How to set a fields: commitment item/funds center in migo

i am looking for this fields in migo but i can't find

Hello,
Please kindly check your customizing in the following menu path:
SPRO - Materials Management - Inventory Management and Physical Inventory - Settings for Enjoy Transactions - Settings for Goods Movements (MIGO)
Then you can choose for MIGO or per mvt type. If you have doubts, check the documentation available there.
In addition, please check the note that explains the integration between PSM-FM and MM related to commitment item.
1267998 - FI311 - Common issues related to this error message
I hope it resolves your problem
Best Regards,
Vanessa.

Similar Messages

Reassignment of commitment items & fund centers in open PR, PO & MIGO docs

Hi
We are using Fund Management (BCS) in our system since last one year. Now starting from next fiscal year ( 01.04.2009) we want to replace some of the existing fund centers and commitment items with either newly created fund centers & commitment items or existing ones. We will be changing FM derivation strategy too.
How should one go about it? Whats should be the strategy and procedure for replacing the commitment items & fund centers in open PR, POs & other open document. I know there is option of reassignment of fund centers and commitment items using reassignment derivation strategy. But I am not clear about the steps involved and strategy one should use while doing so.
Pawan

Hello Pawan,
You can also combine reassignment with closing operations (Carryforward with reassignment)
Pls check the link, under 'Closing Operations -> Derivation Strategy for Reassignments with Closing Operations'
By doing so, you can carry forward for example open PO's assigned to given account assingment in 2008 to a new account assignment in 2009
Reassignment programs RFFMCHAN and RFFMCHAT are normally used when Wrongly assigned documents or changes in the responsibility areas of the functional assignment necessitate account assignment changes within the year, or when PSM-FM is implemented later than other components.
I hope this will help
Kind regards
Mar

How to set key fields in a Database view

Hi guru's
iam balaji,plz guide me with how to set key fields in a view.......that field is a non key field in the base table....
thanks in advance,
Balaji.S

take a look at this:
Diagnosis
    In the view, not all of the mandatory fields were included as key
    fields. The key of the view therefore is not unique.
System Response
    All the fields are regarded as key fields in order to guarantee that th
    key lengths are unique.
Procedure
    For views with a large number of fields, this could have a negative
    effect on the performance for the language construction described below
    In this case, all the mandatory key fields should be included in the
    view.
regards

How to set Character field's Format Mask?

dear all,
how to set Character field's Format Mask?
i searched the forum and found the following, where can i use this code and how to change and set its format mask.
SRW.SET_FORMAT_MASK('mask');
Thanks
Muhammad Nadeem

Nadeem,
If you have database 10g, look into function REGEXP_REPLACE. Otherwise you can also try this (you might already know).
SELECT SUBSTR('CHHOCMIPO07020001', 1,2)||'-'||SUBSTR('CHHOCMIPO07020001' ,3,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 5,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 7,3)||'-'||
SUBSTR('CHHOCMIPO07020001' , 10,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 12,2)||'-'||
SUBSTR('CHHOCMIPO07020001' , 14,4)
FROM dual
CH-HO-CM-IPO-07-02-0001
If you have to use this at many places, create a function, pass the raw value, manipulate the string and return.
FS

How to set the field SKB1-FDLEV as requestred-entry in G/L Master data?

Hi All,
Could anyone tell me how to set the field SKB1-FDLEV as requestred-entry in G/L Master data?
Thanks
Gandalf

hi
Go to OB26
select Your criteria ( create, change or display)
double click on it
again double click on Bank/financial details
there you will find the Planning level make it require entry
save
with regards
ramanuja chary

How to set the field non-editable in the classical report..

Hi..
How to set the field non-editable in the classical report..

Hi experts,
For the component 'ICCMP_EMP_SRCH' there is a view 'BUPAEMPSEARCH' , which has 2 context nodes 'CUSTOMER' AND 'SEARCHEMPLOYEE' , i need to add the field 'NICKNAME' which is part of the 'CUSTOMER' context node on the search screen. Currrently all the fields on the screen screen are from the 'SEARCHEMPLOYEE' context node. when i did the configuration , the 'NICKNAME' field is greyed out . I have already generated the Getter ,Setter , GET_I, GET_M methods for the 'NICKNAME' field and the context node and controller class and context class are all active .
on debugging the GET_I method, i see that rv_disabled = 'TRUE' and the current = collection_wrapper->get_current( ) is returning empty value .
for this rv_disabled to be set false , the code below is not triggered since there is no value in current.
IF current->is_property_readonly(
'NICKNAME' ) = abap_false. "#EC NOTEXT
rv_disabled = 'FALSE'.
ENDIF.
when i check for other search fields of context node 'SEARCHEMPLOYEE' , all the fields are set to rv_disabled = 'FALSE'.
can anyone suggest how to approch this. iam i missing any binding between context nodes or any activations ?
The field properties are set as Input field and the display checkbox is not checked.

How to set standart fields in SHIPPING and SALES tables in items?

