How to roll back changes made by other user in nwdi?

hi all
my doubt is.
if there are errors in the WD NWDI project (cause developer before me had deleted/ added some of the code which is causing those errors).
how to roll back the code changes which were made by other user.
i think through sync option but when we sync to a earlier date we cant check out the code to make changes.
help me.

thanks rohit.
but if there are changes in the context, i mean if one more attribute is created and it is been used a UI element.
then the above process works.
My doubt is.
src folder(configuration,packages,mimes)
Will these file contain all the code including the context attributes and the mapping informatin and every thing else.
(except Libs)???????
can you plz tell me where the context attributes and mapping informantion and source code and model information are stored (in which folder).
thanks in advance

Similar Messages

How to trace the changes made by other user in portal

Hi All,
Actually i have a requirement like, some body has done some changes in Development server how to trace those chnages in portals or Visual Admin (who is the user and what are all the objects that got changed) .
Actually our development system , Quality and Production systems are working fine till yesterday but when we logon to the dev, qua, prd systems today there are some changes and some of the things are not working client was asking us whether we have done some canges if not who has done the changes.
Is there any place where all these changes can be recorded (likes who is the user and changes ....) or traced like log files or any thing else
Can any one help me out in this regard.
Thanks & Regards,
Ramesh.

Hi ,
As you told some changes identified. so navigate to corresponnding portal obejcts and find modified and last changed by similar properties in the property editor object.
portal activity reports gives how many users visted specific pcd object but not who visited. You can use pcd filter to compare properties.
Regards,
Koti Reddy

Very very urgent - roll back changes made to standard Basis SWC

Hello all,
I have a complex scenario where enterprise service enhancement was made.
Basis object is present below imported objects and it will have many standard sap objects
it gave a message "Object is defined in a subordinate software component version. Do you want to add the object to the software component and modify it?"
I made modifiction to the MESSAGE INTERFACE of Basis object and unknowingly I activated it.
Ever since that I see change symbol and M symbol to the standard object. I want to get rid off and place the original object back in place
How do I roll back to the original?
if not how do i put the actual basis object in that message interface of basis object?
plz tell me asap coz I want to put it back as it was earlier.
thanks
nikhil..

Hello Nikhil,
Re: change names of PDT, SWC, NS, without disturbing existing scenarios
SWC removed from SLD by mistake
GUID of SWC is changed
May these posts will help you...

Tracking records change made by another user or session

How does oracle forms track records change made by other user or session?

I think the question is, how does Forms know to issue the error "FRM-40654: Record changed by another user. Re-query to see change".
I don't know exactly how Forms knows this. But in the past I have found that if a column has changed on the record, which you are not querying in this forms block, then you don't get the error. So Forms is perhaps comparing all the database values for the queried record, against the values that Forms has queried?
When you attempt to lock the record from Forms, you'll see that Forms issues a statement
SELECT <all the db columns in the block>
FROM <wherever>
FOR UPDATE OF <all the db columns in the block which are not query only>
Even so, in the database, that statement doesn't know what the values are that the Form has already queried. So Forms must be doing something else.
Hope this helps, it's a bit of a black box area I guess.

How do you save changes made in iPhoto, and export the changed file. It keeps reverting back to the original.

How do you save changes made in iPhote, and export the changed picture file? When I select export, current format, it reverts to the original, wiping out all my work.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

How to "roll back" SAP APO PPDS planning batch run from infeasible batch mid-point to before start of planning batch run?

Hi Experts,
We are investigating if any SAP customer that implemented SAP APO PPDS has ever attempted to establish a "roll back" of the SAP APO PPDS created supply plan to a defined point before the start of the SAP APO PPDS planning batch run?
We have a situation where - in the middle of the planning batch run - randomly or intermittent the batch run hangs or runs a step for multiple hours that normally, at most days, takes only a few minutes to run. In a situation like this, the supply plan is not in a state where customer sales orders can be promised (using GATP CTP) or planned orders can be converted to production orders and published to SAP ECC, etc since the plan may be capacity infeasible or simply partial or incomplete.   To not hold the business operations hostage to wait resuming operations (promise customer sales orders, convert and release and execute orders to transfer, deliver, produce, or purchase) for hours or days, we need to find a way back to the original plan right before the nightly PPDS batch planning job started.
We already close all the queues from ECC to APO, thus, no CIF traffic from ECC to APO. We also shut down the customer sales order feed into ECC as normal process for duration of the APO PPDS batch planning run. Thus, functionally, we are theoretically in a situation to simply go back to a PPDS and active planning version save prior to the run. Yet, many more technical and BASIS-related questions remain on how to roll back to a state where the plan was not compromised.
This inquiry is to learn if any other SAP customer has ever established a process to roll back SAP APO PPDS to a previous point in time supply plan to resume operations? Whatever the reasons are, be it after a failed batch run, or any time during the normal interactive plan day.
Additional information about our design and plan:
1. We have a two year horizon supply plan in PPDS
2. We only publish to ECC 14 days worth of planned orders, stock transfer requirements, and purchase requirements
3. We convert planned orders to production orders and release production orders in ECC 2 days before first operation starts
4. We convert PR's to PO's and STR's to STO's in ECC 2 days before execution (ship or submit to vendor)
Any indication where a SAP customer has developed and uses a process to roll back an SAP APO PPDS- planned supply plan to an earlier point in time or version would be helpful to know.
Regards,
Manimaran M.

