How to run diagnostic
Hi
I know this is a simple tasks but for me its not.
how to obtain this task:
Please upload the Diagnostic: Apps Check output for the process execution product GME to check the file versions you are on.
we are using ebs r12.1.2 with 11.1.0.7 database running in lInux oracle 5
thanks
You need to run the test in (R12 Oracle Process Manufacturing Process Execution (GME): Batch Details Data Collection Test (Doc ID 1411135.1)).
E-Business Suite Diagnostics Installation Guide [ID 167000.1]
Thanks,
Hussein
Similar Messages
-
My ipad dosen't recognise the sim. I was told to do a diagnostic check. How?
The black screen with details of startup runs every time your Mac starts up. All you have done is made it visible. That information is written at EVERY startup into the log file, and can be examined there with Console.app.
There is NOTHING wrong with your Mac.
I find it soothing to see that information go by, but it is not the default. If you prefer not to see it, but just see the flower petal/gear instead, just reset the PRAM back to the factory defaults. [Command Option P R at startup, hold for three or four chimes.]
This will NOT change what happens at Startup -- the same sequence is executed regardless -- it only changes whether it will be shown on screen. -
How to run diagnostic on your mac before installation?
Is there a way to do that even though my hd needs to be installed with an OS?
during installation, it powers off... So I want to know what's wrong...This depends a bit on which mac you are using, so posting that information would help us out here.
You can likely run diagnostics off the recovery partition or installation disk (depending on what mac and OS you are using). Instructions here:
http://support.apple.com/kb/ht1509
If you are on a newer system, as per the directions linked to above, just hold 'd' while starting up.
You can also run disk utility from the installation DVD (hold option while starting up and select the DVD) or recovery partition (Hold cmd-r during startup), and use it to verify/repair disk errors. -
How to run hardware diagnostic with the help of terminal?
how to run hardware diagnostic with the help of terminal? any cmds
Macs newer than 10.7's release just need to boot with the 'D' key.
Otherwise you need to find the original installer disk of the Mac, or call AppleCare for it to be able to run the hardware diagnostic. -
My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:(((( it happen every time if I restart the modem and/or router.. Any idea how to fix this?
Hello Rattisate,
Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro. I would be concerned about this too. You can find information on how to troubleshoot this in the following article:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
http://support.apple.com/kb/HT4628
Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
Thank you for posting in the Apple Support Communities.
Best,
Sheila M. -
HOW TO RUN ADOBE READER IN MACBOOK PRO
HOW TO RUN ADOBE READER IN MACBOOK PRO
Please stop using caps. It is considered shouting and rude.
You need to download the program. The reader runs when needed.
Barry -
How to run 'Get-AssignedAccess' or 'Set-AssignedAccess' power shell commands in c# Application
Hi,
I have console application using which i am trying to run power shell command like 'Get-AssignedAccess' or 'Set-AssignedAccess'.
i am using below code for this it is throwing exception 'Get-AssignedAccess' doesn't exist in cmdlet which is correct because these commands belongs to function category.
using (PowerShell pwInstance = PowerShell.Create())
pwInstance .AddScript("Get-AssignedAccess");
var result = pwInstance .Invoke();
How can we execute this kind of command using c#?
Thanks,Hi prakashlight,
Thank you for comming back and tell us the result. For more information about how to run PowerShell script in C# language, you can refer to this blogpost here:
Executing PowerShell scripts from C#
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi
Does anyone know How to run twin monitors on a MacBook Pro operating on a Windows Server 2008 R2 ?I know this doesn't help you much, but, I think you have to see if your Mac pro does audio out via HDMI. I don't even know if mine does via DVI. I think it may have to do with the adapter. Try going into Audio MIDI and setting the digital out to multichannel
and using the toslink cable for now. Lemme see...apparently DVI does not carry audio at all. Hm. apparently monoprice could be helpful? If I understand what you're saying correctly: you want to take DVI and multichannel audio via the Toslink and have it all go out over HDMI, right? Whooo..... amazon...looks like it's about $100http://www.amazon.com/Audio-SPDIF-Toslink-Converter-Adapter/dp/B0015YYOQQ
just a shot in the dark
I'm probably wrong....or not
John B -
How to run expdp from client ?
Hi All,
I tried searching google and forums for my issue but to no avail > How to run expdp from client side ....like in my laptop.
