How to select the vendor from the source list in the PO(me21n) screen ??

Hi
How to select the vendor from the source list in the PO(me21n) screen.
Is there any Sources of Supply tab in the PO just like we have in the PR.
I don't want a PO raised from a PR which has got the Vendor assigned to it already.
Or the SAP doesnot provide the option of Source list/Assign source/Sources of Supply .....in the PO.
Kindly reply

There is not any facility available for Source Determination in PO. Only you can select the line item and click Menu Environment > Source List and view the list of sources available for the material but you can not chooss and assign. If you wan to assign the vendor then change the vendor already entered in PO and put the desired vendor.

Similar Messages

  • ITunes 11.0.1 Where has the radio option gone from my source list on the left side of iTunes ? How can I restore it?

    Where has the radio option gone from the source list on the left hand side of my itunes? How can I restore it

    If you have it turned on it is now under the music section on the top where you have Songs, Albums etc. It is on the far right next to Match.
    If you cannot see it then Preferences and Tick Radio Option
    If it is still npt there the Preferences, Parental and untick Disable Radio

  • HT201068 I want to ignore this update.  How do I remove it from my active list on the App Store app?

    Can I remove this update from the active list on the computer?  I don't want it active as I may by mistake install this unwanted update

    You can only hide some updates (i believe only OS X updates).  You can do so by right clicking or control clicking in the blank area around the description or title of the update in the App Store list and choosing hide update.  If you'd like to restore them, choose the Store option from the menu bar and then "show all software updates"
    you can alternatively use the Terminal to "ignore" updates and reset "ignored updates".  For more information on that open Terminal and type:
    softwareupdate info

  • How do I clear duplicates from my contact list on the iphone

    My iphone contact list is has many duplicates fromprevious syncs.  Can I clear these out?

    You can't do it on the iPhone. You'll have to do it on your computer. Open Address Book. Go to Cards>Look for Duplicates. Delete those from there. You also might want to merge some info too. You can also merge them using the merge option under the Cards menu.

  • How to select multiple values from the parameters in BI Publisher report

    How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

    Hi kishore,
    I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
    Iam able to get the results when I am selecting one value..
    and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
    ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
    1.Single selection.
    2.Multiple selection.
    3.'ALL' Values.
    4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
    Ex:
    Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
    Expected Output on the report:ACCOUNT,HR,SALES
    reply to this would be much appreciated....
    thanks,
    manoj

  • How to select multiple values from the Parameters in the concurrent program

    How to select multiple values from the Parameters defined in the concurrent program...and i believe multiple selection is not a direct feature of EBS, but is there any workaround solution to acheive mulitple selection?

    I think there's no way to do that using standard feature.
    Some workaround I use :
    1. If the number of selections are fixed, you could use multiple parameters for the same valueset. For example :
    Selection1 : <choose first selection>
    Selection2: <choose 2nd selection>
    ..etc.
    If you don't use it then leave it empty.
    2. Use text varchar valueset and enter it manually and separate by comma (or other value) , eg : selection1,selection2,selection3....etc.

  • How to select multiple records from a TREE in the table

    HI,
    I have a tree structure which is in the table.When I open the node of the tree,all the subnodes are coming as one-one records in the table.I want to slect multiple record from this table.I applied onLeadSelect for this table,I can select only 1 record from the table.
    Can any one plz suggest me how to select multiple records from the table so that I can get all the data of those selected record.
    Regards
    -Sandip

    Rashmi/Kukku,
    First of all, Thanks for your help!
    Is there any other way in which we can access tables other than using BAPIs or RFCs?
    In my case, there is a table structure which has to be updated with values after validating a key. i don't think there is any RFC available now. do i need to create bapi/rfc for that?
    Krishna Murthy

  • How to select alternate entries from the database table

    Hi Experts,
    can u help me, how to select alternate entries from the database table.
    Thanks

    As there is no concept of sequence (unless there is a field specifically included for the purpose), there is no meaning to "alternate" records.
    What table do you have in mind, what data does it hold, and why do you want alternate records?
    matt

  • How can i import the data from multiple sources into single rpd in obiee11g

    how can i import the data from multiple sources into single rpd in obiee11g

    Hi,
    to import from multiple data sources, first configure ODBC connections for respective data sources. then you can import data from multiple data sources. When you import the data, a connection pool will create automatically.
    tnx

  • I deleted the " recently added " from my source list

    I was trying to empty the file and it got removed from my source list. How can I get it back or create another?
    desktop   Windows XP  

    Why don't you just create another smart playlist and call it "Recently Added" the default specs for this file (way Apple set it up) are Check in Just Recent Add Box, then in the parameters: first box: "Date Added", next box "in the last", next box "2", next box "weeks". Other defaults are limit to "25" songs and select "random". Finally, the "live updating" box is checked. Good luck!

