HOW TO REVERT THE FAULTY BI CONTENT INSTALLATION????
HI ALL,
I was trying to install bi content infoobject, 0costcenter, in that 1) for grouping i have selected "only necessary objects" 2) for collecting mode i have selected "collect automatically"
after clicking install i got some error, that 0compcode got overwritten.
my question is
how to get back the 0compcode to the earlier version which was a active verion(Currently it is in revised version). Due to this, some of the infoproviders got deactivated. is there any way to get back these
Infoproviders also.
pls Help.
There isn't any way to cleanly rollback the changes to the 0COMPCODE InfoObject. You'll have to manually adjust the 0COMPCODE InfoObject to the point of where it was prior to the BI Content install that you did. If that InfoObject has been promoted to a QA or production environment, you can view from that what changes are required.
As for the deactivated objects, you can activate all of them singularly or by using the SAP delivered activation programs listed:
RSDG_CUBE_ACTIVATE (InfoCube)
RSDG_IOBJ_ACTIVATE (InfoObject)
RSDG_MPRO_ACTIVATE (MultiProvider)
RSDG_ODSO_ACTIVATE (DSO)
RSQ_ISET_MASS_OPERATIONS (InfoSet - Requires client to be opened)
RSDS_DATASOURCE_ACTIVATE_ALL (DataSource)
RSDKDTPREPAIR (DTP - no selection screen)
You'll probably notice that there isn't anything for Transfromations. That's because there is no standard program to automate Transformations. Those have to be done individually.
Similar Messages
-
How to create the Table of Content (TOC) in WEB
Dear Sir
Please help me
How to create the Table of content (TOC) in Web Intelligence Report,
Thanks
Gnanasekarn.K
Edited by: Gnanasekaran Kandasamy on Nov 20, 2008 11:12 AMHi Gnanasekarn,
You can create TOC in webi using Open Document, You can create link on the TOC and you can connect that link to open new report .
With the help of open document you can open the specific portion of report.
So you can achive your requirement using URL reporting or Open Document.
Regards,
Chaitanya Deshpande -
How to customize the section's content in left bar?
How to customize the section's content in left bar. I hope to change create job's content, recent job's content etc. Or it is impossible?
regards
renHI Renliyuan,
you can use custom web applets (Rss feeds, Html Code or URL) to display different content in action bar.
Feel free to ask more
Regards
Nisman -
How to revert the changes done in an ABAP query
hi experts,
how to revert the changes done in an ABAP query.
I renamed a field in ABAP Query in development system, but the output list now has overlapping fields.
the renamed field is getting overlaped with other fields, also one more field has overlapped.
now the problem is how to get back to the previous version of the query so that the overlapping fields can be corrected.
renaming one field has led to the problem of overlapping fields in the output.
the sequence of the fields has also been affected.
Please helpHi,
Goto Utilities-> versions-> version management.
It will show you list of previous TR's. Just click on the version which you want to retrieve and click on Retrieve button on the top.
Your program will be retrieved to your previous version before change.
Hope this will help.
Regards,
Aravind. -
Hi,
Could some one please help me with the procedure or document on how to revert the maintainence image from 2.1(5) to 2.1(3) on NAM2 Module/
As I am trying to upgrade the 4.0 software version on the nam.
Thanks in advance.
Regards
Alex.I follwed this note only (Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite 11i [ID 290807.1]) to upgrade my Jre -1.6.0_23 version .Use the same steps to downgrade to 1.6.0_20 (i.e. download the correct plug-in, issue "txkSetPlugin.sh jversion" with the desired version, ..etc).
I given it to application team for testing they come back with some issues telling that some application and users unable to access so requesting to downgrade the JRE to 1.6.0_20 version.What issues? Have you considered upgrading to 1.6.0_24?
Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23
http://blogs.oracle.com/stevenChan/2010/12/mismanaged_session_cookie_issue_fixed_ebs.html
Is it possible to downgrade ? Try the above, or restore from a backup (if you have one) which is taken before upgrading to 1.6.0_23
Thanks,
Hussein -
How to revert the loded data in lsmw.
