How to run two or more reports in parallel?
Hi,
Scenario:
I have created three report programs. After the first report is processed, I prepare a selection parameter based on the result and call the other two programs simultaneously by using the SUBMIT command.
Issue:
As the other two programs are completely independent, I want the these to run in parallel and return the result set.
Can anybody suggest how do I achieve this?
Regards
s@k
Dear Radhika,
Thanks..:)
To add to the problem, after the first program is processed and I get the result, I prepare a selection parameter table. This
table I pass to the other two programs as shown:
Program 2:
SUBMIT <program_name> AND RETURN
USER sy-uname
WITH SELECTION-TABLE lt_params_1.
Program 3:
SUBMIT <program_name> AND RETURN
USER sy-uname
WITH SELECTION-TABLE lt_params_2.
As suggested by you, I have checked for the job options. I found that i need to call the function modules in the order as
1. JOB_OPEN
2. JOB_SUBMIT
3. JOB_CLOSE
The question is how do i pass the selection parameter table in the FM JOB_SUBMIT? I can see there is a report parameter but how do I pass the table to it
Can you please suggest.
Regards
s@k
Edited by: siemens.a.k on Feb 4, 2010 4:03 PM
Similar Messages
-
How to run two files with same url- urgent
hi,
i created two servlet page and both are working very fine.but at same time i only able to run one file with same url. Is possible to run two or more file at same time with same url name..
if you r not understanding what i want to ask then, i have two file names under helloWeb directory
1) helloWorld.java(servletname s1, url /man)
2) helloWeb.java (servletname s2,url /man)
to run - http://localhost:7001/helloWeb/man - it runs very first file which is added to deployment module.
so i want to know how i can run both file with same url, for this what i have to pass on my address bar.
plz help me i m wating
<b></b>Hi,
We can give same url mapping to both Servlets but we can access the servlet which is entered first in web.xml because whenever we send a request to the webserver then webserver look at the elements in web.xml file one by one.
When it finds the corresponding url mapping then immediately sends the response to the client.The same url mapping for the next element will be ignored.
I think there is no possibility to access both servlets with same url.
Regards
Anilkumar kari -
How to run two query in the same preparedStatement
Hi all,
Please tell me how to run two queries in the same preparedStatement object ?
In my module I have to run two queries and I don't want to make two methods for running two different queries.
I just want to call this method for both of my queries.
methodName(long param)
Connection conn=null;
PreparedStatement pstmt=null;
//////////////// some coding
Please Help !
Thanks in advance
amitindiapublic void foo()
Connection connection = null;
PreparedStatement stmt = null;
try {
connection = ...get from pool...;
stmt = connection.prepareStatement("...");
...fetch results...;
stmt.close();
stmt = null; // So the finally statement works if there is an exception
stmt = connection.prepareStatement("...");
...fetch results...;
} finally {
if (stmt != null) ..close it...;
if (connection != null) ..return it to pool...;
} -
I just got my passport yesterday ,could someone teach me how to run my passport more than one day.
please see the picture, I just received some calls and surf the internet less than 1h today.
thank you a lot.press both volume keys down for 30 seconds and see if it persists after
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V -
How to run two versions of dreamweaver at the same time
How to run two versions of any dreamweaver at the same time?
There must be a way to do this.east99 wrote:
> How to run two versions of any dreamweaver at the same
time?
> There must be a way to do this.
Yes, there is: on two separate computers.
You cannot run two versions of Dreamweaver simultaneously on
the same
computer. They can coexist side by side, but the operating
system will
not let you run them together.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/ -
Can you run two separate vi's in parallel
Can you run two seperate Vi's in parallel? Will this make response considerably slower?
Solved!
Go to Solution.eugeniap wrote:
Hi, what more detail is needed? They are two entirely seperate independent vi's with no shared sub vis.
I just wanted to know if you can run two independent vi's at the same time, as in just have two seperate programs and run them.
Separate isn't the same as independent. That's why they wanted more information.
Your second question asked about slowed response. That's another place you didn't offer anywhere near enough information for a true answer. How many loops are you running in each of these independent VIs? How many cores does your processor have? Are you including a 0ms wait in your loops to avoid railing your processor?