  • How do I put all the songs from a compilation album into the same /album/folder in Itunes v12

    How do I put all the songs from a compilation album into the same /album/folder in Itunes v12 i know in other versions it was via get info but as all of the tunes have the same album title , I am not sure what tio change to achieve this ?

    I don't see your screenshot but I assume you're starting with something like this, i.e., the compilation split into multiple albums:
    If you select all the items that you want to be in a single album, right-click > Get Info you'll see this:
    As you say, in iTunes 12 you don't see a field to enter a distinct Album Artist value.  You can, however, address this by clicking the Add Field button and selecting Album Artist:
    That makes the field available in the metadata dialog so that you can enter the required value:
    You can also show the pre-iTunes 12 version of the dialog by holding the SHIFT key when selecting Get Info - this allows you to enter the Album Artist directly:

  • How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)

    How do I change the default folder that opens when uploading a file to the internet from my mac? (at the moment it automatically defaults to 'Downloads' folder)
    For example...
    I am on a webiste and wish to upload a photo.
    I click on select file on the website
    Finder opens and defaults to 'Downloads' folder (it happens with all wesbites)
    How do I change this?

    I am on a webiste and wish to upload a photo.
    I click on select file on the website
    You are attempting to download the picture to your computer not uploading photo to the website if I am understanding you correctly.
    To change the download direction, you must do so through your browser's Preferences.  If you are using Safari, hopefully, someone who uses Safari will help you and/or post over in their forums.  I do not use Safari.
    If using Firefox>Preferences>General>Save Files to:

  • Reading the data from XML Source

    Hi
    i want to read the data from XML source file, and update the transaction information to another XML file. how we can do this in ADF, please help
    Thanks
    nidhi

    you may use normal Java API to do that
    http://www.javablogging.com/read-and-write-xml/

  • How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

    how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
    note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
    can I import the same way as I did previously??
    but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
    please help ...
    thanks

    Hi,
    Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
    You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
    In step 1 use a suitable database connection that can access the relevant table definitions.
    In step 2 select the schema (or schemas) to import.  The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
    In step 3 select the tables to import.  (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
    After the import itself has completed, the "Compare Models" dialog is displayed.  This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
    Just selecting the Merge button should apply all the additions and changes in the new import.
    Having updated your Relational Model, you can then update your Logical Model.  To do this you repeat the "Engineer to Logical Model".  This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
    Just selecting the Engineer button should apply all the additions and changes.
    I hope this helps you achieve what you want.
    David

  • Active Directory error message "the following object is not from a domain listed in the Select location forestB\username

    Hello Community
        "forestA" is my forest it is a Windows 2008 Server Enterprise Edition
    domain controller using Active Directory and the UI.
        In my forest ("forestA") trust relationship I created a "One-Way, Out-going"
    forest trust with Forest-Wide authentication so that a different forest user(s) or
    group(s) with a different admin in a forest named “forestB” can access the resources in my “forestA”
        But also forestB needs to create a "One-way, Incoming" forest trust so that
    I can either add the user(s) or group(s) from “forestB” into to a "Global Security - Group"
    in my "forestA" or I can
     add user(s)  as  "domain user(s)" from “forestB” into my "forestA".
        The problem is that when I right click  the global group in my forestA  and then
    properties, when I click "Members" and then the "Add" button when I type
    "forestB\username" I get an error message from Active Directory stating:
        "the following object is not from a domain listed in the Select location
    dialog box, and is therefore not valid: forestB\username".
        Am I doing something wrong when creating the one-way trust in my
    “forestA” or is the one-way trust being created wrong by the other domain admin in the other “forestB”?
        Or could I possibly need to select "Change Domain" or "Change Domain Controller"
    before adding the users or Groups to my forestA from forestB?
        That is why I am asking
     how do you add an Active Directory user from one forest into another forest?
        Thank you
        Shabeaut

    Hello Denis Cooper
        That is the end result.
        What I was trying  to do was that I was trying to
     bring in the user(s) and group(s) from “forestB”  into
    my “forestA”  Global group.
        Later on I was going to add the user(s) or Global groups(s) that I brought into my dc in my forestA
     into the domain local groups  on my member servers in my forestA.
        So since the error message is:
    "the following object is not from a domain listed in the Select location dialog box, and is therefore not valid: forestB\username".
    Does your response
     mean only Global group(s) from forestB not domain user(s) from forestB have
     to been added to domain local groups in forestA?
    Or is it also possible to add Global group(s) from “forestB” to Global group(s) in my “forestA” and if so
    how without getting the above error message?
    Thank you
        Shabeaut

Maybe you are looking for