How to run labview in debug mode

Two questions:
1. how to run labview in debug mode
2. how to save default text values in labview

Hi,
consider i have streaming bits of data as input who length varies each time. I need to select 11 bits at a time and apply (15,11) hamming coding for the inputs till the input is stopped.
I have designed the hamming encoding and decoding block. I need a methodology to select 11 bits at a time from the input and provide to the hamming encoder.
eg: if input is 1100 bits, output must be 1500 bits.
I have uploaded the encoder and the decoder part. Please suggest me the design to read the input and append the output.
Attachments:
project_HammingEncode.vi ‏19 KB
project_HammingDecode.vi ‏22 KB

Similar Messages

  • Running APPS in Debug Mode

    Hi all,
    I would like to know how to run APPS in Debug Mode. I know the steps to enable debug mode at apps tier server level as below...
    Log into the apps tier server as apps tier manager.
    Edit $APACHE_TOP/Apache/conf/httpd.conf
    LogLevel debug
    Edit $APACHE_TOP/Jserv/etc/jserv.conf
    ApJServLogLevel debug
    Edit $APACHE_TOPJserv/etc/jserv.properties
    log=true
    wrapper.bin.parameters=-DAFLOG_ENABLED=TRUE
    wrapper.bin.parameters=-DAFLOG_LEVEL=UNEXPECTED
    wrapper.bin.parameters=-DAFLOG_MODULE=%
    wrapper.bin.parameters=-DAFLOG_FILENAME=$APACHE_TOP/Apache/logs/aferror.log
    Edit $APACHE_TOP/Jserv/etc/ssp_init.txt
    DebugLevel=5
    DebugSwitch=ON
    Bounce the Apache Services for changes to take effect.
    Now my question is, I want to know how to debug APPS in freont end. i.e.., I want to do it in APPS screens, if I do it at the apps tier server level, it'll be for all. But I want to do it for a single user (Just like running GUI tools such as VB,D2k in DEBUG mode).
    Regards
    -Mahesh

    Hi Sharon,
    Thanx for the reply.
    Actually, I don't want to debug using any profile values. As I pointed out, if we set the profile value debug mode is enabled for all the users using that particular module. But I want to do it for a single user, who wants to run in Debug Mode. Any more updates on this?
    Regards
    Mahesh

  • Project runs Ok in debug mode but not in release mode

    I have an application developed with VC++ 6.0 and measurement studio. The application controls SCXI-1161/1166 relay boards to connect the UUT. The application runs ok in debug mode, but in release mode the application can't drive the relay boards. I have tried to change optimizations mode, it didn't work. Who can tell me how to solve the problem? Thanks!

    It sounds like you have an older version of our SWITCH driver which relies on our DAQ driver. I would recommend uninstalling the Traditional DAQ, DAQmx, and SWITCH drivers and then installing the newest version. At this point you have 2 options:
    1) You can download Traditional DAQ 7.4, DAQmx 7.4, and NI-SWITCH 2.4 drivers bundled together here: ftp://ftp.ni.com/support/daq/pc/ni-daq/7.4/
    2) You can install the latest version: NI-DAQmx 7.5 here: http://digital.ni.com/softlib.nsf/websearch/CF7ECC​EA4C4CC7DE86257038004D88AE?opendocument&node=13206​... This has support for all of our USB DAQ devices (if you're not using them then you may not want to worry about installing this now) and then install Traditional DAQ 7.4 here: http://digital.ni.com/softlib.nsf/websearch/C36A54​ADDA3DC33D86257038004E55E6?opendocument&node=13206​... and NI-SWITCH 2.4 here: http://digital.ni.com/softlib.nsf/websearch/9D6B8C​7FD41BF3D08625702E0072E294?opendocument&node=13206​...
    This should solve your problem.

  • Eroor in eclipse when i have run TOMCAT in debuge mode web service debuging

    hello all,
    i have a serious problem with debug my web service. I set local variable in eclipse (-Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000). And now if i run TOMCAT in normal mode all worked fine and i run remote java application fine, but if i run TOMCAT in debug mode, eclipse in console return error:
    "Error occurred during initialization of VM
    agent library failed to init: jdwp
    ERROR: Cannot load this JVM TI agent twice, check your java command line for duplicate jdwp options."
    If anyone have this problem please tell me how to resolved it.
    Thank for help.

