How To Retrieve the Maintenance Package in PM Module for the Maint. Strateg

Hi All,
I am trying to retrieve the 'Maintenance cycle' for a Package in the Maintenace package of the Maintenance strategy.
I tried table T351P, but except 'Maintenance Cycle' i can see all other fields.
In IP11 and in IP03 transactions i can see the Maintenace cycle field in the grid where maintenance packages are listed.
But could not find a way to retrieve the maintenance cycle.
Appreciate if you guys could help me out in getting the Maintenance Cylce.
Cheers,
Jaffer Ali.S

Tortsen,
I tried the solution suggested by you.Here's what i did :
I executed the  ARCHIV_GET_CONNECTIONS with input field  OBJECTTYPE values as BUS2104.It gives me some entries in the output connections table.From the results , i picked up the ARCHIV_ID and ARC_DOC_ID fields as suggested by you.
I went to execute SCMS_AO_TABLE_GET  with above two values as import parameters and COMP_ID = "data".But it does not give me any output.It says "HTTP error: 404 Not Found". Any idea why is it so?
Then i went to try SCMS_DOC_URL_READ .I find here that there are two mandatory parameters viz . STOR_CAT , DOC_ID.I tried giving the ARCHIV_ID  value above as value for  STOR_CAT . But it does not recognize it.Then i went to the table SDOKSTCA to look for any valid values for STOR_CAT , but i am not sure which one applies to my scenario.How do i find this?
i'll appreciate any help.
Thanks,
Karambir Singh

Similar Messages

  • How to use more than one indirect valuation module for the same wage type

    Is it possible and how to use the u201CIndirect valuation based on master data: ICOMPu201D configuration to default the NUMBER and at the SAME TIME to use u201CDefine valuation of base wage types usingu201D to default the AMOUNT from one/two WTs ?

    You can use the the same wage type for both number and amount but you can't assign 2 indirect valuation method for the same wage type at 1 time. I would rather suggest you to go for some customer specific indirect valuation instead of the standard one. You can use BAdI HR_INDVAL for the same.

  • I don't know of there is anyone than can fix this age old Apple problem.   Does anyone know how to retrieve things under an old Apple ID when the email used for that account no longer exists? I am trying to update a number of apps that was bought under an

    I don't know of there is anyone than can fix this age old Apple problem.   Does anyone know how to retrieve apps under an old Apple ID when the email used for that account no longer exists & I can't remember the password? After speaking with Apple Acct. Security, I got the security Q right but my birthday was wrong! They wanted the serial number from my phone that was 3 iPhones ago! Seriously??!!
    Any updated way to work around this? No Apple people can correct it.
    Thanks,
    Joe

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (122986)

  • PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

    PS CC 2014 DNG and RAW 8.5 did not update with the rest of the CC package. I downloaded/installed the DNG/RAW converter but how do you install w/i CC 2014 plugins

    Thanks John. I have tried solutions 1 to 3 from (-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.h tml) and they do not work. So I presume that all I can do is to remove all 25 CC applications and start again!
    Incidently, ( http://www.adobe.com/downloads/updates/ ) does not list Adobe Camera Raw 8.4 as an update even though Adobe have announced that it is available (http://blogs.adobe.com/lightroomjournal/2014/04/camera-raw-8-4-and-dng-converter-8-4-now-a vailable.html). The same applies for Adobe Premiere Pro 7.2.2 (http://blogs.adobe.com/premierepro/2014/04/premiere-pro-cc-7-2-2.html). If they are not available this would explain why I cannot download them but I am very suprised that Adobe didn't mention this when I contacted them.
    Anyway thanks again

  • How to convert the class in the one package to same class in the other pack

    How to convert the class in the one package to same class in the other package
    example:
    BeanDTO.java
    package cho3.hello.bean;
    public class BeanDTO {
    private String name;
    private int age;
    * @return
    public int getAge() {
         return age;
    * @return
    public String getName() {
         return name;
    * @param i
    public void setAge(int i) {
         age = i;
    * @param string
    public void setName(String string) {
         name = string;
    BeanDTO.java in other package
    package ch03.hello;
    public class BeanDTO {
    private String name;
    private int age;
    * @return
    public int getAge() {
         return age;
    * @return
    public String getName() {
         return name;
    * @param i
    public void setAge(int i) {
         age = i;
    * @param string
    public void setName(String string) {
         name = string;
    My converter lass lokks like
    public class BeanUtilTest {
         public static void main(String[] args) {
              try
                   ch03.hello.BeanDTO bean=new ch03.hello.BeanDTO();
              bean.setAge(10);
              bean.setName("mahesh");
              cho3.hello.bean.BeanDTO beanDto=new cho3.hello.bean.BeanDTO();
              ClassConverter classconv=new ClassConverter();
              //classconv.
              System.out.println("hi "+beanDto.getClass().toString());
              System.out.println("hi helli "+bean.toString()+" "+bean.getAge()+" "+bean.getName()+" "+bean.getClass());
              Object b=classconv.convert(beanDto.getClass(),(Object)bean);
              System.out.println(b.toString());
              beanDto= (cho3.hello.bean.BeanDTO)b;
              System.out.println(" "+beanDto.getAge()+" "+beanDto.getName() );
              }catch(Exception e)
                   e.printStackTrace();
    But its giving class cast exception. Please help on this..

