How to reterive the droped user?

Hi
I have dropped the user, example xyz. This user contains the lot of tables. Now i want to reterive the user with all the tables.
Please help me. Thanks in advance.
Regards
Sathya

May be you want to look into flashback
http://www.oracle.com/technology/deploy/availability/htdocs/Flashback_Overview.htm
you can restore to previous state to the time of point in DB. If you want to ask you DBA
Not sure of USER though
HTH

Similar Messages

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
<b>How to find the exact user-exit for your requirement.</b>
1.     You can check the user exists using transaction SE85.
2.     Repository Information System -> Enhancements -> Customer exits
3.     You can search the user-exits by package name.
4.     Double click on each exit name to check the function module exits.
<b>The procedure to find the package name.</b>
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
<b>Checking if the user-exit is getting triggered or not.</b>
1.     Open the user exit function module (that you have got in step 4) in Tcode SE37.
2.     Click on where used button. In the pop up that immediately appears choose only programs .
3.     You will get a list of programs. Double click on the program name.
4.     You will get the list of location where this function module user exit is used.
5.     Place session break points at each of these location ( at each CALL FUNCTION statement)
6.     Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the ME29N 'USER EXIT' when our save the release PO after.

How to find the ME29N 'USER EXIT' when our save the release PO after.
which user exit will be used?
thanks.
alex.

Hi,
process :
    go to tranx code :   ME29N ,
       System---->Status , here copy the program name (SAPLMEGUI),
     go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
     tranx code : CMOD , Utilites--->Sap Enanchement,
                                     specify the package name : ME
                                      and execute, displays a list of exits ,
                             and find out our suitable exit based on requirement.
check these :   EXIT_SAPMM06E_021
reg
Siva

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to get the Current User on the UI page?

All,
Could you please let me know how to get the Current user on the UI input page , i need to display the current user ID when some one clicks the submit button, i want o get the current user to display in the javascript alert box.
Edited by: 951930 on Oct 24, 2012 12:21 PM

lucky,
my schema has already defined for
<user mapField="USER_ID" default="%CurrentUser"/>
and in my UI page
<td oraLabel="user"></td><td oraField="user" id="userId" ></td>
and my javascript
function showUserId () {
var curUser = document.getElementById('userId').value;
alert(curUser);
and i have called this function on my submit button, but i am not able to get Current Logged User ID value to show in the alert nor able to show the current logged user on the UI page.
my requirement is on custom UI page i need to show Current Logged User in one corner of the page and also need to show the same user in alert when he submits the button.
Appreciate for the help.
Edited by: 951930 on Oct 25, 2012 8:42 AM
Edited by: 951930 on Oct 25, 2012 9:06 AM

How to get the current user logon to portal?

Hi Gurus,
How to get the current user who logged into portal.
I have a webdynpro requirement where in which I have to get the current user id who loggedinto portal which will be the input parameter of the BAPI(adaptive RFC model) which will return me employee number of the particular user.
Can anyone send me the code to retrive the user id through webdynpro application..........
Pts will be rewarded for useful inputs......
Thanks in Advance,
Dharani

Hi Dharani,
Using UMEfactory u can do that...
1. create one input field,
2. create one attribute called Uid
3. assign Uid attribute to the input field
4. type the following code in Doinit() method
            String uid = wdContext.currentContextElement().getUid();
     try {
     IUser user = UMFactory.getUserFactory().
     getUserByLogonID(uid);
     String userName = user.getDisplayName();
     } catch (UMException ex) {
      e.toString();
5. after that go to Portal create one iview assign to particular user. then u get into the user details...
thats it
Regards,
P.Manivannan

How to show the login user Id in the upper right corner of each page?

Hi,
I was wondering how to show the login user Id in the upper right corner of each page?
thanks so much!
cchu

Cchu,
The easy question first: applying a style to the welcome message. If you look at the page source, you'll see that #WELCOME_USER# is expanded to <div class="app-user">Welcome: DEMO</div> So to change the style of the message, you need to tweak the style of the app-user div in your CSS, or override it in a style block in your HTML header.
Now, the tougher question: why the text is wrapping for you. And, really, without seeing your entire page, I can't give a full answer. But I'd suggest that what's most likely happening is that the table column you're putting it in is too narrow, so it's wrapping; try replacing the td tag with <td nowrap="nowrap"> This will force the column to be wide enough to display the full message, but might result in weird formatting elsewhere on the page (depending on what all is in your table).
-David

How to use the admin user account in reports and dashboards?

