How to set ApplIndentityData header field in JMS adapter

Hi Guys ,
I have one requirement for update the field in SAP JMS header. I am using transport protocol for IBM Websphere MQ in JMS adapter.
While sending data to IBM Websphere MQ Queue via JMS Adapter, need to set the field called ApplIndentityData with the appropriate value which is populate to a MQHRF2 header of a message.
So, regarding that where will do it? Means JMS receiver adapter or IBM MQ level. If JMS receiver adapter, I think using ASMA, So please guide me how to set this filed value in JMS adapter or share any document you have.
Thanks & regards
Vijaykumar S

Hi RejaSekar,
       I reffered your blog and did the below settings in JMS module and ASMA settings.
1) Changed the mode for u201CJMS-Complaintu201D instead of u201CWebsphere MQ(non JMS)u201D
2) Additional JMS message properties tab created below property name and java type.
       LocalName    --> String
       Partname      --> String
3) In module parameter tab added the below module name and key
    AF_Modules/DynamicConfigurationBean   --> LocalEnterpriseBean --> RFH2HEADER
4) Under parameter Tab
     RFH2HEADER       -->   key.0      -->     insert http://sap.com/XI/System/JMS DCJMSMessageProperty0
     RFH2HEADER       -->   key.1      -->     insert http://sap.com/XI/System/JMS DCJMSMessageProperty0
     RFH2HEADER      --> value.0    -->    LocalName
     RFH2HEADER      --> value.1    -->    PartnerName
Kindly check the above settings whether this is correct or wrong. If anything wrong please let me know what we need to change JMS receiver adapter.
Actually my requirement is need to set these parameters and set the value to that parameters and pass in to /usr folder of a WebsphereMQ message.
Kindly check and help me out.
Thanks & regards
Vijayakumar S

Similar Messages

How to set HTTP header field "cookie" with http receiver adapter?

Hi,
I am using http receiver adapter (not axis) in a scenario. I could not set a parameter with key cookie in http header. Is there some kind of restriction to set it? I am able to set others like connection and create custom fields using ASMA and dynamic key configuration via UDF on mapping.
Could you please comment on, is cookie http parameter special or noneditable by PI's http adapter? I am looking for a solution without editing any abap code...
Regards,

I believe it is possible since axis adapter provides very same functionality. Let me summarize my scenario may be it helps:
I am trying to call series of webservice lets say in a BPM. First service (login service) will provide me with a session id (in http header with key Set-Cookie) then I will call another service which has that session id in its http header with key cookie then I am going to logout. So I am testing the second part now, but it doest let me send cookie http header parameter.
I hope I clarified a bit more my problem.
Regards,

How to set the header variables in weblogic

Hi,
We have a following set up in our environment.
We have weblogic and on the top of it we have apex listener deployed which redirects Oracle Apex.
My Issue:
How can we set up the header variables in weblogic once the user is authenticated against weblogic server.
We are struck here, not knowing how to set the header variables in weblogic server. Its fairly straight forward for Oracle Access Manager or others..
Thanks
Ramesh P.

maybe you are looking for the routing options
http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1125348

How to set Mandatory Choice field while Creating Custom Task using Sharepoint Designer 2007

Hi,
I am new to Sharepoint development.I dont know whether i am posting the question in Correct place.Kindly redirect me to the correct place if i am posting it in wrong place.
I created a custom task in Sharepoint Designer 2007 using
Collect Data from User
Action.
I created a field in the task form which is of choice type and
unchecked allow blank values
because i wanted that field to be a mandatory field.When i handled that task ,i was able to complete that task
without selecting that mandatory field.But, I was expecting not to allow me to complete the task without selecting that field. Kindly tell me how to set the choice field as mandatory.

Hi,
You are using SharePoint Designer 2007, so I moved the thread to the appropriate forum for MOSS 2007.
This is by design that
Workflow-generated form (for action Collect data from User) does not perform validation properly on drop-down choices, the workaround is to use JavaScript to perform the field validation.
This thread has the JavaScript code can help you:
http://social.msdn.microsoft.com/forums/en-US/sharepointworkflow/thread/0ad7fc3c-97a1-464e-ae89-c3133462dda8/
Xue-Mei Chang

How to set different header for different Standard report page

How to set different header for different Standard report page

Hi,
A easy answer would be use the 'set report header text.vi' but maybe you are talking about something else ?

