How to see FAT32 in solaris8 for x86!!
how to see FAT32 in solaris8 for x86 ,thanks a lot!
Refer man "mount_pcfs" for more information.
Hope it helps.
Senthilkumar
Developer Technical Support
Sun Microsystems, Inc.
http://www.sun.com/developers/support
Similar Messages
-
How to see the change logs for billing document
Dears,
Could you please how to see the change logs for billing document.
My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
Thanks in advance
Ranjanhello, friend.
you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes. try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document, as saving the document after creation will post this to Accounting. of course, inclusion of a posting block in the billing type will provide you the opportunity for changes.
regards. -
How to see the changes made for iPad in iTunes on my iPad?
How to see the changes made for iPad in iTunes on my iPad? I've been transferring some pdf-files and changed the name on them in iTunes under the index books for my iPad device, but the changes do not show in iBooks-PDF. What to do?
Yes I tried syncing a lot of times, but the changes still wouldn't show, so I did as you said by beginning from the start by adding the PDF's once again.
Thanks for your help, it works now :-) -
How to see the material document for Blocked stock
Hello Experts
I having some blocked stock in plant X , How to see the material document for this stock.
Thanks in Advance
Prashanth.v
Edited by: prashanth.venkategowda on Aug 11, 2010 7:38 PMwhich material documents do you want to see?
Material documents can be found and displayed in MB51 transaction.
in MMBE you can put the cursor onto your stock line and then choose from menu Environment > material documents and SAP will list all relevant material documents.
block stock status is not a selection criteria, material number, plant storage location, batch number are selection criterias.
if you want only documents to block stock, then you need to select by movement type, e.g. 343 and 344 are movements that change status from unrestricted to blocked or vica versa. -
How to see the group membership for a user in oidadmin
how to see the group membership for a user in oidadmin?
I see the memberships in oiddas, but I would like to know if its possible to see them in oidadmin? Thanks.Hi,
For what I understand, you know the user and want to know the groups that the user is member of (am i wrong?)...
With this query you pass the user's DN to the ldapsearch and the search gives you back the list of groups the member is a member of, all you need to do is change the value "uniquemember=cn=orcladmin" in the query for your own user.
For example:
$ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=orcladmin" dn
will give you the list of groups that the user "cn=orcladmin" is a member of.
$ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=smithj,cn=Users,dc=acme,dc=com,dc=au" dn
will grive you all the groups that the user smithj is a member of.
if you don't want to get the DN of the group you can change the last parameter of the query like this
$ORACLE_HOME/bin/ldapsearch -h localhost -p 389 -D "cn=orcladmin" -w oracle10g -b "dc=acme,dc=com,dc=au" -s sub "uniquemember=cn=smithj,cn=Users,dc=acme,dc=com,dc=au" cn
will give you the CN of the groups the user is member of.
let me know if this is what you need.
Regards,
Juan -
How to see output in GTS for Customs documents
Hi experts,
could you please let me know how to see outputs for customs documents like origin of certificate for US. (ex: like in SD to see order output VA02 then goto issue output)
let me know the Path or Transaction code to see output on system.
Regards
ReddyHi
Follow the path:
Customs Processing - Import/Export>Monitoring>Customs Import/Export Declaration>Display Available Customs Export/Import Declaration>Communication Tab
Or try
T-Code: /SAPSLL/CL_CUS_03
Check for Certificate of Origin
Regards
Vivek -
How to see the Container log for debugging in netbeans 4.1
Hi All
I am using the netbeans 4.1 with sun applicaion server 81. as my applicaion server. I have developed one ejb module and deployed it in server. Now I want to see the EJB container log for knowing how my beans methods are being called at the time of execution. Can any one please help me on this.
Thanks
Ranjan Rashmi Sahoo.
Mphasis BFL Ltd, Bangalore.
IndiaCould you tell me how to see the logger?Search for Log4J. It has a good documentation IMO.
-
How to see the data records for a dso based upon the request id?
