How to see the historic data of CAT2

Dear All,
I have a question related to CATS.
Through which table I can get the historical data of an employee which is stored in CAT2 transaction. I tried through CATSDB but not able to get the number of working hours as stored in CAT2.
I clied on a field of CAT2 and checked the technical details. there I found the table name CATD but when I run SE11 and enter this table name, it display it as a sturcture not as a table.
Please provide your help in this regard.
Regards,
-Neha

Maximum NUmber of Columns allowed is 1023. So if there are more data than that, I am afraid there is no way to see them all in one screen.
the better thing to do is to use the Settings>Format List>Choose fields option from the selection screen of SE16 to just choose the fields which you want in the output.
It is highly unlikely that you are using all the 100 fields so you can very well hide a few of them with no impact on your output.
As someone else has suggested using a report such as CATSXT_DA will defintiely be a much more useful way of viewing all relevant fields from CATSDB.

Similar Messages

How to extract the historical data from R/3

hi
I am extracting data from R/3 through LO Extraction. client asked me to enhance the data source by adding field. i have enhanced the field and wrote exit to populate the data for that field.
how to extract the historical data into BI for the enhanced field. already delta load is running in BI.
regards

Hi Satish,
As per SAP Standard also the best way is to delete whole data from the cube and then load the data from set up tables as you have enhanced the data source.
After data source enhancement it is supported to load normally because you don't get any historical data for that field.
Best way is to take down time from the users, normally we do in weekends/non-business hours.
Then fill the set-up tables; if the data is of huge volume you can adopt parallel mechanism like:
1. Load set-up tables by yearly basis as a background job.
2. Load set-up tables by yearly basis with posting periods from jan 1st to 31st dec of any year basis as a background job.
This can make your self easier and faster for load of set-up tables. After filling up set-up tables. You can unlock all users as there is no worries of postings.
Then after you can load all the data into BI first into PSA and then into Cube.
Regards,
Ravi Kanth.

How to see the authorization data of a user in Web Dynpro ABAP

Hi all,
if I have authorization problems in a normal SAP transaction I can use transaction SU53 to see the missing authorization objects.
How can I get the missing authorization objects for a Web Dynpro ABAP application?
regards

What about using SU53 again - just log into ABAP system and use the F5 - "other use"r option to select the user having the issues.
There is unfortunately no way to see this as standard from the WDA application.
Sorry,
Chris

How to see the last date of user modification , modify type etc......

Hi All,
We have installed EP 6.0 ,is there any out to get the details of changes made to a User/User account in the Portal like the following things :
- last modified date.
- modify type.
- modifyed by.
Secondly is there also any method tro get the following details on Portal for any user account :
- someone changes the validity dates of a user.
- updates Roles/Groups to a user.
- deletes a user. etc.,
PLZ revert back at earliest , i need this info at earliest.
With Regards,
Saumya

Hi,
Enable security log as mentioned in the below URL.
http://help.sap.com/saphelp_nw2004s/helpdata/en/a0/58db515b95b64181ef0552dc1f5c50/frameset.htm
This would capture all the creation/modification/Deletion of users, groups and roles objects.
The above log will be stored in ......log/system/security.<n>.log and can be viewed with the LogViewer
Hope this would be helpful.
Regards,
Birla.

How to see the datas stored in DBMS_SQL.Varchar2S variable?

how to see the datas stored in DBMS_SQL.Varchar2S variable?
it says error if i use dbms_out.put_line.

in PLSQL :
procedure p_try (p_test IN OUT DBMS_SQL.VARCHAR2S) is
begin
    p_test.delete ;
    p_test(    -3000) := '===============' ;
    p_test(       22) := 'Hello' ;
    p_test(    55555) := 'World' ;
    p_test(987654321) := '===============' ;
end p_try;
set serveroutput on
declare
     l_test dbms_sql.varchar2s ;
     i number ;
begin
     p_try (l_test) ;
     i := l_test.first ;
     while i >= l_test.first and i <= l_test.last loop
             dbms_output.put_line (l_test(i)) ;
             i := l_test.next(i) ;
     end loop ;
end ;
===============
Hello
World
===============when using Forms, you would use TEXT_IO instead of DBMS_OUTPUT

How to see the data records for a dso based upon the request id?

Hi all,
How to see the data records based upon the request id on the dso.
I need to see the data for a dso based upon the request id 444493 loaded from another dso through repair full update.
thanks

Hi,
Step 1: select your request from DSO request tb
Step 2: Select your DSO just above your contents/requests/reconstruction tabs
Step 3: Click contents(Spectacles symbol) in the top area of your screen
Step 4: Slect the required fields
Regards,
Suman

How to see the GL Accounts balance carry forwarded date

hi gurus
can you help me, how to see the date of last GL accounts Carry forwarded?
thanks in advance
amk

That information will not be any use.
You can carry forward any number of times - the last should be after closing of previous years accounts.
Hope it is clear.

