How to run report from form using run_object_report
I AM USNING FORMS9I/REPORTS 9I , HOW TO RUN REPORT FROM FROM USING RUN_REPORT_OBJECT AND HOW
TO PASS PARAMETER AS WE DID IN RUN_REPORTS PLEASE HELP ME
here an example !
I hope this example you can use it
PROCEDURE pr_reporte IS
BEGIN
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status Varchar2(20);
d1 DATE;
d2 DATE;
BEGIN
d1 := :GLOBAL.DIA_INI;
d2 := :GLOBAL.DIA_FIN;
repid := find_report_object('rep_lab02');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'p_fec_uno='||to_char((add_months(last_day(d1),-1) +1),'DD/MM/YYYY')||' '||
'p_fec_dos='||to_char(d2,'DD/MM/YYYY'));
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := report_object_status(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' then
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
ELSE
ventana('E','error reporte no encontrado','S');
END IF;
END;
END;
The 'rep_lab02' is the name of the report that you give in the node reports
p_fec_uno and p_fec_dos they are the parameters in the report
repserver is the name of server created with rwserver
Greetings
Similar Messages
-
hi all,
i have tried to run report from forms using below codig(got from online help)
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
v_host varchar2(100):= 'localhost';
v_port varchar2(10);
v_parameter_string varchar2(4000);
v_username varchar2(50);
v_password varchar2(50);
v_database varchar2(50);
BEGIN
repid := find_report_object('REPORT27');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED' then
message('Report Completed');
copy_report_object_output(v_rep,'E:/Rep/local1.pdf');
-- host('MOZILLA E:/Rep/local.pdf');
-- WEB.SHOW_DOCUMENT('http://192.168.0.160:1521/reports/rwservlet/getjobid'||
-- substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
else
message('Error when running report.');
end if;
-- Get the full domain name of the server from the formsweb.cfg
tool_env.getvar('SERVER_URL',v_host);
-- Get the username/password and database from the .env file
tool_env.getvar('APPLICATION_USERNAME',v_username);
tool_env.getvar('APPLICATION_PASSWORD',v_password);
tool_env.getvar('APPLICATION_DATABASE',v_database);
-- If it is localhost then we are running on windows and need to use the windows port, otherwise we
-- are on AIX and need to use the AIX port
IF v_host = 'localhost' THEN
v_port := '8889';
ELSE
v_port := '8889';
END IF;
-- Now build the parameter string for running the report
v_parameter_string := 'server=repserver';
v_parameter_string := v_parameter_string||'&report= E:\AGE_NoELIGIBLEReport.rdf';
v_parameter_string := v_parameter_string||'&userid='||v_username||'/'||v_password||'@'||v_database;
v_parameter_string := v_parameter_string||'&execution_mode=batch';
v_parameter_string := v_parameter_string||'&comm_mode=synchronous';
v_parameter_string := v_parameter_string||'&destype=cache';
v_parameter_string := v_parameter_string||'&desformat=pdf';
-- Now run the report
web.show_document('http://'||v_host||':'||v_port||'/reports/rwservlet?'||v_parameter_string,'_blank');
END;
REP-110: Unable to open file ' AGE_NoELIGIBLEReport.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file ' AGE_NoELIGIBLEReport.rdf'.
but i hav report in e:\ then why its getting?Hi,
I suggest you not to use the "E:\" directory letter, but the REPORTS_PATH instead.
<p>
from the Online Help
</p>
<p>
On Windows, edit environment variables through the Registry Editor (Start > Run > Regedit).
</p>
<p>
On UNIX, edit environment variables by revising and running the shell script that defines the initial default values (reports.sh). If you do this, be sure to keep a backup of the original, unaltered reports.sh file.