Hi all,
How to see the data records based upon the request id on the dso.
I need to see the data for a dso based upon the request id 444493 loaded from another dso through repair full update.
thanksHi,
Step 1: select your request from DSO request tb
Step 2: Select your DSO just above your contents/requests/reconstruction tabs
Step 3: Click contents(Spectacles symbol) in the top area of your screen
Step 4: Slect the required fields
Regards,
Suman -
How to see all statuses maintained for campaigns in Customization.
Dear all,
Where can we see all statuses maintained for Campaign in Customization.
Under Basic Data in Campaign Screen, I can see Open, Approved and Released campaigns but when I search for these campaigns in customization, I couldn't find.
Where we are maintaining these statuses and how we assigning it to the Campaign Object.
Your suggestions will be highly appreciated.
Best regards
Raghu ramHi,
I have checked there(Transaction CRMBS02), but I can not see the system statuses over there.
How can I see the following system statuses visible in campaign-->Basic Data Screen.
Created
· Released
· Finished or Rejected
· Locked
· In Process
· Approved
Your help will be highly appreciated.
Best regards
Raghu ram -
How to see the sequential file for which data is uploaded.
hi experts,
here iam transferring data to application server.
just chk the code once...
the output is sucess.
in al11, in temp iam not in aposition to find this data. how to see it.
open dataset dsn for output in text mode encoding default.
if sy-subrc <> 0.
write :/'dataset cannot be open'.
else.
loop at it_upload.
transfer it_upload to dsn.
endloop.
if sy-subrc = 0.
write :/'sucess'.
endif.
close dataset dsn.
endif.What is the value of the variable 'dsn' (i.e. the filename?).
If it uses directories (i.e. something like "/dir/dir/dir/filename"), you shouldn't look at the temp but follow the path that the variable 'dsn' has.
If there is no path in the filename 'dsn' it usually is defaulted to the temp directory (DIR_TEMP ("/tmp") or often DIR_SAPUSERS "./"). If the filename doesn't show up in either, check your BASIS people.
Remember though, the filename is CAPS sensitive the the name "filename" and "FILENAME" are seen as <i>two different names</i> and will show up at different places in in the directory (iirc CAPS are first before lowercase). -
How to see option bellow Troubleshooter for Conversion Objects menu
Hi,
How can I use this procedure if i dont see nothing below "Troubleshooter for Conversion Objects" menu.
Procedure
Access the troubleshooter "Troubleshooter for Conversion Objects" which is assigned to the activity "Start Data Transfer". You could either
use the Auto-Determination-Modus. All objects which need to be generated again will be determined and regenerated. Please note that the auto-determination-mode might also find other objects which need to be regenerated because settings were changed
use the Force Redefinition Mode and enter all objects for which you changed the reading type
Affter regenerating the objects you could continue with the data selection and data transfer.It appears that you have some inconsistencies in the customizing. Try to upgrade to the latest SP of TDMS. If that doesnt help create an OSS message to SAP.
-
How to see top liked content for different period?
On any space you can only see top liked content for one month. What if I want to see top liked content for whole year or for 2 years?
Is there any option where I can choose?
Some contents are very useful but they got lost in all other discussions.You can't do this in the space's content tab other than scrolling through and looking for the content items with the most likes. What you'll have to do is use an alternative site search engine SCN has and then sort the content by likes.
Go to http://scn.sap.com/search.jspa
Search for sap (there's no search wildcard available but "sap" appears on just about all SCN content, so does "a")
Then select Sort by = Likes
Other filters:
The default is anytime (all time) but you can narrow this down to past day, week, month or year. However, the total number of all time likes will always be displayed!
Search withing specific spaces ("Restrict to a Group or Space:") and content type ("What:")
You can also sort by ratings
For examples, here's a query for the most likes blog posts in About SCN over the past month: http://scn.sap.com/search.jspa?view=content&resultTypes=blogpost&dateRange=last30days&q=sap&rankBy=likes&contentType=blo… -
How to see different views created for material
hello sap gurus
How to see, under which all views the material has been created?