HOW DO I SEE THE LAST DATE I BACKED UP ON ICLOUD

How can I see the last date that icloud was backed up?

Go to Settings>iCloud>Storage & Backup and look at the very bottom under Back Up Now.

How can i see the storage data on my icloud

how can i see the storage data on my icloud

If you mean to see how much is used and available:
Settings > iCloud > (scroll to bottom) > Storage & Backup > Total Storage, Available, Manage Storage >

I am new to Photoshop Elements. How can I see the exif data of my photograph?

I am new to Photoshop Elements. How can I see the exif data of a photo?

I have Elements 10. Sorry I am really struggling with the programme and I
dont see the word Menu anywhere on the editor screen.
Rev. Dr. Jill Morley
PO Box 51059
Musgrave Rd.
Durban.
[email protected]
0837791978 (c)
0312080473 (h) and (f)

How to see the content once I submitted the data in the form

Hi,
I have used webform editor to create a form and I have embedded some idoc scripts. Once I submitted the data to the content server through the form how will I able to see the submitted data again. Is it possible to see the data in html format...when I open the weblocation of hcsp pag, I can see only title , I am not able to see the title I entered n submitted
Edited by: user10755799 on Jan 27, 2009 5:14 AM

I checked my coding again in debug mode. I cannot find anything wrong.
I duplicate here my coding again.
   DATA lo_attachment TYPE REF TO if_ai_attachment.
lo_attachment = lo_attachment_protocol->get_attachment_from_binary(
                      data = iv_attachment_content
                      type = iv_attachment_mime_type
                      name = iv_attachment_name
* set the attachment
DATA lt_attachments TYPE prx_attach.
APPEND lo_attachment TO lt_attachments.
lo_attachment_protocol->set_attachments( lt_attachments ).
The local variable LT_ATTACHMENTS has field payload-resource with the following expected values --
KIND : B
TYPE : application/msword
BINDATA : 00530068006F00740073005F0073007700630076002E0064006F00630020002000
The BINDATA correctly contains the dummy data I assigned.
I must have missed something. Can someone help?
Best regards,
-Michelle

Reload for the historical data

Hi All,
I have an R/3 extractor '2LIS_04_P_ARBPL' which loads deltas everyday. Some time back on 16-06-09, masterdata(ZRESOURCE) was changed. Since then delta loads have happened & the extractor has fetched proper transaction data for the changed masterdata i.e. for the new resource. But for the prior period to 16-06-09, it still refers to the old resource. But the client wants that the transaction data of the prior period should also refer to the new (Changed) resource.
Pls advice me as to what I should do. Delete the existing data relating to the prior period & reload the historical data? If so how should I go abt it? And any precautions as its a delta load.
Thanks & Regards,
Shreesh.

Hi Shreesh,
We face similar kind of situation too. Example of such master data change is PL/PC reorganization.
In these case if any field are picking value from master data then master data present at the time of loading will be updated in cube and in future if master data change,you will see both old and new values in cube.
Solution for this is :-
1) try to make the client understand by explaining the whole scenario, client may get convinced.
2) Do selective deletion and load again data in cube
3) don't store values for that field in cube instead make the field as navigational attribute in cube, if you do this then value present at the time of execution of report will be displayed in report output.
Regards,
Saurabh

How to see the Open PO Qty in Mass

Dear Experts,
How to see the Open Qty in PO in mass, is there any report available..Please help
Regards
karthik

use the Txn ME2N
Enter the follwoing details . Scope of list - ALV, Selection parameters- WE101, Plant- XXXX, Enter the document dates From and TO and execute ( F8), You will get all the details, If you want to adjust the format use cntrl+F8 to get the POP_up for selection of fields and use as you wish.

How to Get the Current data into Planning Layout from the Planning cube

Hi,
I have a problem in BPS.   I am selecting the data from cube based on Month org details but I want to see the latest data.   How can i get this data into planning cube.
Like
data
Tran           cal month            org               amt
1                 jan                        a                  100
1                 feb                        a                   200
if i want to read based on Tran org as input values I shoud get the below data but I am getting the previous data.
Tran           cal month            org               amt
1                 feb                        a                   200
Kindly help me in this regard
Thanks
Naveen

Naveen,
    Are yo having issue when you save something in the layout, the data doesn't appear in the listcube ? Or do you have issue that the latest data you see in the cube doesn't appear in the layout ?
For the former issue, please look at your selections of listcube and for the second issue, please check your planning level definition, make sure all the restrictions you have applied are valid for this latest data to be presented in the layout.
Hope this helps.
Cheers
Srini

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

How to see the historic data of CAT2

Similar Messages

Maybe you are looking for