</p>
<p>
Regards
JeanYves
</p> -
I've interview tomorrow , still do not know how to run report from forms
hi all ,
i asked before about running report from forms 10g rel2 , but vainly , because i could not configure the reports server ,
and no one told me .
now i've an interview tomorrow , and sure it will be included in the task which i have to do .
i am in a bad need for your step by step help
thanks in advanceExcuse me for being lazy and not searching your previous threads containing questions about configuring your reports server. As I don't know their content I don't know the links posted, the advices given and what you did, and as this is a new thread I'll go ahead and ask what you tried, where you failed and what exactly did not work out for you.
i am in a bad need for your step by step help Fine, here is an easy one:
Step 1: go to http://tahiti.oracle.com
Step 2: click on "Oracle Application Server, 10g Release 2 (10.1.2)"
Step 3: click in the searchbox, type "Configuring Reports Server"
Step 4: click "search"
Step 5: You will be redirected to some links, the very fist of them is this:http://docs.oracle.com/cd/B14099_19/bi.1012/b14048/pbr_conf.htm
This is as step-by-step as it gets, if you want detailed help ask detailed questions.
cheers -
How to run report from forms 6i
i want to run report from forms 6i.
can anyone help me in this regard.
asif iqbal
karachi.hi
try something like this.
parameter_list_id := CREATE_PARAMETER_LIST('temp_data');
mywhere:='where 1=1';
if :RESULT_VALUE is not null then
mywhere:=mywhere || ' and diagnosis like ''%'||:RESULT_VALUE||'%''';
end if;
if :HISTORY is not null then
mywhere:=mywhere || ' and histodesc like ''%'||:HISTORY||'%''';
end if;
if :RCOMMENTS is not null then
mywhere:=mywhere || ' and scomments like ''%'||:RCOMMENTS||'%''';
end if;
if :PATHOLOGIST is not null then
mywhere:=mywhere || ' and PATHOLOGISTS like ''%'||:PATHOLOGIST||'%''';
end if;
mywhere:=TRANSLATE(mywhere,' ','~');
ADD_PARAMETER(parameter_list_id,'MYWHERE',TEXT_PARAMETER,mywhere);
RUN_PRODUCT(REPORTS,'C:\SearchResult.RDF',SYNCHRONOUS,RUNTIME,FILESYSTEM,parameter_list_id,NULL);
ADD_PARAMETER(parameter_list_id,'PARAMFORM',TEXT_PARAMETER,'NO');
DESTROY_PARAMETER_LIST(parameter_list_id);and also u can try the following code please modify it with u r requirements.
declare
v_plist_id paramlist;
pl_name varchar2(50) := 'rep_params';
begin
v_plist_id := get_parameter_list(pl_name);
check_param_list (pl_name); --Check availability of paramlist and
destroy is present
--When the parameter list already exists it needs to be distroyed first
if not id_null(v_plist_id) then
destroy_parameter_list(v_plist_id);
end if;
v_plist_id := create_parameter_list(pl_name);
add_parameter(v_plist_id, 'P_1', text_parameter, :block_name.item);
-- input parameter
add_parameter(v_plist_id, 'PARAMFORM', text_parameter, 'NO'); --
suppress the display of the Reports p-form
add_parameter(v_plist_id, 'DESTYPE', text_parameter,
:control.dest_type); -- set file destination type
add_parameter(v_plist_id, 'DESNAME', text_parameter,
:control.dest_name); -- set file destination name
add_parameter(v_plist_id, 'DESFORMAT', text_parameter,
:control.dest_format); -- set file destination format
-- call reports
run_product(reports, 'reports_file', asynchronous, runtime,
filesystem, v_plist_id, null);
end;sarah -
Urgent: how to run report from forms runtime
hi
can anybody tell me how to call reports in forms through menu
i just forgot how to call...
exact menu item code!!
rgds,Dear
if u are using client server then use this code
Run_Product(REPORTS, 'd:\emp.rep', ASYNCHRONOUS, RUNTIME,
FILESYSTEM, 'x', NULL);
if u r wsing web then use this code
Web.Show_Document('/reports/rwservlet?server=myrepserv&report=test.rdf&userid=scott/tiger@mydb&desformat=pdf&destype=c
ache¶mform=yes', '_blank');
M Rizwan -
How to run report from form in DS9I
Hi,
Can anybody guide me how to run the webreport from the form by passing some parameter from form to report
by using Oracle developer 9i
thanksTry
http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
You'll find there all what you need -
How to run report from form 10g
Dear All,
I have code of forms 6i that i used to run report. but when i run this code through forms 10g this gives message that use RUN_REPORT_OBJECT instead.
please convert my code to 10g .
