How to save the setting in MDM import manager?

How to save the setting in MDM import manager? After I configure all things in MDM import manager, I try to save the setting, let's say, saved map name is " Test002", and then I export this map into desktop. After that, I logon Import manager again, and import this map file, system show me the same thing that I have to configure it again, because nothing was changed, what I configured before, were all disappeared.

Hi Alfred ,
are You not saving this map in Import Manager ? Import Manager itslef saves the map and remember it . Exporting map is only for backup .
Pls make changes and save the map . Exit and relogin . then see the map . It should be there . Pls let us know the result .
- An

Similar Messages

MDM Import Manager - remove multiple values from a multi valued fiedl

Hi,
We have this multi-valued field and we would like to clean the values from it.
How can we do this using MDM Import Manager?
Example:
Article A
Field XPTO has values Z, T and P.
We want this field XPTO with no values. How can we do a mass actualization to clean the field for some articles?
Thanks and regards,
Maria

*We have this multi-valued field and we would like to clean the values from it.
How can we do this using MDM Import Manager?
Example:
Article A
Field XPTO has values Z, T and P.
We want this field XPTO with no values. How can we do a mass actualization to clean the field for some articles?*
Hi Maria,
There can be multiple ways to achieve this -
1.After doing field mapping for XPTO you can set conversion filter for each of the values.
2.Value map with NULL.
3.Trigger a Workflow on import/record add,run assignment and make that field NULL.
4.Run mass update for conditional assignment based on that value of XPTO.
There can be more ways,whichever suits you best you can go ahead with that.
Hope it helped
Regards,
Ravi

Identifing duplicate master data records using the MDM Import Manager

hi all
I read the Topis "How to identify duplicate master data records using the MDM Import Manager</b>"
i tried to create import maps and to set rules. but when i import them it creates the new vendor records for each rule with rest of the fields blank.
when i import vendor data all the three fields i.e Match rate , match type and match group are blank.
My Question is :
I am getting vendor data from SAP R/3.
In which source (in lookup xml file or data xml file) do i have to include these above three fields and how all the rules will be reflected in repository?

Hi Sheetal
Here we go when do you Import any data (vendor master) please follow the following steps;
1. First of all apply the map to the source data
2. In the Match Record tab there are 3 possiblities
   a.[Remote Key] : Checks the current source rec with
     repository along with all the fields - This is
     default
   b.Remove [Remote key] - by double click the same; and
     choose any single fields like Vendor Number or
     name - Then the current record will be matched
     with the repository based on the field.
   c.Instead of single field you can choose combination
     also.
3. Based on the Match results, match class will be set
   automatically;
   a. None
   b. Single
   c. Multiple
4. Then Match Type
    a.Exact-All the individual value matches are Equal.
    b.Partial-At least one value match is Equal and at least one Undefined; no value matches are Not Equal.
    c.Conflict-At least one value match is Equal and at least one value match is Not Equal.
5. then chek the Import status and Execute the import.
Hope this helps you.
cheers
Alexander
Note: Pls dont forget reward points.

How to save the changes of trackpad in gest account ?

how to save the changes of trackpad in gest account because every time that i change them and restart it, it lose the changes ...

Hey cccosmas,
Thanks for the question. The following article provides an answer to your question:
OS X Mountain Lion: Set up guest users
http://support.apple.com/kb/PH11321
When guests log in, they don’t need a password. While logged in, they can’t change user settings or computer settings.
Important: Files created by a guest user are deleted when the user logs out. A temporary home folder is created for the guest user’s files, but this folder and its contents are deleted when the user logs out.
If you require these settings to be modified and retained in a secondary account, it may be best to setup a new user account:
OS X Mountain Lion: Create a new user account
http://support.apple.com/kb/PH11468
Thanks,
Matt M.

How to save the edited datagrid using array collection?

<?xml version="1.0" encoding="utf-8"?>
<s:View xmlns:fx="http://ns.adobe.com/mxml/2009"
                    xmlns:s="library://ns.adobe.com/flex/spark"
                    xmlns:mx="library://ns.adobe.com/flex/mx"
                    title="demo2">
          <fx:Declarations>
                    
