How to schedule Process chains in Bi Admin Cockpit

Hello friens,
I am working on installing Bi cockpit.
After installing the info providers, i have to schedule the process chains for Bi admin Cockpit.
I know the transaction is RSPC.
But I dont know how to schedule process chains for Bi admin cockpit.
How to schedule Init and Delta
If you can send me step by step documents.
Or any good sap note number.
Or any good links i will really apreciate it.
I want to schedule process chains
Content Master Data
Data Load Statistics # Delta
Data Load Statistics # Init
Query Runtime Statistics # Delta
Query Runtime Statistics # Init
System Master Data
Please advise

Hi,
Please check out this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
Hope it helps.
Thanks
Mona

Similar Messages

How to schedule Process Chain with Full Update for the past closed month

Hello,
I have an HR-BN benefits transactional data extractor - http://help.sap.com/saphelp_nw70/helpdata/en/08/b01d3cf8aa101ce10000000a11405a/frameset.htm
One of the selection fields for that extractor is calendar year/month 0CALMONTH and it is a full update extractor.
SAP recommends running this extractor once a month after the month has been closed.
If I were to include this update/extract into my process chain, would it be possible to automate the process in a way where the process chain is scheduled to execute once a month (I know how to do that), but that also only pulls values for the past/closed CALMONTH (as if it had a variable value of which would be automatically set to the last closed month when pchain is run)? As I mentioned 0CALMONTH is one of the selection criterias in the infopackage for that extractor.
let me know how I might be able to do that.
P.S. we are on BI 7.0/2004s
Thank you

For Calmonth selection in infopackage you can use the SAP-Exit OLAP Variable 0CMLMON (Last Month)
select Type "7" ("OLAP Variable")
and in Details of Type screen, Select OLAP Variable "0CMLMON" Which is SAP-Exit variable for Calmonth, that returns the last month from the current system-date.
If variable 0CMLMON is not active, you need to activate it from Business content.
Assign pts if helpful.

How to schedule process chains to be run on certain dates contained in DSO

Here is what I am trying to do.
We have a set of objects that need to be loaded with data, however they have to be loaded only on certain dates.
We are using process chains. What I would like to do, is to automate this load.
Essentially, I am thinking that I need to create some kind of event/service on the BW side that will sit and listen by comparing the system date to a set of dates defined in one of the DSOs containing data on Academic Calendar.
For example, the process chain should only start when the system date is = to the beginning of academic subsession date defined in one of the DSOs called Academic Period. Once the execution happens, then the event/service would sit and listen until the next time system date is = one of the dates in that DSO.
I am looking into the detailed steps in how this automation could be accomplished.
Thank you

did this once a long time ago...other kind of requirement but the principle is the same.
create a program_1 that updates table TVARV.
you need a selection screen with a paramter 'run_pc_2' and an input field for 'X' or ' '.
when you need to run chain2, you run this program and put X in the input field and run the program to update TVARV.
after the run of the process chain you run the program again and put ' ' in the input field.
create a second program_2 that reads this entry in table TVARV. If 'run_pc_2' = 'X' then you trigger event1. else you trigger event2.
create two process chains.
1/ PC1PC2PC4
2/ PC1PC3PC4
the first process chain is to be scheduled by event triggering after event1.
the second one is to be scheduled by event triggering after event2.
schedule program_2 to run daily.
the program will now check the entry in table TVARV and will trigger the corresponding process chain.
i hope it's clear what i mean to say.
M.

How to find process chain using background job in sm37

How to find process chain using background job in sm37

Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM

How to create Process chain for Aggregate for Master data

Hello friends,
I created Aggregates on Navigational Attributes.
Now they are working fine, but i need to know that how shall i create the Roll up for Aggregates on Navigational Attributes.
The point is the master data changes frequently a lot of time for e.g. for 0customer etc.....
So if any one can send me the step by step documents so as to know how to roll up the Aggregates for Navigation attributes or for aggregates created on Master data....
How to create process chains for the same ?????????
Because if master data changes, then rolling up the aggregates straight forward will not help.
So we need to write a process chain so that it deactivates the aggregate and reactivate again and fill up again..........
If i mis interpreted something please rectify it.......
Please advise

Hello,
the changerun that you have to schedule in order to activate the master data will adjust the aggregates automatically. There is no need to deactivate them after master data loads.
Best regards,
Ralf

How to create process chains,and how to use process like and or xor

Hi,
How to create process chains,and how to use process like and or xor.
can any one please give me a example in each.
Thanks,
cheta.

