How to run QT and Photoshop at same time?

Hi there, does anyone know how I can keep BOTH my Photoshop file windows AND a Quicktime movie open and running at the same time. I am trying to follow a set of QT tutorial movies that I downloaded from a podcast (and I've also tried using a Photoshop Tutorial CD adn same thing happens). The problem is when I try to follow along by having a Photoshop file open, the minute I click on the QT all my extra Photoshop windows (layers, brushes, history, etc) disappear, leaving just the file. This is no good because what I'm trying to do with the tutorial is to duplicate what they are doing in those windows. Of course when I click back into Photoshop they reappear but by this time the QT movie has raced ahead and the minute I go to pause it .... Photoshop goes again ... is there a way to keep all windows to both applications visible ?

Short of using a second monitor (mirror) there are a few tricks you could try.
Open the QT file and shrink the display size. You can do this by dragging the "grow" window (lower right corner) or using keyboard shortcut Command-0 (half size).
Adjust the Photoshop window to a smaller size and arrange the toolbars so you can "view" the underlying QT file.
Next is to keep your hands off the mouse (except in Photoshop).
The spacebar will start and stop playback of the QT file. Use the arrow keys (right and left) to "step" through frames.
Your workflow might be something like this:
Begin the QT file and pause it using the spacebar. Command-Tab (tab key) to switch to PS. Review the work and switch again via Command-Tab.
It will take some patience and practice to get the right combinations.
You can also gain some screen "real estate" by setting your display size to the highest possible settings. System Preferences/Displays is where you'll find these options.

Similar Messages

How to Slice Video, and Audio at same time

Hello Everyone.
When I click on Control K, it dose create a Slice in my Timeline, I want to create a Slice for my Audio as well, at the same time.
But every time I Slice a Video, and when I want to delete the Slice portion of the movie that I cut, the audio is still there, and I have to use the Razor Tool to select the cut portion under the Sliced movie.
Thanks
Simon.

Rod,
Through CS3, Ctrl+K worked on all Unlocked Tracks. With CS4, things changed a bit, as one could now Target multiple and even none contiguous Tracks. Ctrl+K still functions the same BUT now only affects Tracks that are Targeted, so no need for Locking them anymore. This has not changed with CS5.
Hope that this helps - it was changed as of CS4.
Hunt
PS - another workflow in CS3 and before, is to do the Crtl+K and then just ignore the Cut in some of the Clips, and just Alt+clicking on what you wish to remove, leaving the others alone. Though there is a Cut, one does not have to concern themselves with them, unless they wish to. Personally, I like the CS4 and later way of doing it - saves that Locking/Unlocking, or having to Alt+click to do things. However, I am a lazy sot.
PPS - Colin brings up a good point - how one has mapped THEIR keyboard shortcuts.

How to run report from multiple user same time

Hi,
We are using oracle database 11g R2
Oracle Forms & reports : 11.1.2
O.S : Windows & Professional
We have install oracle database, Oracle forms & reports in server. Near about 25 users are accessing that database, forms & reports from server through browser.
I have one problem, when users runs a report there report goes in queue and runs one by one in FIFO manner.
If one user has a report that take long time other users has to wait for that time.
Can it is possible to run reports in multitasking manner, i.e multiple report can be run simultaneously.
http://servername:7001/reports/rwservlet/showjobs?
Using above url am able to see jobs in queue.
Thanks in advance.

Hi Denie,
I am new to it and don't know how to add engines to server.conf , can you please tell me how to add engine to it.
I search server.conf file but i did't found it.
Please help..
Thanks in advance.

How to run a servlet at the same time when server started

we are using tomcat server pls tell me clearly it's urgent

Clearly you're also annoying. Fourth thread, same topic.
http://forum.java.sun.com/thread.jspa?threadID=724541&messageID=4176289#4176289

How to run two query in the same preparedStatement

Hi all,
Please tell me how to run two queries in the same preparedStatement object ?
In my module I have to run two queries and I don't want to make two methods for running two different queries.
I just want to call this method for both of my queries.
methodName(long param)
Connection conn=null;
PreparedStatement pstmt=null;
//////////////// some coding
Please Help !
Thanks in advance
amitindia

    public void foo()
        Connection connection = null;
        PreparedStatement stmt = null;
        try {
            connection = ...get from pool...;
            stmt = connection.prepareStatement("...");
            ...fetch results...;
            stmt.close();
            stmt = null; // So the finally statement works if there is an exception
            stmt = connection.prepareStatement("...");
            ...fetch results...;
        } finally {
            if (stmt != null) ..close it...;
            if (connection != null) ..return it to pool...;
    }

How do I transform a clipping path and layer at same time?

I have a bunch of images with clipping paths that need to be altered. Most images need skewed or distorted, and I can't figure out how to transform the path at the same time I transform the layer - so I do not have to create new paths. Thanks
Working in Photoshop CS2

I’m afraid You will have to employ a workaround.
I would recommend applying the Path as a Vector Mask to the Layer (with the Path selected command-click on the Add Layer Mask-button in the Layers-panel), then transforming, subsequently duplicating the Vector Mask and removing it from the Layer.
Or copy-paste it into the existing Clipping Path and then remove it.
Some part of the procedure may be automate-able with Actions or Scripts and hopefully it will still save at least some time.

I cant use photoshop and illustrator in same time....

Hello!
I have CS3 and i´ll try run photoshop and illustrator in same time. If i run first photoshop then illustrator not work and if i run illustrator then photoshop not work. :-/ What i pose to do??
PC:
AMD FX (Six-core)
Memory 8G (XP 32bit -> ~4G)
Thanx anyway!