          </fx:Declarations>
          <fx:Script>
                    <![CDATA[
                              import mx.collections.ArrayCollection;
                              import mx.events.FlexEvent;
                              import spark.components.gridClasses.IGridItemEditor;
                              import spark.components.gridClasses.IGridItemRenderer;
                              import spark.events.GridItemEditorEvent;
                              [Bindable]
                              private var myDP:ArrayCollection = new ArrayCollection([
                                        {label1:"Day1 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day2 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day3 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day4 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day5 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "},
                                        {label1:"Day6 ", label2:" Sub1", label3:"Sub2 ", label4:"Sub3 ", label5:"Sub4 ", label6:"Sub5 ", label7:"Sub6 "}
                              protected function myDG_gridItemEditorSessionSaveHandler(event:GridItemEditorEvent):void
                                        // TODO Auto-generated method stub
                              protected function button1_clickHandler(event:MouseEvent):void
                                        // TODO Auto-generated method stub
                                        navigator.popView();
                              protected function button2_clickHandler(event:MouseEvent):void
                                        // TODO Auto-generated method stub
                                        myDG.editable=false;
                                        myDP
                              protected function myDG_exitStateHandler(event:FlexEvent):void
                                        // TODO Auto-generated method stub
                    ]]>
          </fx:Script>
          <s:DataGrid id="myDG" x="10" y="45" width="460" height="240" dataProvider="{myDP}"
                                        editable="true" exitState="myDG_exitStateHandler(event)" fontSize="11"
                                        gridItemEditorSessionSave="myDG_gridItemEditorSessionSaveHandler(even t)"
                                        rowHeight="30" variableRowHeight="true" selectionMode="singleCell" >
                    <s:columns>
                              <s:ArrayList>
                                        <s:GridColumn dataField="label1" headerText="day" editable="false" />
                                        <s:GridColumn dataField="label2" headerText="9-10am"/>
                                        <s:GridColumn dataField="label3" headerText="10-11am"/>
                                        <s:GridColumn dataField="label4" headerText="11am-12noon"/>
                                        <s:GridColumn dataField="label5" headerText="1-2pm"/>
                                        <s:GridColumn dataField="label6" headerText="2-3pm"/>
                                        <s:GridColumn dataField="label7" headerText="3-4pm"/>
                              </s:ArrayList>
                    </s:columns >
          </s:DataGrid>
          <s:Button x="404" y="10" width="53" height="27" label="Back" click="button1_clickHandler(event)"
                                fontSize="13"/>
          <s:Button x="24" y="10" width="56" height="27" label="Save" click="button2_clickHandler(event)"
                                fontSize="14"/>
</s:View>
please help me with this code...i dontknow how to save the data edited in the datagrid back to my arrayollection!!!

please help with this......

How to save the data to sap abap using Adobe Flex

Hi Everybody......
I am new to Adobe flex with sap abap.
      How to save the data in sap abap using Adobe Flex coding is Action Script and using RFC web service.
Please give me any suggisions on that.
Thank you
Venkatesh V

Hi Venkatesh,
Try with folowing coding...
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute"
     initialize="initApp()">
     <mx:Label x="10" y="23" text="Airline" width="90" id="lblAirline"/>
     <mx:TextInput x="108" y="21" id="txtAirline"/>
     <mx:Button x="10" y="49" label="Get Data" id="btnGetData" enabled="false" click="getData()"/>
     <mx:DataGrid x="10" y="97" id="dgFlightData" dataProvider="">
     </mx:DataGrid>
       <mx:Script>
          <![CDATA[
               import mx.collections.ArrayCollection;
               import mx.rpc.AbstractOperation;
               import mx.rpc.events.FaultEvent;
               import mx.rpc.soap.LoadEvent;
               import mx.rpc.events.ResultEvent;
               import mx.rpc.soap.WebService;
               [Bindable] public var flightData:ArrayCollection;
    private var flightWS:WebService;
     private function initApp():void{
          flightWS = new WebService();
          flightWS.wsdl = "http://uscib20.wdf.sap.corp:50021/sap/bc/soap/wsdl11?services=ZGTEST&sap-client=000";
        flightWS.addEventListener(FaultEvent.FAULT,onWSError);
          flightWS.addEventListener(LoadEvent.LOAD,onWSDLLoaded);
         flightWS.addEventListener(ResultEvent.RESULT,onFlightWSGotResult);
          flightWS.loadWSDL();
private function getData():void{
          var operation:AbstractOperation = flightWS.getOperation("ZGTEST");
          var input:Object = new Object();
          input.Airline = txtAirline.text.toUpperCase();
          operation.arguments = input;
          operation.send();
     private function onWSError (event:FaultEvent):void{
     private function onWSDLLoaded(event:LoadEvent):void{
          btnGetData.enabled = true;
     private function onFlightWSGotResult(event:ResultEvent):void{
          flightData = event.result.SFLIGHT;
          ]]>
     </mx:Script>
</mx:Application>
Regards,
Vinoth

How to save the data present in TEXT BOX?

