How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

Hi Experts,
We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
So, for some reason the system message text is not getting output in ALV-->Dump!!
So, found a NOTE causing this problem!!
So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
thanq
Edited by: Srinivas on Jan 24, 2008 4:32 PM

Hi
In SNOTE tcode, select the Note that you implemented and click on 'RESET SAP Note Implementation'
shylesh

Similar Messages

RUn time error while saving po    Field symbol has not yet been assigned.

Hi Experts,
I am getting abap dump while saving PO in ME21N plz seee the below dump plzzzzzzzzzzzzzzzzzzzzz help me
Runtime Errors         GETWA_NOT_ASSIGNED
Date and Time          19.06.2009 11:24:46
Short dump has not been completely stored (too big)
Short text
     Field symbol has not yet been assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLKKBL" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     You attempted to access an unassigned field symbol
     (data segment 106).
     This error may occur if
     - You address a typed field symbol before it has been set with
       ASSIGN
     - You address a field symbol that pointed to the line of an
       internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "GETWA_NOT_ASSIGNED" " "
    "SAPLKKBL" or "LKKBLF99"
    "GEN_FIELD_OUT2"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
   In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
em environment
SAP-Release 700
Application server... "gplqty"
Network address...... "128.12.0.19"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "GPLQTY"
Database type..... "MSSQL"
Database name..... "GPQ"
Database user ID.. "gpq"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Aug 4 2008 02:33:25"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 172
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
   NT 6.0"
Memory consumption
Roll.... 16192
EM...... 16759360
Heap.... 0
Page.... 237568
MM Used. 12036016
MM Free. 530432
er and Transaction
Client.............. 410
User................ "SAP_SUPPORT"
Language key........ "E"
Transaction......... "ME21N "
Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
Program............. "SAPLKKBL"
Screen.............. "SAPLKKBL 0500"
Screen line......... 3
Information on where terminated
    Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
    The main program was "RM_MEPO_GUI ".
    In the source code you have the termination point in line 2908
    of the (Include) program "LKKBLF99".
Source Code Extract
Line SourceCde
2878       else.
2879         assign <fs11> to <field>.
2880         gs_fc = gs_sfc11.
2881       endif.
2882     when 012.
2883       if gs_out_flags-slave ne 'X'.
2884         assign <fm12> to <field>.
2885         gs_fc = gs_mfc12.
2886       else.
2887         assign <fs12> to <field>.
2888         gs_fc = gs_sfc12.
2889       endif.
2890     when 013.
2891       if gs_out_flags-slave ne 'X'.
2892         assign <fm13> to <field>.
2893         gs_fc = gs_mfc13.
2894       else.
2895         assign <fs13> to <field>.
2896         gs_fc = gs_sfc13.
2897       endif.
2898     when 014.
2899       if gs_out_flags-slave ne 'X'.

Hi,
this error occurs when you try to address a field-symbol before it has been assigned to a field or
the assignment has failed.
Use following code to remove this dump
Assign <mara-matnr> to <fs>.
if sy-subrc <> 0.
Error Message.
Endif.
Hope it helps,
Raj

Field symbol has not yet been assigned. ???