It's possible you'll see such a negligible change in processing that you won't notice. It's also possible you'll feel like you're draining your system. It's generally best to err on the side of too many details rather than too few when you're asking questions. If you don't know the answer, you likely don't know how each piece plays a part in the answer. More information allows others to pick out the relevant pieces and give you a better answer. -
how to run 3 job(a,b,c) parallel in unix shells script and after will complete d will start and we have to handle the error also
032ee1bf-8007-4d76-930e-f77ec0dc7e54 wrote:
how to run 3 job(a,b,c) parallel in unix shells script and after will complete d will start and we have to handle the error also
Please don't overwhelm us with so many details!
Just off the top of my head ... as a general approach ... something like
nohup proca
nohup procb
nohup procc
while (some condition checking that all three procs are still running ... maybe a ps -ef |grep )
do
sleep 2
done
procd
But, we'd really need to know what it is you are really trying to accomplish, instead of your pre-conceived solution. -
FEBA - How to post two or more transactions at the same time?
Hi,
one of our banks sends the statemets with many lines that belongs to the same transaction. We have to post partially one line, and afterwards the other line. Any of you know how to post two lines at the same time from the bank statement?
Thank you in advance,
MiguelHi,
I'm sorry for replying so late.
The solution I reached was to change the a few things in the standard.
Now I have a new "context menu item". I select two or more transactions and I right-click the mouse. I select that "context menu item" and the next part of the code adds the total amount of the transactions to look for the correct post for the first transaction. Once posted automatically, the next transaction is posted automatically by the system.
I hope you understand my English. I've problem with technical FI terms.
Here you are the code:
First I added a new contextual menu item:
CL_FEBAN_ALV_GRID=============CCIMP
call method e_object->add_function
EXPORTING
fcode = 'BS_POST_ITEMS'
text = text-002.
*{ INSERT DHTK904078 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
call method e_object->add_function
EXPORTING
fcode = 'ZBS_POST_ITEMS'
text = text-Z02.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
call method e_object->add_function
EXPORTING
fcode = 'BS_KILL_ADVICE'
text = text-004.
CL_FEBAN_ALV_GRID=============CCIMP
when 'BS_POST_ITEMS'.
call method cl_feban_propagator=>raise_event
EXPORTING
i_event = 'POST_ITEMS'
i_ref_to_item = l_ref_to_item.
*{ INSERT DHTK904078 2
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
when 'ZBS_POST_ITEMS'.
call method cl_feban_propagator=>raise_event
EXPORTING
i_event = 'ZPOST_ITEMS'
i_ref_to_item = l_ref_to_item.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
when 'BS_LOCK_ITEMS'.
call method cl_feban_propagator=>raise_event
EXPORTING
i_event = 'LOCK_ITEMS'
i_ref_to_item = l_ref_to_item.
CL_FEBAN_PROPAGATOR===========CM001
when 'POST_ITEMS'.
raise event post_items
exporting i_ref_to_item = i_ref_to_item.
*{ INSERT DHTK904078 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
when 'ZPOST_ITEMS'.
data: zvalor(1) value '' .
export zvalor from 'X' to memory ID 'ZFEBA01'.
raise event post_items
exporting i_ref_to_item = i_ref_to_item.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
when 'LOCK_ITEMS'.
raise event lock_items
exporting i_ref_to_item = i_ref_to_item.
Now, I proceed to calculate the total amount of the selected transactions to look for the correct one to post.
LNEW_FEBAF01
* user parameter
l_feban_position type c.
field-symbols: <items> type item_tab_type.
*{ INSERT DHTK904077 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
data: zvalor(1) value '',
zkwbtr type kwbtr,
kwb type kwbtr.
import zvalor to zvalor from memory ID 'ZFEBA01'.
if ( zvalor is not initial ).
if not i_ref_to_item is initial.
assign i_ref_to_item->* to <items>.
loop at <items> into h_item.
select single kwbtr
into kwb
from febep
where kukey = h_item-kukey and
esnum = h_item-esnum.
zkwbtr = zkwbtr + kwb.
endloop.
endif.
export zkwbtr from zkwbtr to memory ID 'ZKWBTR'.
endif.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
refresh g_picked_items.
if not i_ref_to_item is initial.
assign i_ref_to_item->* to <items>.
loop at <items> into h_item.
move-corresponding h_item to h_picked_items.
append h_picked_items to g_picked_items.
endloop.
endif.
submit rfebbu00 and return
user sy-uname
with anwnd = r_doc->*-anwnd
with s_kukey in s_kukey
with s_esnum in s_esnum
with buber = g_posting_area
with mregel = '1'
with function = 'C'
with mode = g_mode
with p_bupro = g_bupro.
