How to send FCP edited audio clips for processing in Soundtrack?

Hello
How do I send just the edited audio clips from hour long files to be processed in Soundtrack from Final Cut?
I need help as I'm trying to adjust some edited audio clips in Soundtrack Pro but when I send them from FCP to Soundtrack - it opens the whole original audio file and then any adjustments I apply in Soundtrack are being processed over the whole audio file not just the short edited audio clip that I want to adjust.
Normally I don't mind as my scenes are usually short and Soundtrack analysis over the whole scenes audio is usually desirable, but this projects files have been transfered from tapes as hour long AVI files (all the tapes clips transfered into one hour long files) and every FCP edited audio clip I send is being treated as an hour long audio file in Soundtrack.
I'm sure there's a simple answer for settings but I haven't been able to find it. Any advice appreciated.
Barra

Thanks Javi, my sequence is an hour and half duration so what I'm trying to do is save processing time in Soundtrack by just processing adjustments on the few audio clips that need processing.
I have set Soundtrack to open referenced audio only and with 5 sec in and out handles, but it still imports the whole original audio file into Soundtrack timeline upto the selected clip, I then double click in Soundtrack on the clip in brackets, and it then selects just the audio clip I want to adjust, then Soundtrack will just process on the edited clip but when I 'render to action' it seems to apply changes to whole original audio file - taking longer than I want.... frustrating
Also the sound always sounds very different in FCP than Soundtrack even after 'rendering to action' and rendering in FCP... this is not the easy workflow I expect from such expensive software programs, I understood that they work together in a fully integrated way, what's the problem! This is wasting my precious time and preventing me from editing not helping me, this is a common problem and yet I can find no help in the user manual - I'm not impressed!

Similar Messages

Edit audio clip for imovie '09

I want to edit out about 14 seconds of the beginning of a song and
use it in imovie.
how do i do this?

Another way is to do it in iMovie. After dragging the full track into iMovie, simply drag the ends in to shorten the track to the section you want. Then reposition (by dragging) that section to the appropriate spot in your movie.
Just to be clear - when you drag a song into iMovie, drop it onto a thumbnail (not the background) near the position you wish it to play. A green coloured bar will appear just below the thumbnails. This bar can be manipulated as described above.
If you wish to fine tune, use the Clip Trimmer. Access this by clicking on the small gear icon at the beginning of the track. In the panel that opens select "Clip Trimmer" - a window opens showing the waveforms for the audio track. You can drag the yellow handles to highlight/select the piece you want to play. As you do this, you can view the associated video clip in the viewer at the top right of your screen.
John

How do I send a single audio clip to STP without sending master clip too?

Hi there,
I'm trying to clean up production sound in STP using a roundtrip from FCP. When I send a single audio clip to STP as an Audio File Project, the entire master clip is sent (which is as long as the tape.) I thought I'd only be sending the part I had edited into the FCP sequence. Also, in STP there are now left and right audio files (from the original master clip). I only wanted to adjust the sound on one track, not both.
How do I send just a single clip from a single track from the FCP timeline to STP? Should I be sending as an Audio File or Multitrack Project?
Does it matter if the clip was edited into the sequence from a subclip (rather than from a master clip)?
Thanks so much. Any help is appreciated!

If you are planning to edit your sound in Soundtrack Pro, you do a log & capture in FCP not Capture Now. Like FCP Soundtrack Pro brings in the whole file from Media Start to Media End. To nondestructively edit it needs the while file residing on your scratch disk. That's why you log & capture each take unless you're doing something quick & dirty.
If you are working on a documentary & you have 50 plus hrs. of footage it may be too time consuming to log all the individual clips. As an alternative you could do Capture Now & then subclip, export your subclips after renaming them, as a batch list. Dump the original capture file, import the batch list & do a batch capture of the offline clips. Now you have the media in a sensible form that Soundtrack can work with. It's still going to bring the media in from Media Start to Media End but now each of the media starts to ends are a fraction of their original size.
Dave

How can i quick edit Audio( increase bass) of a single file?