    Do you mean "two different layers" as in separate JVMs or "two different layers" as in functional areas running within the same JVM.
    In either case, if the first class is actually semantically and functionally the same as the second (and they are always intended to be the same) then import and and use the first class in place of the second. That's beyond any question of how to get the data of the first into the second if and when you need to.
    Once you make the breakthrough and use one class instead of two I'd guess that almost solves your problem. But if you want to describe your architecture a little that would help others pin down want you're trying to do.

  • Till know I have a single license for Photoshop Year contract with monthly payment. I'm now a student in the "Swiss International College of Osteopathie". How and where can I chance  my contract to have the whole package as a student for less?

    Till know I have a single license for Photoshop Year contract with monthly payment.
    I'm now a student in the "Swiss International College of Osteopathie".
    How and where can I chance  my contract to have the whole package as a student for less?

    Start here https://creative.adobe.com/join/edu
    One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
    http://www.adobe.com/products/creativecloud/students.edu.html
    https://creative.adobe.com/plans?plan=edu
    http://www.adobe.com/education/students/student-eligibility-guide.edu.html
    ID Proof http://www.adobe.com/store/au_edu/academic_id.html

  • Packaging a .bar file for the BlackBerry Tablet (Playbook) Simulator Using Command Line.

    Hi there, I've been trying to deploy one of my AIR apps on the BlackBerry Tablet (PlayBook) Simulator and and have run into a problem packaging the .bar file using the command line.  I started this off by reading the article at:
    http://www.adobe.com/devnet/devices/articles/blackberry_playbook_battery.html
    I followed some of the steps there, but found this article on how to package my files using a command line more helpful (the Adobe article doesn't even explain how to package the .bar file using the command line):
    http://supportforums.blackberry.com/t5/Tablet-OS-SDK-for-Adobe-AIR/Compile-and-Debug-witho ut-Flash-Builder-Using-a-Command-Line/ta-p/628675
    Everything was going great until I went to compile my application and received the following error:
    Exception in thread "main" java.lang.NoClassDefFoundError: com/qnx/bbt/airpackag
    er/BarAirPackager
    Caused by: java.lang.ClassNotFoundException: com.qnx.bbt.airpackager.BarAirPacka
    ger
            at java.net.URLClassLoader$1.run(Unknown Source)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.net.URLClassLoader.findClass(Unknown Source)
            at java.lang.ClassLoader.loadClass(Unknown Source)
            at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
            at java.lang.ClassLoader.loadClass(Unknown Source)
            at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    Could not find the main class: com.qnx.bbt.airpackager.BarAirPackager.  Program
    will exit.
    Has anyone run into this issue when trying to package a .bar file for the BlackBerry Tablet (Playbook) Simulator?  I've tried using a SWF published in CS5 and CS4.

    Just thought I'd reply to my own post, in case someone else runs into this problem.  Make sure you have the latest and greatest versions of the JDK and JRE installed on your system, in addition to the requirements listed in BlackBerry's list of installs:
    http://us.blackberry.com/developers/tablet/adobe.jsp

  • How to improve the load performance while using Datasources for the Invoice

    HI All,
    How to improve the  load performance while using Datasources for the Invoice . Actually my invoice load (Appx. 0.4 M records) is taking very long time nearly ~16 to 18 hrs  to update data from R/3 to 0ASA_DS01.
    If I load through flat file it will load with in ~20 Min for the same amount of data.
    Please suggest how to improve load performance.
    PS: I have done the Inpo package settings as per the OSS note.
    Regads
    Srininivasarao.Namburi.

    Hi Srinivas,
    Please refer to my blog posting [/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction|/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction] which gives the details about the package size setting for extractors. I am sure that will be helpful in your case.
    Thanks,
    Divyesh
    Edited by: Divyesh Jain on Jul 20, 2010 8:47 PM

  • How long should I let my Iphone 5 charge for the first time?