Hi guru's,
I have a problem regarding my data transfer. i have loaded my file in different server. i have to load the file in MP1, instead i have loaded in MQ1. (MP1 and MQ1 are my landscape servers). can anybody tell me how to revert the data which i have loaded in the server. it is very urgent. i am using LSMW.
regards,
maddy.Hi,
This is the link related to your question, but doesn't give complete solution.It has mass deletion of records..Check it out
http://e-mory.blogspot.com/2008_03_01_archive.html
Award points if useful.
Rewards,
Ravee.. -
How to migrate the SAP KM Content to MS SharePoint
Hi
How to migrate the SAP KM Content to MS SharePoint
Is there any links that can give me brief view on thiswe can integrate portal content to share point check this below link for[ Integrating SAP Portal Content into Microsoft SharePoint Portal Server|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6844e48d-0901-0010-b4b2-d5666689ca8b] and [Integrate Microsoft Sharepoint Services into Knowledge Management|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ba1508-27e7-2a10-2295-9dab5b78c614]. hope these helpful.
regards
Mahesh -
How to check the checkbox of Adobe Installer with the Aplescript??
Hi All,
am trying to Install Adobe Flash Player thru stand alone Installer, I want to check the check box and need to click on Install button,
Whem am trying to get the entire contents of window thru UIElementInspector, am unable to get the contents of checkbox and Install buttons..
I just tried myself with the below script to click the checkbox, but did not succeed, error saying unable to get the checkbox.. Pls suggest how to check..
tell application "System Events"
tell process "Adobe Flash Player Install Manager"
set frontmost to true
click the checkbox "I have read and agree to the terms of the Flash Player License Agreement" of window "Adobe Flash Player 11.5 Installer."
end tell
end tell
Pls check the below link to view the image of the Adobe Flash Player Installer.
https://docs.google.com/document/d/1yzyBTrvi94QxjlEAlcbudOBpXiTGPEI2LA3D1iEo8Gw/ editI'm working on a similar script, but when I execute the script, I run into this error:
error "System Events got an error: Can’t make {563, 234} into type list." number -1700 from {563, 234} to list
Any ideas? Here's the background: I'm trying to click the search box on this page: http://www.alexa.com/siteinfo/payeasenet.com
Here's my UI Inspector results of said element:
<AXGroup>
<AXScrollArea: “”>
<AXWebArea: “”>
<AXGroup: “”>
<AXGroup: “”>
<AXTextField: “Enter a search query”>
Attributes:
AXRole: “AXTextField”
AXSubrole: “AXSearchField”
AXRoleDescription: “search text field”
AXChildren: “<array of size 0>”
AXHelp: “”
AXParent: “<AXGroup: “”>”
AXPosition: “x=550 y=212”
AXSize: “w=214 h=30”
AXTitle: “Enter a search query”
AXDescription: “”
AXValue (W): “”
AXFocused (W): “1”
AXEnabled: “1”
AXWindow: “<AXWindow: “Payeasenet.com Site Info”>”
AXSelectedTextMarkerRange (W): “(null)”
AXStartTextMarker: “<AXTextMarker 0x60800024af80 [0x7fff758b4eb0]>{length = 24, bytes = 0xbd040000000000006024c514010000000000000001000000}”
AXEndTextMarker: “<AXTextMarker 0x600000248a30 [0x7fff758b4eb0]>{length = 24, bytes = 0xbf0400000000000040420c17010000000100000001000000}”
AXVisited: “0”
AXLinkedUIElements: “(null)”
AXSelected: “0”
AXBlockQuoteLevel: “0”
AXTopLevelUIElement: “<AXWindow: “Payeasenet.com Site Info”>”
AXNumberOfCharacters: “0”
AXSelectedText (W): “”
AXSelectedTextRange (W): “pos=0 len=0”
AXVisibleCharacterRange (W): “pos=0 len=0”
AXInsertionPointLineNumber: “0”
AXTitleUIElement: “(null)”
AXAccessKey: “(null)”
AXRequired: “0”
AXInvalid: “false”
AXPlaceholderValue: “”
AXARIABusy: “0”
Actions:
AXPress - press
AXShowMenu - show menu
AXScrollToVisible - AXScrollToVisible -
How to use the second display for installation OS in my vertical lines iMac
My 17" iMac display is full of vertical lines, it is unuseable. Does anyone know how to use the second display for Mac OS X or disable the first display for installation Mac OS x ?