Hi everyone,
Im new to FCPX. I have a bunch of videos of music gigs ive played and would like to increase the bass (via equalizer) on most of them. All these videos are already converted into an "Apple Friendly" format and are sitting comfortably in my Itunes Video folder. How can i quickly increase the bass in each video (Without having to tediously export one by one) in FCPX and do a quick overwrite over the original video without having to make an EXTRA file?
THanks

ok.
"Why don't you increase the bass with the equalizer in FCP? Do it to one clip and use paste attributes to apply it to other clips."
1) How do i copy the attributes after making the changes??
2) How do i paste the attributes onto the next file?
Thanks.
Re: How can i quick edit Audio( increase bass) of a single file?

How to save an edited viceo clip in premier elements 11 to my organizer (windows 07)?

How to save an edited video clip in premier elements to my organizer so that I can add teh edited video clip to my slide show on windows 7 operating system?

sanford5
This is not Adobe. We are Premiere Elements users trying to help other Premiere Elements users with their Premiere Elements workflows. Under those conditions, only Adobe may have the opportunity to access your computer in troubleshooting session between you and them. You can use the following link to contact Adobe via its Adobe Chat.
http://helpx.adobe.com/contact.html?product=premiere-elements&topic=using-my-product-or-se rvice
When the link opens, click on the statement "I still need help" to bring up Adobe Chat.
I have no idea if they will charge you a fee for the service ($40 US dollar/hour). It might not even help you (fee or no fee) because you do not have the latest version of Premiere Elements.
What you ask is easy enough. Let me try again with a step by step to see if we can get this working for you in principle and then fine tune the details.
1. Export your Timeline to a file, using Publish+Share/Computer and then one of the choices
Adobe Flash Video, MPEG, AVCHD, AVI, Windows Media, QuickTime, Image, Audio. I do not know what your project settings are, but I am going to guess at NTSC/AVCHD/Full HD1080i30. That would represent 1920 x 1080 @ 29.97 interlaced frames per second.
The following is going to be a mini test run in principle so we will cut to the core and overlook some things.
Go to Publish + Share/Computer/AVCHD/ and set Presets = MP4 - H.264 1920 x 1080p30.
Note that there is a field for Save In: near where you set Presets. Set the Save In for Libraries/Documents not C:\Program Files\Adobe\Adobe Premiere Elements 11. Keep out of the Program Files for matters such as these.
Go to the Elements Organizer 12 File Menu/Get Photos and Videos/From Files and Folders and then browse to and select your MP4 file that you have saved in Libraries/Documents.
You now should have your video represented in the Elements Organizer 12 with a thumbnail.
Please let us know if that works for you. If not, then please let us know where you need supplemental help to get the task completed. I will re-write if necessary.
We will be watching for your results.
Thank you.
ATR
Add On...A little side note for later...If you took your file saved to the computer hard drive and imported that back into Premiere Elements with Premiere Elements' Add Media/Files and Folders, you would get
a. the file imported into a new project
but also
b. a copy of the file automatically placed in the Elements Organizer 12.
If the ideas seem overwhelming, please take the steps on one at a time and follow exactly what is written. You should do fine.

Final Cut Pro X to edit audio programs, for instance an audio podcast?

I am a trial user: Can I use Final Cut Pro X to edit audio programs, for instance an audio podcast?

You could, but GarageBand might be easier.

How do you speed up video clips for Imovie 8?

How do you speed up video clips for Imovie 8?

Do you mean get 55 minutes of real time footage to show in only 55 seconds?
One way that might work but it will take a fair bit of work in multiple repeated steps.
Select all the footage on the timeline and then use the Turtle/Rabbit slider to speed it all up to the maximum speed allowed. This of course won't be any where close to 55 seconds.
BUT... export your movie back out to video tape or to a full quality DV format quicktime file. This speeded up version becomes "normal" time. Now reimport to iMovies. Since this is now normal speed as far as iMovie is concerned, you can again use the slider to speed the whole thing up to the max.
Now just repeat as often as needed to get it as fast as you want. Export back out, reimport, adjust speed, export, import, adjust, etc.
Patrick

How to send JMS Message from a BPM Process

Hi All
I have small query regarding sending JMS Message from a bpm process. Is it possible to send JMS message from one bpm process to another bpm process.
I have a scenario in which I need to send a JMS message to a queue where another process is listening on that queue and as soon as the message is received on the queue the process instance is created.
I know how to listen for the JMS message on the queue, but I don't how to send a JMS message from a process.
Also Can I create process by sending the Notification to the process instead of a JMS message. But the process to be created is not a subprocess i.e. Can notification be send accross different processes.
Any information or example in this regard would be helpful.
Thanks in advance
Edited by: user9945154 on Apr 22, 2009 7:46 PM

