How to see all the reporting variables in BW
Hi All,
Is there any method or table we have in BW to see all the reporting variables
Thanks in Advance!
BW User
hello,
check teh below:
V_RSZGLOBV
RSZGLOBV
fields are:
VNAM - variable name, technical name of the variables
VARTYP - variable types : Characteristic value, Text variables, ...
VPROCTP - Processing type for query variables : Manual entry/default value, Replacement path, Customer Exit
IOBJNM - InfoObject
Reg,
Dhanya
Similar Messages
-
How to see all standard report in sap pm
hi
urgent
can somebody tail me
how to see all standard report in sap pmhi
manoj
youcan see all the reprts in sap
in trs SAP1
OF ALL MODULES
YOU REQUIRE ANY Ifurther information mailme back -
How to group all the reports and execute like single application ?
Hi,
I am trying to develop some reports in Crystal Reports XIR2 , here i have Design and Preview options that is for every report i should see , how to group all the reports and execute like single application?
any option is there to run the report
i mean is it possible to have a home page from there have links to each report and when i click on the link corresponding report should be shown , if it is possible , How?
Regards,
kathyainiYou will want to look into Crystal Reports Server, it does exactly what you describe and more:
http://www.businessobjects.com/product/catalog/crystalreports_server/
Download a trial of CR Server here:
http://www.businessobjects.com/product/freetrials.asp -
How to see all the list of tables in APEX
Hi
COuld anyone of you help me find out how to see all the tables present in APEX ?
I can see all the list of tables when i give the command : select * from tab
But apart from finding like this , is there any way to find out all the list of tables ?
Regards,
TashaHi Tasha,
For Apex 3.2 ;
select * from dba_tables where owner in
(select workspace from APEX_030200.APEX_WORKSPACES)
tab is a synonym for user_tables
http://www.oreillynet.com/pub/a/network/2002/10/28/data_dictionary.html
hope this helps you
regards
mozkavra -
How to see all the tables in ABAP
how to see all the tables in ABAP
i need to see all the tables present in tcode se16.Hi Thiru ,
its tough to give all.so pls see the below links u can get all.
http://www.erpgenie.com/abap/tables.htm
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=listofalltablesin+abap&cat=sdn_all
http://www.guidancetech.com/people/holland/sap/abap/
http://www.sap-img.com/ab017.htm
http://abap-gallery.blogspot.com/
thanks
karthik -
In Layoout how to see all the lead columns presented in that.
Hi Friends,
Could you please suggest me how to see all the lead columns presented in the Layout.
Appreciate your help through points.
Regards,
PJHi Ravi,
When I opend the layout in change mode we are able to see the Layout, when click on continue we can see Header area,lead coulmns,data columns. In Lead columns I am able to see only 20 rows only. But I want to see all rows in that lead columns. When click on continue we are able to see the layout in ALV grid format. In that we can see lot of rows. Now my question is How to see all the rows present in Lead columns. Still if you have any details please give me ur id I will send some screen shots or give ur no. I will talk to you.
Thanks & Regards,
PJ -
How to see all the enterprise services in a Discovery system
Hi,
Please let me know how to see all the enterprise sevices in a discovery system.
Please let me know how to load the enterprise services into webdynpro from discovry system
Thanks and Regards,
Naveen N MHello all,
I can't figurate how to list all the root directories
(C:/> , D:/>, E:/> etc.) in a system.
I know how to recursively check the content of a
directory and all its subdirectories when a
predefined path is defined. However what I' d like to
do is actually give the option to pick one of the
root directories to start the iteration. I have been
looking around but I can' really find anything
helpful.
If any of you has any idea on how to achieve the
above objective some clarification would be really
appreciated.
Thanks in advance for your help!How to installing the Javax.comm package -
How to see all z report t codes
Dear Friends
Can you tell me how can I see all the Z reports developed at a glance? I went to SE38 and pressed F4 in the field I could only see a handfull of T codes but not all..
Thanks
ChandraHi,
Run the T Code Se16 and look for the table TSTC. In the selection criteria give ' Z* '.
This will give you all Z transactions from the table.
Identifying whether its a report or some process transaction, will have to done manually based on the descriptions given in the table.
Hope that helps.
Regards,
Rohit.
Edited by: Rohit Chauhan on Oct 8, 2009 8:12 AM -
How to see all the customers under one company code?
hi,
I would like to know, is there any standard transaction code to see all the customers under one company code?
thanks.Hi,
You can check through :
1). SAP Menu -> Accounting -> Financial Accounting -> Accounts Recievables ->Information Syatem -> Reports for Account recievable accounting -> Master Data -> Customer List
2). Run Txn SE16 -> Enter Table name (KNB1) -> Enter Company Code -> Execute.
Reward Points if this helps.
Regards,
Harsh -
How to see all the extractors(standar or not) used in BW system
Hi experts,
As requirement of our users, they ask us show them all the list of extractors used in our systems. I thoguht that we can check the flows one by one but they are so many. there is another way to see all the extractors used?
I checked in the matadata reposirory but they aren't there..If you can help me would be great.DataSouces tab in RSA1 may be useful to you.
You can see all the data sources available for BW system here. One thing you need to keep in mind is that you may find some data sources here which are not used in any flow, such data sources will not have an arrow for expansion before them.
Regards,
Gaurav -
How to see all the PO payment status with searching field project defin.
Dear all experts,
could you help me on the following issue?
In a large capital project, there are many POs, and all the POs are paid partially
for example, down payment 30%, 30% when the machine is received, 30% when the machine is commissioned, 10% is for warranty after a year.
how can i see the all the POs payment status with searching field project definition. for example, i have paid how much for which PO. i want to see the list by searching the project definition.
is it possible to achieve? or how can i do it?
