How to set a global configuration for Value Interaction

Hi there
i have this problematic situation about some of my dashboards, cause i need to set the same configuration for all of them in the part of the value interaction,
some of there have in the "default situation" drill and others have "navigation"
exist a config for this?
regrats

Hello Pavel,
>> … and then on the login page I created a process …
A typical APEX login page includes a process called Clear Page(s) Cache, with a sequence of 30. If the process you have create has a higher sequence (>30) it will see a null page values as they have been cleared already.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Similar Messages

How to set the correct configuration for K7N2G (MS-6570)

Hello all
I have one of two problems
1. I have a problem whereby I have recently purchased a K7N2G (MS-6570) with Athlon XP 2800 256kb cache 333mhz cpu.
I have fitted it inside the motherboard and when I start the computer it says that I have a Athlon XP 1350? -Please, what settings would I need to change so that the motherboard identifys my CPU properly?
2. I moved my old hard drive to my new computer and when I leave the computer to carryon booting through to the operating system it displays an error message that the EMM 386 manager wasnt installed? and I have to intervene so it can continue. Is it because I am using DDR memory 256 or that the settings on the motherboard havent been set yet properly?
Please aid me,
many thanks.

HI
Thanks it worked but i have one more problem
it says
EMM386 not installed - unable to set page frame base address
? what does this mean and how can i fix it?
I am using win98 operating system

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

How to set-up a Timestamp for BI Delta Load in 0CLM_INVOICE datasrc at R/3?

Hi Experts,
Kindly let me know How to set-up a Timestamp for BI delta load at R/3 for the Data source 0CLM_INVOICE ?
Since the Timestamp for Upload of BI Delta is " . . : : ", we are not getting any delta value to BW.
I would like to know in where we need to maintain the DATE & TIME to fix the above problem.
Thanks.
Regards,
Jayaprakash J

Dear Jayprakash,
Chech the below links, it may help you in your case :
Re: 0FI_AA_11 Delta load failure
http://wiki.sdn.sap.com/wiki/display/BI/GeneralErrorIn+BI
Actaully you need not have to maintain the timestamp. Just try to replicate your datasource and the try to load the delta again.
Hopefully it will work.
Regards,
Rahul
Edited by: Rahul on Dec 10, 2010 10:23 AM

How to setup a global artwork for a TV Show

Hi, I've a TV Show composed by 45 episodes where each one have his artwork but I don't know how to setup a global artwork for the TITLE of the TV Show while retaining the 45s artworks.
ie. when watching the Tv Shows (library on iTunes) I would like to see the global artwork of the Tv Show that is different of the other 45s episodes contained.
Bye, Roberto.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

In XI 3.0 how to set up Alert configuration......

Hi All
     I am new to XI and Pls..help me on this
     How to set up Alert Configuration in XI 3.0 (SP 9)
     What are the settings i need to do in RWB... For particular Purchase order
     How to set up the alert configuration ?
Thanx in advance
Prasad K

Hi,
Please check these links, here you can find something:
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
/people/ginger.gatling/blog/2005/12/02/innovative-ways-to-use-alerts
/people/bhavesh.kantilal/blog/2006/07/25/triggering-xi-alerts-from-a-user-defined-function
/people/alessandro.guarneri/blog/2006/01/26/throwing-smart-exceptions-in-xi-graphical-mapping
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7f2243d711d1893e0000e8323c4f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/f2bbc8142c11d3b93a0000e8353423/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5d/2166e6a91d11d188de0000e8216438/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/05/bb223905b61b0ae10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
Regards,
Wojciech

How to set a date range for date field ?

Dear Experts,
Scenario:
I have a query in validating the date field in my BSP application. My application is for maintain infotype 0023 Other/Previous Employers online by employees in the company.
As per our design we are maintaining the all employment details of the employee both ( with in the current company / previous employment outside the company) in the same infotype.
Every employee will have a hiring date within the SAP HR system. We consider this date as the cutoff date between current and previous employment in our application. When the employee updating the details wia BSP page I need to check the following.
Record inside current company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) greater than or equal HIRING DATE and END DATE(ENDDA) should be greater than FROM DATE (BEGDA).
Record outside current Company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) less than or equal HIRING DATE and END DATE (ENDDA) should be greater than FROM DATE (BEGDA) and less than HIRING DATE.
Technical Requirement:
How to set a date range for date field, i.e. how we can limit the date range in a HTMLB date field? Can this it be achieved via standard functionality of HTMLB?
Following is the code to describe date field in my application.
 <htmlb:inputField id= "ENDDA_NEW_IN"
 type= "date"
 doValidate= "TRUE"
 showHelp= "TRUE"
 disabled= "FALSE"
 width= "183"
 style= "cssTextAreadate"
 value= "<%='99991231'%>"/>
Thanks a lot in advance for your assistance and help.
Cibinu2026
Edited by: cibin kuruvilla on Nov 12, 2008 11:13 AM