==============================================
pl_id:=Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List(pl_id);
END IF;
pl_id:=Create_Parameter_List('tmpdata');
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
Add_Parameter(pl_id, 'P_FROM', TEXT_PARAMETER,:FROM);
Add_Parameter(pl_id, 'P_TO', TEXT_PARAMETER, :TO);
Run_Product(REPORTS,'ANNEX_B_CONSTRUCTION_QUALITY',SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id);
=======================================================
Many thanksSome sample code. Create REPORT1 under Report node of the form.
DECLARE
PL_ID ParamList;
v_rep_id REPORT_OBJECT;
v_rep VARCHAR2(200);
v_rep_file VARCHAR2(100); --Added to change create a unique file each time report created.
v_tmp_path varchar2(250);
BEGIN
v_rep_id := FIND_REPORT_OBJECT('REPORT1');
v_rep_file:=USER||'_'||to_char(SYSDATE,'DDMMYYYY_HH24MISS');
pl_id:=Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List(pl_id);
END IF;
pl_id:=Create_Parameter_List('tmpdata');
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
Add_Parameter(pl_id, 'P_FROM', TEXT_PARAMETER,:FROM);
Add_Parameter(pl_id, 'P_TO', TEXT_PARAMETER, :TO);
--Run_Product(REPORTS,'ANNEX_B_CONSTRUCTION_QUALITY',SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id);
SET_REPORT_OBJECT_PROPERTY(v_rep_id,REPORT_FILENAME, 'tested_part_report'||'.rdf');
SET_REPORT_OBJECT_PROPERTY(v_rep_id,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(v_rep_id,REPORT_DESFORMAT,'pdf');
SET_REPORT_OBJECT_PROPERTY(v_rep_id,REPORT_DESNAME,v_tmp_path||v_rep_file||'_Tested_Part_Report.pdf');
v_rep := RUN_REPORT_OBJECT(v_rep_id,PL_ID);
--You should have a virtual path set as /output/ in Application server
--Show the pdf output create in the folder mapped to output
Web.Show_Document('/output/'||v_rep_file||'_Tested_Part_Report.pdf','_blank');
END;You need to put the files in the path (As set in the registry of application server) . Needed application server knowledge to deploy the reports.
Edited by: Lokanath Giri on २२ दिसंबर, २०११ ११:०३ पूर्वाह्न
Edited by: Lokanath Giri on २२ दिसंबर, २०११ ११:५९ पूर्वाह्न -
Unable to run reports from forms using run_report_object
Hi All,
I am unable to run a report(9i) from forms(9i) in client side.
I used the following code
Declare
repid REPORT_OBJECT;
v_rep varchar2(100);
rep_status varchar2(20);
Begin
repid := FIND_REPORT_OBJECT('report4');
v_rep := RUN_REPORT_OBJECT(repid);
End;
I get the following error
FRM-41219 : Cannot find report:invalid ID.
Any help will be highly appreciated.
Thanks,
SanjayHi All,
I am unable to run a report(9i) from forms(9i) in client side.
I used the following code
Declare
repid REPORT_OBJECT;
v_rep varchar2(100);
rep_status varchar2(20);
Begin
repid := FIND_REPORT_OBJECT('report4');
v_rep := RUN_REPORT_OBJECT(repid);
End;
I get the following error
FRM-41219 : Cannot find report:invalid ID.
Any help will be highly appreciated.
