How to select multiple clips? "Help" is wrong.

Hi. I've got iMovie 11 v 9.0.9. "Help" is wrong in this version - it says, to select multiple clips in the Events browser, hold down the command key while selecting - the normal thing, right? - but it does nothing. The first selection disappears, just as it would if you didn't hold the Command key down. I've tried every combination of keys and click I can think of, and still no success. Usually, when I can't get something to work and get frustrated with it, I find out it's my own fault and invariably what I've done is overthink the thing...with Mac it's always KISS.
But I'm stuck. Could someone please tell me how to do this?
I'd really appreciate any help, thanks.
Lynne

No. In finder hold down the option key and in the GO menu select Library. In the window that appears Open the Preferences folder then scroll down and find com.apple.iMovie.plist and com.apple.iMovie LSSharedFileList.plist and drag them to the trash. Do this with iMovie closed. Thenreboot and relaunch iMovie.

Similar Messages

How to select multiple clips???

I am a very avid iMovie user and now this new version has me so confused. I have the basics down, but I can't figure out how to select all clips and dump them into the "timeline" area. I can select them one at a time and place them in the assembly area but that takes forever on a one hour soccer game. Anyone figure out how to select multiple clips or all clips at once?
Thanks ahead of time.

Weird seeing this question today after I dealt with this yesterday. I did a movie yesterday that was multiple clips. I was able to select all clips at once and drag the entire thing up to the top window. I just tried to do the same thing again after reading this question and for the life of me, it will no longer allow me to click and drag to select them all. I wonder if this has something to do with the fact that all 10 or so clips I was able to highlight before, were all parts of the same clip when filmed (they were split into individual segments when imported). When I try to combine two clips that are not filmed sequentially, it will no longer allow it. The help menu says nothing about this. All it says is you need to click on the first clip and hold the mouse down and drag it to the end and it will select all. That is not working.

How do I select multiple clips in a timeline in the reverse direction, e.g. middle to front?

I know how to click "a" and select clips in the timeline looking forward, but how do we select multiple clips from a middle point to the front of the timeline? I don't want to be lassoing -- is there some other way?

Hi denniscallan,
Please check the track selection tool. Refer to the link below for more information about the tools section.
http://help.adobe.com/en_US/premierepro/cs/using/WSd79b3ca3b623cac957c49aa9127401b0642-7ff f.html
Regards,
Vinay

How can I select multiple clips in the event browser?

I can't seem to figure out how to do something that should be pretty simple. I want to select multiple clips in the event browser that aren't next to each other. Right now it's only letting me select the two clips with every other clip in between. Is there a keyboard function that will allow me to deselect the clips in between while leaving the two on the outside selected? In Apple's finder you can do this with files by holding down shift-command while clicking on the ones you want. Or is there away to rearrange clips in the event browswer?
I'd like to be able to create a multicam clip, but there is always going to be other media in between the clips I want to combine, so how can I select only the clips I want?
Thanks!

Holding the Command key should let you select non-contiguous items, just as in the Finder.

How to select multiple records from a TREE in the table

HI,
I have a tree structure which is in the table.When I open the node of the tree,all the subnodes are coming as one-one records in the table.I want to slect multiple record from this table.I applied onLeadSelect for this table,I can select only 1 record from the table.
Can any one plz suggest me how to select multiple records from the table so that I can get all the data of those selected record.
Regards
-Sandip

Rashmi/Kukku,
First of all, Thanks for your help!
Is there any other way in which we can access tables other than using BAPIs or RFCs?
In my case, there is a table structure which has to be updated with values after validating a key. i don't think there is any RFC available now. do i need to create bapi/rfc for that?
Krishna Murthy

How to select Multiple items in the dvt:pivotfilterbar?

How to select Multiple items in the filters in the dvt:pivotfilterbar?

To select multiple media and other files, it's not possible. You can do so in messages as directed.
To select multiple files, connect to your PC and select them.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How to select multiple lines in reports

Hi,
how to select multiple lines in a reports and process those selected lines to other activities like BDC.
Please paste sample report here. or any demo examples . (don't paste ALV report , paste only classical report)
suppose there are 10 records in output, i want to select 3 records and process other activities like bdc.
Point will awarded.

