How to send a project from Premiere Pro to be opened on another computer in FCP7?

The crux is I have this project in Premiere Pro CS5.5 which contains the original MOVs and time adjusted movs that I nested and turned into F4Vs, so it contains movs and f4vs with 1 aiff file and I need to send the work to the director(who has FCP7 and works on a Apple computer) so they can key out the green screen and grade it in FCP7. I prefer no to send 1 big file because there are lots of fast flickering cuts so would take alot of time to go through it pretty much frame for frame. So it would be eaier if they could view it as a project file in FCP7 like I can see it in Adobe Premiere Pro. I haven't done this before as you can tell but someone must of tried doing this before so how is it done?
My project settings in Pro are
Editing mode: DSLR
Timebase 25.00 frames/second
FRame size 1920 x 1080 vertical 16:9
Pixel Aspect Ratio: Square Pixels (1.0)
Display Format: 25fps Timecode
Sample Rate:48000HZ
Dispaly Format:Audio Samples
Video Previews
Preview File Format I-Frmae Only Mpeg
Codec: Mpeg I-Frame
Width 1920
Height 1080
Please help I really appreciate any advice, I've tried converting the f4vs into apple pro res but no video converter or media encoder will let me even if i imort the pro res preset.

Duplicate the project with referenced events onto the external hard drive.

Similar Messages

  • How to transfer an unfinished project from premiere pro 2014 to premiere pro cs6

    Ok I a not too savvy with my new MAC or computers in general but i used to work with Power Director excellent product on my PC. So how do you transfer an unfinished project from Premiere Pro 2014 to Premiere Pro Cs6

    Um ... by basically re-doing the project ... as there's SO much added to CC since the CS6 version, the tools have changed, the available effects have changed, the underlying code has changed ... there's just so much that CC can do that can't be done in the old CS6 version.
    You can try exporting an XML and importing that into CS6 ... sometimes that works better than others, it hath been stated. This is sort of like trying to put a modern engine with all the computer controlled gizmos & pollution controls & fuel injection and designed to work with a 5-speed auto transmission into a 1965 Chevelle. With the older 3-speed manual tranny. How do you do it? Rebuild everything ... both the engine & the car. Lot of work.
    Neil

  • Premiere Pro CC 2014 keeps freezing when loading projects from Premiere Pro CC

    Hi everyone,
    I'm reporting this issue in case someone else would have the same problem.
    I just downloaded the 2014 version of Premiere Pro CC, and when I'm loading a project from Premiere Pro CC into CC2014 I have the software freezing and being unable to even play the loaded sequences. It seems that dynamic link is having trouble linking the CC and the CC2014 version of Premiere Pro.
    Until now the only solution I found was to kill the process of the software and start it again, after 8 times I got my sequence loaded alright, then sometimes it is freezing again, killing process, starting software again, and so on. Does anyone has the same problem ?
    I'm running a Windows 7 Ultimate PC with 12Go RAM dedicated only to Premiere Pro.
    Cheers,
    Vincent