    Eclipse is kind of a competing product so this is not the best place to ask the question. With that most will be nice enough to lend a hand. I suggest ensuring that all other instances of tomcat are stopped then try again. In the Debug perspective ensure there are no servers running with the same name as the one you are attempting to use. If all else fails ensure there are no tomcat process running if they are kill them. Finally, if you cant get it to work reboot. If still no good the Eclipse might be a better place to go.

  • Program running fine in Debug mode but failing in direct execution

    Hi All,
    I am facing a peculiar problem, I have created a report that create STO then Delivery and then Shipment one after one. I have used BAPI to do so. If STO creation is successful then Create Delivery and if delivery creation is also successfull then create Shipment.
    When I run this program by pressing execute button it is only creating STO and coming out ,but if I run it in Debug mode I get all the three( STO, Delivey,Shipment). Since it run fine in debug so I can't found where the problem is.
    Can any one help???
    Regards
    Hemant

    Hi guys,
    A learning for me .... how important WAIt parmeter is in commit work .. Initially i have not set WAIT paramater in commit BAPI to X due to this further processing.. Delivery and Shipment creation was failing in direct execution ... as after STO creation I was reding EKPO and that was failing in direct execution , but in backgroung everything was ok.
    Thanks for your time.
    Cheers
    Hemant

  • Can't Run program in Debug Mode

    To: [email protected]
    cc:
    Subject: Can't Run program in Debug Mode
    Has anyone else experienced this problem? We have written a non-express
    program that uses the Express generated services project as a supplier
    plan. However, when we try running this program in debug mode about 50%
    (or more) of the time we abend while Forte is trying to partition the
    application. Since we have many database classes in our Business Model we
    are wondering if Forte is timing out during the partition phase or if the
    server partition is running out of memory . The following error messages
    are produced by Forte. Any suggestions???
    =======================
    Error messages on client:
    =======================
    SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
    any
    of the nodes to which it has been assigned. See the remainder of the
    error
    stack for more information.
    Class: qqsp_ResourceException
    Error #: [1602, 593]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
    Last TOOL statement: method overview.StartApplication
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
    admin2.
    Class: qqsp_ErrorDescriptor
    Error #: [1602, 592]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Lost contact with remote server while trying to load
    partition
    testacadprogoffer_CL0_Part1. Check server log file for more information
    about
    the specific problem.
    Class: qqsp_ResourceException
    Error #: [1301, 102]
    Detected at: qqem_IPartitionAgent::Startup at 5
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Tue Dec 02 12:56:00
    Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
    (object name Unnamed) from partition "Forte_Executor", (partitionId =
    F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Network partner closed connection. This usually means the
    process at the other end of the wire failed. Please go look there and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Received close: Connection aborted (10053).
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    =======================
    Log messages on server:
    =======================
    Attached to manager for node admin2.
    aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
    aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
    aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
    aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
    aud Tue Dec 2 10:47:03 : Loading partition
    EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
    owner's partition.
    aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
    aud Tue Dec 2 11:09:26 : Unloaded partition
    EvaluateApplRequirementsBO_CL0_Part1.
    aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
    aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
    FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:49:01
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
    askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
    "Forte Runtime", pid 14020 on node admin2 in environ
    ment CentralEnv.
    FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:48:57
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    ERROR: TMgr.RunThread: task cm.Recv failed terminating.
    Probably caused by a FATAL exception.
    David Wilbur email: [email protected]
    University of Windsor phone: 519-253-3000 ext. 2779
    Windsor, Ontario Canada
    -----------------------------------------------

