How to see data in the multi-provider ?

We have a multiprovider with the key figure as total stock, and its given as a non-cumulative kf which has a check mark next to it. Its getting data from the infocube to it, I mean there are 4 infocubes and 1 ods to the multi-provider. If I right click and see the infocube or the multi-provider and select the fields by rite click and I am unable to see the total stock kf. But if I click the actual multiprovider and click display instead of display data, I am able to see the keyfigures folder, if i expand that I see stock quantity folder and many other folders. If I expand stock quantity folder, there are 3 kf's ztotalstock, 0isstock and 0recstock. In those ztotalstok is non-cumulative checked. And I am unable to see the kf value when i rite click on the mp. So any suggestion to display the data by selecting a posting date in the mp. What my guess is , will there be any internal table/view to display the mp data. Please let me know any suggestions.
Thanks for your time,

Prasanth, entering the mp name in LISTCUBE is same as right click on the mp and click on display data, where it will give the selecting criteria for the fields. But here both will display the same fields, that is not my case. I am unable to see one of the key figure which is inside the mp, have you opened any mp. Please right click on it and choose display and then go to the key figures folder , if you open that you have lot of folders in it based on the category. IN my case its the stock kf folder and if you expand that there are three kf's out of the three, one is ztotal stock which is declared as non-cumulative kf, rite next to it, option is checked. So I think that is the reson we are not able to see ztotalstock kf , no matter in the listcube or display data option on the mp. Hope you got my situation. I know how to see the data in the multi-provider or infocube. But in this case its not displaying that ztotal stock keyfigure, but in the reporting we can see the data on the mp. My question is why am I not able to see the selection for that ztotal stock key figure , either in listcube or rite clik display data option. Did anybody face this situation.
Thank You,

Similar Messages

How to split the Multi Provider

HI All,
Please give me the steps How to split the Multi provider and also let me know how to find the multi provider is parellal or series?
Thanks
Vasu.

Hi
If you have huge volumes of data, logical partitioning (splitting into multiple data targets based on a time characteristic) is always recommendable. You can choose to so only for the cube (split into 3 cubes) and have the suitable code when loading from the ODS's.
Else you can split the ODS's as well and have the code in the update rules from source system to the ODS's. Either ways, once you choose to split...you have no choice but to use a multi provider to report on these splits.
During the execution, query is automatically multiple sub queries and these sub queries read the partitioned cubes in parallel. This would increase the performance of reports. Hope this helps!
http://help.sap.com/saphelp_bw31/helpdata/en/de/bcb73d73a5f972e10000000a114084/content.htm
santosh

How to insert data to the specified row column of the multi column list box

Hi All
How do i insert data into the specified column of the multi cplumn list box?
I have a table that containsall station nos and name.Then another table contains the data the various stations having at for 24 hrs.That is 12 am to 11 pm.
And i want to display each stations details as follows using a multi column list box/table
My stationinfo table
stnno   stnname......................
s1           stn1
s2            stn2
s3             stn3
The other table
stnno      sysdatetime       data
s1             12am                   1
s2              12am                   4
s1               1 am                 2
So the station s1,s2.... will have data for 24 hrs.
And i want to display it as follows using a multicolumn listbox
stnname        12am   1 am ......................................11pm
s1                   ...................
s2                 ........................
What i have in my mind is to get all station nos
and in a for loop get the station's data from 12 am to 11 pm
or
select every statios data for each hor.But in this case i have to query the database 24 times.So i dont think its a good way.
Or any other better query available?
Can anybody suggest me a good idea?
One more thing...how to insert data into the specified field row or column of a multi column list box?
Thanks in advance

hi
i want to know,,can u say ur need clearly...and i attached two image u see that one
Indrajit
| [email protected] | [email protected] .
Attachments:
station.JPG ‏35 KB
station2.JPG ‏79 KB

U0094Generate Export data Source" form multi provider.

