How to set an attached USB drive to automatic sleep using Airdisk?
Greetings all!
I am looking for a way to set my two USB drives to sleep when they are not being used. I only use them a few minutes a day, and don't want to run them down or use the electricity to keep them spinning.
It seems there has been some discussion about this but I haven't been able parse all the conversations. Some people seem to have gotten it to work, while others are relying on a drives "internal" mechanisms. It would be great if someone (perhaps at Apple?) could chime in with an overview of the problem.
Perhaps it is linked to the method of authentication - ie., (using Airport Utility 5.1), whether the Disks > File Sharing > "Secure Shared Disks" > is with "disk password" or another method?
Some have suggested a radio button for a future firmware/other update such as:
"Set drives to sleep when not in use" (Let's hope for this!), but I am hoping for a simple solution in the near future.
Any thoughts out there?
best to all.
*NB: I first posted this on Posted: Apr 4, 2007 12:23 AM and got NO response at all - hopefully I'll have more luck this time !
Hello Andy,
Thanks for your reply.
1. For using Microsoft Outlook rules, we need to keep the computer on, even after work or the colleague is on leave. That is not allowed in my company.
2. For sending an auto-reply email based on subject, that is impossible because the emails from customers are different and we don't have a basic standard.
3. Could you please elaborate how to set a transport rule in Exchange server to achieve the goal?
Thanks a lot in advance.
Steven
1. Only client rules require that the Outlook client remain open. An auto-reply rule should be server-side, so no need to leave Outlook open.
2. Yep!
3. Walk through the hub transport rules and you see one that replies with a rejection code. Thats the best you can get with a hub transport rule and not something I would recommend in your scenario. You could also search around for 3rd party solutions.
Twitter!:
Similar Messages
-
How do I set up my USB drive to work on airport
How do I set up my USB drive to work on airport
First be sure that your external USB HDD is formatted in either HFS+ or FAT32 as these will be the only two disk formats that the Extreme can share out to network clients.
Once you verified the format, you just need to connect the HDD to the USB port on the Extreme. Finally you would use the AirPort Utility to enable the HDD for sharing.
For AirPort Utility v6.x: Start the utility > Select your AirPort Extreme > Select Edit > Select the Disks tab. Verify that the utility correctly identifies your HDD. Then select (check) the "Enable file sharing" option, and then, select Update. After the base station updates, you should be able to "see" the shared HDD in Finder on your MacBook Pro. -
Attaching USB drive causes EX4 to become unresponsive.
Hello, I have tried to setup a usb to nas backup a few times and keep having the same problem. Upon attaching the 4TB usb drive (usb 3.0) to the back of the EX4 the NAS becomes unresponsive. I can no longer access it from the dashboard or the my cloud app on a mobile device. The app says it is offline. The ex4 is on but no drives are spinning. The usb drive is spinning however.
Once, I was able to see the EX4 and the attached USB drive in my file explorer. It showed the USB drive as a share. It said something like "Share 2_1." However the internal folders were not visible. Then the EX4 froze and went unresponsive - which caused me to try and manually shut it down. It did not power down and after making sure no data was being transferred I had to pull the power (as recommended on this forum).
Once I was able to get as far as setup up a USB to NAS backup on the dashboard. I set up the source and destination folders, etc. upon saving the job the EX4 is inaccessible, while the USB drive spins.
What's going on? Is it taking a long time to index the attached drive? Is it not compatible with the USB drive (seagate 4tb external NTFS USB 3.0)?
Any insight or advice would be great. Thanks!By default the EX4 will scan the attached USB share for media. This process takes all the CPU of the EX4 for long periods of time, and can also lead tot he creation of numerous metadata directories in your attached drive. You should turn this off. In addition, if you use the USB drive for backups, the DEFAULT option for the EX4 is to commence backups when the drive is connected. This setting can be turned off in the GUI setup for the backup jobs. In addiiton, in my experience, NTFS drives take more overhead than EXT formatted drives.
-
I have set upmthe Airport Extreme and all is well, except I do not understand how to access the USB Drive. I am using a PC and two IOS Devices
An App like Filebrowser will allow your iOS devices to browse files on the hard drive.
Stratospherix - Products - FileBrowser - Overview -
How to set up an USB game controller
How to set up an USB game controller on a mac? I am at wits end! Need some help?
If you already have an iTunes account, simply use that. You do not need a new account.
Open the iTunes app on the iPad. Go to the bottom of the screen and tap Sign in. -
How to set the oracle oci8 driver?
hello all:
I've set up the oracle thin driver and it works. but when I change to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
at weblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regardsHello, Jenny I am glad you found your resolution. I too am having problems isung
the oracle 0CI8 driver. My connection pool is creating fine, but my server is
crashing with JVM errors.
Here are my configurations.
DBase=Oracle 8.1.7,OS=Win2000, running 6.1 with Portal 4.0
pool config =
<JDBCConnectionPool CapacityIncrement="0"
DriverName="oracle.jdbc.driver.OracleDriver" InitialCapacity="5"
MaxCapacity="5" Name="ccConPool"
Properties="jdbc.url=jdbc:oracle:oci8:@servername:1521:orcl;user=XXXXX;password=XXXXXX;dll=ocijdbc8;server=orcl;protocol=oci8;dll=ocijdbc8;protocol=oci8"
RefreshMinutes="0" Targets="portalServer"
TestTableName="WIP_TABLE" URL="jdbc:oracle:oci8:@servername"/>
My classpath sets my classes12.zip file first. My path sets %WEBLOGIC_HOME%\bin\oci817_8
and %WLCS_ORACLE_HOME%\bin.
Am I setting the right dll and protocol in my .dll? Where can I find documentation
on these properties definitions?
"jenny" <[email protected]> wrote:
hello all:
I've got the answer. those all because weblogic.jar. this jar include
the
class "oracle.jdbc.driver.OracleDriver".
although I put the classes12.zip into the CLASSPATH.but the weblogic.jar
in
front of classes12.zip.so classloader
load the class from weblogic.jar. so I can use thin driver(weblogic
implements this function with class,but not for oci8 )
..this is really a big pitfall !
put the classes12.zip in front of weblogic.jar .all perfect!
