARepositories tend to "waste" ids. Basically, they do not support a realistic limit on the id space.
You may want to consider making a new property to represent this limited id value for presumably a 3rd party system with stricter limits on ids. And allow the GSA items to have their own separate id generated by the IdGenerator (configured normally).
If you were to attempt to generate 6-digit ids using the IdGenerator, you would obviously have to tweak the seed value and will want to shrink the batch size, potentially all the way down to 1 (which would force it to go to the database for every single id -- a potential performance issue). This is to keep ATG code from skipping ids and using up your id space too quickly. ATG would also use up the ids in any transient items that are discarded without being persisted, so there's no guarantee of consecutive ids for the persisted items. But if you can get all this work sufficiently and aren't creating too many items, you might be able to get it to work. There's no way to set an upper limit on an IdGenerator, but that's not pertinent. If you ever reached the upper limit, this whole scheme will breakdown regardless of what you do. That's why I strongly discourage you from doing this; especially for the actual repository id.
Your best best may be to write custom code to do this using a property separate from the repository id, and then you can ensure all your criteria are met.
Thanks.
Nick Glover
Oracle Support for ATG Products

How to restrict the number of client connections.

Dear All,
I have an Oracle Database version 9.2.0.1 in a Windows server 2000. I created a database users prod1 in this database. Its a 10 member team. I have to make changes so that, at a single point of time there should be only 2 members connected to the database simultaneously using the id prod1. How do I perform this request?
Thanks in advance
With Regards,
Santhosh

Create a profile with session_per_user (concurrent session) as needed and then assign this profile to prod1 user, in your case.
CREATE PROFILE "REST_USERS"
LIMIT SESSIONS_PER_USER 2
alter user prod1 profile rest_users;
Parameter RESOURCE_LIMIT must be set to TRUE in the init.ora file.
Jaffar
Message was edited by:
The Human Fly

How to restrict the number of error messages appearing in af:messages

Hii all....
Ihave customized the error messages which are produced when a constraint in a database are voilated using the following links
http://download-west.oracle.com/docs/cd/B32110_01/web.1013/b25947/web_val.htm#CIHJBIDJ
and by overriding the ListResourceBundle using the following link:http://one-size-doesnt-fit-all.blogspot.com/2007/05/dont-constrain-yourself-displaying.html
Now my problem is say, when a primary key is voilated i get repeated error messages and some unwanted error messages like 2,4(which are again repeated) as show below:
1.Empno - Employee Already Exists!!!
2.Empno - Attribute Empno in AppModule.EmpVO1 is required
3.Empno - Employee Already Exists!!!
4.Empno - Attribute Empno in AppModule.EmpVO1 is required
Now, i want the user to only see error numbered 1 and rest 2,3,4 should not be displayed on the screen ......plzzz knidly help me.

Hi,
In your ErrorHandler, override the method getDisplayMessage and in it add whatever message you'd like. Something like this:
    @Override
    public String getDisplayMessage(BindingContext bindingContext, Exception exception) {
        FacesContext fctx = FacesContext.getCurrentInstance();
        Iterator<FacesMessage> iterator = fctx.getMessages();
        if (exception instanceof JboException) {
            // do something (or nothing)
        } else if (exception instanceof UniqueNameException) {
            // add some message
            if (!iterator.hasNext()) fctx.addMessage(null, new FacesMessage(FacesMessage.SEVERITY_ERROR, "", "This is an UniqueNameException!");
        return null;
{code}
You can also try add some code to manipulate the iterator and remove all the messages, and then add only the one you want the user to see.
Pedja

To restrict the number of characters in the Paragraph text box

Hi Experts,
I have created a custom container on my screen using module pool programming.
Here I need to restrict the number of characters to be entered to 250.
Please tell me how to restrict the number of characters.
Sharon

Hi Rich,
I'm also facing the same problem; when i'm trying to use this method LIMIT_TEXT than i'm getting error saying that this method is protected or private. Please let me know how to access the protected method in this case. Code pertaining to this will be very helpful.
Thanks & Regards,
Megha

How to restrict the Copying/printing of the file from document

Hi..
Case:
1. I have a document number it has three files in it.I want to locked the files from priniting and copying but not from opening/displaying.
2. I am using content server for storing the DMS documents.How to restrict the number of attachments that can be uploaed in one document number?
3.How to restrict the maximum size that can be uploaded against one document number?
Sandip

Hi Sandip,
1. I have a document number it has three files in it.I want to locked the files from priniting and copying but not from opening/displaying.
In DC30 transaction,in Workstation application for network,disable the print option.Will ensure users will not be able to print the originals.
2. I am using content server for storing the DMS documents.How to restrict the number of attachments that can be uploaed in one document number?
See if your ABAPer can use the BADI 'DOCUMENT_MAIN01' with method 'BEFORE_SAVE' to handle this check.
3.How to restrict the maximum size that can be uploaded against one document number?
Believe you are using kPro as a storage option.If this is the case,then there is no setting available to limit the file size for upload.See if your Basis guy can set an upper limit for file size in IIS setting for your content server.
If you are using SAP DB as a storage option(not recommended though),then use the field File Size in DC10 transaction,Define Document Types to effect a file size limit.
P.S. Would appreciate incase you could close the threads which have been answered satisfactorily.
Regards,
Pradeepkumar Haragoldavar

How to restrict the number of batch jobs used by middleware?

Similar Messages

Maybe you are looking for