Dear Experts ,
W hen i tried to execute my program this error appears :
Short text
    Field symbol has not yet been assigned.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLSLVC" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to access an unassigned field symbol
    (data segment 32821).
    This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
    - You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
    - You address a global function interface, although the
      respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
and Here is my CODE :
*& Report ZPO
Report ZPO1.
type-pools slis.
PARAMETERS : PO_Doc like EKBE-EBELN DEFAULT '4800000007'.
PARAMETERS : Plant TYPE WERKS DEFAULT '1000'.
PARAMETERS : PO_ORG TYPE EKORG DEFAULT ''.
data TtlS type mara-wesch .
data TtlH type mara-wesch .
data Ttl type mara-wesch .
data ZEKBE type TABLE OF EKBE.
data ZEKBER type EKBE.
data ZEKPO type TABLE OF EKPO.
data ZEKPOR type EKPO.
data ZEKKOR TYPE EKKO.
data ZNAME1F type LFA1-LIFNR.
data ZWGBEZF TYPE T023T-WGBEZ.
data i type n.
data counter type n.
types : begin of SBAGDS,
Serial Type n, "Purchase Order
EBELN like EKKO-EBELN, "Purchase Order
MATNR like EKPO-MATNR, "Material
TXZ01 like EKPO-TXZ01, "Short Text
MATKL like EKPO-MATKL, "Material Group
WGBEZ like T023T-WGBEZ, "Material Group Desc"
SUBMI like EKKO-SUBMI, "GPM
CHARG like EKBE-CHARG, "Batch
LIFNR like EKKO-LIFNR, "Vendor
NAME1 like LFA1-NAME1, "Vendor Name
RECV like mara-wesch, "Received Quantity
REVR like mara-wesch, "Reversed Quantity
DELV like mara-wesch, "Delivered Quantity
end of SBAGDS .
DATA : BAGDS TYPE SBAGDS OCCURS 0 WITH HEADER LINE.
data Struc like BAGDS.
data: gr_table like BAGDS OCCURS 0 WITH HEADER LINE.
data: gt_fieldcat type slis_t_fieldcat_alv, gt_outtab type SBAGDS occurs 0 with header line.
INITIALIZATION.
i = 0.
counter = 0 .
perform field_cat_init using gt_fieldcat[].
FORM field_cat_init using rt_fieldcat type slis_t_fieldcat_alv.
data: ls_fieldcat type slis_fieldcat_alv,
         pos type i value 1.
clear LS_FIELDCAT.
*Column 1
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'Serial'.
ls_fieldcat-SELTEXT_L      = 'Serial'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 2
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'EBELN'.
ls_fieldcat-SELTEXT_L      = 'Purchase Order'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 3
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'MATNR'.
ls_fieldcat-SELTEXT_L      = 'Material'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 4
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'TXZ01'.
ls_fieldcat-SELTEXT_L      = 'Short Text'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 5
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'MATKL'.
ls_fieldcat-SELTEXT_L      = 'Material Group'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 6
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'WGBEZ'.
ls_fieldcat-SELTEXT_L      = 'Material Group Desc'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 7
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'SUBMI'.
ls_fieldcat-SELTEXT_L      = 'GPM'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 8
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'CHARG'.
ls_fieldcat-SELTEXT_L      = 'Batch'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 9
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'LIFNR'.
ls_fieldcat-SELTEXT_L      = 'Vendor'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 10
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'NAME1'.
ls_fieldcat-SELTEXT_L      = 'Vendor Name'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 11
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'RECV'.
ls_fieldcat-SELTEXT_L      = 'Received Quantity'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 12
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'REVR'.
ls_fieldcat-SELTEXT_L      = 'Reversed Quantity'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
*Column 13
ls_fieldcat-col_pos           = pos.
ls_fieldcat-fieldname        = 'DELV'.
ls_fieldcat-SELTEXT_L      = 'Delivered Quantity'.
ls_fieldcat-DDICTXT          = 'L'.
append ls_fieldcat to rt_fieldcat.
clear ls_fieldcat.
pos = pos + 1.
endform.
START-OF-SELECTION.
       select SINGLE * from EKKO into ZEKKOR where EBELN = PO_DOC.
       select SINGLE * from EKPO into ZEKPOR where EBELN = PO_DOC.
       select SINGLE NAME1 from LFA1 into ZNAME1F where LIFNR = ZEKKOR-LIFNR.
*         ' Buliding Structure
          Struc-EBELN = ZEKPOR-EBELN.
          Struc-SUBMI = ZEKKOR-SUBMI.
          Struc-LIFNR = ZEKKOR-LIFNR.
          Struc-Name1 = ZNAME1F.
       select * from EKPO into TABLE ZEKPO where EBELN = PO_Doc and WERKS = plant.
       LOOP at ZEKPO into ZEKPOR.
           select SINGLE WGBEZ from T023T into ZWGBEZF WHERE MATKL = ZEKPOR-MATKL .
           counter = counter + 1.
*         ' Buliding Structure
          Struc-Serial = counter.
          Struc-MATNR = ZEKPOR-MATNR.
          Struc-TXZ01 = ZEKPOR-TXZ01.
          Struc-MATKL = ZEKPOR-MATKL.
          Struc-WGBEZ = ZWGBEZF.
*          Calcualting Debit transactions from PO History
           select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'S'.
           LOOP AT ZEKBE INTO ZEKBER.
               TtlS = TtlS + ZEKBER-MENGE.
           ENDLOOP.
*          ' Buliding Structure
           Struc-CHARG = ZEKBER-CHARG.
           Struc-RECV = TtlS.
           Ttl = TtlS.
           clear TtlS.
*         Calcualting Credit transactions from PO History
         select * from EKBE into table ZEKBE where EBELN = PO_Doc and MATNR = ZEKPOR-MATNR and EBELP = ZEKPOR-EBELP and BWART NOT LIKE '' and SHKZG = 'H'.
           LOOP AT ZEKBE INTO ZEKBER.
               TtlH = TtlH + ZEKBER-MENGE.
           ENDLOOP.
*          ' Buliding Structure
           Struc-REVR = TtlH.
*          Calculating Total Delivered
           Ttl = Ttl - TtlH.
           clear TtlH.
*          ' Buliding Structure
           Struc-DELV = Ttl.
           clear Ttl.
*      Writtng ITAB
       APPEND Struc to BAGDS.
       ENDLOOP.
*      Reading ITAB
*       WRITE : / , 'ITAB Begin : '    .
*       loop at BAGDS into Struc.
*         counter = counter + 1.
*         write : /,'Serial : ',counter.
*         write : / ,'PO : ',Struc-EBELN.
*         write : / ,'Vendor : ',Struc-LIFNR.
*         write : / ,'Vendor Name : ',Struc-NAME1.
*         write : / ,'Material : ',Struc-MATNR.
*         write : /,'Short Text: ',Struc-TXZ01.
*         write : / ,'Model : ',Struc-MATKL.
*         write : / ,'Model Desc : ',Struc-WGBEZ.
*         write : /,'GPM : ',Struc-SUBMI.
*         write : /,'Lot : ',Struc-CHARG.
*         write : /,'Received : ',Struc-RECV.
*         write : /,'Reversed : ',Struc-REVR.
*         write : /,'Delivered : ',Struc-DELV,/,/,/.
*       ENDLOOP.
* Call ALV Grid Viewer
*BREAK-POINT.
gr_Table[] = BAGDS[].
   CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
             I_STRUCTURE_NAME   = 'SBAGDS'
             IT_FIELDCAT          = gt_fieldcat[]
        TABLES
             T_OUTTAB                  = gr_Table.
Please Advise
Edited by: Sap Sap on Jul 27, 2009 12:18 PM
Edited by: Sap Sap on Jul 27, 2009 12:22 PM
Edited by: Sap Sap on Jul 27, 2009 12:22 PM