    Hi,
    We have had the same problem in a non-express application
    with a heavy server partition. In our case, the error was not
    systematic, depending on the server workload at the time we
    tried to partition and run.
    The work-around we're using is to put the -fm flags (increasing the x
    parameter to say 30000) in the 'server arguments' of your server
    partition
    properties in the partition workshop. Note that if your server is a Unix
    platform,
    you need to put double-quotes before and after the parenthesis in the -fm
    syntax.
    Hope this helps,
    Vincent Figari
    BTW, what Forte version are you using ?
    On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
    writes:
    >
    >
    >
    >
    >
    To: [email protected]
    cc:
    Subject: Can't Run program in Debug Mode
    Has anyone else experienced this problem? We have written a
    non-express
    program that uses the Express generated services project as a supplier
    plan. However, when we try running this program in debug mode about
    50%
    (or more) of the time we abend while Forte is trying to partition the
    application. Since we have many database classes in our Business
    Model we
    are wondering if Forte is timing out during the partition phase or if
    the
    server partition is running out of memory . The following error
    messages
    are produced by Forte. Any suggestions???
    =======================
    Error messages on client:
    =======================
    SYSTEM ERROR: Unable to start the partition
    testacadprogoffer_CL0_Part1 on
    any
    of the nodes to which it has been assigned. See the remainder of
    the
    error
    stack for more information.
    Class: qqsp_ResourceException
    Error #: [1602, 593]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
    Last TOOL statement: method overview.StartApplication
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
    node
    admin2.
    Class: qqsp_ErrorDescriptor
    Error #: [1602, 592]
    Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    SYSTEM ERROR: Lost contact with remote server while trying to load
    partition
    testacadprogoffer_CL0_Part1. Check server log file for more
    information
    about
    the specific problem.
    Class: qqsp_ResourceException
    Error #: [1301, 102]
    Detected at: qqem_IPartitionAgent::Startup at 5
    Error Time: Tue Dec 02 12:56:01
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: The connection to the partner was terminated by the
    Communication
    Manager for the reasons below.
    Class: qqsp_DistAccessException
    Detected at: qqdo_PartitionMgr::StopLocation at 1
    Error Time: Tue Dec 02 12:56:00
    Distributed method called:
    qqrt_ForteExecAgentProxy.LoadPartition!6
    (object name Unnamed) from partition "Forte_Executor",
    (partitionId =
    F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Network partner closed connection. This usually means
    the
    process at the other end of the wire failed. Please go look there
    and
    find
    out why.
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 2
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    INFORMATION: Received close: Connection aborted (10053).
    Class: qqsp_DistAccessException
    Detected at: qqcm_HoseFSM::ReceivedClose at 1
    Error Time: Tue Dec 02 12:56:00
    Exception occurred (locally) on partition "Express_cl7_Client",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
    taskId =
    [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
    application
    "FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
    CentralEnv.
    =======================
    Log messages on server:
    =======================
    Attached to manager for node admin2.
    aud Tue Dec 2 09:34:36 : Loading partition
    testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
    aud Tue Dec 2 09:41:59 : Unloaded partition
    testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 09:49:44 : Loading partition
    testacadprogoffer_cl0_Part2
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
    aud Tue Dec 2 10:00:12 : Unloaded partition
    testacadprogoffer_cl0_Part2.
    aud Tue Dec 2 10:18:34 : Loading partition
    testacadprogoffer_cl0_Part3
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
    aud Tue Dec 2 10:27:00 : Unloaded partition
    testacadprogoffer_cl0_Part3.
    aud Tue Dec 2 10:47:03 : Loading partition
    EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
    agent
    owner's partition.
    aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
    aud Tue Dec 2 11:09:26 : Unloaded partition
    EvaluateApplRequirementsBO_CL0_Part1.
    aud Tue Dec 2 12:36:14 : Loading partition
    testacadprogoffer_CL0_Part1
    built on <unknown>.
    Attached to manager for node admin2.
    aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
    aud Tue Dec 2 12:45:17 : Unloaded partition
    testacadprogoffer_CL0_Part1.
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
    FATAL ERROR: ************* Out of Memory, requested (1K) available
    (0K)
    Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:49:01
    Exception occurred (locally) on partition "Forte_Executor",
    (partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
    askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
    application
    "Forte Runtime", pid 14020 on node admin2 in environ
    ment CentralEnv.
    FATAL ERROR: ************* Out of Memory, requested (1K) available
    (0K)
    Class: qqsp_ResourceException with ReasonCode:
    SP_ER_OUTOFMEMORY
    Detected at: qqos_MemoryManager
    Error Time: Tue Dec 2 12:48:57
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
    ERROR: TMgr.RunThread: task cm.Recv failed terminating.
    Probably caused by a FATAL exception.
    David Wilbur email: [email protected]
    University of Windsor phone: 519-253-3000 ext. 2779
    Windsor, Ontario Canada

  • How to start weblogic in debug mode ? and how to set the eclipse in the deb

    how to start weblogic in debug mode ? and how to set the eclipse in the debug

    Put this in JAVA_OPTIONS :
    Xdebug -Xnoagent -Djava.compiler=NONE -Xrunjdwp:transport=dt_socket,address=3999,suspend=y,server=y
    After restarted weblogic, in eclipse set your breakpoint , open debug perspective then choose Remote Java Appliction and configure Connection Properties (host=localhost and port=3999)

  • How to run Labview apps in tablet with android os

    How to run Labview application in tablet with android operating system?
    Can we use Labview mobile module or we must use google play data dashboard for labVIEW? how to install it in PC?
    Solved!
    Go to Solution.