How to set the data fields column wide at sqlplus

Dear Sir/Madam
I would like to know how to set the data fields column wide at sqlplus
Thanks
Francis

see
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch6.htm#sthref1131
and the FORMAT clause of the COLUMN command in
http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch12013.htm#BACHCABF

How to set TabbedPane header height?

How to set TabbedPane header height?

So you got help in this posting that shows one way to add a component to the tabbed pane.
[http://forums.sun.com/thread.jspa?threadID=5337065]
But you didn't acknowledge the help you received.
So now you want more help? Well since you didn't reply to that posting I won't reply to this posting.

How to Set Polling Options of a DB adapter From EnterpriseManager/AdminCons

HI All,
We all know after Dragging a DB adapeter we can manually set the polling Options in J developer
However,
My query is how to Set Polling Options of a DB adapter From EnterpriseManager/AdminCons so that we dun hav to change our code and redeploy if any change is asked for.
My DB adapter is deployed to EM.(SOA Server).
Polling Options are like:
From the Polling Frequency list, select how frequently to poll for new records or events.
In the Database Rows per XML Document field, specify the number of rows per XML document when sending events to Oracle BPEL PM or Mediator. This is the batch setting between the database adapter and its consumer: Oracle BPEL PM or Mediator.
In the Database Rows per Transaction field, select Unlimited or enter a value to indicate the number of table rows to process during a single transaction.
When polling the database for events, you can order the returned rows by the selected column by using the Order By list. The best practice is to choose <No Ordering>, as message ordering regardless is not guaranteed without extra configuration.

Hi,
Inside your composite (in the EM), you can see there is a category table call 'Services and References'.
Under it, find the name of your JCA Adapter, where you've define the polling from the DB. Click on it and go to the property tab.
There you can find all the parameters you've set and more.
After you finish update it, click on Apply (this will automatically poll the data).
Arik

HTTP Header fields in SOAP adapter - Part 2

Hi All,
With regards to my previous thread HTTP Header fields in SOAP adapter
my header issue is solved and hence I have closed the thread but still I am not able to make the connection successful. The new problem is below
My vendor requirement is to specify the header as "Ent-sender" but when we give the same in XI in communication channel it automatically convets into uppercase "ENT-SENDER". Due to case-sensitive in vendor server the connection is not gettingestablished.
Please help me out how to solve the problem.
Note: Sorry for the new thread as it was created due to new problem and also the previuos thread is already too long.
Regards,
Dhill

Hi Neaves,
Thank you, I jave seen the note and find the below solution will be some what realated to my prblem.
The nosoap mode lets the adapter send the XI payload directly without wrapping it in the SOAP envelope. Although the main use of this mode is to send some plain text content directly to some web server, one can use this mode to send their own SOAP message (e.g., with arbitrary headers) to an external web service (See related questions). In this case, the XI payload must be formatted in the SOAP envelope.
To use the nosoap mode, the channel must be configured to use no SOAP envelope.
If yes, can you please let me know how to use nosoap mode otherise let me the other possibilities. I am already using tcpg2.zip to trace the SOAP adapter in which it was confirmed that XI is changing the header automatically into CAPS whatever case we give,
Regards,
Dhill

Header Fields in HTTP Adapter

Hi,
Can anyone please explain meaning of "Header fields in HTTP adapter" ? It has "Name" and "Value" fields in the receiver HTTP channel.
If I enter values like:
Name                         Value
Source                        XYZ
Destination                  ABC
Where will these appear in outbound HTTP post ?
Also, is this different from "HTTP Header Fields" checkbox available in "Adapter specific message attributes" section ?
Thanks
Bhaven

