How to select data from AZure table storage without row key and partition key

Hi
I need to select a data from azure table storage without rowkey and partition key. how in azure storage emulator click query it display all data from that table.
thanks
rajesh

Hi rajesh,
It seems that you didn't click query data using storage emulator. But I recommend you could use the azure server explore in your VS to view your data and query data. Please see this document (http://msdn.microsoft.com/en-us/library/azure/ff683677.aspx).
And base on my experience, you may need input the command on Azure storage emulator, such as this page(http://msdn.microsoft.com/en-us/library/azure/gg433005.aspx).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

How to select data from a table using a date field in the where condition?

How to select data from a table using a date field in the where condition?
For eg:
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '31129999'.
thanks.

Hi Ramesh,
Specify the date format as YYYYMMDD in where condition.
Dates are internally stored in SAP as YYYYMMDD only.
Change your date format in WHERE condition as follows.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu = '99991231'.
I doubt check your data base table EQUK on this date for the existince of data.
Otherwise, just change the conidition on BDATU like below to see all entries prior to this date.
data itab like equk occurs 0 with header line.
select * from equk into table itab where werks = 'C001'
and bdatu <= '99991231'.
Thanks,
Vinay
Thanks,
Vinay

How to select data from a table by passing document number from another tab

How to select data from a table by passing document number from another table.
for eg:-
I want to display name, adres, region from ADRC table
by using field delivery document number
Kind Regards,
Shanbagavalli.S

Hi Shanbagavalli,
There are multiple solutions to this questions a few i will try to answer and then you can take the best required for your requirements.
**Consider that you have a Internal table having document number from other table..
SELECT NAME ADRES REGION FROM ADRC
       INTO IT_ADRC
       FOR ALL ENTRIES IN IT_DOC
       WHERE DOCUMENT_NO = IT_DOC-DOCUMENT_NO.
**Consider that you have 1 document number then
SELECT NAME ADRES REGION FROM ADRC
     INTO IT_ADRC
     WHERE DOCUMENT_NO = W_DOCUMENT_NO.
Hope this solves your problem.
Regards,
Kunjal

How to select data from cluster table

hi experts,
I have a report which picks data from bseg (cluster table ) for a month report it is taking around 4 minutes to process.I feel it is not good when take the report after some months.
how to select data from these table???how to declare itab for these cluster tables????can we include any search condition or any other kind of internal table???
please advice.
mani

Hi Manikandan,
The following code may be helpful to understand how to select the data from cluster table.
Types: Begin of ty_kna1,
Kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_kna1,
begin of ty_bseg,
belnr type bseg-belnr,
kunnr type bseg-kunnr,
end of ty_bseg,
begin of ty_final,
belnr type bseg-belnr,
kunnr type kna1-kunnr,
adrnr type kna1-adrnr,
end of ty_final.
Data: it_kna1 type table of ty_kna1,
wa_kna1 type ty_kna1,
it_bseg type table of ty_bseg,
wa_bseg type ty_bseg,
it_final type table of ty_final,
wa_final type ty_final.
Select kunnr adrnr from kna1 into table it_kna1 where....
if sy-subrc = 0.
select belnr kunnr into table it_bseg for all entries in it_kna1 where kunnr = it_kna1-kunnr.
endif.
sort it_kna1 by kunnr.
Loop at it_bseg into wa_bseg.
move wa_bseg-belnr to wa_final-belnr.
read table it_kna1 into wa_kna1 with kunnr = wa_bseg-kunnr binary search.
if sy-subrc = 0.
move: wa_kna1-kunnr to wa_final-kunnr,
wa_kna1-belnr to wa_final-belnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
Loop at it_final into wa_final.
write: / wa_final-belnr, wa_final-kunnr, wa_final-adrnr.
endloop.
Reward if useful.
Thankyou,
Regards.

How to Select Data from different Tables Using Linq

Hi,
I have two different tables, I just want to collect data from tables using Linq to SQL Queries.
The tables looks like This
ID Name ImageUrl
Other Table is
ID EmpID CheckInTime CheckOutTime
What I want to Collect data from CheckInTime and want to place it in a that is in a list view
Same thing I want to do it for CheckOutTime And One thing I want to tell is both tables are joined by a FK EmpID with ID.
What Are the suggestions for me
I have Used this code
var data = from emp in db.Employees
join chk in db.CheckInCheckOuts on emp.ID equals chk.EmpID
select new EmployeeCheckInOut
Name = emp.Name,
ImageUrl = emp.ImageUrl,
CheckIn = emp.CheckInCheckOuts,
CheckOut = emp.CheckInCheckOuts
Here the CheckInCheckOuts is another table, I don't how do I access fields of the Other table "CheckInCheckOuts"
Thank you
Ali