*{ INSERT DHTK904077 2
*--> Miguel Estu00E9vez - 17/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
if ( zkwbtr is not initial ).
select single kwbtr
into kwb
from febep
where kukey = h_kukey-low and
esnum = h_esnum-low.
zkwbtr = zkwbtr - kwb.
export zkwbtr from zkwbtr to memory ID 'ZKWBTR'.
endif.
*<-- Miguel Estu00E9vez - 17/06/2008
*} INSERT
refresh s_kukey.
refresh s_esnum.
clear h_kukey.
clear h_esnum.
endloop. "loop over all picked items
call function 'CUSTOMIZED_MESSAGE'
EXPORTING
i_arbgb = 'NEW_FEBA'
i_dtype = '-'
i_msgnr = '110'.
RFEBBU00
* original transaction currency provided and posting area = 2.
ftclear-selvon = febep-fwbtr. "INSERT - mpEURO
ENDIF. "INSERT - mpEURO
CONDENSE ftclear-selvon NO-GAPS.
*{ INSERT DHTK903977 1
*--> Miguel Estu00E9vez - 16/06/2008
* RIPI 24/04/2008 - Conciliaciones
* Permitir conciliar mu00E1s de un apunte a la vez
data: zkwbtr type kwbtr.
import zkwbtr to zkwbtr from memory ID 'ZKWBTR'.
if ( zkwbtr is not initial ).
ftclear-selvon = zkwbtr.
clear zkwbtr.
endif.
*<-- Miguel Estu00E9vez - 16/06/2008
*} INSERT
APPEND ftclear.
** Begin of comment C5053248
* perform druck_buzei_ftclear using ftclear-agkon. -
How to run two icalenders on the same computer?
How can i run two separate icalenders on the same computer? I have my own icalender with work, home, etc, and it's totally full. I am now running an artists collective and will publish the collectives icalender on the web. I don't, however, want to mix what will be a pretty busy calender with my own already too full one. Is it possible to run two totally separate calenders on the same computer?
macbook Mac OS X (10.4.8)trsv,
Welcome to Apple Discussions.
Create two Groups...
Calendar 1:
Work
Home
etc
Calendar 2:
Collective Calendar
You can then switch which groups you wish to display by activating/deactivating the check mark in the Calendar source window.
That will also allow you to selectively publish the Collective Calendar.
;~) -
How to run two libraries? [11.0.0]
Hey everyone. I've been using iTunes for a long time now, as it is a relatively good program for organizing my huge library> I don't use it to listen to music, but I often need to move files around and onto the appropriate devices for my family. Because of this, I got an external hard drive. From time to time, iTunes will forget that my library comes from my external. usually, this is after booting iTunes without having the external plugged in. This can be a nuisance, because iTunes then decides to fill up my laptop's free space with the large amounts of music I put on at once. It gets especially annoying when I need to consolidate files to ensure they are all on the hard drive because it will consolidate to the computer instead.
My question is, how do I set iTunes up so it will always look for my hard drive and use that as the library first? Then, and only then, if it cannot find my hard drive, it will use my computer's storage. Most important to solving my problem is that during those times it uses my computer's storage, it should automatically use my hard drive if present upon restarting iTunes.
I have figured out how to have two libraries, but I need to know how to put one on a higher priority and as a default that doesn't get changed.
To recap, If I run iTunes without my external hard drive, it changes the library location to my computer and does not put the setting back to how it was.Aarowaim wrote:
how do I set iTunes up so it will always look for my hard drive and use that as the library first?
This is done by default, but it is up to the user to ensure the external or network drive is connected.
Aarowaim wrote:
Then, and only then, if it cannot find my hard drive, it will use my computer's storage.
Again, this is done by default.
If the user fails to connect the external drive before started iTunes the following steps should be taken.
Close iTunes.
Connect drive.
While holding SHIFT, launch iTunes.
When prompted to locate or create a new library, select locate and point iTunes to the external drive.
Is the iTunesLibrary.itl file actually on the external drive or is it on the C drive of the computer? -
Does anybody know how to run two independent instances of Calendar simultaneously?
I've enabled the Debug mode, and have 2 windows open at the same time but can't get them to operate independently. Anybody done this?
