How to search for a fields ?

Hello,
I know it's an easy question but I've not find, how to search for a fields in Database on CR XI R2 ?
Thanks in advance

Hi Alexandre
Do you want to see which database fields you have inserted in Crystal Reports and in which section you have inserted what fields?
If yes then
-open formula editor
-In the right side pane expand Formatting Formulas.
-Expand all the sections one by one and it will show you database fields,formulas and all the objects used in the sections.
Hope this will clarify your doubts.
Regards
Asha.

Similar Messages

How to search for a field and its value in an internal table

Hi,
I want to search for a field(which i dont know whether it exists or not) in an internal table and on finding that field, I have to update the value of that field. How do I do it? I think its similar to how SEARCH works but i wanted to know the internal table eqivalent of it.

Hi Sujay,
this code will help ful to u, just gi through it,
TABLES : KNA1,VBAK,VBAP.
***********INTERNAL TABLE DECLARATIONS****************
DATA : IT_KNA1 TYPE TABLE OF KNA1,
       WA_KNA1 TYPE KNA1.
DATA : IT_VBAK TYPE TABLE OF VBAK,
       WA_VBAK TYPE VBAK.
DATA : IT_VBAP TYPE TABLE OF VBAP,
       WA_VBAP TYPE VBAP.
START-OF-SELECTION.
SELECT * FROM KNA1
INTO TABLE IT_KNA1
WHERE KUNNR = P_CUST.
IF NOT IT_KNA1 IS INITIAL.
    SELECT * FROM VBAK
    INTO TABLE IT_VBAK
    FOR ALL ENTRIES IN IT_KNA1
    WHERE KUNNR = IT_KNA1-KUNNR.
    IF NOT IT_VBAK IS INITIAL.
      SELECT * FROM VBAP
      INTO TABLE IT_VBAP
      FOR ALL ENTRIES IN IT_VBAK
      WHERE VBELN = IT_VBAK-VBELN.
    ELSE.
      WRITE : / 'Customer',P_CUST,'does not exist ......'.
    ENDIF.
ELSE.
    WRITE: / 'sales order does not exist for',P_CUST.
ENDIF.
Rewards points plz if useful
Ganesh.

How to search for a field in a table

Hello,
I have technical name of a field. How can I check in which table it is contained in. Also, what is the difference between a table and a structure where data is stored.
I want table name of PO text field which is contained in Info Record Text.
How to check table contents.
Regards,
Priyanka

Hi Priyanka,
If you know the technical name of the field, use T CODE SE15.
Select Database Fields.
You can then enter the field name in the Field and execute. System will list all tables containing the field, then you can shortlist the table you are looking for by reviewing the table descriptions.
Hope this helps !

How to search for a badi

how to search for a badi
srinivas.

Hi Srinivas,
Good
Check this link
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
Run this program
*& Report ZNEGI16 *
REPORT ZNEGI16 .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Solution 2
1.Get the Package of the program name of the transaction.
2.Go to Transaction SE18.
3.Press F4 on the badi definition name.
4.Click the information systems button.
5.Give the Package name and press enter.
6.Select the BADI that is relevant to the application.
Good Luck and thanks
AK

How to search for (new) BAdIs?

Hi,
I found some forum threads, blogs, and wikis in sdn about "How to search for BAdIs".
Here the list I found:
1. SE18 u2013 BADI Definition
2. SE81 u2013 Application Hierarchy
3. SPRO u2013 SAP IMG Reference
4. SE84 u2013 Object Navigator u2013 Repository Information System
5. SPAU_ENH (ECC6.0) u2013 Enhancements -> Simple or Composite (spots, implementations, sections, upgrades)
6. ST05 u2013 SQL Trace -> Buffer Trace
7. SE24 -> CL_EXITHANDLER -> Breakpoint at Method GET_INSTANCE -> Run Transaction -> Exit_name -> BADI name
The fastest ways are ST05 and SE24, I think. Are there such effective ways for the new, kernel based BAdIs? ST05 and CL_EXITHANDLER with debugger donu2019t work.
thanks in adavance,
Michael

Hi,
Missed one more method
The below steps should enable you to find any BADI related to any transaction in a matter of minutes.
Go to the transaction SE37 to find your function module.
Locate the function SXV_GET_CLIF_BY_NAME.
Put a breakpoint there.
Now open a new session.
Go to your transaction.
Goto the screen where you want to find any BADI available, it will stop in this function.
Double click on the function field EXIT_NAME.
That will give you name of the BADI that is provided in your transaction.
Again execute and it stop again and fill with new BADI name if any
Repeat the same step and you come to know how many BADI exist
Regards
Bala Krishna

Searching for the fields of a table(very very urgent)

Hi all,
i am in graet trouble now.i am searching for the fields like
1)country of origin where the finished good is created.
2) customer sales order number
3)customer sales order line number
i am writing a report for delivery order.in this report i have to refer customer PO & customer SO .
i mean, my company has a customer ( seagate) & seagate has a customer (let maxtor).initially maxtor will give a PO to seagate then seagate will raise a SO againest maxtor.
Then seagate will send PO number(of maxtor), PO line number,SO number(seagate), SO line number(seagate) to our company.
Then i have to write a report for sales order & delivery order.in these reports i have to refer seagate PO number & seagate SO number for reference.
i got PO number as vbkd-bstkd but not getting any field for reference Sales order.plz advice me on this. it is very very urgent.
ur idea is highly appreaciated.
Thank u very much.
Regards
pabitra

check out tables VBAK(sales order header), VBAP(sales items)