    Hi Vincent,
    I feel your pain, you are not alone. Here are my machine specs and my very frustrating situation, if anyone has any idea as to how I should move forward, I would really appreciate the input/advice...
    iMac - 27" Late 2013
    Processor  3.4 GHz Intel Core i5
    Memory  12 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce GTX 780M 4096 MB
    Software  OS X 10.9.4 (13E28)
    I'm having similar issues that began when I installed Premiere Pro CC 2014, and actually got worse with the latest update/release. The majority of my projects worked fine at first, but the update last week ended that quickly. I did what I know I never should do and updated Adobe CC while completing a project on a deadline. I thought some of the fixes would help me complete the project sooner. Needless to say, the deadline has passed, my client is pissed enough to not pay me or hire me again and I'm stuck with an almost-there version that I can't export correctly because of this software. This is my problem, not Adobe's, but I didn't expect such a detrimental update to halt my operation.
    After doing some research, I found that some plugins could be the cause of some specific editing issues, mainly due to incorrect or inaccessible folders - who knows if its Dynamic Link, CC apps or 2014 apps. I concluded that my issue at the time was a plugin permissions issue on the Adobe "Preference" Folder, so I reset the permissions on the folder so that CC and 2014 apps would be able to access its contents without any problems. This was the wrong decision. For some reason, resetting this folders permissions also effected the main HDD, it's Kernel Text files and their respective permission. I could not boot my machine, just got the Apple and spinning wheel until I had to power down. I ended up on the phone with 3 different AppleCare reps who helped me at least be able to turn the machine back on and access my desktop/files, apps, etc. Outside of this, no one could offer anything other than "Uninstall the problematic application, reboot, reinstall, etc..." or "Backup your files and reimage the HDD." When I mentioned the recent CUDA driver update for my graphics card (NVIDIA GeForce GTX 780M 4096 MB now running CUDA Driver Version: 6.0.51), it was like they had never heard of graphics cards being used in their machines.
    Resetting permissions on Adobe Preference Folder...
    This is what I read would get the CC and 2014 apps communicating correctly so that they could utilize my plugins. There is a problem, I believe, in that their are TOO MANY locations where Adobe folders/components live. There are 3 "Preferences" folders that I found, and I don't know which effects what process, but the folder I changed permissions on clearly effects the operation of all of the CC & 2014 apps I had installed, as well as my HDD. Kernel Extensions and the entire system.
    Based on my perceived effects of the Preference folder, I needed to uninstall everything, run the Adobe CC Cleaner Tool, download/install just the 2014 releases and see if that resolved the issue. I'm not downloading CC apps, the 2014 releases should run fine on their own. I've yet to confirm this with Adobe, as what I've read has simply said to install the new release next to the CC apps, rather than on top of, as traditional update releases work. Anyway, one by one, I reinstalled the 14 apps that I use on a regular basis on a "clean" machine with no trace of previous Adobe apps.
    After reinstalling (without any plugins), I was at least able to open Premiere Pro from the Application folder and work for a few minutes before both Program and Source monitors froze and had to force quit the app. If I try to open the Project File by double clicking it in the Finder, SpeedGrade opens up instead of Premiere Pro - never seen that before. I also had to force quit to end that process and reopen in Premiere instead of SpeedGrade.
    So back to Premiere, if I do have success in opening a project in the right application, Premiere freezes - if not immediately, eventually it will just stop responding. The video clips, sequence segments and UI freeze, but the audio will keep playing until I force quit. When I force quit, Premiere Pro doesn't close entirely. The UI closes, but the process still runs. I've even force quit from Finder, force quit again from the Dock, Shut Down the machine, restarted and Premiere Pro will still be open, but "Not Responding", so I force quit again and open the project. Just now, I opened PP, made minor edits to a sequence, sent it to Media Encoder, exported, but the video I tested exported without audio. I force quite PP twice just before that and it is still running now, but again, it is "not responding".
    Ultimately, none of this works, nor have my attempts at resolving these many issues. One thing I know is that there is something VERY WRONG with either the latest release/update to 2014 apps, the Preference folder or the permissions that were changed.
    As I mentioned previously, and what I think is a major oversight by someone at Adobe, is that for some reason the permission changes to ONE Adobe folder also effected my entire system and Macintosh HD. Some Kernel Extension files went missing, which is never good and should not happen when resetting folder permissions, so I believe my issues are far greater than the faulty Adobe CC 2014 applications, and is the cause of many of my problems right now. If I can't get things sorted soon, I'm going to reimage my HDD and start from scratch. As much as I would like to avoid this, I really have no choice if I want to get back to work and not lose clients over inexplicable technology issues.
    If I find a solution, I will repost, but I think Adobe has to make some serious fixes on this release before anything is resolved entirely. I pay them monthly and rely on their software and platform to work without issue, which is foolish - I know, but I've used CC since it was introduced and it has work well enough until now.
    Is there anyone at Adobe that can offer some advice??