Go to: *System Preferences > Displays* and select the Arrangement tab, then relocate your Menu bar by dragging it to the other display.
Unfortunately there is no Hardware or Software switch to turn off the iMac's Internal Display. -
How to Print the whole view content from a button on the View Layout
Dear All,
Good Morning All
I am New to WebDynPro.Solution needed Urgently
How to take print whole view content(lay out) in
webdynpro application.i.e whatever it may be tablecontent or label or inputfield .
Could you send the coded part briefly step by step from the beginning itself i.e
i put the button in the view lay out below the printed parts(label or inputfield) name like show preview .
Now my Question is what should i write in show preview function to take the print in label fields in the webdynpro view lay out
B'cos i am new to webdynpro.Help me
Thx in advance
Regards
DhinakarWeb Dynpro by default does not provide the option of printing the view content.
However still you have a round about way of doing it. Create the an html page similar to the Web Dynpro page. Store the code into a String variable.
String html="<html> ....<scripts>window.print()</scripts></html>";
bytes[] source=html.getBytes();
try{
byte[] b=new byte[1];
IWDCachedWebResource res=WDWebResource.getWebResource(b,WDWebResourceType.HTML);
String url=res.getURL();
}catch (WDURLException e) {
// TODO: handle exception
Now open the url in a new window and that would print the content of the html page.
Regards,
Noufal -
How to Print the whole view content from a button on the view
Dear All,
Good Morning All
I am New to WebDynPro.Solution needed Urgently
How to take print whole view content(lay out) in
webdynpro application.i.e whatever it may be tablecontent or label or inputfield .
Could you send the coded part briefly step by step from the beginning itself i.e
i put the button in the view lay out below the printed parts(label or inputfield) name like show preview .
Now my Question is what should i write in show preview function to take the print in label fields in the webdynpro view lay out
B'cos i am new to webdynpro.Help me
Thx in advance
Regards
DhinakarWeb Dynpro by default does not provide the option of printing the view content.
However still you have a round about way of doing it. Create the an html page similar to the Web Dynpro page. Store the code into a String variable.
String html="<html> ....<scripts>window.print()</scripts></html>";
bytes[] source=html.getBytes();
try{
byte[] b=new byte[1];
IWDCachedWebResource res=WDWebResource.getWebResource(b,WDWebResourceType.HTML);
String url=res.getURL();
}catch (WDURLException e) {
// TODO: handle exception
Now open the url in a new window and that would print the content of the html page.
Regards,
Noufal -
How to create the Table of Contents in Preview for a pdf file?
Does anyone know how to use the Preview to create a new table of contents or add a new link to the existing table of contents?
ThanksPreview cannot do this - it is not a PDF editing utility. If you have the original document in an editable format (eg a Pages, or Word document) then you can edit it, print it, and from the print dialogue, save as a PDF. Otherwise you'll need the full Adobe product or similar to acheive what you want.
-
How to clear the table control content
Hi All,
I am doing BDC for cost estimate change. In this the transaction KKPB contains table control. So when ever i process with particular cost estimate, i need to fill the table control with the values. Here when i am doing the BDC for change, i need to clear all the contents of the table control then i need to fill with new entries.
So my problems is how to clear the table control entriee?? please help me in this??
Many Thanks,
Raghu.Hi this might help u.
Check the below link.
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
THis is example to upload the Bank details of the Vendor which has the TC.
REPORT zprataptable2
NO STANDARD PAGE HEADING LINE-SIZE 255.
DATA : BEGIN OF itab OCCURS 0,
i1 TYPE i,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
anred LIKE lfa1-anred,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
END OF itab.
