How to save data in ztable after editing in alv report

how to save data in ztable after editing in alv report?

Hi,
Please find the attachment below.This may be usefull to you.
[http://wiki.sdn.sap.com/wiki/display/Snippets/ALV-Editingandsavingtheeditedvaluesin+Database%28OOPS%29]
Regards,
Ramakrishna Yella.

Similar Messages

How do I save/burn my images,after editing, to a disc and what format JPEG? THX!!!

How do I save/burn my images,after editing, to a disc and what format JPEG? THX!!!

You're lacking information. We need to know what software you are using what version it is. What computer system and what version is the operating system.

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory

Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments

How to save data model design in pdf or any format..?

how to save data model design in pdf or any format..?
i ve created design but not able to save it any mage or pdf format

File -> Print Diagram -> To PDF File

Edited photos will not save in stacked version after editing

edited photos will not save in stacked version after editing

Thank you problem seems to be solved.
edited photos will not save in stacked version after editing
created by Barbara B. in Photoshop Elements - View the full discussion
Is this PSE 12? Go to editor>Help>updates and apply the 12.1 update, if so.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6417103#6417103
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to add date with month after convert number to month?

How to add date with month after convert number to month?
Month Date Result
24 21/11/09 24*(21/11/09)
I want to add both the column and result should be 21/11/11
Thanks
Nihar

Hmm,
Because, you are using YYYY for '09'.
SQL> ed
Wrote file afiedt.buf
1* select to_char(to_date('10/01/09','DD/MM/RRRR'),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(TO
10/01/2009
SQL> ed
Wrote file afiedt.buf
1* select to_char(to_date('10/01/09','DD/MM/YYYY'),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(TO
10/01/0009Or with Add_months
SQL> ed
Wrote file afiedt.buf
1* select to_char(add_months(to_date('10/01/09','DD/MM/YYYY'),36),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(AD
10/01/0012
SQL> ed
Wrote file afiedt.buf
1* select to_char(add_months(to_date('10/01/09','DD/MM/RRRR'),36),'DD/MM/YYYY') from dual
SQL> /
TO_CHAR(AD
10/01/2012-Arun

How to upload data into ztables

Hi all,
How to upload data into ztables
plz sent the detail description as well sa sample programs

Hi Narendra,
Sample code to update the Z db table :
REPORT yupload.
TABLES ybtab.
DATA itab LIKE ybtab OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
CODEPAGE = ' '
filename = 'C:\data.txt'
filetype = 'DAT'
HEADLEN = ' '
LINE_EXIT = ' '
TRUNCLEN = ' '
USER_FORM = ' '
USER_PROG = ' '
DAT_D_FORMAT = ' '
IMPORTING
FILELENGTH =
TABLES
data_tab = itab
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
INSERT ybtab FROM TABLE itab.
ENDIF.
Schedule this program as a Background Job with required time paramters .
Regards,
Ramganesan K.

Having trouble figuring out how to save the original photo after I've cropped it - i.e. I want to create a headshot of my husband from a photo of the two of us, but I also want to keep the original. Seems very basic, but can't seem to figure it out. Any h

Having trouble figuring out how to save the original photo after I've cropped it - i.e. I want to create a headshot of my husband from a photo of the two of us, but I also want to keep the original. Seems very basic, but can't seem to figure it out. Any help would be great!

Use File >> Save As
Choose a different file name so as not to overwrite the original and don't save any changes when closing the original.

How to give no of lines per page in alv report

hi
could anybody tell me
how to give no of lines per page in alv report
i need bottom of page too
if possible plz send the code too
it ll be very helpful to me
thanx
kals.

Hi,
This is possible, using some of the events in the ALV.
You could use AFTER_LINE_OUTPUT event and call you form after say, a certain line count is reached on the list output.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-name.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-form.
APPEND gw_event TO gt_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            it_events                = gt_events[]
and define the form for each event as follows - this would be a dynamic call by the ALV.
*&      Form after_line_output
*       Form for the After Line Output Event in the internal table
*      --> rs_lineinfo
FORM after_line_output USING rs_lineinfo TYPE slis_lineinfo.
IF sy-linno eq v_linno.          "Defaulted value for line count
    perform write_footer.
    NEW-PAGE.
ENDIF.
ENDFORM.                    " after_line_output
For lines per page:
rs_lineinfo-tabindex would give you the index of the current line in the list, which you could use to read the t_outtab table, and reduce the line count of items displayed on the earlier page.
There are a few other events too, like BEFORE_LINE_OUTPUT and END_OF_LIST which you can use as required and print the data.
Regards,
Anil.

ALV . How to remove the sort buttons on toolbar in ALV report?

Hi,experts
As you know, in default case , the alv report will display two sort buttons(ascending ,descending) on its toolbar , So How to remove the sort buttons on toolbar in ALV report?
Thanks for your help .

Hi guixin,
1. Before calling REUSE_ALV_LIST_DISPLAY
2. Write this code :
data : excl type SLIS_T_EXTAB.
data : exclwa type SLIS_EXTAB.
exclwa = '&OUP'.
append exclwa to excl.
exclwa = '&ODN'.
append exclwa to excl.
3. Then while calling the FM,
pass this parameter also .
IT_EXCLUDING = excl
It will work fantastic.
regards,
amit m.