Hi,
The problem seems to be in your ALV grid display.
The reason must be your field catalog.
Just check your fieldcatalog.
The value in the fieldname field of the fieldcatalog should be same as the fieldname in your internal table and should be in capital letters.
Probably you must have mistyped some field.
Kinldy check.
Regards,
Ankur Parab

Field symbol has not been assigned in Reuse_alv_grid_display

Hi Experts,
I display my output in alv grid format using REUSE_ALU_GRID_DISPLAY, there i have one editable field , when user click on save data that data will be saved , so in user command i write code like to check changed data
    DATA : REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
      IF REF_GRID IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            E_GRID = REF_GRID.
      ENDIF.
      IF NOT REF_GRID IS INITIAL.
        CALL METHOD REF_GRID->CHECK_CHANGED_DATA.
      ENDIF.
when i execute the report i get dump with message
field symbol has not been assigned .
when i try in debug mode when call method ref_grid->check_changed_data , i get dump ,
Please suggest me
Thanks & Regards
Krishna

Hi siva,
Check this thread [ALV with Edit and Save |editable ALv and SAVE criteria;
this will help u,
Thanks & regards
Kiran

RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned.

I am on the newest patches for basically all things related to BI, and some of them are giving me trouble. The problem I am now encountering is when I try to jump from my Purchasing Query to my Purchasing Line Items Query, I get an error, stating RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned. Does anybody know what this means? I haven't changed either query recently, and it was working just fine.
Any help is appreciated.
Thanks,
Owen

Hi
Record a RSTT trace by refering to the note : 899572, and then execute the trace in RSTT.If will throw a dump and chekc where the issue is.It is difficult to say why the error has occured just from teh error "RFC_ERROR_SYSTEM_FAILURE: Field symbol has not yet been assigned."
Regards, Hyma

Field symbol has not yet been defined-ALV Grid Display in Report

Hi all,
Iam calling a Function module for ALV grid display in Report programming. Its throwing the Error message Field Symbol has not yet defined. Can any one suggest what i have to do regarding it?

Hi,
<li> This is problem with fieldcatalog.
<li> Check field names or table name in small letters in quotes while building fieldcatalog internal table
<li> Check the fieldcatalog internal table , whether it has same fields as in data table which is shown using GRID_DISPLAY function module.
Thanks
Venkat.O

For 2 Zfields in Web UI, BSP err: Field symbol has not yet been assigned.