Because currently our PROD database server has no space for expdp dump file. So I want it directed to my laptop which has an extenal USB of 1TB harddisk...via client EXPDP
import data using impdp command
Posted on: 08-May-2012 11:36, by user: 841731 -- Relevance: 53% -- Show all results within this thread
below command is correct or not? if it is not correct could you please send me the correct command. impdp user/pass@databasename schemas=sourceschemaname remap_schema=sourceschemaname:destinationschemaname ...
System generated Index names different on target database after expdp/impdp
Posted on: 30-May-2012 11:58, by user: 895124 -- Relevance: 43% -- Show all results within this thread
After performing expdp/impdp to move data from one database (A) to another (B), the system name generated indexes has different ...
[ETL] TTS vs expdp/impdp vs ctas (dblink
Posted on: 08-May-2012 21:10, by user: 869578 -- Relevance: 39% -- Show all results within this thread
(table : 500 giga, index : 500 giga), how much faster is TTS (transportable tablespace) over expdp/impdp, and over ctas (dblink) ? As you know, the speed of etl depends on the hardware capacity. (io ...
Oracle Client
Posted on: 21-Jun-2012 22:47, by user: Sh**** -- Relevance: 32% -- Show all results within this thread
Hi Guys, Please can you guys elaborate the difference between Oracle Client and Oracle Instant Client. Also, please can you advise from where I can download the Oracle normal ...
Oracle 10g Client
Posted on: 05-Jun-2012 10:11, by user: dzm -- Relevance: 26% -- Show all results within this thread
to search at oracle site and this forum, but i wasn't able to find a link to download the oracle 10g client. I really need especificaly the 10g version. Anybody know the link or another way to download ...
9i client to access 11g database
Posted on: 22-Jun-2012 07:31, by user: kkrm333 -- Relevance: 24% -- Show all results within this thread
Hi, Can i access a 11g database using 9i client? Thanks,
SQLplus in Oracle Client
Posted on: 14-Jun-2012 00:36, by user: Tim B. -- Relevance: 24% -- Show all results within this thread
Hi, I tried to install an 11g oracle client in linux. As I've compared the files with the files when you install using the oracle instant ...
Re: Information on Oracle Client 11202-1.1.4-6
Posted on: 05-Jun-2012 03:33, by user: 898763 -- Relevance: 23% -- Show all results within this thread
Actually thats the client requirement
Analysing the performance of a single client
Posted on: 28-Mar-2012 02:05, by user: 880172 -- Relevance: 23% -- Show all results within this thread
timeouts even on some of the simplest queries. I want to try and get some data about how just this one client is performing and what it’s doing, but everything Google has thrown up so far is orientated around ...
to make client connection as sys
Posted on: 12-Jun-2012 22:04, by user: user11221081 -- Relevance: 23% -- Show all results within this thread
Dear gurus can i connect to my server from my client machine with sysdba without giving sys password i have connected in different ways as sys@abc ...Thanks a lot.Though you can initiate the binary from your client side but for the file creation, there is no other way but to store it on the server side. So your best bet would be to get some space free on the server side of yours.
Aman.... -
How to run a Concurrent Program from the back end?
Hi,
How to run a Concurrent Program from the back end?
Is it Possible to see that Concuurent Request id which we run from the back end, in the front end?
If yes, then Please Give reply how to write the code
Thanks in Advance,
Bharathi.SThis is documented in Chapter 20 of the Application Developers Guide http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121devg.pdf. These MOS Docs also have some information available
221542.1 - Sample Code for FND_SUBMIT and FND_REQUEST API's
235359.1 - How to Launch Planning Data Pull MSCPDP using FND_REQUEST.SUBMIT_REQUEST
HTH
Srini -
How to run a report from oracle 10g form in .csv format
dear all,
how to run a report from oracle 10g form in .csv format? i've already run in pdf & excel format.
i'm using
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'PDF'); --for pdf
SET_REPORT_OBJECT_PROPERTY (ro_report_id, report_desformat, 'SPREADSHEET'); ---for excel
Please Help..i have already tried.
but the report show in htm or html format. that file will not save into csv. please help. -
How to run a script on Oracle server from isqlplus
Hi I am trying to run a script on my workstation from Oracle server through isqlplus workarea. I entered following command and get the following error. i have enabled isqlplus URL by editing web.xml file already. Can please someone help how to run the script?