Hi Cheta,
Here is step by step procedure to create process chains
Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
Creating Process Chains
Prerequisites
If you want to include a load process in the process chain, you need to have already created an InfoPackage.
You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
Creating Process Chains
You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
Creating a Process Chain Directly in the Process Chain Maintenance Screen
You are in the BW Administrator Workbench.
1. Click on the Process Chain Maintenance icon in the AWB toolbar.
The Process Chain Selection dialog window appears.
2. Choose Create.
3. Enter the technical name and a description of the chain, and confirm your entry.
The Add Start Process dialog window appears.
4. Create a variant for a start process.
1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
5. Use the drag-and-drop function to add the relevant processes into your process chain.
You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
Hope this helps
Regards
Karthik

Scheduling process chain in 1st and last of the month

Hello ,
Can some one help in scheduling the process chain at the starting of the month and the end of the month ?
The chain has to start on 1 st and 28th of every month.
Help me with the informations please!
Points will be assigned!
Thanks in Advance
Ram!

Have your process chain to start "After event". Then create an ABAP program to call function module BP_EVENT_RAISE. There are numerous postings in this forum on how to do this.
Next create two monthly jobs (one scheduled on the 1st and the other on the 28th) using SM36, and the only step in the job is to call the program to trigger (raise) the event. By triggering the event, your process chain will execute.
Check these links:
Re: scheduling process chain 3 specific times a day

How to Trigger process chains??

hi all
How to Trigger process chains??
Can anybody step by steps??
thanks
Senthil

The background control options are available to directly schedule the start process. You can start the start process immediately , that is when activating the process chain, for a specified time, or after a particular event. When you activate the process chain, the start process is scheduled in the background as defined in your selections.
You can also trigger the start of a process chain via a meta chain. A meta chain is when a process chain, to which you set this start condition, is fixed to another process chain. The process chain is started directly by this meta chain.
When you start the start process via a meta chain, it is not scheduled after you activated the related process chain. The process is only started when the meta chain, to which it is linked, is running.
The remaining chain processes, that is the application processes and the collection processes, are scheduled to wait for an event.
The start process has the following special features:
Only the start process can be scheduled without a predecessor process.
The start process can not be a successor to another process.
Only one start process is allowed for each process chain.
One start process can only be used in an individual process chain

UNCAUGHT_EXCEPTION with msg CX_RSR_X_MESSAG while scheduling Process chain

Hi Gurus,
We are facing a short dump while scheduling process chains, as follows:
 
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE
 
Error analysis
 An exception occurred which is explained in detail below.
 The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
 and
 therefore caused a runtime error.
 The reason for the exception is:
 No text available for this exception
 
Information on where terminated
 Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
 The main program was "RSPC_MAINTAIN_SINGLE ".
 In the source code you have the termination point in line 82
 of the (Include) program "LRRMSU13".
 
We tried to schedule it as a remote process chain from some other system it cancelled the job there with an ERROR_MESSAGE. We checked the RFC Connections at the source system side but it is working properly. We then tried to schedule the chain manually, we had this exception. Then we tried to have a look at previous logs of the process chain. It had this exception. We tried to reactivate the chain it was successful but when tried to schedule the chain same issue again. We tried to run the Meta chains under the same chain separately. They too gave us the same exception.
Please help.
Regards,
Sourabh Deo

S Simran wrote:
Hi,
>
> Ours is a fresh installation..
>
> When i am loading for the first time till PSA it is successful..
>
> As HR data sources are 3.5 datasources, i am loading cube via infopackage..
>
> When i start the load to cube it is giving me dump with exception CX_RSR_X_MESSAG.
>
> i checked note 615389 which talks about "buffering of number range object BIM9999998". the 0REQID is not buffered, but it does not throw any error msg in RSRV to correct the error..
>
> and one more note 1157796 which talks about patches with version BI 7.0.
>
> Now we are in BI 730 with heighest level 0005.
>
> Not sure how to solve this error
>
> Any ideas?
What's your SP? Are you having any master data updates left unattended? Check the Master data objects, check the flows. Related SAP Notes : 914304 / Check 967202(SP10) and 998673(SP11), 1157796, 763203 and 615389
Edited by: Arun Bala G on Feb 12, 2012 9:50 PM

Modifiying, Transporting and Scheduling Process Chain

Hello ALL,
i have to create a new process chain for a delta Load and put this process chain in a big existing Meta Chain, after i have to transport to Quality System.
if i control the difference between Dev and Quality system to have an idea i see that the Infopackages in Dev have the execution tab: Load Data Immediately without job: BI_BTCH
in Quality some Infopackages have execution tab: run successively in batch with job like this:
BI_BTCH LX6CW08S1ICM04I4O06KOPL
can you tell me please in detail how should i complete this activity:
- wich type of control should i do before creating and modifiying process chain in DEV and Quality
- how should i do to control in Quality the scheduling of a process chain
- if i modify a process chain in DEV and after i will transport in Quality what will be the affect in Scheduling, the scheduling will be the same without problem or i have to schedule again
- in generale how can i schedule a process chain, wich transaction and how in detail
Thanks a lot for your help
Bilal