Hi,
I've created 3 ZFields (F1, F2, F3) in EEWB. I've assigned F1 in the configuration of Component WB (available fields to displayed fields). I can see ZField F1 in the Web UI.
But when i assign other 2 ZFields F2 & F3 in the configuration & check in Web UI, it showing the below error:
"Field symbol has not yet been assigned."
Anyone faced the similar issue, pls share the solution to fix this.
tnx in adv.
rgds,
balu

Hi there,
I think the problem is with the cookie handling. Cookies are really just raw data that needs to be placed into ABAP structure. This is something like the way I would do it....
Save Cookie
DATA: cookie type xstring.
EXPORT it_favourites FROM it_favourites TO DATA BUFFER cookie.
CALL METHOD cl_bsp_server_side_cookie=>set_server_cookie
    EXPORTING
      name                  = sy-uname
      application_name      = application_name
      application_namespace = application_namespace
      username              = sy-uname
      session_id            = session_id
      data_name             = 'COOKIE_ID_43CASE2'
      data_value            = cookie
      expiry_date_rel       = 7
      expiry_time_rel       = 0.
Retrieve cookie
CALL METHOD cl_bsp_server_side_cookie=>get_server_cookie
    EXPORTING
      name                  = sy-uname
      application_name      = application_name
      application_namespace = application_namespace
      username              = sy-uname
      session_id            = session_id
      data_name             = 'COOKIE_ID_43CASE2'
    CHANGING
      data_value            = cookie.
IF cookie IS NOT INITIAL.
    TRY.
        IMPORT it_favourites = it_favourites FROM DATA BUFFER cookie.
      CATCH cx_root INTO oref.
        " Error handling
    ENDTRY.
ENDIF.
Cheers
Graham Robbo

In t-code OBB8 - Short Dump "Field sysmbol has not yet been assigned"

Hi All,
While entering into the transaction OBB8, I am getting the dump "GETWA_NOT_ASSIGNED" "Field Symbol Not yet been assigned" in R/3 4.6c release. If anybody have idea about this please suggest ....
Thanks in advance.
Varsha.

Hi,
This dump is due to code corrections made through the SAP note 933848. To solve this dump, you should apply SAP Note 948961 first, and then apply the SAP Note 948967. Please take help of your ABAP Consultant to apply these SAP Notes. These notes can be accessed through service marketplace (www.service.sap.com).
There is no functional reason assigned for the dump. Code correction is the way to resolve this.
Hope this information helps you.

Error While Executing Report - "Field symbol has not yet been assigned."

Dear All,
I am using Cube 0PP_C01 which filled with data Source 2LIS_04_P_MATNR.
Based on this Cube I had developed a report.
0MRP_CONTRL characteristic filled using 0MATERIAL master data.
Authorization in this report is based on Characteristic 0MRP_CONTRL & 0PLANT.
While running report User gets error u201CField symbol has not yet been assignedu201D & Analyzer just quit.
Also getting dump in tcode ST22.
This problem occurs when limited authorization of 0MRP_CONTRL & 0PLANT assigned to user & if I provide full authorization 0BI_ALL then report runs fine.
When I will remove 0MATERIAL characteristic from report then Report runs fine & at a time when I put 0MATERIAL in the report its gives error.
Please suggest me what to do as I can not give user 0BI_ALL right in RSECADMIN.
Please help.
Regards,
Divyesh Khambhati.

Hello Shashank,
Thanks for your reply.
No material is not checked for authorization relevant.
Is it required to make 0MATERIAL to be checked as Authorization relevant ??
I had make 0MATERIAL authorization relevant & assign all material Authorization to User but still error coming..
I do not have any idea regarding this colon authorization, if possible can you explaine me how I can use this colon authorization ?
Divyesh Khambhati
Edited by: Divyesh M Khambhati on Oct 2, 2010 10:29 AM

Field Symbol has not been assigned

Hi,
While billing I am getting this ABAP runtime error and it says
Error in ABAP application program.
The current ABAP program "SAPLV60B " had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Please somebody help me.
Regards,
Ajit

HI all,
I am working on a standalone system and few days back I changed the copy control settings in F2 for checking something and later I undid the changes and compared with Standard F2 of other client.From that day this problem started.
The message also says to look for SAP note.Any idea about the usfeul note?
Regards,
Ajit

GETWA_NOT_ASSIGNED - Field symbol has not yet been assigned.