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
below is some chapters of my config.xml and startWeblogic.cmd
the oci8 :
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool" Password="{3DES}J3XuQd6cvvw="
Properties="user=yanji;password=yanji;dll=ocijdbc8;protocol=oci8"
Targets="myserver" TestTableName="test"
URL="jdbc:oracle:oci8:@pg01"/>
the thin :
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="citcpool" Password="{3DES}J3XuQd6cvvw="
Properties="user=yanji;password=yanji"
SupportsLocalTransaction="true" Targets="myserver"
URL="jdbc:oracle:thin:@sune250:1521:pg01"/>
:runWebLogic
echo on
set ORACLE_HOME=e:\oracle
set PATH=./bin;%ORACLE_HOME%\bin;%ORACLE_HOME%\lib;%PATH%
set
CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar;.\lib\dom.jar;.\lib\xml
4j.jar;.\lib\jecf.jar;%ORACLE_HOME%\jdbc\lib\classes12.zip
echo off
the thin driver is ok,but the oci driver can not work!
if I've set the wrong CLASSPATH or PATH , the thin driver and oci8driver
must have not worked. I confused!
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
Its not CLASS_PATH it should be CLASSPATH.
when you say oracle\bin and oracle\lib , on what driver is the oracle
folder?I meant to say 'on what drive' not 'on what driver'
you have to specify the full path.
post your startup script here.
sree
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
I've set the ORACLE_HOME,and CLASS_PATH,but nothing changed. I will
go
to
crazy!!!
when startup the weblogic,I've seen the oracle\bin and oracle\libin th
"path" and classes12.zip in the CLASS_PATH.but the errors stillappears!!
"Sree Bodapati" <[email protected]> wrote in message
news:[email protected]...
1. Dont copy this file oci8jdbc.dll, to bin folder. Make sure
you
place
<oracle_home>\lib in your PATH before starting the server. Make
sure
your
ORACLE_HOME environment varable is set to <oracle_home> folder.
eg. set ORACLE_HOME=c:\ora816 before starting the server.
so you must have done something like
set ORACLE_HOME=c:\ora816
set PATH=%ORACLE_HOME%\bin;%ORACLE_HOME%\lib;%PATH%
2. double check if you set your CLASSPATH something like this,
CLASSPATH=%ORACLE_HOME%\jdbc\lib\classes12.zip;%CLASSPATH%
in the server startup script just before starting the server.
3. start the server the connection pool should work.
hth
sree
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello All:
I've edited the StartWeblogic.cmd, set the classes.zip into CLASSPATH,and
copied the oci8jdbc.dll to the bea\wlserver6.1\bin. errors stillappears!
my weblogic version is 6.1 and oracle is 8.1.6 .
why the thin driver is ok but the oci driver can not work?
I logined in the oracle website and look for the jdbc.but I find
that
jdbc
all provide for jdk1.2 or jdk1.1. because the weblogic6.1 based
jdk1.3.
I
think i can not use those drivers.
I think my oracle driver is ok,because i installed the jboss and
bas4.5
in
my computer. they all can use oci8 driver properly.and they all
based
jdk1.3.
by the way. I 've tryed added the oracle\bin path inStartWeblogic.cmd,
nothing changed !
again below is my config : I want to know whether my config right?
(the property DLL and Protocal auto added by the weblogic)
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji;dll=ocijdbc8;protocol=oci8"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
best regards
----- Original Message -----
From: "Mitesh Patel" <[email protected]>
Newsgroups: weblogic.developer.interest.jdbc
Sent: Thursday, December 13, 2001 4:00 AM
Subject: Re: how to set the oracle oci8 driver?
To use oracle oci8 driver:
You should have classes12.zip in weblogic classpath.
You should have ocijdbc8.dll in your weblogic path..
You can download ocijdbc8.dll from oracle website.
Mitesh Patel
jenny wrote:
hello all:
I've set up the oracle thin driver and it works. but when I
change
to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
atweblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
atweblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regards
"jenny" <[email protected]> wrote in message
news:[email protected]...
hello all:
I've set up the oracle thin driver and it works. but when I change
to
oci8.it don't work
below is config and errors:
<JDBCConnectionPool DriverName="oracle.jdbc.driver.OracleDriver"
InitialCapacity="5" LoginDelaySeconds="5" MaxCapacity="15"
Name="ocipool"
Properties="user=yanji;password=yanji"
Targets="myserver" URL="jdbc:oracle:oci8:@pg01"/>
Could not load 'oracle.jdbc.driver.OracleDriver
If this is a type-4 JDBC driver, it could occur if the JDBC
driver is not in the system CLASSPATH.
If this is a type-2 JDBC driver, it may also indicate that
the Driver native layers(DBMS client lib or driver DLL)
have not been installed properly on your system
or in your PATH environment variable.
This is most likely caused by one of the following:
1. The native layer SO, SL, or DLL could not be found.
2. The file permissions on the native layer SO, SL, or DLL
have not been set properly.
3. The native layer SO, SL, or DLL exists, but is either
invalid or corrupted.
For more information, read the installation documentation
for your JDBC Driver, available from:
http://e-docs.bea.com
atweblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection
ectionEnvFactory.java:208)
atweblogic.jdbc.common.internal.ConnectionEnvFactory.createResource
ectionEnvFactory.java:131)
atweblogic.common.internal.ResourceAllocator.makeResources(Resource
ator.java:698)
atweblogic.common.internal.ResourceAllocator.<init>(ResourceAllocat
va:282)
best regards -
How to set BIOS for USB boot on Satellite A50-110?
Hi.
I own a Toshiba Satellite A50-110 and I have a bootable USB flash drive, but I don`t know how to boot from this USB drive.
I suppose I need to access and configure BIOS. How can I do it? Where do I get information about this? What are the steps to complete this task?
TIAHello
As far as I know in BIOS cannot be configured anything. As far as I now on this old notebook you can use just USB floppy disc drive for boot up (press U key at start up) but not USB flash drive.
Enter BIOS settings with ESC key at the start up and check all listed bootable devices. -
How to synchronise folders in USB drives to macbook harddisk folder
How to synchronize folders - from USB drive to a documents folder?
Here's a fairly inexpensive solution - http://www.greenworldsoft.com/sync-folders-pro-help.html.
Clinton -
How to set a specific width to all the TextInputs used in a mxml file on its creation complete?
Hi subhajit nag,
I think the best approach would what I say is if you can make use of a Global variable or using a Singleton class having a variable which can be accessed globally through out the application.
Below is the sample what I am talking to:
So in below example you can access the variables textInputWidth and textInputHeight globally throghout the application since you have decalred them in main mxml file.
You can access these variabled in another mxml file as Application.application.textInputWidth and Application.application.textInputHeight. So if at all you are required to modify these values you are only required to modify at a single place in main mxml file..thats it.
If you are use any Singleton classes like ModelLocator you can place these variables in this class and refer from that class.
Hope this resoved your problem..