Hi Manimaran,
Saving in Simulation means in DS board when you click on save it provides you option to save sim version or adopt to active version. If you copy to inactive version you cannot copy back trasaction data specially PPDs orders back to active version again while if you save in simulation you can adope it to active version at any point of time. YOu can adopt simulation version changes to active version using T-code /SAPAPO/CDPSS0
Copying to active version means you copy data from version 000 to some other active version while here results are kept simulation,

HT4759 How do you get changes made to your documents on a Windows 7 computer show up in your documents on your iPhone?

How can I get changes made in documents on my Windows 7 computer to show up in the documents on my iPhone 5? These documents show up in ICloud without showing the changes.

You have to be accepted into the Apple Beta program before any of that works.

Swing .............how to undo the changes made by user

Hi,
i have created a form in swing asking for the related information from user whose value i m taking in jformetted textfield.
now i have placed two buttons there.
one is Apply and second is Cancel.
when user pressed Apply button all the changes made by the user must be set where as if user clicks cancel button all the changes made by user should be undo to previously set value.
can anybody help me how this can be done and what code should i write in action performed method
thanks in advance
plz reply

thanx.
one more thing
In my application,there is one Button called Option when u clicked on it.It opens up one internal frame where user is asked to asked to fill some parameters.
1) Now how can i restrict user to create one more internal frame unless first one is closed.
2) suppose i clicked option button and it opens up internal frame where i can set the parameters and closed it.If i again click on option then i want the parameter to have wht i just set.
3) and how can pass those parameters value to my main frame from where i m calling internal frame
Plz reply
Edited by: neel007 on Mar 11, 2009 8:02 PM

How to see the changes made for iPad in iTunes on my iPad?

How to see the changes made for iPad in iTunes on my iPad? I've been transferring some pdf-files and changed the name on them in iTunes under the index books for my iPad device, but the changes do not show in iBooks-PDF. What to do?

Yes I tried syncing a lot of times, but the changes still wouldn't show, so I did as you said by beginning from the start by adding the PDF's once again.
Thanks for your help, it works now :-)

How to roll back when procedure fails

Hi All,
In my process using procedures i am droping the temp tables and creating temp tables ,if any procedures fails how should roll back all the process
Procedure1(droping tables)----->procedure2(creating table1)--------->procedure3(creating table2)------->procedure4(Validaating accounts in table2 and creating seperate table)
Any suggestion please
Thanks in Advance

Let's say in your package you have your 4 procedures (Proc1, Proc2, Proc3, Proc4).
Also create 3 additional procedures:
RollBack1 -> Does the opposite to Proc1 (i.e. if Proc1 drops a table, then Rollback1 will create it)
RollBack2 -> Does the opposite to Proc2
RollBack3 -> Does the opposite to Proc3
Your logic will be:
If Proc1 is successful, then execute Proc2.
If Proc1 is unsuccessful, then end.
If Proc2 is successful, then execute Proc3.
If Proc2 is unsuccessful, then use an on failure path (red line) to execute RollBack1.
If Proc3 is successful, then execute Proc4.
If Proc3 is unsuccessful, then use an on failure path (red line) to execute RollBack2, followed by RollBack1.
If Proc4 is successful, then end.
If Proc4 is unsuccessful, then use an on failure path (red line) to execute RollBack3, followed by RollBack2, followed by RollBack1.
It mightn't be necessary to undo everything - but you'll know your own business needs to make a decision on that.

How can we log changes made in RSA1 in BW/BI

How can we log changes made in RSA1 in BW/BI ?
Please advise.
Regards,
Archana

Hi Arun,
Thanks for your reply.
Basically I wanted to get the log for a particular user when executing RSA1 tcode (the user has change access).
Do we have any table which records the RSA1 changes.
Thanks.
Regards,
Archana

How to roll back to the good last vershion where plugins work

how to roll back to the good last vershion that all plugins work ok
as 4.0 freezes with some sites.

You can install previous version of Firefox from [http://www.mozilla.com/en-US/firefox/all-older.html here].
<BR>For installation instructions, see this article: [[Installing a previous version of Firefox]].

Downloaded Yosemite but installation not finishing. Now Mac is frozen. Any idea how to roll back to earlier version?

Downloaded Yosemite but installation not finishing. Now Mac is frozen. Any idea how to roll back to earlier version?

i have the same issue, really not happy, if i get an answer i will share with you.mark

How to share administrator iPhoto library with other users on same iMac?

How to share administrator iPhoto library with other users on same iMac?

This is the part I'm referring to:
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
The library stays in the Pictures folder for this.

How to Hide Track changes according to Specific user?

Hello All,
     We are developing plugin and we have to hide the changes according to specific user. We are setting the track change preferences using the methods provided by ITrackChangeAppSettings interface.
     But as this interface is aggregated on kWorkspaceBoss it is applying the changes for all users.
     Will anyone please suggest how can I apply changes according to particular users? any help is appretiated.
Thanks & Regards,
Praveen

Hello All,
           For hiding the tracked changes according to particular user,i have accept the changes according to specific user.But i have undo the changes it means before saving i have to undo the accepted changes.I am using VOS_RedlineObject::UndoSimpleChange() method but it is not working.
            Can anyone tell me other way for doing that?
Thanks & Regards,
Megha

How to roll back changes made by other user in nwdi?

Similar Messages

Maybe you are looking for