Hi Experts,
I am facing the following dump u201CGETWA_NOT_ASSIGNED u201C, Termination occurred in the ABAP program "SAPLDSVAS_GRAPH" - in u201CSET_EXTREME_VALUES".The main program was "RDSMOP_MAIN ".
In the source code you have the termination point in line 275 of the (Include) program "LDSVAS_GRAPHACI".
Friends I am facing this issue while generating EWA report for R3 server only, Iu2019m able to generate EWA report for other servers like BI, CRM. But while creating EWA report for ERP server Iu2019m getting this dump.
Certain thing I would like to highlight. Recently we did a support pack upgrade, mine is a Solman 7.0 EHP1 system. We update the support pack up to " SPS 6 ".Before the support pack upgrade it was working fine, I was able to generate the EWA report for all my servers.
Do any body face similar kind of problem?
Responses are highly appreciable
Thanks & Regards
Dusmanta

Hi,
Can you please debugg the same code from line 245 of include prog LDSVAS_GRAPHACI.
do me->category_count times.       " I think the value of category count is zero.
        lv_index = sy-index + 1.
        write lv_index to lv_fieldname+15 left-justified.
        assign (lv_fieldname) to <lv_value>.
Thanks
Subhankar

Field symbol has not been assigned when validate DEFAULT.LGF in BPC 75 SP10

Hello Experts,
We have upgraded our BPC 7.5 SP6 to SP10 recently and we are facking issues when validating DEFAULT.LGF in the system, here is the complete content of DEFAULT.LGF , can you help on this?
we have activated the business content using UJS_ACTIVATE_CONTENT and all dimensions are having MBR_SEQ attribute in the system.
thanks
Sanjeev
Edited by: sanjeev.s on Nov 17, 2011 4:02 PM

Hi Anton,
It did not work . Thanks.
Hi Srini,
As suggested by you i have commented out few lines to see where the code was failing exactly.
I do see we have maintained TERM_PER and START_PER in the property list of employee dimension with length 10 and 20 resp.
*SELECT(%OPEN%, ID, TIME, PERIODSTATUS=OPEN)
*SELECT(%ALLEMP%, ID, EMPLOYEE, CALC=N)
//*SELECT(%TERMS%, ID, EMPLOYEE, TERM_PER<> ) //commented by S K
//*SELECT(%NHIRES%, ID, EMPLOYEE, START_PER<> ) // commented by S K
*SELECT(%INTERN%, ID, HCDATASRC, EMP_TYPE=INTERN)
I am not well versed with script logic, do you think commenting these lines will have impact else where within the reports/input schedules since this is DEFAULT LOGIC for my headcount applicaiton.
Please help me on this. Thanks.
Regards,
sanjeev

How to revert back to not require rasterize for Photoshop?

I used to be able to color any Text, shape, or image by just selecting the particular layer and use pain bucket tool for example. Not sure what I clicked, but recently when I try to do the same; I always get the message
"This type Layer must be rasterized before proceeding. Its text will no longer be editable. Rasterize the type? "
I do not want to rasterize. Can I know how to revert back to the normal setup where I can do the coloring without the need for rasterize please.
It also seems to mess around with my selection.
For example - I have a circle shape in the middle with transparent background.
I used to be able to go Select>All followed by Select>Inverse and it will select the circle shape.
But now it selects the entire canvas when I select all but returns the following error when I Select>Inverse
"Warning No Pixels were selected".

Type:
Double-click on the T in the type layer.
In Type Options bar click on the color swatch which will open the Color Picker.
Choose a color and Commit.
The Type will remain vector and the color will have changed.
Circle:
If the circle was drawn with the Elliptical Marquee tool, Edit > Stroke'd with a color and then had the marching ants deselected:
Click on the transparent area with the Magic Wand tool. If you want to include in that selection the inside of the circle unclick Contiguous in the Magic Wand Options bar.
Then, inverse your selection to select the circular line.

How do I revert back to iOS 8.2? It's not my job to troubleshoot all the issues. I'm tired of finding problems.

How do I revert back to iOS 8.2? It's not my job to troubleshoot all the issues. I'm tired of finding problems.

creativelauren wrote:
I have the same problem trying to restore a backup from a previous IOS. Is there anyway of doing this and then upgrading to IOS 8.3 once you have done the restore?
You do not have the same problem. It is always possible to restore a backup made with a previous OS to the most recent OS. If you are having a problem restoring a backup from an older version the problem is not related to the fact that you have 8.3 on your device.

How to revert back of secondary indexes created?

Hi all,
I have craeted secondary indexes in development and they have been transported into quality and production. Some dumps are coming in the production because of these secondary indexes.
Please guide me how to revert back those secondary indexes from production(means to keep original with out that secondary indexes?)
Please give me solution.
Regards,
Lokesh

Hello,
The best way to do this is delete the indexes again in DEV and create a transport request.
Transport this request to QA and PRD and the index will be deleted.
Via SE14 you can also delete the index immed in PRD.
SE14 will only delete the index from the database (shortdumps will disappear then).
Afterwards you can still use SE11 to delete the index from the SAP repository as well.
Success.
Wim
Edited by: Wim Van den Wyngaert on Nov 20, 2009 1:08 PM

How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

Similar Messages

Maybe you are looking for