Hi ,
the o/p in ur case will be a basic list output with a check box enabled in the left .
Now say there are 10 records in the list output and i have checked 3 of them where checkboxes are enabled .
And i press a button to submit this to the BDC .
Here u need to make use of
READ LINE statement to read the records from the list output and then pass them to the BDC .
The code would be something like this
DO .
Read line index <field> where checkbox <> ' '.
ENDO.
You can have a look at the F1 help on read line . This will mkae u clear .
Hope this gives u an idea.
Regards,
Vijay.

Is it possible to select multiple clips and create a sequence from each individually?

Is it possible to select multiple clips and create a sequence from each individually? If you select multiple clips and select "New Sequence from Clip" it puts all of the clips into one sequence. Is there an easy way to quickly perform this on multiple selected clips separately?

So now I *have* used Butler with PPro, and it works very well, here's an idea of how to do it:
Import folder of clips
Ensure first clip selected in bin and sorted by Media Type
Most of these commands need shortcuts assigning - mine listed below
Macro:
To create seq from selected clip:
‘New seq from clip’ (Shift+CMD+N)
To duplicate this seq:
‘Reveal Sequence in project’ (Shift+F) - not strictly necessary as it will already be selected
‘Window | Project’ (CMD+9)
‘Edit | Duplicate’ (Shift+CMD+/)
To rename the duplicate
‘Enter’
Various keystrokes to rename as required
‘Enter’ - to make name stick
‘Shift+Enter’ - to reselect that sequence
‘Esc’ - to get out of editing name
To change resolution of duplicate:
‘Sequence Settings’ (CMD+5)
‘Tab’ x 3 (to get to H Frame Size)
‘xxxx’ (to enter frame width)
‘Tab’ x 1 (to get to V Frame Size)
‘yyyy’ (to enter frame height
‘Enter’ x 2 as prompt will say previews will have to be deleted
To then find next clip ready for macro to run again:
‘Open in Timeline’ (Shift+CMD+O)
‘Match Frame’ (Shift+Spacebar)
‘Reveal in Project’ (Shift+CMD+F)
‘Window | Project’ (CMD+9)
‘Down Arrow’ - to select next clip
I tried it with Butler (manytricks.com - free trial, $20 to buy) and it worked a treat, takes about 3 secs per clip
AHK (for windows) is at autohotkeys.com and is free.
You could start making multiple macros - that would enable you to do grade / resize in middle of duplication - and then export etc, but I figure you can figure that out ;-)

Selecting multiple clips in Imovie for Iphone for plus Ipad 2?

hi guys first post on these forums i hope you can help.
I recently downloaded imovie from the app store for my iphone 4 and so far have been really impressed with it. However there is one problem i'm having. I would like to select multiple clips from my camera roll without having to keep going back into the media section and having to scroll down to find the clips for everyone i want to add. Is there a way of selecting multiple clips? any help appreciated!

There is a way to load multiple video clips at once on iMovie's timeline on the iPad.
I have been able to load multiple video clips into my iPad's iMovie's timeline at the same time, but this process requires the combined use of iMovie and iPhoto and won't work if you have iOS 8 running on your iPad.
This is the way I do it. You create an iMovie project (Movie) on your iPad. iMovie will show the video clips that you can load to the timeline, but, as you have probably already found out, you can't load more than one clip at a time in iMovie's timeline. My videos have sometimes 100-200 clips, so loading them into the timeline one-by-one is a very long and tedious process. I do this instead:
(1) I go to iMovie and load the first clip on the timeline using iMovie. (This needs to be done to avoid iPhoto importing its background music to your video clips in iMovie.)
(2) Then I get out of iMovie and go into iPhoto. iPhoto shows you all the photos, but more importantly also all the videos in your Camera Roll.
(3) In iPhoto, I select the next video in the Camera Roll (the one right after the clip that I already placed on iMovie's timeline).
(4) Next, I hit the icon at the top of iPhoto that takes you to the "Share" section (the icon is a square box with an arrow pointing to the top). This will open a dialogue box that has a section there for "Apps" and you will see the iMovie icon.
(5) Select the iMovie icon, it will open a dialoge box that reads at the bottom: "Choose Photos...".
(6) Select "Choose Photos..."
(7) Now you can select up to 15 video clips in iPhoto to load into iMovie's timeline. You select each video by tapping it, it becomes encased in a white square and will show a check mark.
(8) After selecting up to 15 video clips, hit "Next" in the top right corner, you will be taken to iMovie.
(9) In iMovie, you will be asked to select the project into which the clips are to be placed. Select the project and the clips will all be loaded at once into iMovie's timeline.
Repeat the process again each time to load more clips; the process will place each new group of clips on iMovie's timeline right after the previously loaded clips. When you return to iPhoto, the clips that appear encased with a heavy white border are the ones that have already been placed in the timeline for iMovie; select the next uncased clip and 14 more and load them into iMovie in the same way as described before.
One word of caution: This process only works using iMovie and iPhoto together. iPhoto does not work with iOS 8! (Thank you, Apple!) That's why I don't have iOS 8 on my iPad, so, the process works fine. I hope this helps.
Cheers,
stukajoe