    If you had looked at data dashboard and some of the other links on Android, you would see that you cannot run a LabVIEW app on Android. Nor can you use a serial port. With Data Dashboard, you have a pc running LabVIEW and it publishes to network shared variables. Data Dashboard on the Android allows you to view those variables.

  • How to run SPAU & Custom Objects Mod

    Hi
    I am new to upgrade , Can anyone guide me how to run
    SPAU & Custom Objects Mod
    Thanks
    Parin
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on Oct 30, 2011 10:41 AM

    Hi Ramana,
    what kind of report you want to  execute? the report is Executable Report or Modulepool prog. ??
    if it is a executable program so when u execute (F8) from SE38 when u find the selection-screen in the menu bar ->Program ->Execute in Background( F9) option exits there u can schedule your report in Background or else use toce SM36 ( Define Background Job).
    Why you want to run it in background with transaction code if you have this options?
    Regards,
    Sunil kairam.

  • How to run labview program in debugging mode in windows 95 version

    Respected all,
    I am facing probelm while running probe.vi.
    I received this command "connection to acquisition board was not found" when i run labview program.
    I  am using labview 5.1, fieldpoint FP 1000, NI-DAQ 6.5, Field point explorer version 1.6, Measurement and Automation Explorer 1.0.1.
    I would kindly request you please help me how to run my program probe.vi in debugging mode in windows 95 version, so that i can locate where error occurs.
    Thanking You
    Yours faithfully
    M.Vijay

    Respected Norbert,
    Thank you very much to for your help.
    Norbert : Possible reasons are e.g. wrong IDs for measurement devices. If the error is connect to the FieldPoint, it is possible that it isn't configured correctly.
     I am using Field point explorer 1.6, The Field point instrument FP 1000 and RS-232 port is using. It is confirmed that the field point instrument is working properly by LED light indication test.
    Norbert: It sound like you are using DAQ devices (like PCI MIO 6952E) in the application. Are you sure that you select the correct device ID for this?
    I am asking you to know, If i using Labview and  Fieldpoint instrument FP 1000 to monitor my parameter interms of All, Channel 0, Channel 1, Channel 2, Channel 3, Channel 4, Channel 5, Channel 6, Channel 7 for my measurement.
    But now i need to solve the command connection to acquisition board was not found, The expert say this command is due to there was no AT-AO-10 Analog Output board was present in CPU.
    I do not find AT-AO-10 Analog Output board in my CPU, Previously the instrument was worked perfectly by other person who assembled everthing to measure temperature.
    The only aswer know send by previous person is if my task does not imply the use of a DAQ you probably have to locate where the DAQ driver is called and exclude it from the program. try to run the program in debugging mode so that you can locate where the error occurs.
    I do not know how to proceed his instruction. So i would kindly request you to please help me to solve my probelm.
    I also removed AT-AO-10 software from device manager >> Data Acquisition system >>  AT-AO-10 just now.
    I also find GPIB version 1.30, when i remove in add or remove program, it say that Error removing the GPIB.
    I am eagerly waiting for your help.
    Thanking You
    Yours faithfully
    M.vijay

  • Running Form in Debug Mode: How? (Appletviewer/J initiater)

    Hi All,
    I have a sitiuation where i would like to run a form with debug_messages='YES'. The form is compiled under Forms 4.5 16 bit Windows 95. It is run with J-Initiater under a NCA enviroment. Is there a command parameter to run the fmx in debug mode, probably as a applet parameter or something.
    Thanks,
    Easo

    You can also check Francois Degrelle excellent answer to the same question:
    Running a form in debug mode

  • How to start weblogic in debug mode from BEA WebLogic Eclipse plugin

    I have a problem making weblogic work with eclipse3.1. I am using a BEA WebLogic plugin to handle weblogic (start/stop) from eclipse. However I want to debug my application and I am unable to figure out a way to start my weblogic in debug mode like we do in WSAD. I tried using some other plugins also but no luck. Please suggest me a plugin to handle this or any other way of debugging my application from eclipse. I am using weblogic 8.1.