Thanks,
Sanjay Hi
You have to create a report object within the form.
If you look at the Object NAvigator in the Form Builder right below Record Group
tou would see an option for Report. Create a new report object.
Set the following properties for that object
Filename - This should be the name of your RDF file you created from Report Builder along with the full path.
Set the Execution Mode, Communication Mode and Report Destination Type as per your requirements.
In the parameter for find_report_object() pass the name of the report object you created.
eg.
if the name of the report object you created is Report2 then
your call should be rep_id := find_report_object('Report2') .
You are calling the report object which has been created in your form builder and through that call you are running the report file specified in the Filename property of that report object.
Regards
Poorvi -
Running reports from forms on the web
On forms and reports 6i we used the following code to run reports from forms.
We need to do the same on 9i forms and reports, we are running into problems.
Any help will be appreciated.
PROCEDURE web (inFileName VARCHAR2,
inRecordGroup RECORDGROUP) IS
outVirtualPath VARCHAR2(200) := '/forms90/f90servlet?p_url=/reports/rwservlet?'; outServer VARCHAR2(200) := 'server=rep_ora-app-4';
outReport VARCHAR2(200) := 'report='||inFileName;
outUserid VARCHAR2(200) :=
'userid='||GET_APPLICATION_PROPERTY(USERNAME)||'/'||GET_APPLICATION_PROPERTY(PAS
SWORD)||'@'||GET_APPLICATION_PROPERTY(CONNECT_STRING);
outDesType VARCHAR2(200) := 'DESTYPE=CACHE';
outDesFormat VARCHAR2(200) := 'DESFORMAT=PDF'; outUser VARCHAR2(2000);
outCount INTEGER;
error we are getting.
FRM-42017:Module name must be specified.S Hatch (guest) wrote:
: I'm thinking that you're going to have to install the Reports
: cartridge, create an entry in the keymap with any parameters
and
: call your report via the url.
: Dessislava Gantcheva (guest) wrote:
: : How do I call a report from a form on the web?
: : I have installed Windows NT Server 4.0 with SP 5, OAS4.0.7
EE
: : with patch 1, Developer 6.0 with patch 1. Developer server
and
: : forms server work fine in a non-cartridge implementation,
but
: I
: : cannot run a report within a form. I just have no any info
how
: : to do this.
I have entries in my keymap file and I can call my reports via
the url, but I cannot run a report WITHIN a form. I mean to call
a report by clicking on a button of a form on the web. The
RUN_PRODUCT built-in does not work (at leas it seems like this)
If any one has expiriense with it, please, give me a hint.
Thanks
null -
When run report from form(6i) on the web,error FRM-921000
While I was trying to run report from form (6i)on the web,it will give me this error
message FRM-921000 and hang.
But when I try to call form using form,I do
not have the problem.
May I know ehat is the cause?
Anybody encounter this before?
Thanks
nullI am running Forms 6i on the web and attempting to call me report via RUN_REPORT_OBJECT. I am getting the same error as Jenny FRM-92100. I need to pass a parameter list so I don't think I can use WEB.SHOW_DOCUMENT. Any ideas???
Thanks,
Jenny N.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Joseph Schwertner ([email protected]):
Dear Jenny,
I am running reports from Forms 6i on the WEB. I did not encounter your problem. Nevertheless I would like to share the following with you.
RUN_PRODUCT doesn't work for calling reports ON THE WEB. Instead using RUN_PRODUCT do the following:
1. Install Oracle Reports Server
2. For WEB calls of reports use WEB.SHOW_DOCUMENT
3. Learn how to pass parameters to the reports. It is a litlle bit strange, but it is explaint excellent in the documentation to the Reports Server.
I hope this will help you.
Joseph Schwertner
<HR></BLOCKQUOTE>
null -
hi,
I am having problems in running report from form.