Mitja,
Kind of Tables, I don't Know but I can Tell you that these are Two table, first Table Have Data in It, Name, ImageUrl I have filled this table with names and ImageUrls And are string type.Other Table is for the CheckInTime And CheckOutTime of the employee.
What I need that when I click on the Image button it Should displays The Current Datetime into the label below the Image button.
So I have Problem accessing my CheckInCheckOut Table because I may not have Idea about.Did you understand what I need to do, if you have more question please ask to me.
Thanks
Ali

How to select data from cube by BAPI

Hi
now i want to select data from cube by selection
and the parameter is BAPI'S import.
I want to know how can i select data from which table the storage the cube's data
Thank you for your help !!

Hi,
You can use FM: RSDRI_INFOPROV_READ.
BAPI_CUBE_GETDETAIL
Pls Check the below weblog
/people/dinesh.lalchand/blog/2006/06/07/reading-infocube-data-in-updatetransfer-rules
Regards,
CSM Reddy

Select data from database tables with high performance

hi all,
how to select data from different database tables with high performance.
im using for all entries instead of inner joins, even though burden on data base tables is going very high ( 90 % in se30)
hw to increase the performance.
kindly, reply.
thnks

Also Check you are not using open sql much like distict order by group by , use abap techniques on internal table to acive the same.
also Dont use select endselect.
if possible use up to n rows claus....
taht will limit the data base hits.
also dont run select in siode any loops.
i guess these are some of the trics oyu can use to avoid frequent DATA BASE HITS AND ABVOID THE DATA BASE LAOD.

How to select data from Maintance View in Program

Dear All ,
How to select data from Maintance View V_T052 in abap Program.
Regards,
Archana

TABLES: t179, t179t.
DATA: v_t179_int TYPE TABLE OF v_t179.
SELECT * FROM t179
JOIN t179t ON
t179prodh = t179tprodh
INTO CORRESPONDING FIELDS OF TABLE v_t179_int.
Reward points...

How to read data from cluster table.

Hi experts.
CDPOS --- "Change document items" ... is a cluster table.
how to select data from it into an internal table....
please help..
i will award points for every help.
thanks
saurabh.

Hi Saurabh,
Use the foll. statement,
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
For Eg,
IMPORT ITAB TO JTAB FROM MEMORY ID 'table'.
This code reads the internal table ITAB from the cluster "table" into the internal table JTAB.
Hope it helps.

How to Retrieve data from Variant Table

Can anyone help me by telling how to retrieve data from variant table which was created by user. I am able to see data of variant table only thru cu60 transaction but not se11. I s there any function module to do this?

Hello Mohan,
if u already have data and u want to populate it in F4 help then use below code -
u Have to make use of FM - 'F4IF_INT_TABLE_VALUE_REQUEST'
REPORT ZGILL_VALUE_REQUEST                     .
data: begin of lt_all occurs 0.
        include structure DYNPREAD.
data end of lt_all.
data: begin of lt_selected occurs 0.
       include structure DDSHRETVAL.
data: end of lt_selected.
DATA: BEGIN OF lt_code OCCURS 0,
            code LIKE zgill_main-PERNR,
      END OF lt_code.
data no_dyn like sy-dynnr.
Parameters : ECODE like zgill_main-PERNR.
*parameters: pernr like pa0001-pernr .
no_dyn = sy-dynnr.   "give the scren no directly or sy-dynnr in case of report.
At selection-screen on value-request for ECODE.
select PERNR into table lt_code from zgill_main.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
        retfield               = 'ECODE'
        dynpprog               = sy-repid
       dynpnr                  = no_dyn
      dynprofield              =       'ECODE'
      window_title           = 'Employee Details'
       value_org              = 'S'
      DISPLAY                = 'F'
   TABLES
        value_tab             = lt_code
       RETURN_TAB             = lt_selected.
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
*if sy-subrc eq '0' .
write: 'success'.
*endif.
read   table lt_selected index sy-tabix.
move lt_selected-fieldval to ECODE.

How to retrieve data from catsdb table and convert into xml using BAPI

How to retrieve data from catsdb table and convert into xml using BAPI
Points will be rewarded,
Thank you,
Regards,
Jagrut BharatKumar Shukla

Hi,
This is not your requirment but u can try this :
CREATE OR REPLACE DIRECTORY text_file AS 'D:\TEXT_FILE\';
GRANT READ ON DIRECTORY text_file TO fah;
GRANT WRITE ON DIRECTORY text_file TO fah;
DROP TABLE load_a;
CREATE TABLE load_a
(a1 varchar2(20),
a2 varchar2(200))
ORGANIZATION EXTERNAL
(TYPE ORACLE_LOADER
DEFAULT DIRECTORY text_file
ACCESS PARAMETERS
(FIELDS TERMINATED BY ','
LOCATION ('data.txt')
select * from load_a;
CREATE TABLE A AS select * from load_a;
SELECT * FROM A
Regards
Faheem Latif

How to copy data from transparent table to our own ceated z table?