Hi,
If we give the context menu to the multi provider we get an option that Generate Export data Source. That means is it possible to generate the data source from multi provider. If yes , then we will load data from one multi provider to another data target.
How can we see the data in Multiprovider.
Regards,
Venkata Sharma

A Multiprovider has no storage of data.
But you use a query build on top of it, and see the data from the Datatargets that are used on that Multiprovider (can be cubes, info-objects, info-sets).
I am working in BI 7.0 and I don't have the option of generating the export datasource!
Hope it's clear now.

Unable to see data in the report or workbook

Hello All,
We are struggling to display data in the report level or workbook, however the data is available in Multiprovider.
Error Message: "No Applicable Data Found"
Steps Carried Out:
1. Dropped the BIA Indexes for relevant cubes and Reactivated the Multiprovider, still did not work.
2. When we checked for previous years like 2013, we are able to see data in the report. To elaborate an issue, we loaded budget data for year 2015 as requested by user. Restricted the same filters from the Query in the Multiprovider and able to see the data in the backend, however not data can be seen in the Report.
3. Three Hierarchies are restricted in the Filters of the Query.
It would be great, if any of you can help us to fix the issue.
Best Regards,
Sudhakar

Hi,
Have you used any exists?
in exists is there any system date kind?
Can you try to run your report thru RSRT and use debug option there.
before reporting please check your all connected targets have data for reporting.
mean at targets-->request tab, reporting symbol was there or not.
Any master data objects included in multi provider?
if yes then please check those, if any ACR was running then it may cause you.
if possible try to develop simple query with as per needs(mean to see 2015 data only).
As my guess selections/filters migth be hidden, please check those.
Thanks

How to insert data into the mysql table by giving as a text file

Hi,
Any one know's how to insert data into the mysql table by giving as a text file as the input in JSP.Please respond ASAP.
Thanks:)

At least you can try StringTokenizer to parse your text files. Or download a text JDBC driver to parse your files, for instance, HXTT Text(www.hxtt.net) or StelsCSV(www.csv-jdbc.com).

How to process data in the past based from data in the present

hello guys,
i have a problem in my labview programs. how to process data in the past based from data in the present ?
i have a formula self-organizing maps
this formula is looking for D1, D1 is neuron index that will be searched for the smallest value.and the result are D1=2 ,D2=5, D3=17 from calculating with formula .it means the smallest value is 2, "2" from weight [2 2] in file attached.
and then it will be in other formula
it mean [2 2] + 0.5 ( [1 1]-[2 2] ) = [1.5 1.5]
and the weight will be [1.5 2 2 ] in matrix
1.5 3 5
I would appreciate any input/help on solving this
thanks
Attachments:
dika.vi ‏16 KB
weight.txt ‏1 KB
data .txt ‏1 KB

Hi Ronny Hanks,
Moving your records from internal table into the database table depends upon various scenarios :-
1. If you use INSERT statement.
INSERT <database_table> FROM TABLE <internal_table>.
But in this case, you need to make sure that you don't have any duplicate entries in your internal table that violates data entry into database table, else you will get a dump.
INSERT <database_table> FROM TABLE <internal_table> ACCEPTING DUPLICATE KEYS.
In this case, you are forcefully inserting duplicate records into your database table which may lead to data redundancy in your database table.
2. If you use UPDATE statement.
UPDATE <database_table> FROM TABLE <internal_table>.
This will update the existing records in your database table from the internal table.
3. If you use MODIFY statement.
MODIFY <database_table> FROM TABLE <internal_table>.
This statement works both in combination of INSERT & UPDATE statements.
Existing records (in database table) will be eventually updated/modified and new records (not in database table currently) will be successfully inserted into the database table.
Hope this solves your problem.
Thanks & Regards.
Tarun Gambhir.

How to download data from the icloud?

How to download data from the icloud?

Settings>General>Reset>reset all content and settings. When iPhone restarts you will guide to restore from iCloud backup

How to see data modeller reports in sql developer?

How to see data modeller reports in sql developer?

1) export your design to existing schema in Oracle database
2) define connection to that schema in SQL Developer
3) find "Data Modeler Reports" in reports window of SQL Developer - probably "design rules" are more interesting here
Philip

How to get data on the next page in case of templates if data is more ?

please tell me how to get data on the next page while i m using template in my first page , if data is more howw it can be displayed on the next page ?