    Hi,
    Dev Environment
    weblogic eclipse plugin 2.0 beta
    weblogic server 8.1
    eclipse 3.1.1
    Created a server that i would like to deploy my EJB so that i can put break points on my EJB in eclipse.
    How do i do it?
    I managed to deploy an ear (containing the ejb) directly to the weblogic installed folder and it deployed the ejb. But the breakpoint set in eclipse is not triggered. Of course in this case as weblogic server is running the .ear file deployed manually in the file system.
    Any help is appreciated.
    Mel

  • Why can't I run in non-debug mode???

    I recently copied a JSC project into another project using the "Save Project As" option when right clicking on the project name.
    The new project appeared to copy fine and I was able to bild and run the project normally.
    Somewhere along the line, I did something that changed something to where I can no longer run the project in 'non-debug' mode by using either the 'Run Main Project Ctrl+F5' under the 'Run' menu or by clicking the Right Green 'Run" triangle on the main menu.
    The project builds successfully, but never runs in the browser.
    I have tried stopping the server and everything else I can think of, but nothing works.
    I can select 'Debug Main Project F5' from the 'Run' menu and it will build and start in the browser.
    Other projects, including the source for this one, run fine in 'nion-debug' mode, but not this one.
    How can I fix this??
    I have run into instances where I get a message that says the build.xml file was altered externallt and was rebuilt. Is there any way to force a remake of the build.xml file using "Standard" defaults?
    Thanks

    The reason for copying the project was in order to create another very similar product that required only minor modifications at this time.
    I got around the problem by doing another project copy and then using Beyond Compare to update the new copy with modifications I made to the original copy.
    That worked.
    My basic question was what would cause the problem that would create the situation where you could run in debug mode, but not non-debug mode.
    This happened after the original copy (that worked fine) and after I had done most of the required modifications.
    My thought was that there was some file or parameter that I could change rather than redoing the process.
    Apparently not......................

  • Run form in debug mode with windows vista

    hi guys
    plz help me
    i'm using oracle forms 10g r2 on windows vista home primume and everything is ok but
    when i need to run any form in debug mode i get the following
    the jvm 1.4 give me jvm is aborting after that
    the oc4j give me the following error frm-92101 there was a failure in the form server during start up
    thanks

    Hi Manoj,
    You can do it directly from felix console. just go to http://<host>:<port>/system/console/slinglog there you will see all log files. under first table "Log Level" you will see all the log files and besides to that you will have configuration option, just go there and set log level for each of log files and save it.
    Let me know if you need more information.
    Thanks,
    Pawan

  • How to run in 32 bit mode on a mac 10.6.7 so I can use Rapport Trusteer

    The security software Rapport Trusteer for HSBC bank has just been updated to run on Firefox 4 but will only run in 32 bit mode, I am using Snow Leopard 10.6.7. How do I change Firefox 4 to run in 32 bit mode?

    You're welcome

Maybe you are looking for

  • I've given up on Safari.  Thanks for being there Firefox.

    Love Apple products but nothing is perfect.  I had to stop using Safari for my online banking with USAA, the most awesome bank ever, because Safari would not allow for full functionality with the USAA site.  I worked with USAA developers for more tha

  • External hard drive seen in Disk Utility, but will not mount.

    My external hard drive has power and is spinning, but will not mount.  It was fine yesterday.  It shows up in Disk Utility and is verified and repaired.  Tried the drive on 2 other macs with same result.  Tried a new enclosure and that did not work. 

  • HT4972 need to download iOS 5, where can i find it?

    where do i find the iOS 5 to download to my iphone 4? its not in my itunes

  • Oracle.xml.sql.query.OracleXMLQuery   GetXML -withDTD

    I'm trying to create a dtd for each table in my schema. I've created a java program that loops through the user_tables and I am then trying to create the DTD with oracle.xml.sql.query.OracleXMLQuery -withDTD. I am able to make it work using the XSU C

  • BANK DRAFT

    Hello All, How can i go about in generating payment instruction for Bank Draft  after posting vendor invoice. Am using F110 to generate Payment Instruction that i send to banks to pay vendors.Which Tcode or how, after posting the vendor invoice to ge