Points will be given
Thanks in advance
VijayHi
The no of views to be opened when you create a material in MM01 depends on the Material type
BY changing the material types the views can be changed
IMG->logistics general>Material Master>Basic settings>Material types-->Define attributes of material types
Here only the settings is done
Raja -
How to see the changed output for purchase order
Hi..
I have zmedruck. i need to increse item text lengh. i done this in editor. how to see the changed output now...I increased the length of text to be displayed. I checked the print preview in me23n. i cant see the increased length. Guide me where i am wrong.
Edited by: Meena 303 on May 1, 2008 6:24 PMHi
In ME22N go to message -
> select old message -
>click change OutPut button -
> Save
then see print priview through ME9F or ME22N it sself.
regards
Sachin -
How to see the dropdown option for field of a table during selection
Hello,
I am adding a new custom field in the table. Now when user goes to the screen after clicking the content button icon in se11, he sees all fields for selection.
That custom field is one character field. I want the user to see P and S option when he hits F4 (Dropdown).
How can I achieve this ?
Regards,
Rajesh.hi check this..
report .
TYPE-POOLS : vrm.
TABLES:vbak,vbap.
DATA : v(80) TYPE c.
DATA: wa_vbak TYPE vbak,
it_vbak TYPE vbak OCCURS 0 WITH HEADER LINE,
wa_vbap TYPE vbap,
it_vbap TYPE vbap OCCURS 0 WITH HEADER LINE.
DATA: l_name TYPE vrm_id,
li_list TYPE vrm_values ,
v_count TYPE i,
l_value LIKE LINE OF li_list.
PARAMETERS: p_test(20) AS LISTBOX VISIBLE LENGTH 60 MODIF ID DAT.
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
PERFORM get_data.
LOOP AT it_vbak.
l_value-key = it_vbak-vbeln .
l_value-text = it_vbak-vbeln .
APPEND l_value TO li_list.
ENDLOOP.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING
id = 'P_TEST'
values = li_list
EXCEPTIONS
id_illegal_name = 1
OTHERS = 2.
AT SELECTION-SCREEN ON P_TEST.
clear : li_list , li_list[].
SELECT vbeln
matnr
meins
FROM vbap
INTO CORRESPONDING FIELDS OF TABLE it_vbap
WHERE vbeln = p_test.
START-OF-SELECTION.
SELECT vbeln
matnr
meins
FROM vbap
INTO CORRESPONDING FIELDS OF TABLE it_vbap
WHERE vbeln = p_test.
LOOP AT it_vbap.
WRITE :/ it_vbap-vbeln, it_vbap-matnr,it_vbap-meins.
ENDLOOP.
*& Form get_Data
text
--> p1 text
<-- p2 text
FORM get_data .
SELECT vbeln
FROM vbak
INTO CORRESPONDING FIELDS OF TABLE it_vbak.
ENDFORM. " get_Data
regards,
venkat
Maybe you are looking for
-
Need help with MacPro mail and sending email currently not functioning.
-
Oracle SQL Developer 1.2.1
I can't modify values in SQL worksheet view. I have all the correct privileges but my data grids remain uneditable ?? Does anyone know why my data grids are not modifiable ?
-
Customer Master Fields for LSMW (Only FI View)
Hi, We are implementing SAP FICO at one of our clients' site. They are not implementing SD. Can anyone tell me what are the minimum required fields for creating a customer master? Even if you give the table name whwere I could get this info, thats gr
-
i have a login UI , when i clich on change password it opens a JDialog , i am passing 2 parameters with the call, the username and the login frame object , In the constructor of Jdialog class i am again taking 2 parameters , the username and the fram
-
I am doing some retouching work on a portrait to remove/minimize wrinkles around the subject's neck. I am utilizing a lighten layer and darken layer with the clone stamp set to a very low opacity to affect only those areas. I would like to set the so