The situation is that I work for a music school that uses iCal to keep track of music lessons for multiple tutors in real time, which sync to relevant tutor's iphones. We've just opened a second premises and would like to use the same system, but be able to monitor everything from either school.
Debug mode will let me run two instances of Calendar simultaneously, but removing tutors' calendars from one of the Calendar windows removes them from the other.
Basically I need one Calendar window open for each school, and for them to be independent from each other.
Any takers?How about creating a new "Calendar" with in the same Calendar app?
Calendar App---> File---> New Calendar
Name each Calendar for each business location. Example if the original location is on Main St, name that Calendar Main St and the second on Broadway, name that calendar Broadway.
The other solution could be the same as above, but File---> New Calendar subscription. But I have no idea how that works though.
KOT -
How to run two instances of WoW on a Mac?
So I am looking to run two windows/instances of WoW on my mac. Basically so I can use my mage on a seperate account to rush my lowbies through instances. It wont let me simply load the game twice like on a PC, does anyone have any ideas how I could do it?
I've never played WOW so I do not know how the settings are setup on a Mac but one way that you might be able to do it is to create a second account and try running it in both accounts. Go to System Preferences/Accounts and click on the plus to create a new account. Next click on Login Options and put a check in the box that says Enable Fast User Switching. Then from your Finder in the top right hand corner you will be able to switch between your 2 accounts.
-
How to join two or more surveys to one big survey?
Hello Experts,
how do I join two or more littel surveys to one big survey with one tile and varios sections and subsections?
Thanks for help.
CristinaAs I did not get any answer, I suppose it is not possible, unless you join the coding.
-
How to send two or more XML request messages to call ALSB from ALBPM
Hi All,
I have a scenario where two or more XML messages needs to be sent to the ALSB component from the ALBPM part.
How can this be achieved using PBL coding.Please help me on this.
Thanks,
Prakash.Hi,
Based on my test, I agree with Mr. KR, we could not open two or more xml files with the same name located in different folders with Excel 2013 at the same time, because XML is not the default format of Excel.
Would you like to tell us the reason about this behavior, we might try the other methods to get your goal.
If you have any update, please feel free let us know.
Regards,
George Zhao
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click "[email protected]" -
How to run two sub vi simultaneously??
i need to run two sub vi simultaneously in one main vi, becasue it is a must the two sub vi run exactly at the same time, but now i find that if i put they in one diagram ,in fact they are not exactly run at the same time. if you see in high light mode Just like the attached simple example code. any one can help me to handle this to run the two subvi exactly at the same time ? how to do it ? thanks so much.
Attachments:
how to run subvi simultaneously.vi 11 KBYou are correct, they will not run at exactly the same time. What is it you are actually trying to do? What platform are you developing on? What version of LabVIEW? What processor does your target system have? This information is vital in order for us to assist you. In a nutshell, unless you are running a real-time OS, then the OS you are running is not deterministic. When you say "at the same time", what are you actually referring to? As a note, when executing parrallel operations in LabVIEW, the execution order may or may not be the same with the highlight bubble on as it is when it is running without highlight execution. It is highly unlikely that you will be able to just run two sub-vis at the exact same nS. If you are using DAQ boards, you accomplish this through triggering. Please give a detailed description of what you are doing, and what you see the road blocks being.
Thanks
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?
Maybe you are looking for
-
"Error intitializing communications with the LMS" in Captivate 8.0.1
After updating to 8.0.1.242 and publishing projects as SCORM 1.2 in html5, I get the error message "Error intitializing communications with the LMS" both in the LMS we use and in ScormCloud. This happens in IE 10.0.9200. I am pretty sure we have not
-
GUI update problem: button take time to be disabled
I have a Stop button. In the actionPerformed() method for the button, I disable the button and also some other buttons (using setEnabled(false)) then there are some other codes that include Thread.sleep() method. Then again I enable some other button
-
Auth. obj. controlling layout saving for a COPA report
Hello, Could someone please guide me on which authorization object controls the capability to use the menu option : Settings , Layout, Saving... for a COPA report. The problem is that this options appears dimmed for the users. Thank you in advance
-
How to see all devices that are connected to Apple ID
How to see all devices that are connected to Apple ID
-
Use of JEXC & JEXS condition type.
HI What is the use of following conditions. JEXC-IN Manual Excise. JEXS-Taxes on the PO. Regards Umapathy.M