How to Run the NEW "System Info Command" in Tiger ?????

I am new to Applescript and was wondering if someone could help me on how to run the new "System Info Command"?
Thanks!!!

The "system info" command that red_menace uses above is the new system info command that's mentioned on the web page you referenced. However, red's example only displays the "long user name" and the "AppleScript version" in the dialog.
The entire system info record actually contains all of these items, each of which you can access just like red_menace shows you in his example:
AppleScript version
AppleScript Studio version
system version
short user name
long user name
user ID
user locale
home directory
boot volume
computer name
host name
IPv4 address
primary Ethernet address
CPU type
CPU speed
physical memory
Steve
PS - if you switch Script Editor over so the bottom pane displays the "Event Log" you'll see the entire system info record displayed in the log when you run red_menace's script.

Similar Messages

  • Is there a tutorial on how to run the new IMovie version 10?

    Can someone direct me to video tutorials on how to operate the new IMovie inside Maverick.  As has been the case recently with Apple, this update isn't necessarily user driven.  Help please.

    There's some info in iMove->Help:

  • How to run the set-up program with a brand new X200?

    I bought a brand new X200 from TigerDirect. As their guidance of shipping, I tested it within very short time. When I turned on the machine, a program was automatically run to have me to make some necessary configuration roughly ASAP so that the shipping boy could get my receipt. Now I wanna run it again to refine the configuration but found out that I don't know how to manually run it again.  Another confusion is I didn't find the recovery disc in the box. Why? Do you think there's some problems? And more, even I got the disc, after I upgraded the OS from Vista Business to Windows 7, if the the disc would be available for the new system? Or I have to order a new one for Windows 7?

    If I'm reading your note correctly, you had to open the package and boot in the presence of the delivery driver to generate a document before the driver could leave.
    If that is the case, this isn't a Lenovo function and unlikely to be restored by any Lenovo Repair / Recovery.
    Tiger Direct is your resource to restore the system to that point in time.
    A good tip, every new computer should be imaged as a slave drive or with a proven boot stick / boot CD and archived before powered into the included MBR and OS,  archive the image to a DVD and another DVD or reliable source and youll always have a pristineimage of your laptop at "zero day"
    Those images are helpful at resale and often coveted by buyers of used gear in the Thinkpad community.
    Don't just sit there, take a second and use the Kudo's button to compliment the people who help you.

  • How to run the JNLP from Command Line

    Hi All,
    how to run the JNLP file from the remote machine from our command line. I have requirement to run this JNLP file in java 1.4.2 version. Can any one tell me the procedure or the steps that are needed to run this file at command prompt.
    Regards,
    Prasanna.
    Edited by: VPrasanna on May 19, 2008 4:43 AM

    >
    I am getting "**java.security.AccessControlException: access denied (java.net.SocketPermission wwwgate0.mot.com:1080 connect,resolve)**" when I start the Web Start Client. >This seems like a largely separate problem to running the JNLP from the command line. It might have been better to end this thread (assign the dukes) and start a new one.
    >
    ..Can you help me in resolving this issue. >However, I suspect I can guess the problem.
    If this app. is normally hosted on wwwgate0.mot.com then it can 'phone home' to the server without further permission, but if you are running it from the command line, that might not be the codebase anymore.
    If you wish to do 'local testing' of such an app., I would recommend setting up a server like Tomcat on the local machine, and serving the test app. directly off that.
    >
    ..Its urgent...>Sun offers a number of options for urgent matters, such as support tickets. Perhaps you should look into one of those.

  • Running the net or sc commands with the rights of the local System

    Hi
    In Windows 7 SP1, how do I run the net or sc commands with the rights of the local System?
    Thanks
    Bye
    Balubeto

    Hi,
    I agree with
    T. Kujala , it's easy to achieve this goal with PsExec.exe, the tool is easy to download and use.
    http://blogs.technet.com/b/askds/archive/2008/10/22/getting-a-cmd-prompt-as-system-in-windows-vista-and-windows-server-2008.aspx
    If you don't want to use external utilities, then this link below might give you some hints
    http://blogs.msdn.com/b/adioltean/archive/2004/11/27/271063.aspx
    Yolanda Zhu
    TechNet Community Support

  • I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. going again?

    I just upgraded my older G5 from tiger to leopard and it is now at 10.5.8, I was unaware that the new system did not support the classic envoirnment and cannot access my 6.0 version of Photoshop, which I use often...how do I get P.S. up and going again?