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
<mx:Script>
<![CDATA[
[Bindable]private var textInputWidth:int = 250;
[Bindable]private var textInputHeight:int = 25;
]]>
</mx:Script>
<mx:Canvas id="canvas1">
<mx:TextInput id="txt1" width="{textInputWidth}" height="{textInputHeight}"/>
</mx:Canvas>
<mx:Canvas id="canvas2">
<mx:TextInput id="txt2" width="{textInputWidth}" height="{textInputHeight}"/>
</mx:Canvas>
<mx:Canvas id="canvas3">
<mx:TextInput id="txt3" width="{textInputWidth}" height="{textInputHeight}"/>
</mx:Canvas>
<mx:TextInput id="txt4" width="{textInputWidth}" height="{textInputHeight}"/>
<mx:TextInput id="txt5" width="{textInputWidth}" height="{textInputHeight}"/>
</mx:Application>
If this post answers your question or helps, please kindly mark it as such.
Thanks,
Bhasker Chari -
How to set the correct shared pool size and db_buffer_cache using awr
Hi All,
I want to how to set the correct size for shared_pool_size and db_cache_size using shared pool advisory and buffer pool advisory of awr report. I have paste the shared and buffer pool advisory of awr report.
Shared Pool Advisory
* SP: Shared Pool Est LC: Estimated Library Cache Factr: Factor
* Note there is often a 1:Many correlation between a single logical object in the Library Cache, and the physical number of memory objects associated with it. Therefore comparing the number of Lib Cache objects (e.g. in v$librarycache), with the number of Lib Cache Memory Objects is invalid.
Shared Pool Size(M) SP Size Factr Est LC Size (M) Est LC Mem Obj Est LC Time Saved (s) Est LC Time Saved Factr Est LC Load Time (s) Est LC Load Time Factr Est LC Mem Obj Hits (K)
4,096 1.00 471 25,153 184,206 1.00 149 1.00 9,069
4,736 1.16 511 27,328 184,206 1.00 149 1.00 9,766
5,248 1.28 511 27,346 184,206 1.00 149 1.00 9,766
5,760 1.41 511 27,346 184,206 1.00 149 1.00 9,766
6,272 1.53 511 27,346 184,206 1.00 149 1.00 9,766
6,784 1.66 511 27,346 184,206 1.00 149 1.00 9,766
7,296 1.78 511 27,346 184,206 1.00 149 1.00 9,766
7,808 1.91 511 27,346 184,206 1.00 149 1.00 9,766
8,320 2.03 511 27,346 184,206 1.00 149 1.00 9,766
Buffer Pool Advisory
* Only rows with estimated physical reads >0 are displayed
* ordered by Block Size, Buffers For Estimate
P Size for Est (M) Size Factor Buffers (thousands) Est Phys Read Factor Estimated Phys Reads (thousands) Est Phys Read Time Est %DBtime for Rds
D 4,096 0.10 485 1.02 1,002 1 0.00
D 8,192 0.20 970 1.00 987 1 0.00
D 12,288 0.30 1,454 1.00 987 1 0.00
D 16,384 0.40 1,939 1.00 987 1 0.00
D 20,480 0.50 2,424 1.00 987 1 0.00
D 24,576 0.60 2,909 1.00 987 1 0.00
D 28,672 0.70 3,394 1.00 987 1 0.00
D 32,768 0.80 3,878 1.00 987 1 0.00
D 36,864 0.90 4,363 1.00 987 1 0.00
D 40,960 1.00 4,848 1.00 987 1 0.00
D 45,056 1.10 5,333 1.00 987 1 0.00
D 49,152 1.20 5,818 1.00 987 1 0.00
D 53,248 1.30 6,302 1.00 987 1 0.00
D 57,344 1.40 6,787 1.00 987 1 0.00
D 61,440 1.50 7,272 1.00 987 1 0.00
D 65,536 1.60 7,757 1.00 987 1 0.00
D 69,632 1.70 8,242 1.00 987 1 0.00
D 73,728 1.80 8,726 1.00 987 1 0.00
D 77,824 1.90 9,211 1.00 987 1 0.00
D 81,920 2.00 9,696 1.00 987 1 0.00
My shared pool size is 4gb and db_cache_size is 40Gb.
Please help me in configuring the correct size for this.
Thanks and Regards,Hi ,
Actually batch load is taking too much time.
Please find below the 1 hr awr report
Snap Id Snap Time Sessions Cursors/Session
Begin Snap: 6557 27-Nov-11 16:00:06 126 1.3
End Snap: 6558 27-Nov-11 17:00:17 130 1.6
Elapsed: 60.17 (mins)
DB Time: 34.00 (mins)
Report Summary
Cache Sizes
Begin End
Buffer Cache: 40,960M 40,960M Std Block Size: 8K
Shared Pool Size: 4,096M 4,096M Log Buffer: 25,908K
Load Profile
Per Second Per Transaction Per Exec Per Call
DB Time(s): 0.6 1.4 0.00 0.07
DB CPU(s): 0.5 1.2 0.00 0.06
Redo size: 281,296.9 698,483.4
Logical reads: 20,545.6 51,016.4
Block changes: 1,879.5 4,667.0
Physical reads: 123.7 307.2
Physical writes: 66.4 164.8
User calls: 8.2 20.4
Parses: 309.4 768.4
Hard parses: 8.5 21.2
W/A MB processed: 1.7 4.3
Logons: 0.7 1.6
Executes: 1,235.9 3,068.7
Rollbacks: 0.0 0.0
Transactions: 0.4
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: 100.00 Redo NoWait %: 100.00
Buffer Hit %: 99.66 In-memory Sort %: 100.00
Library Hit %: 99.19 Soft Parse %: 97.25
Execute to Parse %: 74.96 Latch Hit %: 99.97
Parse CPU to Parse Elapsd %: 92.41 % Non-Parse CPU: 98.65
Shared Pool Statistics
Begin End
Memory Usage %: 80.33 82.01
% SQL with executions>1: 90.90 86.48
% Memory for SQL w/exec>1: 90.10 86.89
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
DB CPU 1,789 87.72
db file sequential read 27,531 50 2 2.45 User I/O
db file scattered read 26,322 30 1 1.47 User I/O
row cache lock 1,798 20 11 0.96 Concurrency
OJVM: Generic 36 15 421 0.74 Other
Host CPU (CPUs: 24 Cores: 12 Sockets: )
Load Average Begin Load Average End %User %System %WIO %Idle
0.58 1.50 2.8 0.7 0.1 96.6
Instance CPU
%Total CPU %Busy CPU %DB time waiting for CPU (Resource Manager)
2.2 63.6 0.0
Memory Statistics