Please share your opinion or give me some suggestions.
thanks a lot.
Judythanks for all of your replies.
i have activated FM. and i have a PO triggered by the project.
i enter the down payment for the PO using F-48.
i can see the down payment in the PO history.
but i can not see it using the committment item report, such as CJIA
is it correct or not? do i need to change something?
thanks a lot.
Judy -
Report : How to show all the reports in Content Management
Hi,
Can anyone tell me how I can show the "Resource Locks" Report in Portal.
I can see 4 reports through Content Management -> Reports i.e. Approval Maintenance, Link Consistency, Resource Statistics, Time-based publishing.
If I want to add more reports over here than "How I can achieve it".
Also I have seen the settings System Administration -> System Configuration -> KM -> CM -> Repository Managers -> Reporting Repository
But here I find no combo box for Active Reports, so from where I can activate the reports and show them in Content Management -> Reports
Please help me.
Regards
DeepDeep,
Are you talkign about the report which give you details of which Portal Objects are currently locked?
If yes, then you can go to System Adminitrator > Monitoring > Object Locking
Hope this helps,
*Points will be appreciated. -
How to see all the columns in the spool output of an ABAP program
I have an ABAP program which displays all the columns when I run it manually. (by scrolling to the right using right arrows). When I run that report in the scheduler and when I see the output in the spool in transaction SP01, it does allow me to go to the right to see all columns.
thanks
RamCheck OSS Note 409339 - Spool requests with ABAP lists with more than 255 columns.
Summary
Symptom
As of Release 4.6x, the ABAP list processor can create spool requests for ABAP lists with a width of more
than 255 columns. However, when you print using the SAP spool, only the start of the list lines is printed,
the rest of the line is truncated at the end of the page.
Other terms
ABAP, lists, print parameter, LINE-SIZE
Reason and Prerequisites
Creating "wide" lists on the screen (in other words, lists in the SAPGUI with more than 255 columns) was
already introduced by the ABAP list processor for Release 4.0B. However, before Release 4.6 these lists
cannot be printed out in the width used on screen.
In older releases (for example, 4.0B, 4.5B), you were not able to generate spool requests for lists with a
width of more than 255 columns:
The system issues error message PT 026: "No. of columns > 255, no standard print-out possible".
Therefore, we did not have the problem described here of non-existing device-type support in 4.0/4.5 for
printing out "wide" lists.
Up to and including 4.6C there are no SAP device types that support print formats for lists with a width of
more than 255 characters). Since Release 3.0A, all SAP device types support a maximum list width of 255
characters with device format X_65_255.
Solution
When you create the spool request and a print dialog box appears, enter a column width of maximum 255
in the "Number of columns" field.
As of Release 4.6D, you have the option of using device type SWIN with the new format X_65_1024/4 when
printing with Windows (see Note 213382). -
How to see all the table contents in SM30
Hi All,
I have created a Z-table. In that records are stored based on the dates.
Suppose :
The fields and their values in the table are as below,
Field1 Field2 Field3
A 22/02/2008 31/12/9999
A 12/01/2006 21/02/2008
B 10/11/2007 31/12/9999
B 27/05/2006 09/11/2007
But in if we go in SM30 transaction, it is showing only recent records i.e.as below,
Field1 Field2 Field3
A 22/02/2008 31/12/9999
B 10/11/2007 31/12/9999
Please tell me how can I get the full contents of the table in SM30.Hi suman,
Is this Ztable is created by you or someone else
Because while creating the Table maintainence, they might have created a logic at events in table maintainence as
(at new) statement.
So while displaying it is picking only the first record with Primary key. please check it.
REward me if helpful. -
How to see all the data base tables in sap
hi all,
i wanted to see the table ALBTCMON but i cannot and i want to know how to activate a table?
thanks for your time
chanduHai,
Why do you want to create a Table?
More over the table ALBTCMON you have mentioned should not be created because SAP allows only Tables with names starting with 'Y' or 'Z'.
Also you should know the fields, Developement class, etc., before creating the Table in SAP.
Please check the below link to create Table in SAP.
http://abaplovers.blogspot.com/2008/02/creating-table-in-sap.html
Use Tcode SE11 to activate your table.
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Dec 29, 2008 12:15 PM
Maybe you are looking for
-
I have a 13" Macbook Pro running OSX 10.8 and when I tried to update to 10.8.1 through the Mac App store it didn't acknowledge that there was an update available so I went to the apple website and manually downloaded the update. When I attempted to u
-
Content Administration Tab is missing for administrator user in NW CE 7.1
we have a issue after upgrading the portal to NW CE 7.1 SP00 RTC. "Content Administration" Tab is missing for administrator users
-
I just purchased battery saver app on my torch 9860 through my credit card worth rs. 100 indian rupees. And I had to add my credit card details in blackberry world for that purpose, my problem is that there were two amounts deducted 103 and 100 respe
-
Legacy asset deletion after AS91
Hi All, How to delete few assets after loading thru AS91. ( As 60 records are duplicated Input file issue- Basically I dont want to delete all 9000 records ) Tcode AS06 does not allow me to delete with a message values are there. The SAP message is c
-
How to start a new listener in 11g
Dear all, i am doing internal test upgrade of a 9.2.0.8 database to 11.2.0.1 as a part of 11i to R12 up gradation. Right now i am in the database part(Manual Upgrade), and following the Metalink doc :837570.1 I have completed the "Upgrading Database