How to revert back to 10.6.8 from mavericks

How to revert back to 10.6.8 from mavericks, a lot of programs i need to use are unsupported by the new update. what can i do to revert my imac back to the previous OSX

Why not simply udate your apps, it will be much easier in the long run if you do. However if you want to revert back to 10.6.8, then simply use your SL discs to reformat your HD, then update to 10.6.8 and then use Migration Assistant to migrate your apps and other data from your TM or bootable backup clone to your HD.
Going forward it's much wiser to do you due diligence before updating. You have old apps that are probably PPC based, Apple supported those until Lion was released 2 years ago. The longer you wait to update those apps the more painful upgrading will be in the future.

Similar Messages

How to revert back to iMovie 9 after reinstalling Mavericks?

Good Day All,
I recently had to reinstall my OS (OSX Mavericks) for my MacBook Pro 13-inch Mid 2012 Model. Prior to this, I had iMovie 10 (yuck), AS WELL AS the old iMovie, which had remained behind in my applications folder (iMovie 9).
Before I reinstalled the OS, I made sure to copy the iMovie 9.0.9 application to my hard drive, and once a clean OS was installed, I made sure to drag iMovie 9.0.9 back to my applications folder and run it, however I am met with an error:
iMovie 9.0.9 has failed to start (not the exact words I cannot remember, as now whenever I launch it the icon pops up in my dock and than a split second later disappears)
Is there anyway I can get iMovie 9.0.9 back after a clean OS install?
I already downloaded this: http://support.apple.com/kb/DL1574 (the iMovie 9.0.9 update), however it fails to work, as the only iMovie I have on my machine is the horrible iMovie 10, and it required an older iMovie to update too.
Any help at all will be very appreciated.
Thanks
_celis_

try this code
TYPES: BEGIN OF ty,
sal TYPE i,
END OF ty.
data: a TYPE i,
      2a TYPE i,
      itab TYPE STANDARD TABLE OF ty WITH HEADER LINE,
      itab2 TYPE STANDARD TABLE OF ty WITH HEADER LINE.
itab-sal = 10.
APPEND itab.
itab-sal = 10.
APPEND itab.
itab-sal = 11.
APPEND itab.
itab-sal = 9.
APPEND itab.
itab-sal = 15.
APPEND itab.
itab-sal = 9.
APPEND itab.
loop at itab.
LOOP AT itab2 WHERE sal eq itab-sal.
ENDLOOP.
IF sy-subrc eq 0.
else.
APPEND itab to itab2.
ENDIF.
ENDLOOP.
LOOP AT itab2.
WRITE:/ itab2-sal.
ENDLOOP.

Revert back to osx mountain lion from mavericks?

Since updating to osx mavericks I have encountered numerous issues with my multi display set up to the extent that I have decided to go back to mountain lion
My question is how do I go about doing this as I have tried to go through the recovery but this only gives me the option to install mavericks
I have daily back ups so data loss is not a threat and I understand that erasing the drive is the most likely option
Any help will be appreciated I need this fixed ASAP as I need the set up for audio & video editing work!!!

Mistakericks.

How to revert back a SAP NOTE? Dump- Field symbol has not yet been assigned

Hi Experts,
We r getting dump(cause: Field symbol has not yet been assigned) in production for ABUMN tx, so, when debugged, it came to know that, the Field symbol is coming from REUSE_ALV_LIST_DISPLAY!!
So, for some reason the system message text is not getting output in ALV-->Dump!!
So, found a NOTE causing this problem!!
So, pls. let me know that, How to revert back this/any SAP NOTE? pls. in detail steps wise!!
thanq
Edited by: Srinivas on Jan 24, 2008 4:32 PM

Hi
In SNOTE tcode, select the Note that you implemented and click on 'RESET SAP Note Implementation'
shylesh

How to revert back previous working files in InDesign CS6?