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

How to set to-mode to Fixed Value and give a date in RSDV transaction

Hi
I am working in BI7.0 environment. I am deploying HR Reporting Project. I need to load data to HR Info Cube 0PAPA_C02, to do this I need to maintain validity slice (RSDV transaction) for the Info Cube. After first load I need to set "to-mode-'Fixed Value'" and give a date such as 31.12.9999.
Can anyone please let me know the steps on how to set- to mode to Fixed Value in RSDV.
Thanks

Here's the basic steps to follow:
1) Go to tcode RSDV, enter the InfoCube name (0PAPA_C02) and Execute.
2) If there is data already in the InfoCube you will get a validity table with default validty dates from 0CALDAY.
3) Click on the Display/Change button so that you're in change mode and edit the validity date to be 31.12.9999.
4) In the To-Mode column, set the value to 'F' for fixed.
5) Put the fixed date value (31.12.9999 in your example) in Fixed to time.
6) Click on Save.

Sun ONE Studio 4 aka Forte: How to set the output path for classes ?

Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
Rolf

You can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set!

How to set displayed column width for a search help

I have created an elementary search help for a custom field with a value table behind it.
The search help functions correctly, but when displayed the column widths are all 10 characters. The user has to adjust the column to view the descriptive text.
Can anyone tell me how to set default column widths for the help?

Please open you Elementary search help and see the Column width behind the Fields of your ...there increase the width of the fields
"Activate it and refresh
reward points if it is usefull .....
Girish

How to set transaction isolation level for a method in a Local Interface

 By reference at:
 http://e-docs.bea.com/wls/docs61/ejb/reference.html#1071267,
 the value for method-intf can only be "Remote" or "Home".
 My question is--
 How to set transaction isolation level for a method inside a Local Interface or
 Local_Home Interface?
 Thanks.
 Xing


I'd try 6.1SP2. I'm pretty sure this works now.
 -- Rob
 Xing wrote:
 > I tried "Local", but got an error when deploying the EJB jar, saying that only
 > "Remote" or "Home" is allowed.
 >
 > Any idea?
 >
 > Xing
 >
 > Rob Woollen <[email protected]> wrote:
 > >
 > >
 > >Use LocalHome or Local.
 > >
 > >-- Rob
 > >
 > >Xing wrote:
 > >
 > >> By reference at:
 > >> http://e-docs.bea.com/wls/docs61/ejb/reference.html#1071267,
 > >> the value for method-intf can only be "Remote" or "Home".
 > >>
 > >> My question is--
 > >>
 > >> How to set transaction isolation level for a method inside a Local
 > >Interface or
 > >> Local_Home Interface?
 > >>
 > >> Thanks.
 > >>
 > >> Xing
 > >
 > >--
 > >
 > >----------------------------------------------------------------------
 > >
 > >AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
 > >
 > >by Michael Girdley, Rob Woollen, and Sandra Emerson
 > >
 > >http://learnWebLogic.com
 > >
 > >
 > >
 > >
 > ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 > ><html>
 > >Use LocalHome or Local.
 > >-- Rob
 > >Xing wrote:
 > ><blockquote TYPE=CITE>By reference at:
 > > http://e-docs.bea.com/wls/docs61/ejb/reference.html#1071267,
 > > the value for method-intf can only be "Remote" or "Home".
 > >My question is--
 > >How to set transaction isolation level for a method inside a Local
 > >Interface
 > >or
 > > Local_Home Interface?
 > >Thanks.
 > >Xing</blockquote>
 > >
 > ><pre>--
 > >
 > >----------------------------------------------------------------------
 > >
 > >AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
 > >
 > >by Michael Girdley, Rob Woollen, and Sandra Emerson
 > >
 > >http://learnWebLogic.com</pre>
 > > </html>
 > >
 > >
 AVAILABLE NOW!: Building J2EE Applications & BEA WebLogic Server
 by Michael Girdley, Rob Woollen, and Sandra Emerson
 http://learnWebLogic.com
 [att1.html]

How to set the connection parameters for SQL

How to set the connection parameters for SQL to access the MS Access database
Attachments:
Quick_SQL.vi ‏21 KB
Doc1.doc ‏45 KB
db1.mdb ‏112 KB

Right-click the WINDOWS desktop, choose New->Microsoft Data Link. That will bring up a dialog that allows you to configure and test your database connection. You might connect to the Access database via ODBC or directly via Jet Engine. The Jet Enginge saves you the trouble of creating an ODBC connection on your PC. After you leave the dialog, the "data link" will show up on your desktop as text file. Open it and copy-paste the connection string to your VI.
This webpage is an excellent resource for connection strings: http://www.able-consulting.com/ADO_Conn.htm
If your application requires users to change the database connection at runtime, you can also include the dialog via ActiveX (MSDASC.IDataSourceLocator).

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

"I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library. Can't find it. Thanks

"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!

From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb

How to set a global configuration for Value Interaction

Similar Messages

Maybe you are looking for