Begin End
Host Mem (MB): 131,072.0 131,072.0
SGA use (MB): 50,971.4 50,971.4
PGA use (MB): 545.5 1,066.3
% Host Mem used for SGA+PGA: 39.30 39.70
RAC Statistics
Begin End
Number of Instances: 2 2
Global Cache Load Profile
Per Second Per Transaction
Global Cache blocks received: 3.09 7.68
Global Cache blocks served: 1.86 4.62
GCS/GES messages received: 78.64 195.27
GCS/GES messages sent: 53.82 133.65
DBWR Fusion writes: 0.52 1.30
Estd Interconnect traffic (KB) 65.50
Global Cache Efficiency Percentages (Target local+remote 100%)
Buffer access - local cache %: 99.65
Buffer access - remote cache %: 0.02
Buffer access - disk %: 0.34
Global Cache and Enqueue Services - Workload Characteristics
Avg global enqueue get time (ms): 0.0
Avg global cache cr block receive time (ms): 1.7
Avg global cache current block receive time (ms): 1.0
Avg global cache cr block build time (ms): 0.0
Avg global cache cr block send time (ms): 0.0
Global cache log flushes for cr blocks served %: 1.4
Avg global cache cr block flush time (ms): 0.9
Avg global cache current block pin time (ms): 0.0
Avg global cache current block send time (ms): 0.0
Global cache log flushes for current blocks served %: 0.1
Avg global cache current block flush time (ms): 0.0
Global Cache and Enqueue Services - Messaging Statistics
Avg message sent queue time (ms): 0.0
Avg message sent queue time on ksxp (ms): 0.4
Avg message received queue time (ms): 0.5
Avg GCS message process time (ms): 0.0
Avg GES message process time (ms): 0.0
% of direct sent messages: 79.13
% of indirect sent messages: 17.10
% of flow controlled messages: 3.77
Cluster Interconnect
Begin End
Interface IP Address Pub Source IP Pub Src
en9 10.51.10.61 N Oracle Cluster Repository
Main Report
* Report Summary
* Wait Events Statistics
* SQL Statistics
* Instance Activity Statistics
* IO Stats
* Buffer Pool Statistics
* Advisory Statistics
* Wait Statistics
* Undo Statistics
* Latch Statistics
* Segment Statistics
* Dictionary Cache Statistics
* Library Cache Statistics
* Memory Statistics
* Streams Statistics
* Resource Limit Statistics
* Shared Server Statistics
* init.ora Parameters
More RAC Statistics
* RAC Report Summary
* Global Messaging Statistics
* Global CR Served Stats
* Global CURRENT Served Stats
* Global Cache Transfer Stats
* Interconnect Stats
* Dynamic Remastering Statistics
Back to Top
Statistic Name Time (s) % of DB Time
sql execute elapsed time 1,925.20 94.38
DB CPU 1,789.38 87.72
connection management call elapsed time 99.65 4.89
PL/SQL execution elapsed time 89.81 4.40
parse time elapsed 46.32 2.27
hard parse elapsed time 25.01 1.23
Java execution elapsed time 21.24 1.04
PL/SQL compilation elapsed time 11.92 0.58
failed parse elapsed time 9.37 0.46
hard parse (sharing criteria) elapsed time 8.71 0.43
sequence load elapsed time 0.06 0.00
repeated bind elapsed time 0.02 0.00
hard parse (bind mismatch) elapsed time 0.01 0.00
DB time 2,039.77
background elapsed time 122.00
background cpu time 113.42
Statistic Value End Value
NUM_LCPUS 0
NUM_VCPUS 0
AVG_BUSY_TIME 12,339
AVG_IDLE_TIME 348,838
AVG_IOWAIT_TIME 221
AVG_SYS_TIME 2,274
AVG_USER_TIME 9,944
BUSY_TIME 299,090
IDLE_TIME 8,375,051
IOWAIT_TIME 6,820
SYS_TIME 57,512
USER_TIME 241,578
LOAD 1 2
OS_CPU_WAIT_TIME 312,200
PHYSICAL_MEMORY_BYTES 137,438,953,472
NUM_CPUS 24
NUM_CPU_CORES 12
GLOBAL_RECEIVE_SIZE_MAX 1,310,720
GLOBAL_SEND_SIZE_MAX 1,310,720
TCP_RECEIVE_SIZE_DEFAULT 16,384
TCP_RECEIVE_SIZE_MAX 9,223,372,036,854,775,807
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 9,223,372,036,854,775,807
TCP_SEND_SIZE_MIN 4,096
Back to Wait Events Statistics
Back to Top
Operating System Statistics - Detail
Snap Time Load %busy %user %sys %idle %iowait
27-Nov 16:00:06 0.58
27-Nov 17:00:17 1.50 3.45 2.79 0.66 96.55 0.08
Back to Wait Events Statistics
Back to Top
Foreground Wait Class
* s - second, ms - millisecond - 1000th of a second
* ordered by wait time desc, waits desc
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
* Captured Time accounts for 95.7% of Total DB time 2,039.77 (s)
* Total FG Wait Time: 163.14 (s) DB CPU time: 1,789.38 (s)
Wait Class Waits %Time -outs Total Wait Time (s) Avg wait (ms) %DB time
DB CPU 1,789 87.72
User I/O 61,229 0 92 1 4.49
Other 102,743 40 31 0 1.50
Concurrency 3,169 10 24 7 1.16
Cluster 58,920 0 11 0 0.52
System I/O 45,407 0 6 0 0.29
Configuration 107 7 1 5 0.03
Commit 383 0 0 1 0.01
Network 15,275 0 0 0 0.00
Application 52 8 0 0 0.00
Back to Wait Events Statistics
Back to Top
Foreground Wait Events
* s - second, ms - millisecond - 1000th of a second
* Only events with Total Wait Time (s) >= .001 are shown
* ordered by wait time desc, waits desc (idle events last)
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % DB time
db file sequential read 27,531 0 50 2 18.93 2.45
db file scattered read 26,322 0 30 1 18.10 1.47
row cache lock 1,798 0 20 11 1.24 0.96
OJVM: Generic 36 42 15 421 0.02 0.74
db file parallel read 394 0 7 19 0.27 0.36
