How to run a VI at CFP for a stand alone device ?

Dear friends,
I am new to Labview, using CFP 2100. What are the procedures to run/feed a VI into CFP such that it can operate a stand alone device (No PC connected).
Does it need to create an executable file (.exe) or we can directly copy and paste a vi into CFP? if so then where should it be pasted.
Help me even though it might be a very basic query.
thank you.
Alok
-AL☼K

Alok,
For a complete standalone app, you will create an Executable for the cFP.  You could either create this on your Host (Desktop PC) LabVIEW and FTP it to the cFP (using any FTP client utility).  Or, if you are targeted to the cFP and create the EXE, it will automatically download it to /NI-RT/STARTUP  folder.  Which is where you want it if you want the EXE to run on cFP's startup. 
I am pretty sure all this info' is buried somewhere in the documentation (not sure where.. since I never had to read it    )
-Khalid
Message Edited by Khalid on 04-18-2006 10:06 AM

Similar Messages

  • How can I read the complex data for the stand-alone offline time-frequency analyzer, which only accept real data, that is one-column or one row data ?

    I have real complex data (i,q data) for the ISAR imaging. I don't have any knowledge of Labview programming. I bought this signal processing toolset to use only stand-alone time-frequency analyzer.

    In the LabVIEW functions palette on the block diagram, if you go to Numeric>>Complex you have to VI's that splits a complex number into rectangular or polar components. Click on the help file for those VI's to see the kind of datatypes you can wire to them.
    Cyril Bouton
    Active LabVIEW Developper

  • How to run the Transaction Code - BIC for Bank keys uploading

    Hi
    How to run the Transaction Code - BIC for Bank keys uploading.
    please give me suggestion.
    Thanks
    Indu

    Go to BIC transaction screen
    Fill the selection screen parameters as below
    1. Update Run (Test Run: Check Off: Real Run:Check On)
    2. Set Deletion Flag (Check On)
    3. Maximum no. of records: 999999
    4. Detail List (Check On)
    5. Display variant: 1SAP
    6. Presentation server (Select Radio Button)
    7. Application server (Deselcet Radio button)
    8. File name and Path: Select relavant file which is to be upload
    9. Bank country: If needed (Give respective country name)
    10. Select execute button or F8
    NOTE: Make sure that before executing run execute TEST RUN by deselecting Update Run check box
    Hope this will meet your requirement
    Thanks.

  • How do I copy albums in iPhoto to a stand alone drive for backups

    How do I copy albums in iphoto to a stand alone hard drive for backup?

    This User Tip
    https://discussions.apple.com/docs/DOC-4921
    has details of the options in the Export dialogue.

  • Install "use typical installation options for a stand-alone primary site" All SQL Prerequisites Failed. Checks SQL before SQL is even installed?

    So I select the install option to "Use typical installation options for a stand-alone primary site" which says it includes installation of SQL 2012 SP1 on the local server.
    But then during the prerequisite checks it fails every SQL check.
    Is it just me or a giant catch 22? Am I missing something here? How is this over looked if it is what it looks like? Why even have this simple install option if it can't work?

    Take a look at my R2 install guide. This is for a stand alone primary. As Torsten states you pretty much need SQL installed and configured correctly prior to running the ConfigMgr install - along with  a few other pre-reqs.
    https://sccmentor.wordpress.com/2014/01/08/sccm-2012-r2-step-by-step-installation-guide/
    Cheers
    Paul | sccmentor.wordpress.com

  • A recommendation for a stand alone keyboard

    HI all please can I have a recommendation for a stand alone midi keyboard for my 9 year old to plug into G.B.
    THANKS ALOT
    Happy holidays
    Dale

    here's a link posted last eve.
    http://discussions.apple.com/thread.jspa?threadID=1800994&tstart=0

  • How do I get separate iCloud accounts for each family members device and still share iTunes?

    how do I get separate iCloud's for each family members iPhone, iPod and iPad and still share iTunes?

    Have everyone share the same iTunes store ID, but use separate IDs for iCloud.  The ID you use for iCloud does not have to be the same as the ID you use for the iTunes & App store.

  • How to set Gain on analog Chs for MIO-16 E device?

    DAQmxErrChk(pDAQmxSetChanAttribute(m_taskHandle2,"Dev1/ai0:1",DAQmx_AI_Gain,2));
    The DAQmx_AI_Gain property is not supported  for my MIO- E device, how will I be able to set the Gain?
    Thanks

    The gain is automatically set based on the maximum and minimum values that are specified when you create a channel. 
    -Christina

  • How to align prompts for a stand alone report

    I have an OBIEE analysis with prompts. This is a stand alone report and not a report on the dashboard.
    This report has various different prompts each with a different text. Due to which they dont align .
    For example
    (dash is a prompt box)
    Product Name= ___________________
    Product Description contains any ________________
    Batch Number= __________________
    Destination City contains any _________________
    But what I want is to have spaces between the prompt and prompt box so that it align correctly.
    Can this be done just from  the prompts tab in the report?
    Thanks

    hi
    why dont u use Prompt Display  to "Place label on side of prompt" ?? . it will align automatically.
    Regards
    Sher

  • How to build Vis in NI_AALbase​.lvlib to my Stand-alon​e applicatio​n?