How we can drill-down, sorting, traffic lights, in ALV report

hi gurus ,
how we can drill-down, sorting, traffic lights, in ALV report .
please any one suggest that...
regards,
praveen

Check the sample code for drill-down, sorting, traffic lights, in ALV report.
REPORT YMS_COLOURALV NO STANDARD PAGE HEADING.
TYPE-POOLS: SLIS, ICON.
DATA: FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA: BEGIN OF IMARA OCCURS 0,
LIGHT(4) TYPE C,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MAKTX TYPE MAKT-MAKTX,
COLOR_LINE(4) TYPE C,
TCOLOR TYPE SLIS_T_SPECIALCOL_ALV, "cell
END OF IMARA.
DATA: XCOLOR TYPE SLIS_SPECIALCOL_ALV.
START-OF-SELECTION.
PERFORM GET_DATA.
PERFORM WRITE_REPORT.
FORM GET_DATA.
WRITE ICON_GREEN_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'ABC'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for ABC'.
APPEND IMARA.
WRITE ICON_YELLOW_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'DEF'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for DEF'.
APPEND IMARA.
WRITE ICON_RED_LIGHT AS ICON TO IMARA-LIGHT.
IMARA-MATNR = 'GHI'.
IMARA-MTART = 'ZCFG'.
IMARA-MAKTX = 'This is description for GHI'.
APPEND IMARA.
LOOP AT IMARA.
IF SY-TABIX = 1.
IMARA-COLOR_LINE = 'C410'. " color line
ENDIF.
IF SY-TABIX = 2. " color CELL
CLEAR XCOLOR.
XCOLOR-FIELDNAME = 'MTART'.
XCOLOR-COLOR-COL = '3'.
XCOLOR-COLOR-INT = '1'. " Intensified on/off
XCOLOR-COLOR-INV = '0'.
APPEND XCOLOR TO IMARA-TCOLOR.
ENDIF.
MODIFY IMARA.
ENDLOOP.
ENDFORM. "get_data
FORM WRITE_REPORT.
DATA: LAYOUT TYPE SLIS_LAYOUT_ALV.
LAYOUT-COLTAB_FIELDNAME = 'TCOLOR'.
LAYOUT-INFO_FIELDNAME = 'COLOR_LINE'.
PERFORM BUILD_FIELD_CATALOG.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
IS_LAYOUT = LAYOUT
IT_FIELDCAT = FIELDCAT
TABLES
T_OUTTAB = IMARA.
ENDFORM. "write_report
FORM BUILD_FIELD_CATALOG.
DATA: FC_TMP TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE.
CLEAR: FIELDCAT. REFRESH: FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Status'.
FC_TMP-FIELDNAME = 'LIGHT'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '4'.
FC_TMP-ICON = 'X'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material Number'.
FC_TMP-FIELDNAME = 'MATNR'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '18'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material Type'.
FC_TMP-FIELDNAME = 'MTART'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '10'.
APPEND FC_TMP TO FIELDCAT.
CLEAR: FC_TMP.
FC_TMP-REPTEXT_DDIC = 'Material'.
FC_TMP-FIELDNAME = 'MAKTX'.
FC_TMP-TABNAME = 'IMARA'.
FC_TMP-OUTPUTLEN = '40'.
APPEND FC_TMP TO FIELDCAT.
ENDFORM. "build_field_catalog

How can I call a condition type in my ALV report

I am having one condition type.Then how can I call a condition type in my ALV report.

Hi,
If you have any conditions then filter your data according to that conditions through SQl queries.
And then display it through ALV.
Regards
Mudit

How to get sum for each currency's in ALV Report

Hi,
A column has amounts with various currency's.
May I know how to get sum quantity for each currency in ALV Report?
Thanks in advance.

Hi,
Currency value column should have reference to currency code column.
Regards,
Wojciech

How can i call a condition type into my ALV report

I am developing one ALV report in that how can i call a condition type.I am one condition type PB00 for special price.This special price column should be present at the output list.This special price is not there any one of the database tables.So we will create one condition type for this.How can I develop one condition type and how we may call this condition type into my ALV report.

V/06 is the condition type transaction .You attach a Access sequence to that which is stored in V/07 .
there you can also get based on key combination tables names .
which you can used in your report to include in the ALV .
Contion type PB00 Access sequence PB00
which will have step say
Step Table combination
1 071 Material plant
2 142 SO/dc/DV
here Application would A and table would A table number .
for eg .A071 .

How to save ALV data into DB after Editing values in WDA

Hi All,
I have created a WD application with and able to successfully make columns editable in ALV. But I failed when trying to save the edited data in database.
I use ON_CELL_ACTION event but its not working as of now. I go through few blocks but ultimately i got confused. Please guide me in correct way.

Hi Sanjib,
ON_DATA_CHECK event is triggered every time when you change the data in table
For this event, you have to implement an Event Handler method in which the logic is written.
There is already a thread where this question has been answered:
ALV Edit how to save changes to DB??
I would suggest that you search more on scn before starting a discussion
Regards,
Ashvin

How to save data in ztable after editing in alv report

Similar Messages

Maybe you are looking for