control file sequential read 22,248 0 6 0 15.30 0.28
reliable message 4,439 0 4 1 3.05 0.18
gc current grant busy 7,597 0 3 0 5.22 0.16
PX Deq: Slave Session Stats 2,661 0 3 1 1.83 0.16
DFS lock handle 3,208 0 3 1 2.21 0.16
direct path write temp 4,842 0 3 1 3.33 0.15
library cache load lock 39 0 3 72 0.03 0.14
gc cr multi block request 37,008 0 3 0 25.45 0.14
IPC send completion sync 5,451 0 2 0 3.75 0.10
gc cr block 2-way 4,669 0 2 0 3.21 0.09
enq: PS - contention 3,183 33 1 0 2.19 0.06
gc cr grant 2-way 5,151 0 1 0 3.54 0.06
direct path read temp 1,722 0 1 1 1.18 0.05
gc current block 2-way 1,807 0 1 0 1.24 0.03
os thread startup 6 0 1 108 0.00 0.03
name-service call wait 12 0 1 47 0.01 0.03
PX Deq: Signal ACK RSG 2,046 50 0 0 1.41 0.02
log file switch completion 3 0 0 149 0.00 0.02
rdbms ipc reply 3,610 0 0 0 2.48 0.02
gc current grant 2-way 1,432 0 0 0 0.98 0.02
library cache pin 903 32 0 0 0.62 0.02
PX Deq: reap credit 35,815 100 0 0 24.63 0.01
log file sync 383 0 0 1 0.26 0.01
Disk file operations I/O 405 0 0 0 0.28 0.01
library cache lock 418 3 0 0 0.29 0.01
kfk: async disk IO 23,159 0 0 0 15.93 0.01
gc current block busy 4 0 0 35 0.00 0.01
gc current multi block request 1,206 0 0 0 0.83 0.01
ges message buffer allocation 38,526 0 0 0 26.50 0.00
enq: FB - contention 131 0 0 0 0.09 0.00
undo segment extension 8 100 0 6 0.01 0.00
CSS initialization 8 0 0 6 0.01 0.00
SQL*Net message to client 14,600 0 0 0 10.04 0.00
enq: HW - contention 96 0 0 0 0.07 0.00
CSS operation: action 8 0 0 4 0.01 0.00
gc cr block busy 33 0 0 1 0.02 0.00
latch free 30 0 0 1 0.02 0.00
enq: TM - contention 49 6 0 0 0.03 0.00
enq: JQ - contention 19 100 0 1 0.01 0.00
SQL*Net more data to client 666 0 0 0 0.46 0.00
asynch descriptor resize 3,179 100 0 0 2.19 0.00
latch: shared pool 3 0 0 3 0.00 0.00
CSS operation: query 24 0 0 0 0.02 0.00
PX Deq: Signal ACK EXT 72 0 0 0 0.05 0.00
KJC: Wait for msg sends to complete 269 0 0 0 0.19 0.00
latch: object queue header operation 4 0 0 1 0.00 0.00
gc cr block congested 5 0 0 0 0.00 0.00
utl_file I/O 11 0 0 0 0.01 0.00
enq: TO - contention 3 33 0 0 0.00 0.00
SQL*Net message from client 14,600 0 219,478 15033 10.04
jobq slave wait 7,726 100 3,856 499 5.31
PX Deq: Execution Msg 10,556 19 50 5 7.26
PX Deq: Execute Reply 2,946 31 27 9 2.03
PX Deq: Parse Reply 3,157 35 3 1 2.17
PX Deq: Join ACK 2,976 28 2 1 2.05
PX Deq Credit: send blkd 7 14 0 4 0.00
Back to Wait Events Statistics
Back to Top
Background Wait Events
* ordered by wait time desc, waits desc (idle events last)
* Only events with Total Wait Time (s) >= .001 are shown
* %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Event Waits %Time -outs Total Wait Time (s) Avg wait (ms) Waits /txn % bg time
os thread startup 140 0 13 90 0.10 10.35
db file parallel write 8,233 0 6 1 5.66 5.08
log file parallel write 3,906 0 6 1 2.69 4.62
log file sequential read 350 0 5 16 0.24 4.49
control file sequential read 13,737 0 5 0 9.45 3.72
DFS lock handle 2,990 27 2 1 2.06 1.43
db file sequential read 921 0 2 2 0.63 1.39
SQL*Net break/reset to client 18 0 1 81 0.01 1.19
control file parallel write 2,455 0 1 1 1.69 1.12
ges lms sync during dynamic remastering and reconfig 24 100 1 50 0.02 0.98
library cache load lock 35 0 1 24 0.02 0.68
ASM file metadata operation 3,483 0 1 0 2.40 0.65
enq: CO - master slave det 1,203 100 1 0 0.83 0.46
kjbdrmcvtq lmon drm quiesce: ping completion 9 0 1 62 0.01 0.46
enq: WF - contention 11 0 0 35 0.01 0.31
CGS wait for IPC msg 32,702 100 0 0 22.49 0.19
gc object scan 28,788 100 0 0 19.80 0.15
row cache lock 535 0 0 0 0.37 0.14
library cache pin 370 55 0 0 0.25 0.12
ksxr poll remote instances 19,119 100 0 0 13.15 0.11
name-service call wait 6 0 0 19 0.00 0.10
gc current block 2-way 304 0 0 0 0.21 0.09
gc cr block 2-way 267 0 0 0 0.18 0.08
gc cr grant 2-way 355 0 0 0 0.24 0.08
ges LMON to get to FTDONE 3 100 0 24 0.00 0.06
enq: CF - contention 145 76 0 0 0.10 0.05
PX Deq: reap credit 8,842 100 0 0 6.08 0.05
reliable message 126 0 0 0 0.09 0.05
db file scattered read 19 0 0 3 0.01 0.05
library cache lock 162 1 0 0 0.11 0.04
latch: shared pool 2 0 0 27 0.00 0.04
Disk file operations I/O 504 0 0 0 0.35 0.04
gc current grant busy 148 0 0 0 0.10 0.04
gcs log flush sync 84 0 0 1 0.06 0.04
ges message buffer allocation 24,934 0 0 0 17.15 0.02
enq: CR - block range reuse ckpt 83 0 0 0 0.06 0.02
latch free 22 0 0 1 0.02 0.02
CSS operation: action 13 0 0 2 0.01 0.02
CSS initialization 4 0 0 6 0.00 0.02
direct path read 1 0 0 21 0.00 0.02
rdbms ipc reply 153 0 0 0 0.11 0.01
db file parallel read 2 0 0 8 0.00 0.01
direct path write 5 0 0 3 0.00 0.01
gc current multi block request 49 0 0 0 0.03 0.01
gc current block busy 5 0 0 2 0.00 0.01
enq: PS - contention 24 50 0 0 0.02 0.01
gc cr multi block request 54 0 0 0 0.04 0.01
ges generic event 1 100 0 10 0.00 0.01
gc current grant 2-way 35 0 0 0 0.02 0.01
kfk: async disk IO 183 0 0 0 0.13 0.01
Log archive I/O 3 0 0 2 0.00 0.01