DATA : BEGIN OF jtab OCCURS 0,
j1 TYPE i,
banks LIKE lfbk-banks,
bankl LIKE lfbk-bankl,
bankn LIKE lfbk-bankn,
END OF jtab.
DATA : cnt(4) TYPE n.
DATA : fdt(20) TYPE c.
DATA : c TYPE i.
INCLUDE bdcrecx1.
START-OF-SELECTION.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\first1.txt'
filetype = 'DAT'
TABLES
data_tab = itab.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = 'C:\second.txt'
filetype = 'DAT'
TABLES
data_tab = jtab.
LOOP AT itab.
PERFORM bdc_dynpro USING 'SAPMF02K' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-KTOKK'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
itab-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
itab-bukrs.
PERFORM bdc_field USING 'RF02K-EKORG'
itab-ekorg.
PERFORM bdc_field USING 'RF02K-KTOKK'
itab-ktokk.
PERFORM bdc_dynpro USING 'SAPMF02K' '0110'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-LAND1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFA1-ANRED'
itab-anred.
PERFORM bdc_field USING 'LFA1-NAME1'
itab-name1.
PERFORM bdc_field USING 'LFA1-SORTL'
itab-sortl.
PERFORM bdc_field USING 'LFA1-LAND1'
itab-land1.
PERFORM bdc_dynpro USING 'SAPMF02K' '0120'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFA1-KUNNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
cnt = 0.
LOOP AT jtab WHERE j1 = itab-i1.
cnt = cnt + 1.
CONCATENATE 'LFBK-BANKS(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-banks.
CONCATENATE 'LFBK-BANKL(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankl.
CONCATENATE 'LFBK-BANKN(' cnt ')' INTO fdt.
PERFORM bdc_field USING fdt jtab-bankn.
IF cnt = 5.
cnt = 0.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKN(02)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
ENDIF.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMF02K' '0130'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBK-BANKS(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0210'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-FDGRV'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFB1-AKONT'
itab-akont.
PERFORM bdc_field USING 'LFB1-FDGRV'
itab-fdgrv.
PERFORM bdc_dynpro USING 'SAPMF02K' '0215'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-ZTERM'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0220'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB5-MAHNA'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0310'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFM1-WAERS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'LFM1-WAERS'
itab-waers.
PERFORM bdc_dynpro USING 'SAPMF02K' '0320'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-LIFNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0300'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=YES'.
PERFORM bdc_transaction USING 'XK01'.
ENDLOOP.
PERFORM close_group.
Header file:
1 63190 0001 0001 0001 mr bal188 b in 31000 a1 inr
2 63191 0001 0001 0001 mr bal189 b in 31000 a1 inr
TC file:
1 in sb 11000
1 in sb 12000
1 in sb 13000
1 in sb 14000
1 in sb 15000
1 in sb 16000
1 in sb 17000
1 in sb 18000
1 in sb 19000
1 in sb 20000
1 in sb 21000
1 in sb 22000
2 in sb 21000
2 in sb 22000
REPORT zmm_pr_upload_mat
NO STANDARD PAGE HEADING
LINE-SIZE 255.
Standard Include for Selection Screen
INCLUDE bdcrecx1.
Internal Table for Upload Data
DATA: BEGIN OF i_pr OCCURS 0,
Header Screen
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
lpein(001), " Category of Del Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
Item Details
matnr(018), " Material No
menge(017), " Quantity
badat(010),
frgdt(010),
preis(014), " Valuation Price
waers(005), " Currency
peinh(005),
wepos(001),
repos(001),
sakto(010), " GL Account
kostl(010), " Cost Center
bnfpo(005),
END OF i_pr.
Internal Table for header Data
DATA: BEGIN OF it_header OCCURS 0,
sno(3), " SNo
bsart(004), " PR Type
epstp(001), " Item Category
knttp(001), " Account Assignment
eeind(010), " Delivery Date
werks(004), " Plant
lgort(004), " Storage Location
ekgrp(003), " Purchasing Group
matkl(009), " Material Group
bednr(010), " Tracking No
afnam(012), " Requisitioner
END OF it_header.