    How long should I let my Iphone 5 charge for the first time?

    nokhodi wrote:
    How long should I let my Iphone 5 charge for the first time?
    Till it reaches 100%  >  See here  >  http://support.apple.com/kb/HT1476
    More Info here  >  http://www.apple.com/batteries/iphone.html
    From the above link...
    For proper maintenance of a lithium-based battery, it’s important to keep the electrons in it moving occasionally. Be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).

  • I am trying to download whatsapp on my iphone 4  when I hit the redeem button it shows I have $14.73 in my account, but asks for a code.  I tried my itunes card code but it says it was already used. How can I tap into my account to pay for the app?

    I am trying to download whatsapp on my iphone 4.  It asks for my apple id and password and when I sign in , it gets me to a page that says redeem ...when I hit redeem it shows I have a $14 balance in my account and asks for a code  -  I tried entering the itunes card number...it says it has already been used.  How do I tap into my account to pay for the app? 

    It says   at the top      under Redeem after I touched that:
              $14.73
    Account: [email protected]   (my account name)
    Enter your Gift Card or Download Coad

  • I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

    I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

    If the machine was upgraded to Lion 10.7.x by the original owner then you bought an illegal license of Lion and also of any other applications that the seller  said came pre-installed, this assumes the seller did not include original install media. In that case you need to contact the seller for the original install DVDs that came with the machine re-install up to Snow Leopard 10.6.8 and then purchase Mountain Lion ($20) and the applications you want or need. If the seller cannot come up with the original install discs then you can buy them from a nominal cost from AppleCare..

  • How can I create a new E-mail address for the Marketing Manager

    Hullo,
    how can I create a new E-mail address for the Marketing Manager (i.e. marketing professional role in SAP CRM) please.
    That when you go and create a new E-mail campaign you need to choose an E-mail form in addition to the E-mail address of the Marketing Manager.
    Kind Regards.

    Hi Alhussien
    Add it to his Position in the Organisational Model. Transaction PPOMA_CRM.
    Under there address section is an option to populate the email address.
    Regards
    Arden

  • Before I updated my iPod I had all of the songs to an album that I bought on iTunes. After I updated my iPod I only have 5 of those songs from the album. I would like to know how I can get the rest of the songs cause I already paid for the album and I wen

    Before I updated my iPod I had all of the songs to an album that I bought on iTunes. After I updated my iPod I only have 5 of those songs from the album. I would like to know how I can get the rest of the songs cause I already paid for the album and I went on my computer and it said that I have to pay for them even though I already paid for the whole album. So what do I do?

    Sync with the same computer iTunes that you normally sync with.

  • Downloaded the latest itunes and when i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor

    When `ve downloaded the latest itunes and then i go to install it i get a message saying there is a problem with this windows installer package a program required for the install to complete could not be run, contact your support personnal or package vendor any ideas anyone ? thanks

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • HT1349 My Macbook Pro was stolen and I need the serial number. How would I find this? I need it for the police report so if I could get answers soon that would be great, thanks :)

    How would I find this? I need it for the police report so if I could get answers soon that would be great, thanks

    Lanlani wrote:
    ... It there any other solution ?
    Consider using this site: http://www.stolenlostfound.org/
    This is Apple's official word on the subject:
    Reporting a lost or stolen Apple product
    If you have lost or found an Apple product, please contact your local law enforcement agency to report it. Although Apple does not have a process to track or flag lost or stolen product, you can use My Support Profile to find a list of serial numbers for items purchased or registered with your Apple ID.

Maybe you are looking for

  • Help: I've tried everything... Active X controls for Flash Player could not be registered

    I have tried everything I could thing of, find, and read on the internet to try to install Adobe Flash Player on my computer I have Windows Vista- 32 bit, Home Premium edition I have Adobe CS4 Master Collection I have Windows Sidebar Pandora (which i

  • Handling Batch Input errors in workflow

    Greetings Friends, I got a Subworkflow (Pa. process) to get aproves to unblock a Salesdocument. After everyone aproves it, the process return to my main-workflow for a Batch input inside in a background task. But the batch input can result in somekin

  • Trex 7.0 and ISA 5.0 Config guides

    Hi Can some tell me where to get Trex 7.0 and ISA 5.0 Config guides. I see significant changes here from Trex 6.1 ans ISA 4.0. Thanks in advance, Biren Bugati

  • Only available when document rights are enabled

    Hi, Adobe 9.4.6, Ubuntu Natty When I open a pdf file with PDFXchange reader running in Wine, I can highlight text in the file. When I open the same file with Adobe I cant even dipslay the highlight toolbar, it says "Only available when document right

  • Non display of old Customers, Suppliers, Sales Reps and Staff

    Is it possible to hide or not display old information in standard searches such as: Customers Suppliers Items (can be done by unticking Sales and Purchase documents) Sales Reps Staff Members I know we can add formatted searches, however more often th