gc buffer busy acquire 2 0 0 3 0.00 0.00
LGWR wait for redo copy 123 0 0 0 0.08 0.00
IPC send completion sync 18 0 0 0 0.01 0.00
enq: TA - contention 11 0 0 0 0.01 0.00
read by other session 2 0 0 2 0.00 0.00
enq: TM - contention 9 89 0 0 0.01 0.00
latch: ges resource hash list 135 0 0 0 0.09 0.00
PX Deq: Slave Session Stats 12 0 0 0 0.01 0.00
KJC: Wait for msg sends to complete 89 0 0 0 0.06 0.00
enq: TD - KTF dump entries 8 0 0 0 0.01 0.00
enq: US - contention 7 0 0 0 0.00 0.00
CSS operation: query 12 0 0 0 0.01 0.00
enq: TK - Auto Task Serialization 6 100 0 0 0.00 0.00
PX Deq: Signal ACK RSG 24 50 0 0 0.02 0.00
log file single write 6 0 0 0 0.00 0.00
enq: WL - contention 2 100 0 1 0.00 0.00
ADR block file read 13 0 0 0 0.01 0.00
ADR block file write 5 0 0 0 0.00 0.00
latch: object queue header operation 1 0 0 1 0.00 0.00
gc cr block busy 1 0 0 1 0.00 0.00
rdbms ipc message 103,276 67 126,259 1223 71.03
PX Idle Wait 6,467 67 12,719 1967 4.45
wait for unread message on broadcast channel 7,240 100 7,221 997 4.98
gcs remote message 218,809 84 7,213 33 150.49
DIAG idle wait 203,228 95 7,185 35 139.77
shared server idle wait 121 100 3,630 30000 0.08
ASM background timer 3,343 0 3,611 1080 2.30
Space Manager: slave idle wait 723 100 3,610 4993 0.50
heartbeat monitor sleep 722 100 3,610 5000 0.50
ges remote message 73,089 52 3,609 49 50.27
dispatcher timer 66 88 3,608 54660 0.05
pmon timer 1,474 82 3,607 2447 1.01
PING 1,487 19 3,607 2426 1.02
Streams AQ: qmn slave idle wait 125 0 3,594 28754 0.09
Streams AQ: qmn coordinator idle wait 250 50 3,594 14377 0.17
smon timer 18 50 3,505 194740 0.01
JOX Jit Process Sleep 73 100 976 13370 0.05
class slave wait 56 0 605 10806 0.04
KSV master wait 2,215 98 1 0 1.52
SQL*Net message from client 109 0 0 2 0.07
PX Deq: Parse Reply 27 44 0 1 0.02
PX Deq: Join ACK 30 40 0 1 0.02
PX Deq: Execute Reply 20 30 0 0 0.01
Streams AQ: RAC qmn coordinator idle wait 259 100 0 0 0.18
Back to Wait Events Statistics
Back to Top
Wait Event Histogram
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
* % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
* Ordered by Event (idle events last)
% of Waits
Event Total Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
ADR block file read 13 100.0
ADR block file write 5 100.0
ADR file lock 6 100.0
ARCH wait for archivelog lock 3 100.0
ASM file metadata operation 3483 99.6 .1 .1 .2
CGS wait for IPC msg 32.7K 100.0
CSS initialization 12 50.0 50.0
CSS operation: action 21 28.6 9.5 61.9
CSS operation: query 36 86.1 5.6 8.3
DFS lock handle 6198 98.6 1.2 .1 .1
Disk file operations I/O 909 95.7 3.6 .7
IPC send completion sync 5469 99.9 .1 .0 .0
KJC: Wait for msg sends to complete 313 100.0
LGWR wait for redo copy 122 100.0
Log archive I/O 3 66.7 33.3
OJVM: Generic 36 55.6 44.4
PX Deq: Signal ACK EXT 72 98.6 1.4
PX Deq: Signal ACK RSG 2070 99.7 .0 .1 .0 .1
PX Deq: Slave Session Stats 2673 99.7 .2 .1 .0
PX Deq: reap credit 44.7K 100.0
SQL*Net break/reset to client 20 95.0 5.0
SQL*Net message to client 14.7K 100.0
SQL*Net more data from client 32 100.0
SQL*Net more data to client 689 100.0
asynch descriptor resize 3387 100.0
buffer busy waits 2 100.0
control file parallel write 2455 96.6 2.2 .6 .6 .1
control file sequential read 36K 99.4 .3 .1 .1 .1 .1 .0
db file parallel read 397 8.8 .8 5.5 12.6 17.4 46.3 8.6
db file parallel write 8233 85.4 10.3 2.3 1.4 .4 .1
db file scattered read 26.3K 79.2 1.5 8.2 10.5 .6 .1 .0
db file sequential read 28.4K 60.2 3.3 18.0 18.1 .3 .1 .0
db file single write 2 100.0
direct path read 2 50.0 50.0
direct path read temp 1722 95.8 2.8 .1 .5 .8 .1
direct path write 6 83.3 16.7
direct path write temp 4842 96.3 2.7 .5 .2 .0 .0 .2
enq: AF - task serialization 1 100.0
enq: CF - contention 145 99.3 .7
enq: CO - master slave det 1203 98.9 .8 .2
enq: CR - block range reuse ckpt 83 100.0
enq: DR - contention 2 100.0
enq: FB - contention 131 100.0
enq: HW - contention 97 100.0
enq: JQ - contention 19 89.5 10.5
enq: JS - job run lock - synchronize 3 100.0
enq: MD - contention 1 100.0
enq: MW - contention 2 100.0
enq: PS - contention 3207 99.5 .4 .1
enq: TA - contention 11 100.0
enq: TD - KTF dump entries 8 100.0
enq: TK - Auto Task Serialization 6 100.0
enq: TM - contention 58 100.0
enq: TO - contention 3 100.0
enq: TQ - DDL contention 1 100.0
enq: TS - contention 1 100.0
enq: UL - contention 1 100.0
enq: US - contention 7 100.0
enq: WF - contention 11 81.8 18.2
enq: WL - contention 2 50.0 50.0
gc buffer busy acquire 2 50.0 50.0
gc cr block 2-way 4934 99.9 .1 .0 .0
gc cr block busy 35 68.6 31.4
gc cr block congested 6 100.0
gc cr disk read 2 100.0
gc cr grant 2-way 4824 100.0 .0
gc cr grant congested 2 100.0
gc cr multi block request 37.1K 99.8 .2 .0 .0 .0 .0 .0
gc current block 2-way 2134 99.9 .0 .0
gc current block busy 7 14.3 14.3 14.3 28.6 28.6
gc current block congested 2 100.0
gc current grant 2-way 1337 99.9 .1
gc current grant busy 7123 99.2 .2 .2 .0 .0 .3 .1
gc current grant congested 2 100.0