  • I want to open a project from premiere pro on my mac

    I want to open a project from premiere pro on my mac,the project was edited on a different mac originally.
    Some of the sound from the clips are missing and all the clips are there but when go to a clip in the timeline and press enter it is just black.
    Please help!!!!!!
    P.SIt also askes for RENDERED MFX FILES????

    You may have to go to the original computer and go to the project manager which will let you gather all media to a single folder. Then take that folder to a new computer and edit away.
    As far as black clips. If the media IS located but it shows up black during playback this might mean the file is damaged. This happened to me yesterday and when I opened the file outside of premiere it would not play at all.

  • I have an extensive aperture library on my computer's hard drive and I want to break it up into separate smaller libraries on external hard drives.  How do I take projects from one library and add them to another one?

    I have an extensive aperture library on my computer's hard drive and I want to break it up into separate smaller libraries on external hard drives.  How do I take projects from one library and add them to another one?

    Coastal,
    Frank gave you the exact answer to your question. 
    However, I would like to ask if you are indeed asking the right question.  Do you really want different libraries?  The implications are that you have to "switch" libraries to see what's in the others, and so that your searches don't work across all of your pictures?  If so, then you asked the right question.  If not, you may be more interested in relocating your masters to multiple hard drives so your library gets smaller, instead of breaking up the library.
    nathan

  • How can I down a Adobe Premiere Pro CS6 for mac on a computer with windows7 system?

    How can I down a Adobe Premiere Pro CS6 for mac on a computer with windows7 system?
    Explanations with pics will be better.
    Thanks.

    Not sure what you are asking. A download is a download. what you do with the file afterwards is entirely up to you. If you mean to install Mac software on Win, then no, this can't be done. Furthermore you also would have to have a proper Win serial.
    Order an Adobe product platform swap or language swap
    Mylenium

  • How to import effect plugins from Premiere Pro CC to Premiere Pro CC 2014

    Many of the Premiere Pro CC plugins I've been using since subscribing have disappeared from the effects panel in Premiere Pro CC 2014. For example, under Video Transitions/3D Motion, the only two listed are Cube Spin and Flip Over. None of the others are listed. I tried importing the Factory Presets.prfpset file from CC into CC 2014, but that didn't do anything. How can I import the effect plugins into CC 2014? Thanks.

    Hi
    Have a look at this thread
    How to migrate my effects custom presets from Premiere Pro CC to Premiere Pro CC 2014?
    It worked for me

  • How to use VST Plugins from Premiere Pro CS5 in Adobe Audition 3.0 ?

    I have tried to use VST plugins from Premiere Pro CS5 into Adobe Audition 3.0, but could not use it.Is any method to use them ?

    Unless I'm mistaken, you can't do this at all - Adobe lock all their VST effects so that they only work with the app they were intended for. Which also means, of course, that you can't use Audition VST plugins with any other software either. Since Audition isn't currently in the CS, there isn't even an exception there, I suspect.

  • How to convert project from Premiere Pro into WMV

    Hi,
    As I work on a Mac with Premiere Pro CS6, I have made a project/film and want to play it on a windows machine. But I need to convert this project (mpg2) into WMV. How do I have to do that. Does anyone know?
    Thanks in advance.

    You need 'Flip4Mac' .
    An encoder plugin for QT

  • Importing a project FROM Premiere Pro to FCP - Any alternative to EDL ?

    Hi, when I google this issue - trying to get a project from Adobe Premiere Pro (for instance CS4) to Final Cut I am always terribly frustrated to find only references to the fact that APP imports XML (and now in 4.01 with better support for Final Cut Pro XML). But APP only exports EDL, and that is a very limited platform for talking accross the programs. Does any one have a better solution? Is there any external software for converting an APP project into XML? Can anyone hint as to why Adobe doesn't include "export to xml" in the export menu (like Final Cut Pro so elegantly does) other than fear of people taking their projects and running away to Final Cut Pro (which doesn't make any sense at all, and is no way of dealing with users' needs). Because it would seem that they only want us to be able to move stuff from FCP to APP. But what about us, who desperately need to move in the other direction?! Any light on this matter would be greatly appreciated.
    Cheers and a happy 2009.