    Hi, everybody.
    I met some problems while building the subVis of NI_AALbase.lvlib and NI_AALPro.lvlib into my stand-alone application.
    I use Labview 8.2 professional version and Windows xp OS.
    While I build the system contained example "Peak detection and display.vi" into stand-alone application, it succeeded in the local computer,and the exe program run correctly.
    Then I move the generated application files to another computer, where only the run-time engine 8.2  was installed.  However, some errors
    appeared during the running. The error message is "unable to load the front panel, error in loading 'NI_AALPro.lvlibeak detector.vi'  "
    It seems the "Peak detector" subvi in NI_AALPro.lvlib can not be found. Similar problems happened with the subvis in NI_AALbase.lvlib.
    I use the default configuration for Application Builder.  I donot know how to configure the Application Builder.
    Could you help me  to solve the problems?
    Thank you.
    Stephen

    An example of a non-vi support file might be an image that you are importing into your application. LabVIEW can obtain data from external files and perform LabVIEW functions on it.
    Thus, if you created an application that imported a file that is not a vi, you would include this in your support files.
    You can find out more about File I/O in the LabVIEW Help>>Fundamentals section.
    I hope this helps clarify things. Let me know if you have any more questions regarding this issue.
    Cheers,
    Emilie K. | Applications Engineer | National Instruments

  • How to Insert fields directly from sharepoint instead of stand alone fields.

    I have synced my designer 2013 to my SharePoint site. now below is my input page, but they way i created it was stand alone fields. but instead I want to add the fields directly from my SharePoint, how do i do that, because if i modify anything on my SharePoint,
    then i wouldn't have to modify anything again in SharePoint designer ..
    Also my last question is how do auto generate fields when a certain selection is made in my drop down.. for example if someone chooses NY (in wire-center name drop-down) then WC name:, site code:, and design area is auto filled.
    Thank you for your help....
    Please click this link for image example...
    http://i60.tinypic.com/1679hl0.png

    Hi,
    According to your post, my understanding is that you have an issue about the custom form.
    To custom a form, I recommend you use the InfoPath to design the desirable form.
    What’s more, we can also use the InfoPath to achieve the auto fill field from a drop down list.
    http://www.bizsupportonline.net/infopath2003/autofill-fields-infopath-dropdown-selection-secondary-data-source.htm
    http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • How to find if the SQL Reporting services are stand alone or clustered ?

    Hi All,
    Can any one tell me how do i find if the SQL Reporting services are stand alone or clustered ?
    As there are no other SQL features installed on the server except for reporting.
    Is there any GUI or CLI command to check this ?
    Gautam.75801

    Hello,
    Do not open cluster administrator since SSRS cannot take advantage of Windows Clustering Services.
    You need see if the Network Load Balancing manager (NLB) (windows feature) is installed on the SSRS computer and open
    it to see if a NLB cluster has been configured.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Video for a stand-alone 'ebook' web page

    As an 'A' Level ICT student I have been asked to create an 'ebook' in dreamweaver. This book has to be a stand-alone product that does not rely on server technology or external links to websites. The specification for this work requires that I use video clips, is t5his possible given the limitations of the 'ebook' format?
    Thanks

    My current is:
    env.setProperty(Context.PROVIDER_URL, "iiop://localhost:2809");
    env.setProperty(Context.INITIAL_CONTEXT_FACTORY, "com.ibm.websphere.naming.WsnInitialContextFactory");
    InitialContext initCtx = new InitialContext(env);
    System.out.println("Getting connection factory....");
    // Finding the WAS QueueConnectionFactory
    javax.jms.ConnectionFactory qcf = (javax.jms.ConnectionFactory) initCtx.lookup(JMSCF_JNDI_NAME);
    System.out.println("qcf="+qcf);
    // Finding the Queue Destination
    Destination q = (Destination) initCtx.lookup(JMSQ_JNDI_NAME);
    I am getting exception as:
    Oct 26, 2005 4:10:11 PM com.ibm.ws.naming.java.javaURLContextFactory
    SEVERE: javaAccessorNotSet
    javax.naming.ConfigurationException: Name space accessor for the java: name space has not been set. Possible cause is that the user is specifying a java: URL name in a JNDI Context method call but is not running in a J2EE client or server environment.
    at com.ibm.ws.naming.java.javaURLContextFactory.isNameSpaceAccessable(javaURLContextFactory.java:98)
    at com.ibm.ws.naming.urlbase.UrlContextFactory.getObjectInstance(UrlContextFactory.java:73)
    at javax.naming.spi.NamingManager.getURLObject(NamingManager.java:579)
    at javax.naming.spi.NamingManager.getURLContext(NamingManager.java:528)
    at javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.java:275)
    at javax.naming.InitialContext.lookup(InitialContext.java:347)
    at sender.Main.main(Main.java:29)

  • Timezone Settings for Java Stand alone system

    Hi,
    I want to know the timezone settings that have been set for any Java stand alone system.
    Can anyone help me how to check the timezone settings at Java Stack?
    Incase if I want to change the timezone,which property do I need to change?
    Thank You.
    Regards,
    Sudheer.
    Moderator message - Moved to a less wrong forum
    Edited by: Rob Burbank on Jun 17, 2009 9:05 AM

    You can check it in at the end of System information page in Index.html page.

  • Flash for a stand-alone game.

    Hi all First of all, sorry for bad english.
    I've an idea for a game. Not a browser game, a desktop game.
    Can I use Flash CS 5.5 to develop a real desktop stand-alone game? Yes, I can export my file in a .exe / .app application, but if I use Flash CS, my players will need to install / have, in any case, Flash Player / Air?
    Sorry for stupid question but I'm a little bit confused.

    Oh, yeah, I misunderstood. Thank u very much ^_^
    Uhm, is it possible to modify the Player aspect? I mean, it's still a Flash Player and I'd like it look more "generic" as on OSX: no File, View etc menu, no "Adobe Flash Player" label etc.

Maybe you are looking for