Hi Bilal,
1) EVENT: When you want to have a process chain 'A' to be started after completion of a process chain 'B' or any process in process chain 'B' we can use this event. These two chains can also be from different BI systems. Like Chain 'A' could be from one production system and Chain 'B' could be from different production system. As soon as the chain A finished an event will be triggered and this event will trigger the chain B. The start time of chain B might differ because it depends on the completion of chain A. To schedule a process chain using an event, Go to Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections. click on "after event," give the event name in the slot and select the periodic job.
2) RUN JOB PERIODICALLY: When you want to have the chain run for more than once periodically we select this option. Suppose, chain B has to run after completion of chain A periodically we have to use this option. If you do not check this option, your chain B will run only once when the event is triggered after completion of Chain A. From the next time onwards, it not run even the event is triggered.
3) JOB: For every process when it runs a job will be created assainging it to a work process in the system. Similarly, when the chain starts a job will be created containing the log of the run. Also, in the scheduling options of a process chain, you can have your process chain started after completion of a particular job in the system (ex: an attribute change). For this, Go to Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections. click on "after job" give the job name in the slot and save the settings.
4) SCHEDULING PROCESS CHAIN: Means to make settings to a process chain so that it will run on a periodic basis at a certain time. If you want to start a chain immediately, you will choose the option immediately and trigger it. It will run for only once. But, if you want to have your chain run everyday at 7:00 am in the morning, you have to schedule it using the scheduling options as below:
In Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections." Click on Date/Time button. Give the start date and time in the Scheduled Start slots. (Ex: 09-04-2009, 7:00, to have the chain run at 7:00 everyday starting from tomorrow). Tick the check box Periodic job in the bottom and click on "periodic values" button and select the option as daily and save it. Then click on "Restrictions" button to specify the factory calander. The Tcode for calander is SCAL, where you can see all the factory calanders in the system and you can choose that suits your requirement. Save the changes and navigate back to process chain maintaince screen and click on "Schedule" button.
Now your chain is automated for trigger

How tp Deactivate Process Chain

Hi Experts,
How to Deactivate Process chain.
I have an IP in the PC which need to executed manually, but if i do that the processes which are preceeding IP in the chain are all getting triggered.
so before i start executing IP, i need to deactivate the PC.
Please throw some light how can i achieve it.
Thanks
Sanjay

Hello Simran,
even If i remove from schedule, once the IP triggers and after the load is success,i doubt those processes will get triggers.
are you sure that it will not triggers the following processes.
Thanks
Sanjay

How to stop process chain, if it is taking too much time than expected.

Some times if a process chain takes to much time to finish than expected, how I can stop the process chain and execute it again.
Thanks in Advance.
Harman

how I can stop the process chain ??
If the job is running for a long time ,
1)GOTO RSMO and SM37 and check the long running job over there.
2)There you can see the status of the job.
3)If the job is still running you can kill that job
4)delete the failed request from data target.
for more details go to this below link
how to stop process chain if it yellow for long time
how I can execute it again ?
GOto Function module RSPC_API_CHAIN_START
and give u r process chain name there.and execute.

How to change process chain in SAP APO, in RSCP tcode.

HI SAP APO Experts
I am from SAP ABAP background, I need to change a 'AND' operator in process chain in RSCP tranaaction in SAP APO.
I dont have any idea how to change process chain.
Could you please help me how to change process chain in SAP APO in RSCP tcode.
Appreciate your help or comments.
Sandeep..

Hi Sandeep,
The t-code RSCP does not exist in SAP APO. The correct t-code is RSPC.
Step 1:- In RSPC t-code, select the process chain which you need to change.
Step 2:- Double click on it.
Step 3:- It will display the various programmes attached to the process chain. Go to change mode by clicking on the change indicator (Control + F9)
Step 4:- Select the programme area where you need to do the correction or change. Double click on it.
Step 5:- It will take you to the programme and its selection contents. Make the relevant changes. You can directly carry out the change in se38 also if there is variant kind of changes for that particular programme.
Step 6:- Once the changes are done, save the changes and press F3 button which will take you to the home page of the process chain
Step 7:- Save again so that the change in the programme alongwith the process chain will get saved.
Regards
R. Senthil Mareeswaran.

How to create Process chain in BI 7.0

hi,
I dont know how to create process chain in BI 7. If any one have document step by step process to create process chain. help me. thank u.

check these links..
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00a1f389-ec7c-2c10-04bc-9d81b3084171
http://wiki.sdn.sap.com/wiki/display/BI/Processchainscreationandmonitoring
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/900be605-7b59-2b10-c6a8-c4f7b2d98bae
http://wiki.sdn.sap.com/wiki/display/BI/FiveWaystoEnhanceBIFunctionalityUsingABAP--PartV--ABAPinProcess+Chain

How to create process chain ?

hi all,
will you please simlify how to create process chain if anybody has a screen shot or slide show about pc creation it will definatly help me a lot.
rewrd point for sure,

This may help:
[http://help.sap.com/saphelp_nw04s/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm]
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045]
Regards,
Jordi

How to schedule Process chains in Bi Admin Cockpit

Similar Messages

Maybe you are looking for