Hi,
Here's one approach to sending JMS messages from an Oracle BPM process. If you're doing this just to send a message into another process, do not take this approach. It's far easier and quicker if you do this using the OOTB "send notification" logic.
These steps describe how to do this using WebLogic. The steps would be different if you're using another ap server / JMS provider.
1. Guessing you've already done this, but first expose the two required WebLogic jar files for JMS messaging as Java components in the External Resources. The two files for WebLogic are weblogic.jar and wljmsclient.jar” (located in the < WebLogic home directory > /weblogic/server/lib” directory).
AquaLogic BPM JMS Queue Listener for WebLogic 8.1
2. You've probably already done this, but add an External Resource to represent the J2EE container:
• Name: “weblogicJ2EE” - this is important and will be used in the next step
• Supported Type: “GENERIC_J2EE”
• Initial Context Factory: “weblogic.jndi.WLInitialContextFactory”
• URL: “t3://localhost:7001”
• Principal: and Credentials: whatever userid and password you defined to access theWebLogic administrative console.
3. Create the External Resource that represents the send queue configuration. In this example, I'm calling it “WebLogic Send Queue”. This is important - remember what you named it because you will use this name in the logic that sends the JMS message. This new External Resource is configured as:
• J2EE: “weblogicJ2EE” (same name as the second External Resource you created)
• Destination Type: “QUEUE”
• Lookup Name: “weblogic.examples.jms.exampleQueue”
• Connection Factory Lookup Name: “weblogic.examples.jms.QueueConnectionFactory”
4. Here's the logic to send a Message to the Queue
<pre class="jive-pre"><p />msg as String = "Hello World"
jmsMsg as Fuego.Msg.JmsMessage
msg = "<?xml version=\"1.0\"?><Msg>" + msg + "</Msg></xml>"
jmsMsg = JmsMessage(type : JmsMessageType.TEXT)
jmsMsg.textValue = msg
sendMessage DynamicJMS
using configuration = "WebLogic Send Queue",
message = jmsMsg</pre>
Note that the “sendMessage” method uses the configuration parameter “WebLogic Send Queue”. You previously created a JMS messaging service External Resource with this name in the third step.
Again, please don't go this route if you're just using it to send notifications between processes,
Dan

How to Send an Email to Outlook using process type in RSPC?

Hi,
How to Send an Email to Outlook using process type in RSPC?
We created lot of process variants, actually we want to send an mail to users if the DP Background job was succesfully finished.
Actually i tried with create message its not happening...
Plz let me know .. its urgent ...
Regards,
Satish

Hello Satish,
If you want to send a friendly message to your users, then you can do this by building an ABAP program that calls function module SO_NEW_DOCUMENT_SEND_API1 . You can then insert this ABAP program in your process chain (using the ABAP program process type) or as a second step in your background job. With this technique, you can send an email to SAP users, or to external users (e..g Outlook email addresses)
Here's a sample ABAP code:
data: ls_docdata type SODOCCHGI1,
        lt_objcont type table of solisti1,
        lt_receivers type table of somlreci1,
        ls_objcont type solisti1,
        ls_receivers type somlreci1,
        ls_user type syuname.
* Fill these variables with subject and msg lines that you need.
data: MAIL_SUBJECT     TYPE STRING,
MSG_LINE1     TYPE STRING,
MSG_LINE2     TYPE STRING,
MSG_LINE3     TYPE STRING,
MSG_LINE4     TYPE STRING,
MSG_LINE5     TYPE STRING.
ls_docdata-obj_descr = mail_subject.
ls_objcont-line = msg_line1.
append ls_objcont to lt_objcont.
ls_objcont-line = msg_line2.
append ls_objcont to lt_objcont.
ls_objcont-line = msg_line3.
append ls_objcont to lt_objcont.
ls_objcont-line = msg_line4.
append ls_objcont to lt_objcont.
ls_objcont-line = msg_line5.
append ls_objcont to lt_objcont.
* t_userlist contains the list of users to whom th email will be sent.
loop at t_userlist into ls_user.
    ls_receivers-receiver = ls_user.
"Change the type here if email is for outlook users, See documentation
" of function module in SE37
    ls_receivers-rec_type = 'B'.
    ls_receivers-express = 'X'.
    append ls_receivers to lt_receivers.
endloop.
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
    EXPORTING
      document_data                   = ls_docdata
    tables
     OBJECT_CONTENT                   = lt_objcont
     receivers                        = lt_receivers
   EXCEPTIONS
     TOO_MANY_RECEIVERS               = 1
     DOCUMENT_NOT_SENT                = 2
     DOCUMENT_TYPE_NOT_EXIST          = 3
     OPERATION_NO_AUTHORIZATION       = 4
     PARAMETER_ERROR                  = 5
     X_ERROR                          = 6
     ENQUEUE_ERROR                    = 7
     OTHERS                           = 8
You can test out the function module first in SE37 (just put the name of the FM and click execute). Testing it in SE37 will help you get your parameters right.
Hope this helps.