Read this probably the scratch disk you haqve is too full, and you will have to select a scratch disk that is not fragmented and has plenty of room to work. The scvratch disk is storing the various undo states for both Photoshop and Illustrtor.
Illustrator has unlimited undos so that takes up a lot of scratch space if you do complex art work with many points being employed to create the art and Photoshop will do the same if you are using very high resimages with many layers.
And in 32 bit the amount of RAM is limited which puts a strain on the scratch disk so it has to bve very large if you want it to work for you.
This is what I recommend to you go 64 bit get another 8 GB of Memory at least and get a hard drive you can use as a swcratch disk that will not have any files on it or that you can partition to have a large amount of free space.
You will have to read a little bit but you can start here:
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html#main_Memor y_Usage
I am on a Mac myself and have 24GB of memory and feel I could still use anoter 8GBs but I do some motion graphics as well.
Nut if you do a lot of Illustrator and Photoshop that can be just as big a drain on your resiources.

What would you recommend as best quantity Ram. to run Lightroom and Photoshop CC?

What would you recommend as best quantity Ram. to run Lightroom and Photoshop CC?

Hi There,
Kindly check the system requirement for the same.
Photoshop: System requirements | Photoshop
Lightroom: System requirements | Lightroom
Thanks,
Atul Saini

How to collect form responses in adobe formscentral and at the same time receive form responses through email

My client wants to have the form that I created in FormsCentral to be able to collect email responses. So to do this, I downloaded the form as PDF then imported it into Acrobat. I created a button in Acrobat (this will be for the email response part). I used this script for that function:
// This is the form return email. It's hardcoded
// so that the form is always returned to the same address.
// Change address on your form to match the code below
var cToAddr = "[email protected]"
// First, get the client CC email address
var cCCAddr = this.getField("ClientEmail").value;
// Now get the beneficiary email only if it is filled out
var cBenAddr = this.getField("BennyEmail").value;
if(cBenAddr != "")
cCCAddr += ";" + cBenAddr;
// Set the subject and body text for the email message
var cSubLine = "Form X-1 returned from client"
var cBody = "Thank you for submitting your form.\n" + "Save the filled form attachment for your own records"
// Send the entire PDF as a file attachment on an email
this.mailDoc({bUI: true, cTo: cToAddr, cCc: cCCAddr, cSubject: cSubLine, cMsg: cBody});
I got it from here: http://acrobatusers.com/tutorials/dynamically-setting-submit-e-mail-address
I'm still kinda not sure how it works but I'm getting the idea. Now what I'm having trouble with is, how do I make it so that the user will be required to click on the scripted button and at the same time, also click on the FormsCentral's generated submit button? Because as I see it, the user can click on the scripted button but they can just close out the form without submitting it to FormsCentral.
Is there any way to make my idea work?
Any help is very much appreciated!
Thanks!

I do not know or have time right now to look up NDP format.
To write to NTFS from Mac, you need a driver.
And to write to HFS from Windows also.
I strongly recommend Paragon drivers for both.
That way you can access anything from any platform.
Paragon Software for Mac

How can I copy documents from a Sharepoint On Premises library to a Sharepoint Online library and at the same time preserving their metadata?

How can I copy documents from a Sharepoint On Premises library to a Sharepoint Online library and at the same time preserving their metadata?
I use the Open Explorer Windows to drag and drop the files, but the metadata are not copied. Thanks.

To maintain the metadata you'll need to use one of the third party tools that does this kind of migration. Metalogix has a product with a free trial that we have used before. (Don't remember whether the free version maintains metadata or not).
You can read about it here:
http://www.metalogix.com/Products/Content-Matrix.aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

How do i get a still image to fade the same way and at the same time as a video?

I have a video stacked on top of a still image. When i add a transition, the still turns to a black screen while the video fades in accordance to the transition. How do i get the still image to fade the same way and at the same time as the video?

I do. I've applied it to both the still image and the video. Say i used the lens flare transition. If i apply it to both the video and the still image, the video will dissolve in to the next frame, but the still image will go to a black screen and then jump to the next frame. Its almost as if i inserted a black frame instead of a transition, but only for 2 seconds. Below is kind of a peek what it looks like.

How to use image and text in same component

Hello
Do you know how to use image and text in same component in java ?
because i need this in my project ,which is chat application , to
put the received text and any image if it is need within the text

thanks levi_h
JTextPane class extends JEditPane and allows you to embed
images or other components within the text managed by the component

How to run mrp and capacity leveling through heuritics.

Hi,
How to run mrp and capacity leveling through heuritics.
What are the setps required for production planning run this thing in the heuritics in pp/ds?
Regards,
Sunil

Sunil,
APO PP/DS doesn't have a 1-to-1 match for MRP/Cap levelling per se. There are, though, a limitless number of ways to achieve the results you want.
Start with a basic PP planning MRP - SAP_PP_002, which will should create all necessary planned orders
Then try a DS heuristic to schedule your orders according to capacity. Schedule Sequence SAP001 is a good starting point. This can be used to schedule your cap relevant work centers such that they fully load the capacity available, similar to cap levelling.
Rgds,
DB49

Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parreral.

Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parreral.

hello - I have just moved your post to the Topic forums - you had posted your question in an obscure non-visible promotional community Hopefully our community users will see your question now.

Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parallel

Can cisco router support OSPF-TE and ISIS-TE same time for CSPF to compute a TE LSP? I may need to run both IGP in parallel.

Hi Johnny,
Per my understanding you can. It is equivalent to running 2 IGP and installing the entry in RIB table based on administrative distance.
-Nagendra

How to run QT and Photoshop at same time?

Similar Messages

Maybe you are looking for