How to search for file in jsp page

i need help on how to search for a file in a folder where there is a lot of subfolder.like how u search in a document in windows. i need a complete codes in jsp page.
thank you in advance.
Message was edited by:
n_dilah

no i need to do a search engine in jsp page which is the j2ee.
i type smth than tat file from any folder will appear the same way when u need to search your file in a document in windows.
well can u nice people tell me where i can get the codes bcos i stinks when it come to programming.
thank you very very very much.

How to search for a BADI in a transaction

Hi All,
Please let me know the steps to find a BADI for a transaction.
Thanks,
Jaffer Ali.S

check this.
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
/people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
Regards
Kiran Sure

How To Search For a Specific File name?

Hello Everybody
How To Search For a File Like NewFile.txt in a Root Like C:\\
And If The File Is Found Open It And Write In It?

http://forum.java.sun.com/thread.jspa?threadID=5194090&messageID=9763314

How to search for a certain cross reference using its name in FM 11?

How to search for a certain cross reference using its name in FM 11?

Well, thank you. I am only using Find dialog box. By "name", I'd like to give an example. The background is FM 11 structured. I have an element "xref" which is used to make cross reference. Now In Chapter 1, there is a sentence like "This is an ODU for ...". I made a cross ref of the word "ODU" to its full name "outdoor unit" in Chapter 2 (in the same book). After this, the word "ODU" in the sentence in Chapter 1 will no longer be a plain text. So I no longer can use the find dialog box to search for "ODU" because it is already an xref rather than text. I am not if it's clear.

How to search for a particular word in a string?

How to search for a particular word in a string?
thanks for your help....

This works fine.
public class Foo {
    public static void main(String[] args) {
    String s = "Now is the time for all good...";
    String s2 = "the time";
    System.out.println(s.contains(s2));
    System.out.println(s.contains("for al"));
    System.out.println(s.contains("not here"));
}output:true
true
falseYou must have something else wrong in your code.
JJ

How to search for a particular word in a long document?

How to search for a particular word in a long document?

What program are you using to read the document?
Good luck.

How to search for a word in an email?

How to search for a particular word in an email in 'Mail'?

You can't search through email content using buil-in search
If you're using Gmail, you can use their native Google Mail app which will allow you to search through body content and server-stored emails.

How to search for password policy

Hello,
Using DS 5.2:
I've created a test policy, dn: cn=Test Policy,ou=People, o=xxx, o=isp. I can apply the policy, I can see the policy in my backup ldifs, but I can't figure out how to search for and display it (and eventually, delete it) either from the command line using ldapsearch or form within the admin gui. Any help?

What I would like to do is query my 8i instance for the current password policy
Can anyone provide a query to retrieve this info?connect as sys
in Oracle 8i and issue the command;
select object_name,object_type from all_objects where object_name like '%PASS%';
and
select object_name,object_type from all_objects where object_name like '%POLICY%';
I think , i'm not sure these policies would be transfered to 10g through migration except -if any- some of them are obsolete to 10g!!!!!
Regards,
Simon

How to search for upper/lower case using string using JAVA!!!?

-I am trying to write a program that will examine each letter in the string and count how many time the upper-case letter 'E' appears, and how many times the lower-case letter 'e' appears.
-I also have to use a JOptionPane.showMessageDialog() to tell the user how many upper and lower case e's were in the string.
-This will be repeated until the user types the word "Stop".
please help if you can
what i have so far:
[code]
public class Project0 {
public static void main(String[] args) {
String[] uppercase = {'E'};
String[] lowercase = {'e'};
String isOrIsNot, inputWord;
while (true) {
   // This line asks the user for input by popping out a single window
   // with text input
   inputWord = JOptionPane.showInputDialog(null, "Please enter a sentence");
   if ( inputWord.equals("stop") )
    System.exit(0);
   // if the inputWord is contained within uppercase or
   // lowercase return true
   if (wordIsThere(inputWord, lowercase))
    isOrIsNot = "Number of lower case e's: ";
   if (wordIsThere(inputword, uppercase))
     isOrIsNot = "number of upper case e's: ";
   // Output to a JOptionPane window whether the word is on the list or not
   JOptionPane.showMessageDialog(null, "The word " + inputWord + " " + isOrIsNot + " on the list.");
} //main
public static boolean wordIsThere(String findMe, String[] theList) {
for (int i=0; i<theList.length; ++i) {
   if (findMe.equals(theList[i])) return true;
return false;
} // wordIsThere
} // class Lab4Program1
[/code]

So what is your question? Do you get any errors? If so, post them. What doesn't work?
And crossposted: how to search for upper/lower case using string using JAVA!!!?

How to search for a fields ?

Similar Messages

Maybe you are looking for