HI Asim,
template is fixed we it can't be expand . u can better to use table line it can automaticlly expending if data is more ... u can create one more page like page 2 and create a window for entire second page ..then assign it in first page (next page page2).
regards
kiran kumar.

How to get data with the raw pattern from resultset ?

would you tell me how to get data with the raw pattern from resultset ?
thank you in advance!
longgger2000

I tried getBytes() and getObject()
, but I can not get the right result , for example the
data in oracle database is 01000000DFFF, when In used
the method of getBytes() and getObject(), I get the
result of [B@1c2e8a4, very different , please tell me
why !
thank you
longgger2000
[B is byte arrayseem that it return an bytes array for you.

How to acquire data from the memory of multimeter

I am a beginner of Labview. I don't know how to acquire data from the memory of multimeter.
I read some examples about DAQ, but it seems not similar to my case. I can't use DAQ in my computer, as I don't have DAQ board.
Could anybody give me some guide? Similar examples would be great.
Solved!
Go to Solution.

Confirm that you have the VISA Run Time Engine on the target machine. If you do not have it installed, you can install the VISA Run Time Engine from ni.com.
Error -1073807346 Using VISA When Running LabVIEW Executable On Target Computer
Message Edited by Mathan on 10-12-2009 07:11 AM

How much Image Data can the Scenegraph hold? handling big pictures?

I have some jpg pictures that are taken with a standard compact camera.
Pictures are around 2MB in size. I would like to load them full size so I can Zoom into them later.
I can load about 4 of this pictures (total 8MB data), but not 5 of them.
Where is the limitation?
How much Image Data can the Scenegraph hold?
any tweeks or workaround for big pictures?

You mean this:
The default maximum heap size is half of the physical memory up to a physical memory size of 192 megabytes and otherwise one fourth of the physical memory up to a physical memory size of 1 gigabyte.
For example, if your machine has 128 megabytes of physical memory, then the maximum heap size is 64 megabytes, and greater than or equal to 1 gigabyte of physical memory results in a maximum heap size of 256 megabytes.So Java doesn't want to use a lot of ram by default. My 3 Year PC has allready 4 GB Ram. But well there are laptops with 1 or 2 gb RAM. Even my 5 year old video-pc, only there to watch some movies, has 1.2GB RAM. So Whatever, maybe Oracle will change this in Java7 or 8. As well also Anyway, i can do make the a little bit more effiecient, but if someone want to load a jpg captuared with a 12MegaPixel Camera, you just need some Ram.

How to read data from the data provider using javascript

Hi,
Please let me know how to read the data from the dataprovider using javascript(query assigned to the data provider).
My query has filter charateristics, free charateristics, charateristics in rows and key figure in column.
Thanks a lot for your kind help
Regards
Kandasamy

Kandaswamy,
Assign an ID to your table item , then in JavaScript , you can use ID.innerHTML and you will get the HTML code within that table for the same , then you can find out how best to get the exact value you desire from the innerHTML value which is a string with the entire HTML from within the table item.
Arun
Hope it helps....

How to see where all the master data is being used

Hi Gurus:
How to see say master data XYZ is being used in ODS, IC...ETC
Thanks & Regards

hi MK K,
to check the characteristic value is used by which infoproviders, you may try
rsa1->infoobject->choose the characteristic->'master data maintenance', select the row for that characteristic value, and button 'delete' (trash icon) and 'save', you will get a message 'master data cannot be deleted'.
transaction slg1, object RSDMD, subobject MD_DEL, and execute, in next screen double click the top node, you will see the log, message text in below panel, e.g 'master data xyz(SID xxxxx) is used in /.../...'
xyz = characteristic value
/.../... = table name, can be dimension table of infocube, e.g /bic/d[infocubename]x, then you know which data target used the value.
hope this helps.

How to see data in the multi-provider ?

Similar Messages

Maybe you are looking for