I have suddenly replace wrong working files, how to revert back previous working files in InDesign CS 6?
OS Mac version: 10.10.3
InDesign CS6 version

This feature does not exist in InDesign. You're best hope is that you have a backup of the previous file. Moving forward, you might want to try a free product called Radish that allows you to save versions and revert back to previous versions when needed. Here's a blog post I wrote about the product Story Versioning in InCopy | InCopySecrets.

How to revert back the changes that have made to Infoset

Dear Experts,
Can any one help me with solution for the below issue?
I have activated(checked) some navigational attributes to the infocube "XYZ".This "XYZ" infocube is used in Infoset and as well as in multiprovider.Instead of activating navigational attributes in the infoset ,mistakenly i have removed the infocube and reassigned(reconnected with previous settings) in the infoset.Now i realized that the technical reference names in infoset(For ex:"ABC_F12,ABC_F13") got changed and giving the problem in Multiprovider.And there are n number of queries build based on the multiprovider.
While iam trying to activate the inactived Multiprovider iam getting an error message saying "inactive infoobjects ...(.ABC_F12,ABC_F13 are not available)....
Can any body help me how to revert back the changes for the Infoset that i have made or anyother process to sort out this issue.
Earlier solutions will be appreciated.
Thanks & Regards,
Prathish.

Hi,
If the changes have been saved, then there is no automatic way of reverting the changes. To get the Infoset in the reqd state, you will have to move an unchanged copy into the dev sys. The easiest way would be to transport a copy from the Prod sys. But first you have to check whether the transport path exists. With the help of Basis team, you can do this.
wish u luck.
Regards,
Rahul

How to revert back the changes of a task in a change request ?

Hello experts,
Our ABAP team made a script and they have locked a change request for it. Whatever changes made in that script are directly written in that change request through different tasks. Yesterday they opened the script and found that some of the data in that script is missing. The task entry shows that the data is still there which was missing, but I am not able to find out how to revert back those changes which are there in the task, so that the missing data can be brought back again in the script? Can someone please tell me how to solve this problem ?
Regards,
Sanket

Hi,
If modification assistant was on while making the deletion, then the comment should exist for data which was deleted.
Else use the version history to display and recover the lost version.
For eg SE38 -> Give report name -> Display. Utilities -> Versions -> Version Management
Should show all the TRs which changed the object and can compare/restore versions too.
Regards,
Srikishan

How to revert back of secondary indexes created?

Hi all,
I have craeted secondary indexes in development and they have been transported into quality and production. Some dumps are coming in the production because of these secondary indexes.
Please guide me how to revert back those secondary indexes from production(means to keep original with out that secondary indexes?)
Please give me solution.
Regards,
Lokesh

Hello,
The best way to do this is delete the indexes again in DEV and create a transport request.
Transport this request to QA and PRD and the index will be deleted.
Via SE14 you can also delete the index immed in PRD.
SE14 will only delete the index from the database (shortdumps will disappear then).
Afterwards you can still use SE11 to delete the index from the SAP repository as well.
Success.
Wim
Edited by: Wim Van den Wyngaert on Nov 20, 2009 1:08 PM

How to revert back to not require rasterize for Photoshop?

I used to be able to color any Text, shape, or image by just selecting the particular layer and use pain bucket tool for example. Not sure what I clicked, but recently when I try to do the same; I always get the message
"This type Layer must be rasterized before proceeding. Its text will no longer be editable. Rasterize the type? "
I do not want to rasterize. Can I know how to revert back to the normal setup where I can do the coloring without the need for rasterize please.
It also seems to mess around with my selection.
For example - I have a circle shape in the middle with transparent background.
I used to be able to go Select>All followed by Select>Inverse and it will select the circle shape.
But now it selects the entire canvas when I select all but returns the following error when I Select>Inverse
"Warning No Pixels were selected".