Hi friends i am able to create a text editor in one of my screen but i want to know how to save the data when the text is entered in that text box and retrive when they open the screen?

Hi ,
Please check the format below since it is based on a working code
first you need to create a text in s010 function module...
there should be some key based on which you plan to save the text..imagine it is Purchase order then..PO+item numner is always unique.eg:0090010(900PO/item10).so in the code you can append these two and they will be unique..so you can always retrieve them,overwrite,save them anytime you need
**************data declarations
TYPES: BEGIN OF TY_EDITOR,
EDIT(254) TYPE C,
END OF TY_EDITOR.
data: int_line type table of tline with header line.
data: gw_thead like thead.
data: int_table type standard table of ty_editor.
****************fill header..from SO10 t-code..when you save you need the unique key..youfill it here and pass it in save_text function module
GW_THEAD-TDNAME = loc_nam. " unique key for the text -> our unique key to identify the text
GW_THEAD-TDID = 'ST'. " Text ID from SO10
GW_THEAD-TDSPRAS = SY-LANGU. "current language
GW_THEAD-TDOBJECT = 'ZXXX'. "name of the text object created in SO10
*To Read from Container and get data to int_table
CALL METHOD EDITOR ->GET_TEXT_AS_R3TABLE
IMPORTING
TABLE = int_table
EXCEPTIONS
ERROR_DP = 1
ERROR_CNTL_CALL_METHOD = 2
ERROR_DP_CREATE = 3
POTENTIAL_DATA_LOSS = 4
others = 5.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop data from int_table and save to int_line-tdline appending it.
*save the text
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
HEADER = GW_THEAD
TABLES
LINES = InT_LINE
EXCEPTIONS
ID = 1
LANGUAGE = 2
NAME = 3
OBJECT = 4
OTHERS = 5.
IF SY-SUBRC 0.
ENDIF.
*To pass to Container
CALL METHOD EDITOR ->SET_TEXT
hope that the above sample with helps you solve the problem
Please check and revert,
Reward if helpful
Regards
Byju

How to Save the "Document Info" Details Action Via

I saved the "Document Info" details in illustrator manually using "Document Info Pannel". Could you please expain how to save the "Document Info" details through illustrator action.
Thanks,
Prabudass

When in the document info window of a file there is a small triangle in the top right corner from this you have fly out menus to save/delete or show metadata templates. You can use this to save groups of metadata. Once you have a bunch of groups you can quickly use this to set your info. Bridge will also allow you to append or replace metadata from these saved templates too

WS-C4006 How to save the configuration

Hi,
I have Cisco 4006 Switch model; normally we don't need to save the configuration on this device but somehow this device is not saving any configuration.
Can someone help me; how to save the configuration. Attached is the IOS version detail.
****************** show version ******************
WS-C4006 Software, Version NmpSW: 7.1(2)
Copyright (c) 1995-2002 by Cisco Systems, Inc.
NMP S/W compiled on Feb 7 2002, 16:53:43
GSP S/W compiled on Feb 07 2002, 15:24:55
System Bootstrap Version: 5.4(1)
Hardware Version: 3.2 Model: WS-C4006

hi
can u verify whether this command is enabled in ur box or not ?
set config mode text auto-save enable
hope you are aware of this cli which does save the configs automatically after every 30mins.
regds

How to save the string from JTextFied to database?

can i know how to save the data from JTextFied to databse. Is it using update?

The most straightforward way would be something like:
String myKey=myKeyField.getText();
String foo=fooField.getText();
String sql="update mytable set foo='"+foo+"' where mykey='"+myKey+"'";
connection.createStatement().executeUpdate(sql);
This example assumes that the input fields cannot possibly contain quotes or the string won't be built correctly. Which by the way brings up a question I'd be interested in hearing others answer: What do you do about this? Sometimes I use PreparedStatement which handles that problem, other times I write my own little function to escape the string properly.
You can also read the record into a ResultSet and use ResultSet.update(). I'm mostly using mySql and I found that in mySql ResultSet.update just creates a SQL update statement like I did above and executes it, so the only real advantage would be if you find the syntax more convenient. Perhaps other database drivers do something different that would give other pros and cons.

How to save the text from text area back to a text file?