I am using oracle 9i on windows 2000 server and no 9iAS at the moment. On client side, i have windows xp and 9iDS installed. I want to run report from forms in 9iDS testing environment.
my forms are running ok but now i need to run report. so what i have done is that i have created a report object in form and following are enteries present in it at the moment.
Name REPORT7
FileName D:\Projects\IBMR\forms\soil_water_quality_data.rdf
Execution Mode Batch
Communication Mode Synchronous
Destination Type Cache
Report Server 9irep
and in when_button_pressed trigger
DECLARE
Report_Id REPORT_OBJECT;
Report_Job_Id VARCHAR2(20);
Report_Status VARCHAR2(80);
Report_Svr VARCHAR2(20);
BEGIN
Report_Id := FIND_REPORT_OBJECT('REPORT7');
Report_Svr := '9irep';
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_FILENAME, '\projects\ibmr\forms\soil_water_quality_data.rdf');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_OTHER, 'paramform=no');
Report_Job_Id := RUN_REPORT_OBJECT(Report_Id);
Report_Status := REPORT_OBJECT_STATUS(Report_Job_Id);
WHILE Report_Status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
Report_Status := REPORT_OBJECT_STATUS(Report_Job_Id);
END LOOP;
IF Report_Status = 'FINISHED' then
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(Report_job_id,instr(Report_Job_Id,'_',-1)+1)||'?'||'server=9irep','_blank');
else
message ('report server failed with error message '||report_status);
END IF;
END;
i have installed report server with following command
rwserver -install 9irep
i have changed entry in rwservlet.properties like
SINGLESIGNON=NO and i have removed the following entire block of 9irep.conf, which i have read from some documentation
<!--security id="rwSec" class="oracle.reports.server.RWSecurity">
<property name="securityUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
</security-->
i get the following error message when i run my form
frm-41214 Unable to run report
and then next message is
frm-41217 unable to get report job status
i debugged the report id and it is
9irep_0
returned by Report_Job_Id := RUN_REPORT_OBJECT(Report_Id);
When I checked the Report Queue Manager
it is showing status like
(9irep)Terminated with error
and detail it shows is
Unable to connect to the specified database.
Now I am wondering what to do next.
any suggestions???????Hello,
From your description, it seems like the report is faling due to a database authentication problem. When you run your report from Forms, Forms internally passes the its database connection information to Reports automatically. So ensure that you are connected to a valid database in Forms, before the report is called.
Please verify whether a simple report which does not require a database connection, for example, a report containing only a boilerplate text object, is running correctly. Also, in the trigger code that you have specified, you should add the following:
SET_REPORT_OBJECT_PROPERTY(Report_Id, REPORT_DESTYPE, CACHE);
so that the report output gets generated to the server cache, and can be retrieved using rwservlet/getjobid.
Thanks,
The Oracle Reports Team. -
I want to run report from FORM
I want to run report from FORM. The report will save in PDF format then OPEN automatically in PDF
Every PDF file should have a unique file name.
I am using Form 6i and Reports 6iDECLARE
vParamList PARAMLIST;
BEGIN
vParamList:=GET_PARAMETER_LIST('MyRep');
IF NOT ID_NULL(vParamList) THEN
DESTROY_PARAMETER_LIST(vParamList);
END IF;
vParamList:=CREATE_PARAMETER_LIST('MyRep');
SET_REPORT_OBJECT_PROPERTY('report_path\emp_rep_def',REPORT_DESFORMAT,'PDF');
RUN_PRODUCT(REPORTS,'report_path\emp_rep_def',ASYNCHRONOUS,RUNTIME,FILESYSTEM,vParamList,NULL);
END; -
OAS in Unix: URL not found when run report from Form???? please help
Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
nullplease check env. variables
1. FORMS60_MAPPING
2. FORMS60_OUTOUT
FORMS60_MAPPING should point to vartual directory on your forms webserver
FORMS60_OUTPUT should point to physical
directory path of vartual directory
FORMS60_MAPPING
regards
Darshan
[email protected]
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by leong([email protected]):
Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
<HR></BLOCKQUOTE>
null -
hi all,
I am working in oracle forms 6i and i am trying to run report from
form while press one of the push-button. works fine upto 2nd line from the
begin key-word.After that its showing error like " FRM-40738:Argument 1 to builtin
REPORT_OBJECT_STATUS cannot be null.". Can any-one help me of how to solve this and
wat would be the problem.........?