Internal Table for Item Data
DATA: BEGIN OF it_item OCCURS 0,
sno(3), " SNo
matnr(018), " Material No
menge(017), " Quantity
preis(014), " Valuation Price
sakto(010), " GL Account
kostl(010), " Cost Center
END OF it_item.
Data Variables & Constants
CONSTANTS : c_x VALUE 'X'. " Flag
DATA : v_l(2), " Counter
v_rowno(5), " Row No
v_2(2), " Counter
v_rows LIKE sy-srows, " Rows in TC
v_field(45). " String
Parameters
PARAMETERS: p_file LIKE ibipparms-path. " Filename
At selection-screen on Value Request for file Name
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
Get the F4 Values for the File
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
IMPORTING
file_name = p_file.
Start of Selection
START-OF-SELECTION.
Open the BDC Session
PERFORM open_group.
Upload the File into internal Table
CALL FUNCTION 'UPLOAD'
EXPORTING
filename = p_file
filetype = 'DAT'
TABLES
data_tab = i_pr
EXCEPTIONS
conversion_error = 1
invalid_table_width = 2
invalid_type = 3
no_batch = 4
unknown_error = 5
gui_refuse_filetransfer = 6
OTHERS = 7.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
SORT i_pr BY sno.
LOOP AT i_pr.
MOVE-CORRESPONDING i_pr TO it_item.
APPEND it_item.
CLEAR it_item.
AT END OF sno.
READ TABLE i_pr INDEX sy-tabix.
MOVE-CORRESPONDING i_pr TO it_header.
APPEND it_header.
CLEAR it_header.
ENDAT.
ENDLOOP.
SORT it_header BY sno.
SORT it_item BY sno.
v_rows = sy-srows - 6.
Upload the Data from Internal Table
LOOP AT it_header.
Header Data
PERFORM bdc_dynpro USING 'SAPMM06B' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-BEDNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-BSART'
it_header-bsart.
PERFORM bdc_field USING 'RM06B-EPSTP'
it_header-epstp.
PERFORM bdc_field USING 'EBAN-KNTTP'
it_header-knttp.
PERFORM bdc_field USING 'RM06B-EEIND'
it_header-eeind.
PERFORM bdc_field USING 'RM06B-LPEIN'
it_header-lpein.
PERFORM bdc_field USING 'EBAN-WERKS'
it_header-werks.
PERFORM bdc_field USING 'EBAN-LGORT'
it_header-lgort.
PERFORM bdc_field USING 'EBAN-EKGRP'
it_header-ekgrp.
PERFORM bdc_field USING 'EBAN-MATKL'
it_header-matkl.
PERFORM bdc_field USING 'EBAN-BEDNR'
it_header-bednr.
PERFORM bdc_field USING 'EBAN-AFNAM'
it_header-afnam.
Item Details
v_l = 0.
To add no. of rows
v_2 = 0 .
As the screen is showing 13 rows defaulted to 130
v_rowno = 130 .
LOOP AT it_item WHERE sno = it_header-sno.
v_l = v_l + 1.
IF v_l = 14 .
IF v_2 = 12 .
v_2 = 12 .
v_l = 2 .
From second time onwards it is displaying 12 rows only
v_rowno = v_rowno + 120 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ELSE.
V_2 initialized to 12 for second screen purpose
v_2 = 12 .
v_l = 2 .
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'RM06B-BNFPO'
v_rowno .
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
ENDIF.
ENDIF.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
CLEAR v_field.
CONCATENATE 'EBAN-MATNR(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-matnr.
CLEAR v_field.
CONCATENATE 'EBAN-MENGE(' v_l ')' INTO v_field.
PERFORM bdc_field USING v_field it_item-menge.
PERFORM bdc_dynpro USING 'SAPMM06B' '0102'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBAN-PREIS'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'EBAN-PREIS'
it_item-preis.