Hello SDN!
I need to fill some standart fields in CT_SHIPPING and CT_SALES tables (sorry, I don't know their real names, written names used commonly in BADI) for items. I've got a BADI for header (extends IF_EX_CRM_ISA_BASKET_HEAD) and item (extends IF_EX_CRM_ISA_BASKET_ITEM) with methods CHANGEHEAD_BEFORE_ORDER and CHANGEITEMS_BEFORE_ORDER correspondenly. In these methods I try to fill required fields. These fields filled OK for header, but when I tried to fill fields for item it still saved to header. In these tables REF_KIND sets 'B' for item, REF_GUID also sets properly... Can anybody give rules for filling these fields? What main fields (such as REF_KIND) must be set and which values must they have?
version of subject is CRM 5.0 SP 11
Help will be appreciated.
Regards, Lev
Edited by: Lev Kulaev on Sep 8, 2008 9:24 AM
give a version of CRM and give more detailed description of problem

Hello Lev,
Yes, if you have a "fully loaded" order - I mean some good order that has all the business data (such as shipping, sales ord, schedline etc. available. Usually an order that has been created in CRM or downloaded from R/3 should do to understand the data structures.
To start with, just give the Transaction Number as the onl;y input and execute. And read through the output - each set (ET_SHIPPING) etc you are interested in. The several GUID and REF_GUID and REF_KINDs can be better understood with an example than me providing the explanation and code.
An equivalent counterpart to this report program is the CRM_ORDER_READ, which does the same thing but does not let you play with the maintain part. CRM_ORDER_MAINTAIN program allows you to try the ipdate / change / maintain.
Well here is the help text for CRM_ORDER_MAINTAIN
<h5>Short text</h5>
Test program for function module CRM_ORDER_MAINTAIN
<h5>Purpose</h5>
This program replaces the missing option to execute a single test for the function module CRM_ORDER_MAINTAIN.
The usual single test function in transaction SE37 is not possible as sorted tables are used as import parameters. The module RS_COMPLEX_OBJECT_EDIT used from Basis for maintaining import parameters is only able to process standard tables.
<h5>Features</h5>
The report executes a test call of the function module CRM_ORDER_MAINTAIN and displays the result (the export parameters).
In addition, it is possible to
<li>Save the changed data on the database,
<li>Delete the buffer afterwards,
<li>And, by calling CRM_ORDER_READ, to read it again.
<h5>Selection</h5>
<li>Specify the transaction number, the transaction GUID or the item GUID for changing an existing transaction.
<li>Specify how many headers or items are to be created for creating new transactions or items.
<li>Select "Subobject to be maintained" for the subobjects that you wish to change or enter.
<li>After, enter "Maintain input values", and maintain the interface for CRM_ORDER_MAINTAIN. This means you make an entery for the IT_X_COM parameter for subobject X, and make the required entries in the CT_INPUT_FIELDS table.
<li>If you wish to save and initialize after the change, specify this.
<li>If the transaction should be re-read in the buffer afterwards, specify this.
<h5>Standard Variants</h5>
You can save your entries as a variant. All entered data is then stored under a GUID in the INDX table, and can be recovered again by calling this variant.
<h5>Output</h5>
The output parameter for CRM_ORDER_MAINTAIN and, if necessary, for CRM_ORDER_SAVE, CRM_ORDER_INITIALIZE and CRM_ORDER_READ are issued.
Easwar Ram
http://www.parxlns.com

How to set different color for items in selectManyCheckbox

hi,
I would like to change item text background color for each item on selectManyCheckbox (different for each item).
It is only 5 items so that could be static reference or select.
I know only how to change background for all items
af|selectManyCheckbox::item-text {
    background:orange;
How to select concrete item text and change color for only them?
I found similar problem:
css - Set background color of every individual checkbox of p:selectManyCheckbox - Stack Overflow
but this dont work for me because I dont have in adf tr structure
I need somethink like this:
af|selectManyCheckbox::item-text XXXX - select here one of the item by number on list or id {
    background:orange;

hi,
thanks Alejandro and Federico for answers.
I use JDev 11.1.1.6. I dont write it in previously post because I think that is a more css then adf problem.
I have 5 selectItem based on simple List<String> {"text1", "text2", "text3", "text4". "text5"}:
<af:selectManyCheckbox label="List" id="smc2"
                                           layout="horizontal"
                                           value="#{bean.listInBean}"
                                           autoSubmit="true">
                      <af:selectItem label="text1" value="text1" id="si47"/>
                      <af:selectItem label="text2" value="text2" id="si43"/>
                      <af:selectItem label="text3" value="text3" id="si46"/>
                      <af:selectItem label="text4" value="text4" id="si45"/>
                      <af:selectItem label="text5" value="text5" id="si44"/>
                    </af:selectManyCheckbox>
and I would like to color first selectItem text to orange, second to red.. etc, The list is a static list. Not would be changed.
After Alejandro answer I build simple for each element (anyCollection contains item with two fields: textValue and label {(text1,text1), (text2,text2)...}
<af:forEach items="#{bean.anyCollection}"
                                  var="item">
                        <af:selectItem id="si48" value="#{item.textValue}" styleClass="yourClassName#{var.index}"
                                       label="#{item.label}"/>
                      </af:forEach>
And now if I have my var called "item" I can write 5 css style classe yourClassName#{var.index} with different color, but there is a problem:
Attribute styleClass is not defined for af:selectItem
If it will be so simple I will just add 5 style classes for each selectItem
<af:selectItem label="text1" value="text1" id="si47" styleClass="yourClassName0"/>
<af:selectItem label="text2" value="text2" id="si43" styleClass="yourClassName1"/>
Should I use other component then adf facer rich?