declare
run_rep varchar2(200);
rep_obj report_object;
rep_stat varchar2(20);
begin
rep_obj := find_report_object('report46');
run_rep := run_report_object(rep_obj);
rep_stat := report_object_status(run_rep);
if rep_stat = 'FINISHED' then
copy_report_object_output(run_rep, 'C:\Documents and Settings\trainee\Desktop\Icons\test.pdf');
else
message('error when running report');
end if;
end;
Please help asup!
regards,
jamehi rosario,
Thanks for ur reply. My requirement is, I want to generate pdf file from the report output. so i wrote the following code which is taken from d2k documentation. Problem area has been highlighted in bold.
declare
run_rep varchar2(200);
rep_obj report_object;
rep_stat varchar2(20);
begin
rep_obj := find_report_object('report46');
run_rep := run_report_object(rep_obj);
rep_stat := report_object_status(run_rep);
if rep_stat = 'FINISHED' then
copy_report_object_output(run_rep, 'C:\Documents and Settings\trainee\Desktop\Icons\test.pdf');
else
message('error when running report');
end if;
end;
Report is running but while coming to report_object_status. complior shows error like "FRM-40738:Argument 1 to builtin REPORT_OBJECT_STATUS cannot be null". Parameter for report_object_status is null, i dont know y it is null because report is running. If report is running means,then there must be some values in run_rep.
why complior doesnt find the values from run_rep.......???
regards,
jame -
Oracle 10g Developer suite
using OC4J
hi experts
can you please share some code here to run report from form with and without passing parameters.
regardsTry This
Declare
v_connect VARCHAR2 (200) := 'userid=nisadmin/nisadmin@abc';
v_report_name VARCHAR2(100) := 'Voucher.rdf';
v_format VARCHAR2(12) :='Htmlcss';
Begin
Web.Show_Document('http://hoitvoltes5:9002/reports/rwservlet?'||v_connect||'&server=ReportsServer_HOITVOLTES5_asin&destype=cache&report='||v_report_name||'&desformat='||v_format||'&companyid='||:voucher.companyid||'&vouno='||:voucher.vouno,'_blank');
End;
Maybe you are looking for
-
NOKIA C5-03 Internet connectivity Problem..
I Have Nokia C5-03 bought before 4 months. I use BSNL Prepaid card, 3G/EDGE enabled. I am facing problem of not being able to connect to internet via 2G/3G reliably. whenever I try to connect to internet, 7 out of 10 times it gives me message" "conne
-
Error while calling the BPEL from java program
Hello All, I am tring to call the Synchronous BPEL process from the following code: package callbpelfromjava; import com.oracle.bpel.client.Locator; import com.oracle.bpel.client.NormalizedMessage; import com.oracle.bpel.client.delivery.IDeliveryServ
-
Dynamic table name, how to query?
Hi! There is a table name that is decided dynamically. the name is: someNameYYY where YYY denotes the client number. I get the client number by sy-mandt and concatenate it with someNameYYY to lc_table_name but then comes the problem: I cannot do SELE
-
Using fonts when launching from JNLP
Hello, I followed the directions in this link http://fxexperience.com/2010/05/how-to-embed-fonts/ and was able to add and use fonts in my javafx program when launched from Netbeans. But when I try to launch from JNLP, the fonts do not show up (the te
-
I created an alv grid in my web dynpro... Everything worked fine ! Then I needed to add a column to the alv grid... SO 1 - Chnaged the structure un SE11 2 - Update component controller context so that the field is displayed 3 - Update all bindings 4