Hi all,
Now I am doing a small panel which containts a JTextArea, this TextArea will read the content from a text file, then display the content of the text file on the TextArea itself.
My idea is, allow the user to modify the content in the textarea (I set it Editable=true;), then save it. After the user press the save button, the content in the text file will be updated accordng to the user;s modification on TextArea.
I had done the displaying part by using JavaI/O (BufferReader), now any expert here know how to update the TextArea content back to the text file itself? PLease teach me, THANKS !!!

NOw I had manage to clear out the error, but now the problem is when I click on the 'save' button, this function clear out the entire text file for me !!!
The code are as below:
       if(e.getSource()== vButtons[0])
          try{
           String str;
           String Ky = tArea.getText();
           BufferedWriter buffWrite=null;
           BufferedWriter in1 = new BufferedWriter(new FileWriter("Keyword.txt"));
                    buffWrite.write(Ky);
                buffWrite.flush();
                    buffWrite.close();
                in1.close();
          catch (IOException ex) {
          ex.printStackTrace();
        if(e.getSource()== vButtons[1])
              new panel();
              dispose();
         if(e.getSource()== vButtons[2])
            System.exit(0);
    }     Please tell me how to save the TextArea to the text file, THANKS !!!

I can't save the setting for dowloads to go to the specified folder (such as the desktop). It restores to default when I close Forefox.

I can't save the setting for downloads to go to the specified folder (such as the desktop). It works once but it restores to default next time I open Firefox.
== This happened ==
Every time Firefox opened

Make sure that you not run Firefox in [[Private Browsing]] mode.
In Private Browsing mode some menu items are disabled (grayed) and some features like visited links and others are disabled and not working.
You are in Private Browsing mode if you see "Tools > Stop Private Browsing".
See [[Private Browsing]] and http://kb.mozillazine.org/Issues_related_to_Private_Browsing
See also http://kb.mozillazine.org/Preferences_not_saved and [[Preferences are not saved]]

I want to use Get Panel Image in Labview 5.0.1 and need details on how to save the BMP data generated

I am trying to generate an application that saves a copy of its front panel on completion. This is easy to do using an invoke node with Print VI to HTML but this does not work in an .exe format. I have seen elsewhere that you have to use the Get Panel Image method, but no details are supplied in LV 5.0.1 documentation of how to use the "image" data (1-D Unsigned Byte array) that is generated. I want to save this in a format that can then be read as a bitmap in any standard graphics package. Any assistance?

Hi,
If you'd upgrade to LV5.1 or 6 you could use the 'standard' vi's for this.
You need a VI called "Write BMP File.vi". It's not shipped with LV5.0.1.
This vi only uses 3 subVI's, so perhaps someone at NI can convert it and
send it to you (sorry, I won't, it's copywrited).
If you cannot get this VI anywhere, you'll need to figure out the BMP file
format yourself. It's not too complicated, but still could take some days.
Perhaps someone figured it out before LV5.1 was released.
Regards,
Wiebe.
"RDK" wrote in message
news:[email protected]..
> I want to use Get Panel Image in Labview 5.0.1 and need details on how
> to save the BMP data generated
>
> I am trying to generate an application that saves a copy
of its front
> panel on completion. This is easy to do using an invoke node with
> Print VI to HTML but this does not work in an .exe format. I have seen
> elsewhere that you have to use the Get Panel Image method, but no
> details are supplied in LV 5.0.1 documentation of how to use the
> "image" data (1-D Unsigned Byte array) that is generated. I want to
> save this in a format that can then be read as a bitmap in any
> standard graphics package. Any assistance?

How to save the output of sap script to pdf document in sap

hi abapers
how to save the output of sap script in sap so that can retrieve the saved document later.
i have to save the rcia output from sap script in pdf document in sap so that it can be retrieved later
how to use dms

Hi deepika,
This thread will solve ur problem OTF -> PDF
Regards,
Pravin

How to use the set functions effectively in webi ,please let me know with detail

how to use the set functions effectively in webi ,please let me know with detail

Hi,
we use use set functions on heirarchies with aggregate functions mostly .
If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
Member_set can include multiple sets separated by semicolons (;).
The list of member sets must be enclosed in {}.
If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
Eg .
1)     Ancestor
=Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
2)     IsLeaf
=[Test Hierarchy].IsLeaf
You can use this function when you want to show your Measure only at lower level .
3)     .Depth
=[Test Hierarchy].Depth
This is also function used with hierarchy to find Level of Members .
Follow this link for PDF reference .
Page 147
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
search on SCN this question was discussed before also one those links .
http://scn.sap.com/thread/3183380
Hope this will help you .

How to save the setting in MDM import manager?

Similar Messages

Maybe you are looking for