How can I revert my audio clips that I have edited in Soundtrack Pro back to the original audio?

I edited a project in FCP6 and sent numerous audio clips to Soundtrack Pro where I sampled and removed some AC and fridge compressor
hum from some interview footage. I'm sending the project out for professional sound mixing and they advised me to restore the original
audio to prevent the creation of artifacts when they process the sound in a different program.
Is there some way to "revert" all my clips that I edited in Soundtrack Pro back to the original audio without going back to
my original interview footage and cutting in clip by clip? (Next time I'll save my original audio on a duplicate timeline -- live and learn!)
Thanks in advance for any helpful ideas!

What happens if duplicate the sequence, then choose one of them to use "match frame" to get back to the original clips?
x

How do I play an audio clip embedded in a PDF file in Acrobat DC for iOS?

It looks like playing audio clips from PDF files is currently not available on Acrobat DC for iOS, could this be enabled?
Also it would be nice to be able to pause/restart/stop audio playback, see audio clip length and progress bar and jump to the desired position.
Thanks

Use a SwingWorker:new SwingWorker<AudioClip, Void> () {
    protected AudioClip doInBackground () throws Exception {
        return Applet.newAudioClip (new URL ("http://www.geocities.com/darrylbu/sounds/ringout.wav"));
    protected void done () {
        try {
            get ().play ();
        } catch (ExecutionException ex) {
            ex.printStackTrace();
        } catch (InterruptedException ex) {
            ex.printStackTrace();
}.execute ();Depending on your need, you may want to make that a named class AND/OR assign it to a variable reference and call execute separately AND/OR you may want to call loop () instead of play () inwhich case you may want to assign the AudioClip to an instance field so that stop () can be called from any method.
For a console app, I would have recommended a Thread:new Thread (new Runnable () {
    public void run () {
        try {
            Applet.newAudioClip (new URL ("http://www.geocities.com/darrylbu/sounds/ringout.wav")).play ();
        } catch (MalformedURLException ex) {
            ex.printStackTrace();
}).start ();The same reasoning applies.
Please read the API for anything you're not familiar with, and get back if you have any questions.
db

How do I sync multiple audio clips to one video clip?

I have video (with stereo audio from a camera mic), and for each take, there are also four additional mono audio tracks that line up with it. It was footage shot outdoors in the city, so I guess the filmmakers just wanted to have as many options for sound mixing as possible given how much background noise there would be. I have tried selecting the video clip and the four audio clips at once and selecting "synchronize clips," but it doesn't work. It spits out a synchronized clip that seems to have converted two of the mono tracks into one stereo track... and then disregarded the remaining two mono tracks. It's a mess. It's likely someone else will fine tune the audio once I'm done cutting the video together... but I'd like to get all the audio tracks properly synced from the start. Thanks for any help you can offer.

Do you mean manual syncing? I've been reading this thread about workaround, which aren't working for me: http://forums.creativecow.net/thread/344/21236
But the question they are asking is the same one I am asking. Isn't this a typical situation, having multiple mics for one camera? For example, if someone filmed a concert with one camera but used both the camera audio, and ambient mic, and a mix from the board, then that would be 3 audio tracks with 1 video track. I'm in a similar situation, and I'm finding it hard to believe that FCPX isn't equipped to edit this way. There must be some way to get one video clip (with reference audio) to sync with four audio tracks.