gc current multi block request 1260 99.8 .2
gc object scan 28.8K 100.0
gcs log flush sync 65 95.4 3.1 1.5
ges LMON to get to FTDONE 3 100.0
ges generic event 1 100.0
ges inquiry response 2 100.0
ges lms sync during dynamic remastering and reconfig 24 16.7 29.2 54.2
ges message buffer allocation 63.1K 100.0
kfk: async disk IO 23.3K 100.0 .0 .0
kjbdrmcvtq lmon drm quiesce: ping completion 9 11.1 88.9
ksxr poll remote instances 19.1K 100.0
latch free 52 59.6 40.4
latch: call allocation 2 100.0
latch: gc element 1 100.0
latch: gcs resource hash 1 100.0
latch: ges resource hash list 135 100.0
latch: object queue header operation 5 40.0 40.0 20.0
latch: shared pool 5 40.0 20.0 20.0 20.0
library cache load lock 74 9.5 5.4 8.1 17.6 10.8 13.5 35.1
library cache lock 493 99.2 .4 .4
library cache pin 1186 98.4 .3 1.2 .1
library cache: mutex X 6 100.0
log file parallel write 3897 72.9 1.5 17.1 7.5 .6 .3 .1
log file sequential read 350 4.6 3.1 59.4 30.0 2.9
log file single write 6 100.0
log file switch completion 3 33.3 66.7
log file sync 385 90.4 3.6 4.7 .8 .5
name-service call wait 18 5.6 5.6 5.6 16.7 44.4 22.2
os thread startup 146 100.0
rdbms ipc reply 3763 99.7 .3
read by other session 2 50.0 50.0
reliable message 4565 99.7 .2 .0 .0 .1
row cache lock 2334 99.3 .2 .1 .1 .3
undo segment extension 8 50.0 37.5 12.5
utl_file I/O 11 100.0
ASM background timer 3343 57.0 .3 .1 .1 .1 21.1 21.4
DIAG idle wait 203.2K 3.4 .2 .4 18.0 41.4 14.8 21.8
JOX Jit Process Sleep 73 2.7 97.3
KSV master wait 2213 99.4 .1 .2 .3
PING 1487 81.0 19.0
PX Deq Credit: send blkd 7 57.1 14.3 14.3 14.3
PX Deq: Execute Reply 2966 59.8 .8 9.5 5.6 10.2 2.6 11.4
PX Deq: Execution Msg 10.6K 72.4 12.1 2.6 2.5 .1 5.6 4.6 .0
PX Deq: Join ACK 3006 77.9 22.1 .1
PX Deq: Parse Reply 3184 67.1 31.1 1.6 .2
PX Idle Wait 6466 .2 8.7 4.3 4.8 .3 .1 5.0 76.6
SQL*Net message from client 14.7K 72.4 2.8 .8 .5 .9 .4 2.8 19.3
Space Manager: slave idle wait 722 100.0
Streams AQ: RAC qmn coordinator idle wait 259 100.0
Streams AQ: qmn coordinator idle wait 250 50.0 50.0
Streams AQ: qmn slave idle wait 125 100.0
class slave wait 55 67.3 7.3 1.8 5.5 1.8 7.3 9.1
dispatcher timer 66 6.1 93.9
gcs remote message 218.6K 7.7 1.8 1.2 1.6 1.7 15.7 70.3
ges remote message 72.9K 29.7 5.1 2.7 2.2 1.5 4.0 54.7
heartbeat monitor sleep 722 100.0
jobq slave wait 7725 .1 .0 99.9
pmon timer 1474 18.4 81.6
rdbms ipc message 103.3K 20.7 2.7 1.5 1.3 .9 .7 40.7 31.6
shared server idle wait 121 100.0
smon timer 18 100.0
wait for unread message on broadcast channel 7238 .3 99.7
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (64 msec to 2 sec)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: ms is milliseconds s is 1024 milliseconds (approximately 1 second)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 64ms to 2s <32ms <64ms <1/8s <1/4s <1/2s <1s <2s >=2s
ASM file metadata operation 6 99.8 .1 .1
DFS lock handle 6 99.9 .1 .0
OJVM: Generic 16 55.6 2.8 41.7
PX Deq: Signal ACK RSG 3 99.9 .0 .1
PX Deq: Slave Session Stats 3 99.9 .0 .0 .0
SQL*Net break/reset to client 1 95.0 5.0
control file sequential read 1 100.0 .0
db file parallel read 34 91.4 8.6
db file scattered read 4 100.0 .0 .0
db file sequential read 6 100.0 .0 .0 .0
direct path write temp 11 99.8 .1 .1 .0
enq: WF - contention 2 81.8 18.2
gc cr block 2-way 1 100.0 .0
gc cr multi block request 1 100.0 .0
gc current block 2-way 1 100.0 .0
gc current block busy 2 71.4 28.6
gc current grant busy 8 99.9 .0 .1
ges lms sync during dynamic remastering and reconfig 13 45.8 20.8 33.3
kjbdrmcvtq lmon drm quiesce: ping completion 8 11.1 11.1 77.8
latch: shared pool 1 80.0 20.0
library cache load lock 26 64.9 14.9 12.2 4.1 4.1
log file parallel write 2 99.9 .0 .0
log file sequential read 10 97.1 2.0 .6 .3
log file switch completion 2 33.3 66.7
name-service call wait 4 77.8 22.2
os thread startup 146 100.0
reliable message 4 99.9 .0 .1
row cache lock 2 99.7 .0 .0 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 sec to 2 min)
* Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
* Units for % of Total Waits: s is 1024 milliseconds (approximately 1 second) m is 64*1024 milliseconds (approximately 67 seconds or 1.1 minutes)
* % of Total Waits: total waits for all wait classes, including Idle
* % of Total Waits: value of .0 indicates value was <.05%; value of null is truly 0
* Ordered by Event (only non-idle events are displayed)
% of Total Waits
Event Waits 4s to 2m <2s <4s <8s <16s <32s < 1m < 2m >=2m
row cache lock 6 99.7 .3
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 min to 1 hr)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Service Statistics
* ordered by DB Time
Service Name DB Time (s) DB CPU (s) Physical Reads (K) Logical Reads (K)
ubshost 1,934 1,744 445 73,633
SYS$USERS 105 45 1 404
SYS$BACKGROUND 0 0 1 128
ubshostXDB 0 0 0 0
Back to Wait Events Statistics
Back to Top
Service Wait Class Stats
* Wait Class info for services in the Service Statistics section.