How to copy data from transparent table to our own ceated z table?
Plz tell me different methods and which one is best?
Is get data from sflight into table z* is correct?

Hi Ajay,
let us consider you have to copy EKKO table to ZEKKO table
1. In ABAP program define internal table based on EKKO
 eg: i_ekko
2. Select the data from EKKO to i_ekko
 eg: select * from ekko into table i_ekko.
3. insert into Z-TABLE from the internal table
 eg: INSERT EKKO FROM TABLE I_EKKO.
 COMMIT WORK.
To insert in internal table you can use the following:
1. INSERT [wa INTO|INITIAL LINE INTO] itab [INDEX idx].
2. INSERT [wa INTO|INITIAL LINE INTO] TABLE itab.
3. INSERT LINES OF itab1 [FROM idx1] [TO idx2] INTO itab2 [INDEX idx3].
4. INSERT LINES OF itab1 [FROM idx1] [TO idx2] INTO TABLE itab2.
To inert in database table, use the following:
1. INSERT INTO <dbtabname> [CLIENT SPECIFIED] VALUES wa.
2. INSERT <dbtabname> [CLIENT SPECIFIED] FROM TABLE itab.
3. INSERT <dbtab> [CLIENT SPECIFIED]. oder
4. INSERT <dbtabname> [CLIENT SPECIFIED] ... .
Reward points.. if helpful.
Cheers !
Moqeeth.

Error while selecting date from external table

Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2        SE_CUST_ID NUMBER(38),
3        SE_TRAN_AMT_LCY FLOAT(126),
4        SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6    TYPE ORACLE_LOADER
7    DEFAULT DIRECTORY ext_tables
8    ACCESS PARAMETERS (
9      RECORDS DELIMITED BY NEWLINE
10      FIELDS TERMINATED BY ','
11      MISSING FIELD VALUES ARE NULL
12      (
13        country_code      CHAR(5),
14        country_name      CHAR(50),
15        country_language CHAR(50)
16      )
17    )
18    LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19

It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell --

How to send data from internal table to the shared folder in ABAP

Hi experts,
My requirement is to transfer data from a file to shared folder. i just did reading data from a file to a internal table. Now i want to send this internal table data into a shared folder which is "
xxx\y\z....".
I do not have any idea on how to send data from internal table to the shared folder path.
can anybody please help me out how to do this?
Thanks & Regards
Sireesha.

Where that folder is located, its on presentation server i.e. desktop or application server.
If its on presentation server, use FM GUI_UPLOAD.
If its on application server, then use DATASET functions. Have a look at below link.
[File Handling in ABAP|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm]
I hope it helps.
Thanks,
Vibha
Please mark all the useful answers

Select data from two tables...!

HI Experts...!
i m a beginner user and i want to select data from two tables proj and prps.....using joins.....and internal tables i have written a code...
SELECT prps~pspnr
       prps~objnr
       prps~psphi
       proj~ernam
       proj~erdat
       proj~pspnr
INTO table itab   -
itab is internal table
FROM prps inner join proj
WHERE pspnr in p_no and prpspsphi = projpspnr.
but there is error in from clause ..please help me....
Advance thanx....

Hi,
check the sample code bellow above two reply will solve out your problem but one more extra line in your code pointed out bellow.
TABLES: prps, proj.
TYPES: BEGIN OF ty_test,
        pspnr LIKE prps-pspnr,
        objnr LIKE prps-objnr,
        psphi LIKE prps-psphi,
        ernam LIKE proj-ernam,
        erdat LIKE proj-erdat,
        END OF ty_test.
DATA: itab TYPE STANDARD TABLE OF ty_test WITH HEADER LINE.
SELECT-OPTIONS: p_no FOR prps-pspnr.
SELECT prps~pspnr
        prps~objnr
        prps~psphi
        proj~ernam
        proj~erdat
*        proj~pspnr " No need for this you have selected this in
*     the first line because it is commone so you only need to select from any one
        INTO TABLE itab
FROM prps INNER JOIN proj ON ( prps~pspnr = proj~pspnr )
WHERE prps~pspnr IN p_no.
Best Regards,
Faisal
Edited by: Rob Burbank on Dec 24, 2009 12:24 PM

How to select data from AZure table storage without row key and partition key

Similar Messages

Maybe you are looking for