How do you link two audio clips to one video clip?

Hi guys,
I want to think multiple audio clips to one video clip and aint know how to do it! I found this page on Adobe knowledge base:-
http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS1c9bc5c2e465a58a91cf0b 1038518aef7-7f40.html
It says you can do it but I don't think it explains how? Can anyone provide me with the simple steps required to link two audio clips to one video clip? Many thanks.

Do you mean manual syncing? I've been reading this thread about workaround, which aren't working for me: http://forums.creativecow.net/thread/344/21236
But the question they are asking is the same one I am asking. Isn't this a typical situation, having multiple mics for one camera? For example, if someone filmed a concert with one camera but used both the camera audio, and ambient mic, and a mix from the board, then that would be 3 audio tracks with 1 video track. I'm in a similar situation, and I'm finding it hard to believe that FCPX isn't equipped to edit this way. There must be some way to get one video clip (with reference audio) to sync with four audio tracks.

How do you export separate audio tracks for Pro Tools?

I need to give separate audio tracks to my sound mixer but am confused on how to do so in FCP X.
So far I've:
Set the dialogue roles and stems for each character
Then I went into Master File>Settings
Selected:
"Format: Audio Only"
"Audio File Format: Wav File"
"Roles as: Audio only as separate files"
"Dialogue"
Sara
"Stereo"
And when I export and listen back to the wav file, there is either no audio or I hear select dialogue.
The only thing I can think of that I am doing wrong, is that each characters dialogue is not on the same track like the picture below. The tracks highlighted is of one character's dialogue that I am trying to export onto one linear track to export into Pro Tools.
Can tracks be assigned in FCP X? Or is there a crucial step that I am forgetting tthat explains why the audio for each character is not being exported.
Thanks!

If you're dumping audio for ProTools, you should be able to export XML for use in PT. Haven't done it myself, but the option's been there for a while now. You should be able to find instructions easily.
If you want to stick with making Roles work, I suggest making sure the roles are assigned properly to each clip. Kind of a super pain in the neck, to go one by one, but ... that's the way. There are key commands for the three default roles, but if you've created custom ones then it's more time consuming. Is that 'Sara' one a custom Role that you've created?
My only thought is you have compound audio clips there. Maybe go in and set the roles on the individual files inside the compound clips. Dunno...
The visual organization shouldn't matter (one track above another). That's the X way.
((In your picture, you say you have some files selected. When I select, I get a yellow border; yours are light green and dark green. What is that?))

How do I stop background audio clips from playing while browsing sites?

Firefox is my default browser. I use Google chrome and Internet explorer sessions for background monitoring news site sessions at the same time. I have no problem with the other two browsers. While surfing with Firefox I get unwanted background audio clips that start and run by themselves. I cannot stop them. They run and then stop by their self. They are some sort of adware and I cannot find the source to remove them. I also get video clips sometimes that I can stop that run around the outside of the active window I am viewing. These is very annoying. I have uninstalled Firefox and reinstalled it but the problem does not go away. I antivirus software, registry change protection software, and registry cleaning software. The problem is with the default browser.
How can I locate and remove the plugin, addin or service that starts this annoying activity. I have no special unwanted toolbars installed. There is nothing in the installed programs list in the control that shouldn't be there.

I had a similar problem to this. EVERYTIME i started firefox, it would play an audio clip from a flash game i played a while ago, it would last 5 minutes before finishing. i tried the starting in safe mode, but that didn't work for me, so after that i then tried RESETTING firefox, and that has worked for me.
On another side of startup problems, firefox would also open up a new tab on startup, usually 22find.com or do-search.com. i know these are caused by a virus and have since deleted it, but it had changed a preference file in firefox causing it to continue to open on startup.
Having since done the firefox reset, i haven't had either of these problems AT ALL! would recommend this as a possible fix for you friend before trying any lengthy troubleshooting process or downloading any extra anti-virus removal software.
here's the like to showing you how to reset firefox: https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems

How to send FCP edited audio clips for processing in Soundtrack?

Similar Messages

Maybe you are looking for