    +I would indeed like to do this test. To what email do I send a zipped file to?+
    http://www.automaticduck.com/contact/
    +And also, if I may keep bothering you on this issue: Granted that APP projects are XML, still, Final Cut Pro projects and Avid Projects are NOT XML, they can just interact well with certain forms of XML (type 1,2,3 etc, but apparently not prproj), correct? (a curiosity)+
    Correct, Final Cut Pro project files and Avid project and bin files are not XML. Final Cut Pro has the ability to export and import XML files that are formatted as XML. XML is a flexible file format, the files can web pages, preference files, document files, just about anything. Apple has defined an XML format that can be used to interchange project data with Final Cut Pro. For a lot of good reasons it doesn't make sense for third parties to write or read FCP project files directly so Apple developed a method to write and read project data through another format. XML is an excellent choice because it is so easy to work with, XML files are simply text, easily read and edited and written. Avid systems use another file format for interchange with other manufacturers, AAF. AAF is not XML.
    A lot of editors first heard of "XML" via Final Cut Pro's use of it as an interchange format, so it isn't surprising that these editors equate XML with FCP. It is a bit pedantic of me to drive home the point, but I just want you to clearly understand the issue.

  • How to export EVS MXF from Premiere Pro 5.5

    I'm in the process of delivering a video to a production company that will be airing on CBS Sports in two days. They say they need it in EVS MXF and one of the production guys claims that the MXF formats in Encoder are not what they're looking for. He says the only product he knows of that can convert to the format is "FlipFactory" which is a paid program. I'm in the process of installing the trial version and it's giving me a hard time. I was wondering if anyone knew any workflows or solutions to export 1080p EVS MXF from Premiere. I'm running Windows Vista and the timeline is 29.97 1080p square h.264 mp4 files. Source footage was mostly shot on 5D DSLR and converted to mp4 for ease of editing. Thanks for any help you can give.
    Derek

    Thanks Joe and Jim. I thought it would be my path to success as well but I can't seem to get the trial version working. After installing all the side stuff, it places the shortcut to install the console on my desktop just as the instructions say. When I double-click on it though, IE will not connect to http://localhost:9000. I assume for some reason it's not connecting to the SQL server that it installed but I'm not sure how to force it. Do you have any tips or pointers on getting this part of the installation process to work? I'd contact support but they're gone until Tuesday morning. Thanks again for your help.

  • How to send a project from Final Cut Pro X, to adobe Audition

    Anyone familiar with exporting a project or just audio from FCPX to Adobe Audition?

    Thanx for your reaction. I want to edit Final Cut soundtracks in Adobe Audition and import them back again in FCPX.
    I found out a good workaround.
    First export the project as roles in separate files.
    You can import these files in Audition; edit them etc.
    Simple as that and no extra costs.

  • How do I roll back from Premiere Pro CC 2014.0.1 to 2014.0.0?

    2014.0.1 destroys my ability to upload large files to YouTube which I need to be able to do. The functionality was fine before the new .01 which went online Thursday 7/25.
    Tech Support advised me to uninstall then stop the re-install at 90%. All that did was cancel my re-install.
    I can't believe they broke the YouTube upload as regards large files (greater than 1 hour, it seems). Someone PLEASE try to get back and answer this. I'm dead in the water on an important project. Thanks...
    Jay