Type:
Double-click on the T in the type layer.
In Type Options bar click on the color swatch which will open the Color Picker.
Choose a color and Commit.
The Type will remain vector and the color will have changed.
Circle:
If the circle was drawn with the Elliptical Marquee tool, Edit > Stroke'd with a color and then had the marching ants deselected:
Click on the transparent area with the Magic Wand tool. If you want to include in that selection the inside of the circle unclick Contiguous in the Magic Wand Options bar.
Then, inverse your selection to select the circular line.

HT4904 Help! I hate this new install to Mountain Lion, how to revert back?

Any one has information on how to revert back to orignal software.

If it was Lion you didn't purchase it in 2010 in as much as Lion was released in summer of 2011. In any case Mountain Lion and Lion are so similar what's to "hate"?

I recently was sent an update for Safari and I hate it. How to revert back to how it was...

I recently was sent an update for Safari and I hate it. How to revert back to how it was...

I think you'll have to reinstall the OS from your Restore partition.

I have iphone 4 with iOS4.0, how to revert back version of facebook app?

I have iphone 4 with iOS4.0, how to revert back version of facebook app version because i am not able to use facebook 5.0 in my iphone?

That depends. If the phone was unlocked by the carrier, then it should be fine.
If your phone was unlocked by unauthorized means, then yes, it will be locked again.

HT1386 how i can back up only my photos from my iphone4s

I would like to know how i can back up only my photos from my iphone 4s to a computer with itunes where I don't have my library

Pics taken with iphone are imported as with any digital camera.
iOS: Importing personal photos and videos from iOS devices to your computer

How to revert back to the old code in NWDI ??

Hi,
I have done some changes to one of the DC and have released the activities and imported that in consolidation tab in transport studio of CMS.
Now my client do not want the changes we did, and he is asking me to revert back to the code that was prior to my changes.
I want to know how to do this in dev. and Qa system, as we have moved our changes to QA also.
What i have done is, i went to consolidation tab (in transport studio), i, went to "go history" and i have selected the activity that was imported to consolidation just prior to my activities, and than i clicked on import button. and than i went to assembly tab and i assembled that activity.
than i went to Qa portal, but still its showing my changes only, its not showing changes that was made prior to me.
What i m missing here?? and how to restore old code in dev and Qa system ??
please help
regards
vikas

HI,
you can get back the changes done in an activity as a local copy in the following way:
go to CBS web UI, click on compartments link'
under that search for your DC, and click on view all link.
you find all the activities under that DC. copy the integration time .
switch to DTR perspective,
righ tclick on the DC, choose Advanced sync, sync to date, give the integration time you got from CBS and click on ok.
Regards,
Satya.

How to revert back to the last version - I lost ALL most visited links and my Norton Safe master logon

Please, I am partially handicapped, and with the new version 4.0, I have lost ALL my Most Visited links and history, plus my Norton Safe master log on manager is also gone. (Typing in difficult for me)
Regretting this upgrade BIG time, I want to revert back to the last version but cannot find any instructions anywhere.
One blog entry I read said that the revert process (not explained how) made that person lose ALL their bookmarks.
There was NO warning that this 4.0 version would do any of this, and this is unacceptable, my favorite browser for a long time has me wondering now if I should go to Chrome!

Firefox 4.0 has a combined Reload, Stop, & Go button that appears at the right end of the location bar. Only one function is ever active at any one time, so combining them save UI space was a good idea. When a page is loading, it is a "Stop" button, when it finished loading, it turns into a "Reload" button, and when you start to type something into the Location bar it turns into a "Go" button.
To restore the Firefox 3 appearance you can use these steps:
* Open the "View > Toolbars > '''Customize'''" window or right-click a vacant area on a Toolbar, ''except fot the Bookmarks Toolbar''.
* Then drag'n'drop the Reload and Stop buttons to their previous position at the left side of the Location bar.
# Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
# Set the order to "Stop - Reload" to separate them and get two distinct buttons.

How to revert back to 10.6.8 from mavericks

Similar Messages

Maybe you are looking for