How to set screen field in ME_PROCESS_PO_CUST?

Dear all,
I need to set this field 'MEPO1317-MWSKZ' to display only by some criteria. I want to know HOW to do it in ME_PROCESS_PO_CUST
Thanks for your kindly helpful.

Hi Esaki,
1) Define new field selection in configuration "Define screen layout at Document level"
2) write code in fieldselection_item_refkeys as follow
get item data
if your condition
ch_key0 = new field selection
endif
Hope it can help u.
Grace

How to set View for Completed items inside Tasks?

How to set button for 'View' and see Completed items or not completed inside Tasks?

Hi,
You want to set custom views for Tasks folder so that when we click a view button, it will show all Completed or incomplete tasks, am I correct?
Which version of Outlook are you using? There are existing views for completed/incomplete tasks in Outlook. In Outlook 2010 and Outlook 2013, we can find the buttons under View tab > Change View. Click Completed button to view all completed
tasks; Click Active button to view incomplete tasks.
In Outlook 2007, just click View > Current View to switch between different views.
If I've misunderstood something, please feel free to let me know.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to set the field size in rule file.

i have to map total 30 fields in a rule file while by default it allows only 20 fields. so how can we set the fields as per our need?

Hi Dharmendra Ojha,
Essbase rule file does not constrain you with only 20 fileds.
When you click on 'create a rule file', by default it ll show you 20 fileds .But , when you open a data file ( in your case , you data file has 30 columns i.e 30 fields) in the data prep editor , you ll see all 30 fileds .
So ,you have to do nothing to increase the filed count , rule file will automatically show all fields .
Revert back for further clarity
Sandeep Reddy Enti
HCC
http://analytiks.blogspot.com

How to set default field values in customer master data.

hi,
I want to set default values in customer master data (account group wise).
but
I don't know how to set it .
please help me.
(I don't want to change field status in account group rather than I want to set default values for field. )
thank you.

hi,
this is to inform you that,
in SAP there is no such a provision.
but
in LSMW there is an option of CONSTANT VALUES.
check in SHD0 - also
please check and confirm
balajis\a

How to set User-field in Plan order

Hi
could you tell me please how to set a user-filed in plan order. when I run MRP planing, I can write some data in this filed.
thanks
henry

Hi,
Actually these user defind fields are used/assigned in the routing.
Initially u have to define your own user defind profile through OPEC transaction.
Assign this profile in the routing.
So when ur executing Mfg activities, suppose if ur using some high materials like silver...etc.
Then after executing the particular operation some amount of silver chips or silver scrap will generated .
To keep chip/scrap qty operation and date which user defind is used.
Once u have assigned this profile to routing, then it will be automatically copied in the planned order/production order.when ur confirming the order then u have to enter the all related data.
Regards
Vijay

How to Set Value of page item?

String dimLayoutNew[][] = new String[3][];
dimLayoutNew[0] = new String[1];
dimLayoutNew[1] = new String[1];
dimLayoutNew[2] = new String[2];
dimLayoutNew[0][0] = measureString;
dimLayoutNew[1][0] = strDimension1;
dimLayoutNew[2][0] = strDimension2;
dimLayoutNew[2][1] = strDimension3;
Boolean applyNewLayoutFlag = tableQuery.layout(dimLayoutNew);
In this Layout,How to set the value of strDimension2 page item to one member of strDimension2?
thanks!

what about this - look up the javadoc to get more >info ....You would have to admit, while BI Beans are great, the documentation is a little light.
int targetHPos[] = targetDataAccess.getEdgeCurrentHPos (2);
now apply the order to the targethpos as you like...now, once you make your changes to the targetHPos, how does one actually make the change to the Query object (i.e. what method does one need to call to pass the new targetHPos in??) I looked through the JavaDoc and didn't see a SetCurrentHPos or equivalent function in the DataAccess Class. Is there one?
Also, what role, if any, should the SetCurrentPage method of the query object play if I'm not using it correctly?

How to set "like" field of the query in statements

Hi,
Im trying to set the "like" field of the statement.but it is not executing as expected.Could anybody please tell me,"how to set the like field in statements.
Here is my code.
PreparedStatement psum=con.prepareStatement("select count(bill_amount) from master where bill_date like ? and whos_bu=?");
String myStr=month+"/??/"+year;
psum.setString(1,myStr);
psum.setString(2,employeeTray[1]);
ResultSet rs=psum.executeQuery();

Tnx a lot vidyut .using % is working.
Could you plz tell me why the previous one using question mark is not
working. using quesion mark is correct as per the query syntax.and also i tried with asterisk,it is also not working.
ps:have some duke dollars.

How to set a fields: commitment item/funds center in migo

Similar Messages

Maybe you are looking for