    Niel...
    I installed Leopard 10.5.6 and then it upgraded to 10.5.8, when I installed it I had the old info saved to a "previous systems" folder, where most of my artwork, etc. were saved, I have a one terabyte Lacie backup that unfortunately did not work as it was intended...it saved the new info and not the old. I did look into the system preferences folder and found the classic file, of course it wouldn't launch...but I have the old G 5 startup discs and will try to do it as you stated. I will try also to move it out of the previous folders file to my hard drive and see how that works.
    thank you for your time and help,
    Dennis

  • How can I migrate my old sync data to the new system when I don't have any devices signed in

    I just reformatted my computer harddrive and reinstalled both Windows and Linux. Now that I have everything installed and updated, Firefox is asking me to migrate to the new syncing system they have. Problem is, I want to still be able to sign into the old system just to be able to get my bookmarks so I can migrate them to the new system.
    I still have my sync key, and login information for the old system, but I just want to know how to access it once to get my information. I can handle everything from there.

    hello, in this case you'd probably have to use a workaround and download the prior firefox version, disable automatic updating for the moment (in options > advanced > update), link it to the old sync account and upgrade after you have successfully restored your data this way...
    [[Install an older version of Firefox]]

  • HT1208 Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

    Where do I find a tutorial about how to use the new iTunes? I have version 11.1.3 (8). I looked on the Apple web site but only found info extolling the virtues of iTunes, not how to use it.

    Use it the same way as previously.
    ctrl B shows the menus.
    ctrl S shows the sidebar.
    What else do you need help with?

  • I did a system upgrade (clean install) to Snow Leopard. I now have lost all of my Firefox bookmarks. Should they be somewhere in my backup files (on an external drive)? How do I locate them? And, how do I restore them to Firefox in the new system?

    Where would the Bookmarks be filed in my system backup? Can I move them to the new system (Internal drive)?

    Hi drnels,
    Are you saying you still have access to the backup? If you do, you should take a look at [[Backing up your information]]. It will show you where all of your personal information is stored in Firefox and how you can copy it to a new install.
    Hopefully this helps!

  • My motherboard went out and I got a new computer and I need to deactivate Pro X from the old system and activate it on the new system.  How is this done?

    My motherboard went out and I got a new computer and I need to deactivate Pro X from the old system and activate it on the new system.  How is this done?

    Hi David ,
    If it is a retail version ,then you need to deactivate it and uninstall it as well from your old computer and then you can install it back on the new computer.
    If it a subscription based software ,then you just need to deactivate it and you can operate the same on your new computer by entering in your credentials .
    For more information ,you can refer to this link.
    https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    Regards
    Sukrit Dhingra

  • Key Chain - how to get my old passwords on the new system after clean inst.

    Hello,
    just switched to Tiger and took the opportunity to make a clean install, to get rid of my classic partition.
    Before I made a copy of the harddrive data with "Superduper". I managed to get back after installing almost all my preferences, mail accounts, etc., but I don´t know where I can find the Key chains from the old system (copied already the files from Library and User/Library to the new system, but it won´t work..
    Please help!!
    thankz Denz-al

    Welcome to Apple Discussions!
    I assume you clone restored your data back again from the external hard drive. If that's what you did, a more reliable method is simply to erase and install Tiger, and then use the Migration Assistant to import the data from the external hard drive over Firewire.
    http://docs.info.apple.com/article.html?artnum=25773
    But since you've done what you have, you may still be able to import the old keychain:
    http://docs.info.apple.com/article.html?artnum=25708

  • I want to make a new computer my "home" computer for itunes. How do I make it the new "system administrator" for home sharing?

    I want to make a new computer my home computer for my itunes library. How do I make it the new 'system administrator' for home sharing?

    Yes, on the right side of the U.K. Apple Store homepage there will be an "Education Store." You can get something like 10% off, it seems.

  • How do I play music on the new system?

    I just downloaded the new system for iPhone 4. First time I tried to play my songs on iTunes it started scanning titles, that's all. I can't get it to play. What's going on? These are songs synched from my MacBook Pro, some I wrote and recorded and others. The only one I can get it to play is one I downloaded from iTunes.
    Tom in Texas

    Could you go a little slower? Use smaller words?
    Think I figured it out. iTunes seems to download the music...or something like that...the first time it's used. Had to cycle through all of them before it would play. Playing fine now.
    Tnx...
    TnT

  • HT4623 I just upgrade to the new system and I can not see or use itunes on my iPone 5 or iPad. How do I fix this?

    I Just upgrades to the new system and can not see or use itunes on my iPhone or iPad, please help?

    Easy,
    Restart your PC, then restart your iPhone/iPad. Then once your computer reboots, connect the devices using the USB cable.
    Let me know!
    C

  • How to run the programes in NetBeans

    any body know how to run the java progarm in NetBeans.
    can u please guide me?
    Advance in thanks

    thanks for ur reply.
    this is my code.
    public class sample11 {
    /** Creates a new instance of sample11 */
    public sample11() {
    public static void main(String args[])
    System.out.println("nithya");
    i did watever u told. but i don't have o/p. wat can i do? how to it display the o/p?

Maybe you are looking for