* Total Waits and Time Waited displayed for the following wait classes: User I/O, Concurrency, Administrative, Network
* Time Waited (Wt Time) in seconds
Service Name User I/O Total Wts User I/O Wt Time Concurcy Total Wts Concurcy Wt Time Admin Total Wts Admin Wt Time Network Total Wts Network Wt Time
ubshost 60232 90 2644 4 0 0 13302 0
SYS$USERS 997 2 525 19 0 0 1973 0
SYS$BACKGROUND 1456 2 1258 14 0 0 0 0
I am not able to paste the whole awr report. I have paste some of the sections of awr report.
Please help.
Thanks and Regards, -
How to set the router and play the Command & Conquer using direct IP mode?
My router is WRT54GFirmware Version: v3.03.1
How to set the router and play the Command & Conquer using direct IP mode with other computer?Hi, when you say direct IP mode, what do you mean ? do you wanna play the game online or on the LAN ??
can you give a few more details. -
How can I make the status bar hide automatically when using safari?
How can I make the status bar hide automatically when using safari?
When Safari is in FullScreen mode, menu bar will be hidden.
Safari window to fit the screen?
Move the mouse pointer to the bottom right corner of the Safari window.
Double arrows will appear. Drag it to resize the window to fit the screen. -
The title pretty much says it all. But if you don't understand, here is an example of what I want to happen:
When a USB drive is inserted onto my Mac, an application on it will open.
How can I make this happen?I haven't tried it, but perhaps a Watched folder on the external drive & an Applescript?
http://www.mactech.com/articles/mactech/Vol.20/20.07/FolderWatching/index.html
Or perhaps just an Applescript to check for exist :USB Drive Name, then run application? -
Sharing an Attached USB drive on Network
I have an intel Mac Mini on a network. I would like other machines in the same subnet to see the Mini Pal USB drive I have attached to it. All I have managed to access from the other PCs is the main drive via the home folder.
This is trivially easy to do this on my XP machine. Am I just dense or is it not possible on the Mac?
Thanks for any guidance you can lend.
- Dave -I hate mysteries, so sooner or later I'd like to find out how to set those attributes "manually".
Sharepoints is a GUI and you can see how it manipulates the netinfo database when adding new sharepoints.
You can also see what it writes to the windows sharing config file /etc/smb.conf
This will give you an understanding of how to this manually. However it is by far easier just to use sharepoints. Or if you invest in professional server software you can use the workgroup manager.
BTW could you mark this thread as solved as it helps other users who search the forum find specific answers. Thanks. -
"Drive not properly ejected"--How do I keep a USB drive mounted constantly?
I have a 2-month-old iMac, and have had a USB external SATA-enclosure 2.5" 500gb drive attached the whole time. About a week ago, it started randomly giving the "Drive not properly ejected" message and usually it remounts after a few seconds. Sometimes it doesn't and I have to unplug it and plug it back in.
I thought the drive was at fault, so I switched it with a similar drive that was connected to my AirPort Extreme base station. The problem stayed with the Mac. Also I imagined that (somehow) the iMac wasn't supplying enough power, so I bought a powered USB hub. The result is the same.
I don't understand how it can work for two months and then suddenly get this problem. The only change along the line is that about a week ago I did a software update ("About this Mac" says it is 10.6.7). The latest update DOES coincide with the appearance of this problem.
How do I resolve this?
(Notes: There at least one other thread here where people seem to think that this is a Time Machine problem. I think this is because many people connect large external drives for the purpose of backup. I upgraded to iMac from Mac Mini. I installed Snow Leopard right after I bought the iMac and then tried to restore from my Time Machine backup. Something went wrong, so I mirrored my Mac Mini drive onto a 500gb SATA 2.5", put it in a FireWire enclosure and boot from that. I use the iMac's internal 1T drive for Time Machine. That may sound like "lazy man solution", but it could have a great advantage someday where I could plug that FireWire drive into my Mac Mini and not have any downtime should iMac need to be repaired. The random disconnecting of the USB drive doesn't coincide with any Time Machine events. TM is working fine.)Kappy,
Thank you for your help with this problem!
Your hypothesis for the drive/enclosure being a problem is good thinking, however:
-The problem never existed for the first two months I had the iMac.
-I can switch similar drives with iMac and AirPort Extreme, and the problem stays with the iMac.
-It has nothing to do with Time Machine as I am using a FireWire drive to boot, and the iMac internal 1TB for Time Machine.
-A friend suggested a cable problem, but I have tried many combinations and it wouldn't explain why suddenly after 2 months three sets of USB cables can fail at the same time (at least one, I used for 3 years with Mac Mini.)
I now have a 111gb drive connected to my AirPort Extreme and it has been copying files to my FireWire drive slowly but surely for two hours now. The same drive disconnected after 13 minutes on the iMac. All indications are pointing to OSX 10.6.7. The perfect test (for anyone with convenient resources) would be to install Snow Leopard from disc on a clean Mac and not upgrade it, plug in a USB drive and see if it can last a day or two. Then, upgrade to 10.6.7 and see what happens. I hope someone can try this.
(Is this a ploy to try to sell more FireWire equipment? I hope not.)
Maybe you are looking for
-
When I copy the entire unmodified contents of an SD card containing AVCHD files to my external HDD I can't open the AVCHD movie file using Mountain Lion and Quicktime. The open clip window opens and just stays blank. Meanwhile in the background I se
-
App Store problem??
On both my iPad 3 and iPhone 5 the App Store is showing updates are available, yet when I go into the store nothing is showing up. I've tried restarting both devices and same thing. No connection issues, is there an issue with the App Store?
-
I just went from OS 10.6 to 10.8. The arrow button is gone from the scrollbar. I do not see the option in "Systems Preference" any more. Am I missing something. If it is gone, is Apple going to bring it back?
-
Premiere Pro CS3 Glitch - Track Matte
I found a glitch this morning in Premiere Pro CS3. I have a nested sequence on my main timeline. On that sequence I have a track matte effect and above the nested sequence video layer is my "mask" layer. When previewing this sequence through Premiere
-
Hi I have a friend that wants to buy the ipad, however he wants to know if you can use MS Word in ipad?