PERFORM bdc_dynpro USING 'SAPMM06B' '0505'.
PERFORM bdc_field USING 'BDC_CURSOR'
'EBKN-SAKTO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'EBKN-SAKTO'
it_item-sakto.
Cost Center
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-KOSTL'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-KOSTL'
it_item-kostl.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
ENDLOOP.
PERFORM bdc_dynpro USING 'SAPMM06B' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RM06B-BNFPO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
Call The Transaction
PERFORM bdc_transaction USING 'ME51'.
ENDLOOP.
Close the BDC Session
PERFORM close_group.
with regards,
Hema Sundara. -
How to set the returned url contents
I have a pageflow which talks to a remote servlet and get back the results and now i need to display the contents in <iframe>, Let me know how to pass the values back to the JSP
Hello Chao-Yi Wu,
I don't have a real solution for you - just a few comments:
1. At
Try
val = oDataTable.GetValue(0, 0)
Catch ex As Exception
End Try
I would add
Try
if oDataTable Is Nothing Then Exit Sub ' If the User cancels the CFL
val = oDataTable.GetValue(0, 0)
Catch ex As Exception
End Try
2. At
If pVal.ColUID = "col_0" Then
I would make the branch by the pVal.ChooseFromListUID instead of the ColUID
and the 2nd not with "Else" but with "Else If ....."
3. It may work with EditText.String/Value of a cell but I never do that because of performance-reasons.
I always do it the same way as you in principle - I don't really know what the problem is.
4. Maybe some unique indexes on your table (although this should give an error at the update and not at CFL when "the unique-law is broken"...)?
Sorry - that's all for the moment.
Cheers,
Roland -
How to encrypt the iPod's content when syncing with iTunes?
I can't find the way to encrypt the iPod's content. For example, how to make a password that people have to enter when they connect my iPod with iTunes before they can see all the stuff that's in my iPod appeared in iTunes?
Passcodes and Data Protection
You can set a passcode that you must enter each time you turn on or wake up
iPod touch.
Set a passcode: Choose Settings > General > Passcode Lock and enter a 4-digit
passcode, then enter the passcode again to verify it. iPod touch then requires you to
enter the passcode to unlock it or to display the passcode lock settings.
Setting a passcode turns on data protection (iPod touch 3rd generation). Data
protection uses your passcode as the key for encrypting mail messages and their
attachments stored on iPod touch. (Data protection may also be used by some
applications available in the App Store.) A notice at the bottom of the Passcode Lock
screen indicates when data protection is enabled.
To increase the security of iPod touch, turn off Simple Passcode and use a longer
passcode with a combination of numbers, letters, punctuation, and special characters.
See “Passcode Lock” on page 139.
Important: On iPod touch 3rd generation, you must also restore iOS software to
enable data protection.
http://manuals.info.apple.com/enUS/iPod_touch_iOS4_UserGuide.pdf
Maybe you are looking for
-
Cut and Paste between Events not working
Using iPhoto11, I can drag and drop pictures between events, no problem...but Cut and Paste does not work. I select a photo and cut in event A, go to event B, I right click and get a PAST button, It even clicks but nothing happen, the Cut image never
-
How do i get rid of a virus that gives me popups
i downloaded something to watch a video for free (not smart, i know lol) and i get a million popups of things like mackeeper. My computer buggs out all the time and asks me for passwords and to download more things. Help me please!!
-
We are using OO4O in an application made in Visual Basic 6.0. This application enqueues and dequeues objects from an AQ queue. The problem is that sometimes, when we enqueue an object we are having the following message: "Eneuque error in AQ object,
-
Hi I bought one program (Sketch club) and they withdraw from my account 3.99 $ that's okey in this issue. But, next day they withdraw 12 $ from itunes store... why is that? could you please help me with that
-
High cpu usage (mavericks)
Hey, On Mavericks, I've been noticing that I'm getting a high (unacceptable) CPU% usage in Photoshop. When not even using the program and having it ran in the background, about 8-10% is taken up. This seems normal. When I do some simple strokes my CP