Hi Everyone,
I want to use the admin user account in report and dashboard connections. But the Hyperion is automatically using the current user's credentials to fetch data.
Hyperion 11.1.1.1
Thanks
Syantan

This has been posted in the essbase forum > How to use the admin user account in reports and dashboards?
Cheers
John
http://john-goodwin.blogspot.com/

How to increas the max user process number in Solaris 11?

Hey
Could anyone told me how to increas the max user process number in Solaris 11? I tried below as described in https://blogs.oracle.com/hasham/entry/solaris_10_increasing_number_of , but it cannot work.
set pidmax=60000
set maxusers = 4096
set maxuprc = 50000
set max_nprocs = 50000
Thanks!
Edited by: 966272 on Oct 18, 2012 7:38 AM

Perhaps you should work your original forum post:
Oracle 11g installation fail on Solaris 11 64bit - ORA-00443
through to a resolution before you complicate things that likely don't apply.
You make an assumption in that other post about exceeding various maximums. That may be true or it may not be true. Since the installation of a database program seems to be your actual expectation, go work that forum thread instead.

How to map the bulk users with the required roles in portal at one time

Hi,
Would anyone tell me how to map the bulk users with the required roles in portal at one time?

Thanks for all the reply.
<b>I need to assign 1 or 2 group to n((eg) 1000)number of users</b>
I tried the first option like
[group]
gid=
gdesc=
user=
Thr problem with this is I could n't put more no of users in the notepad.
I would be able to put only 150 users in the single line of notepad. If it goes to next line it is not working.
I tried creating seperate notepad but in Import it says "exists"
I'm not sure about LDAP. Would anyone explain me the best approach to do this.

How to see the generic users in 11.5.10 which have not been enddated

Hi all,
Can anybody let me know how to see the generic users in 11.5.10 who are not enddated?
Thanks.

if I understand you correctly, you're looking for the all the out-of-the-box accounts.
You could use something like this:
select * from fnd_user
where start_date = to_date( '01/01/1951','mm/dd/yyyy')
or where creation_date = the apps install date
Be warned that many of these accounts are used internally and shouldn't be end-dated.

How to see the active users in the AS JAVA?

Hi Experts,
In as java how to see the active users in the system.Kindly,tell me step by step details to find the active users.As I'm new to the Netweaver administration.
Thanks,
Reddy

Hi,
You can find the login sessions with Timestamp and User in Visual Admin under SecurityProvider and tab Runtime and Login sessions. You might also get these details in NWA->Monitoring->Availability.
Regards, Rahul

How to check the unused users in portal.

Hi Guru,
We are doing auditing in Portal server.Can any tell us
How to check the unused users in portal?.
Regards,
Vivek

Use portal activity reporting for monitoring the users. This way you can monitor the users in the portal who logged on to the portal.
Below are things you can monitor from portal activity report iview
1) number of users logged on during the period of time.
2) Details of the users who logged on
3) monitoring particular iview/page
Check the below threads for more help
http://help.sap.com/saphelp_nw04s/helpdata/en/47/87329cc84a199ce10000000a42189d/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/47/87346dc84a199ce10000000a42189d/frameset.htm
Raghu

How to find the concurrent user licenses usuage

Hi,
Can you someone tell me how to find the concurrent user licenses usage. if i go to CM C -> Settings -> View Global System Metrics then it is showing strange number in the area of peak licenses used since deployment (more than 5K),
Is there is any Bug or how to refer this?
We are using BI4.0 SP5

Hello Satheesh,
Its is possible to track concurrent user licenses usage by using BI 4 monitoring.
Please check below:
Monitoring Concurrent Sessions in SAP BI Platform 4.0 and BusinessObjects Enterprise XI3.1
-Mahesh

How to get the NT user id and passwd

Hi,
How to get the NT user id and passwd using form 6i

You cannot get the password. Password are stored in an encrypted format. Almost never decrypted (as a security meassure). Authentication is performed by encrypting the supplied password and matching that against the stored encrypted password.
Think about it.. just how dangerous it will be to have a function that can dump NT users and their passwords for you. How can you ever expect to "simply decrypt a password"?
As for getting the user name. See the Win32 kernel API call GetCurrentUser(). Also note that there is a big difference as to the owner/user of a server process/thread versus the end-user of client application (possibly running on another PC) that is making the call to the server.
Of course, none of this is related to SQL or PL/SQL - which is what I believe the subject matter of this forum is... Kindly suggest that in future you pay attention to posting the correct subject material to the correct forum.

How to reterive the droped user?

Similar Messages

Maybe you are looking for