How to move multiple clips with transitions?

Im still transitioning from FCP7 to FCP 10.1.2 and can't believe I have missed the lesson that explains how to move multiple clips with transitions.
Up till now I have tried several work arounds including deleting all the transitions then using the (P) Position tool to move the clips from the primary track to some track above it then re adding all the transitions. This is a function I do on a daily basis. Am I missing something? Please help!
Thank you

With some further investigation, the transitions have nothing to do with my problem. In my case there was a tiny “Black gap slug” within the group that was preventing me from being able set it on top of another group of clips or gap someplace. But even with the gap removed… I can move the clips on top of another group but the transitions stay behind on the primary (Magnetic)
In the screen shot you can see what happens when I move a group out of the primary (magnetic) timeline onto a gap. All the transitions get left behind.
Ive notices that Cutting and pasting will only paste the sequence some other place on the primary (magnetic) timeline for me.
An example of why I would want to put a cropped/ resized group on top of another group is to do picture in picture effects or if I wanted to create a background behind a set of adjusted clips.

Selecting multiple clips sealed off by other clips

Hi,
Im trying to figure out a way to select multiple clips in a track which is sealed off on all sides by other clips, so I can't just click and drag.
I want to select the middle clips, without Ctrl+Click on all of the necessary ones.

Click and Drag Lasso does the same thing without having to Select a Tool.
Locking and unlocking is 2 or 3 clicks. About 2 seconds. You save one click from not having to select a special tool to do this.
How fast do you want to be able to do this and what will you do with the time you save?

How to select multiple values from a listbox

Hi,
I have a list box on my UI which is not allowing me to select multiple values
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving error
When i drag & drop the component i am unable to drop it as a multi select list box that option is not coming.
I am working on Jdev 11.1.1.3 and I am using ADF/BC components
How to select multiple values from a listbox ?
Thanks,

Hi,
I want to use multi select list box .. When i go to source of UI component and change that to select many listbox my page is not rendering it is giving errorank
And what is the error ?
Frank

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to select multiple values from the Parameters in the concurrent program

How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

I think there's no way to do that using standard feature.
Some workaround I use :
1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
Selection1 : <choose first selection>
Selection2: <choose 2nd selection>
..etc.
If you don't use it then leave it empty.
2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

How to select multiple row in ALV report

Hi friends,
1. How to select multiple row in ALV report
               ( How to set tab in ALV report and want to select multiple line.)
Thanking you.
Subash

Hi Sahoo,
If you are using the class CL_GUI_ALV_GRID. In methods SET_TABLE_FOR_FIRST_DISPLAY.
in layout structure you will find field SEL_MODE
pass :
LS_LAYOUT-SEL_MODE = 'A'.
In PAI.
CALL METHOD GRID->GET_SELECTED_ROWS
    IMPORTING
      ET_INDEX_ROWS = T_ROWS
      ET_ROW_NO     = T_ROWID.
Hope these will solve your problem.
Regards,
Kumar M.

How to select multiple clips? "Help" is wrong.

Similar Messages

Maybe you are looking for