@http://myaixserver.com:5560/scripts/Databasestartupstages.sql;
SP2-0920: HTTP error 'page not found (505)' on attempt to open URLSo far, you haven't specified your rdbms version and isqlplus behaved differently on a 9iR1, 9iR2 from the one release on 10gR1/R2. on 9i it was a servlet based on a JServ servlet executor machine, meanwhile on 10g it is a J2EE compliant application deployed on an OC4J container, so configuration is different.
You may want to take a look at these references -->
* Starting iSQL*Plus from a URL
* Creating Reports using iSQL*Plus
~ Madrid -
How to run the form that is only installed on a PC and not using a server?
Hi
I am new to Oracle and have taken the forms class. But I do not understand how to run the form from my PC using XP windows. (Do not have access to a server).
I have started the OC4J, made sure the listener was started, compiled the form and then when I run it, it automatically goes to the HTTP:
ERROR: res://ieframe.dll/acr_depnx_error.htm#,http://kevin:8889/forms/frmservle
I connected to the database correctly. I can process a report and it does nor try to access the internet. My only issue is running the form. I verified it compiled.
Sorry for a basic question. Could someone please help, I tried reviewing other questions, but not sure if they are connecting to a server or not.
I see webutil but is it required if I don't have a server? Thank you in advance.Regardless of the version, it appears that you may not have configured the Builder. Do the following:
1. Open the Builder
2. From the menu, select Edit > Preferences > Runtime
3. In the box labeled "Application Server URL:", enter a local URL needed to run a form OR click the button labeled "Reset to Default". If you decide to manually enter a value, it would looks something like this:
http://localhost:8889/forms/frmservlet
4. In the field labeled "Web Browser Location:", enter the path and executable to your preferred browser. So for example if IE is your browser of choice the entry would most likely look like this:
C:\Program Files\Internet Explorer\IEXPLORE.EXE
5. Click on OK and retest.
By the way, you can manually enter a URL in the browser. Clicking the RunForm button from the Builder is strictly optional. To run the "test" form directly from the browser enter the following into the browser's address field:
http://localhost:8889/forms/frmservlet?form=test
More information about Forms can be found on OTN:
http://www.oracle.com/technology/products/forms/index.html -
How to run SmartCard Application on PC
hi,
i want to know how to convert class file into a CAP file and how to run on PC a smartCard Application. when i use converter use from command prompt then it will ask the AID how i get the AID at Conversion time. pls tell me the procedure for Convert and run the application on PC.
pls help me.You can use the suggestions in the below blog to test your app on another PC.
http://blogs.msdn.com/b/patricka/archive/2012/11/05/how-do-i-deploy-a-windows-8-app-to-another-device-for-testing.aspx -
How to run the PioneerCyclingJSP and MotorPriseJSP modules at a time
Guys,
I would like to run the PioneerCyclingJSP and MotorPriseJSP modules at a time.
Could you please suggest me the steps to run both servers at same time on JBOSS 5.0 with ORACLE.
How to run a more that one server instance...
Thank youYou should be able to include both modules when building your ear file. Then both the module's war files will be created in the ear file. Access both the applications with their respective /PioneerCycling or /motorprise ( look for context root in application.xml)
If you want to run each application on different server, then
1. create 1 individual instances of jboss server for pioneer and another for motorprise
2. create additional dynamo server using command makeDynamoServer.bat motorprise 8861 8851
3. deploy each one on respective server folders in jboss
Use the appropriate ports to access ( say for ex:)
localhost:8860/pioneer
or
localhost:8861/motorprise
-karthik
Maybe you are looking for
-
CD drive dead (but dvd's boot)???
Help! A few monthes ago my internal CD reader/writer started acting funnny. Some days the door would not open and close, and it would mysteriously not show up in my system profiler. On other days only itunes would work to open and close the doors, an
-
Every time I sync my Iphone and iPad to itunes it makes me restore them. Why?
Every time I sync my Iphone and iPad to itunes, it makes me restore them, Why does it do this?
-
I was downloading the last software for my ipod 60gb video when i disconnect from the computer and i get frozen in the screen charging the software (thea aplle and the bar) then it turn off and i can't power on again i connect it to the PC an it do n
-
Hey, can someone tell me the difference between AMD Radeon HD 6480G discrete-class graphics and ATI Radeon™ HD 6480G? And how much of a difference is 400 Mhz in a procressor if the one with 400 mHz more is i3 while the lower one with turbo ability t
-
Idoc - Error Status 51: Incorrect function module called up
Hi, In the receiver system for the custom message type, I got this error. Incorrect function module called up Can any one pls help me to solve this one. Regards, Bala Raja