    No, YouTube doesn't reject it BUT it complains bitterly that the file is not a streaming file and then it won't process it properly. An example is here: Ridgewood, NJ GONDOLIERS Act 1, Connelly Theater May 18, 2014 - YouTube
    The video was uploaded using essentially the protocol but with the bit rate reduced to 8Mbps. 16 makes files of RIDICULOUS size (exactly DOUBLE) and contrary to the claims on the page describing the 2014.0.1 upgrade 8 Mbps is recommended unless you have an "enterprise-quality" connection.
    I used the word "protocol" to identify the preset where PPro/AME purports to export, say, "YouTube 1080p". My assumption out of the box was that the engineers knew what they were doing. I now believe they didn't test thoroughly before foisting this off on an unsuspecting public.
    Here's how I reached my conclusions. That GONDOLIERS (both acts) is a 2 hour 15 minute show. On July 4 I uploaded the full show to YouTube and one of the performers complained about the use of his name. We immediately pulled the video "private" and I agreed to wait a week or so and then re-upload. Note that the original uploaded fine and displays fine. The link I offered you goes to a video that I predict will never display at full resolution; at current time it is displaying at 360p although uploaded in a beautiful 1080p. I had originally uploaded the larger file at 16GB. YouTube complained that the format wasn't streaming, so I ran it through "MP4 FastStart" which usually cures that, but in this case it didn't. Further testing reveals that the MOOV Atom is going in the right place but I suspect it's not being written correctly on larger files, and that YouTube is having considerable trouble as a result. I then re-uploaded it to YouTube which complained, again, but ingested it...but it didn't create thumbnails (the black&white out-of-focus icon they display until processing is completed, was what came). After several hours (like Act 1 above) it hadn't gone above 360p. The original 8GB file created with 2014.0 I had to reset the MOOV Atom using MP4 FastStart but once I did that it worked perfectly.
    An early troubleshooting test when I realized there was a problem was to take a 1 1/2 minute excerpt which processed perfectly. No demand to use a streaming format; no problem processing or displaying. The problem comes with files of significant size; 2 hours 15, 1 hour 15. 52 minutes worked okay.
    This has NOT been a good weekend. As you read above I had managed to get the older versions of PPro and AME back on my machine. This causes other craziness (the YT full upload is going to take more than 15 hours; due to ANOTHER bug - I think squashed in the newer version - if the CC 2014 file has TITLES from the older CC version, it somehow interferes with processing. My fancy i7-4770K isn't breaking a sweat while this is happening. Usually I'm running at 99% CPU capacity and right now its about 18%. Normally if I see such a throttle-back I assume perhaps a cooling problem but I have none. It's just running beastly slow. I HATE having to work this way...and it doesn't help that it's on a weekend so I can't even get tech involved until Monday.

  • How to send a sequence from Premiere to SpeedGrade?

    When I Direct Link a sequence to SpeedGrade it opens Premiere again after saving the project.
    My SpeedGrade app is on trial version.
    Thank you.

    First, both programs ... PrPro & Speedgrade ... need to be on similar-level releases for the "Link" to work. That's caught a number of people who've not realized their say PrPro is actually back a mini-release or three and the trial of Speedgrade or AeFx is brand-spankin' new.
    Second ... can you start up Speedgrade by itself? If it loads into operating status, you can open a PrPro project/sequence and it will work just like you started from PrPro. I've seen a couple people who had troubles with the Direct to Speedgrade option try this ... and then click the icon upper-left in the Sg window "return to PrPro" and find that somehow their computer just got smart enough to actually like, work. And could then find the two programs and go forth & back with aplomb.
    Anyway, hope you get going. This Direct Link is for most things highly addictive as a workflow ...
    Neil

  • Exporting project from Premiere Pro CS3 to Encore CS3

    If I export and specify no menues and specify burn, medium quality to DVD, Encore asks me to insert blank media into a CD R/W drive. I have to cancel the operation and select the DVD R/W drive that is also displayed in the device delection.. How do I make it default to the DVD R/W drive when asking for blank media?

    Starting with a search is always a good idea... here is some previous discussion
    http://www.adobeforums.com/cgi-bin/webx?128@@.3bc4c6ee

Maybe you are looking for