> Also, is this different from "HTTP Header Fields" checkbox available in "Adapter specific message attributes" section ?
You use this, when you want to have dynamic header fields. You put here a key, but instead of a value you put a parameter name, which can be filled with a value during mapping runtime.
Regards
Stefan

[LENOVO Y50-70] How To Set NVIDIA Card as Default Graphic Adapter

I have just bought Lenovo Y50-70. But i wonder how to set NVIDIA Card as default Graphic Adapter instead using Intel Card. Thanks

hi monx,
Welcome to the Forums.
The Y50-70 uses Nvidia Optimus Technology to automatically switch between the Intel GPU (for power saving) and Nvida GPU (for maximum performance).
To manually set the default graphics adapter, you will need to set this inside the Nvidia Control Panel > Manage 3D Settings.
- Sample image
More info:
http://support.lenovo.com/us/en/documents/ht071337
Regards

How to set MQ message header properties using JMS adapter? (10.1.2)

Hello,
I am trying to send MQ messages from a BPEL process. We are using OAS 10.1.2 and JMS MQ adapter. Could you please let me know how to set the message descriptors like message format, type, report and reply to queue properties and queue open options (in jmsAdapterOutboundHeader).
Regards,
Geratayya

put something like this
<activationAgents>
 <activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="PARNERLINKNAME">
 <property name="clusterGroupId">SOMEUNIQUEVALUE</property>
 <property name="portType">PARTNERLINK_PORTTYPE</property>
 </activationAgent>
 </activationAgents>

How to view "From" header field in OUTgoing messages in Mail? Frustrating.

In Mail v.4.3 (in OSX 10.6.4), I need to view the "From" field in my outgoing messages as I am composing them. However, there seems to be no setting in Mail which allow this.
I find this very frustrating because in Eudora (which I used to use), the "From" field in outgoing messages is visible by default. But in Mail, not only is it not visible by default, there seems to be no way to make it visible.
In the "Customize..." button to the left of the Subject field in outgoing messages, one has the option to add as default outgoing message fields "cc," "bcc," "Reply-To," and "Subject," but none of those are what I want. It allows one to also view the address of the mail server, but that also is not what I'm looking for. What I want is to see my outgoing +email address+. And nowhere is there an option in the Preferences to turn this on. (At least as far as I could tell.)
In fact, the only way to see the identity in the outgoing "From" field is to go to Preferences, then click on Accounts, and look there; or send oneself a test email. Both of which are a hassle and should be unnecessary.
In case you're curious as to why I want to see my outgoing "From" header field:
I have several different "personas" online, each of which uses a different email address: My work address (with a work-related domain); my family/personal address (with a different email address than my work address); an online avatar I use in various gaming sites (also with its own address, since I don't want to use my personal name/address in the gaming community); and so on. However, I have all incoming emails to all accounts auto-forwarded to the same central email account. Most of the time I'm just replying to business emails, so my outgoing "Full Name" and "Email Address" (in Preferences>Accounts) are generally set to my business name and address; but on occasion when I want to reply to a non-business email and not have the recipient see my business email address, I go in to Preferences>Accounts and change "Full Name" and "Email Address" (i.e. what is displayed to the user) to something different. And when I'm done with that, I change it back to my business address.
However, sometimes I forget if I've changed it back or not, or forget what I've changed it to. In Eudora, All one needed to one was create a new outgoing email and it would display the "From" field so I could instantly see my outgoing identity. But in Mail, there is no "From" field in outgoing emails, so I'm constantly nervous and wondering which outgoing identity I may have changed to and accidentally forgotten to change back from.
(Yes, yes, I know that if a recipient wanted to be snoopy, they could look at the "full headers" of any incoming email and see the name of my email server, which may different from my displayed email address; but we're not talking about spy-stuff here, I'm just trying to not confuse people and keep business separate from personal.)
So: is there any way for me to see the outgoing "From" field in the emails I send? Or am I condemned to constantly (and mostly unnecessarily) checking "Preferences>Accounts" to see what I have enetered there?

Thanks for replying.
What is the "compose window" to which you are both referring? I could find no reference to such a thing in the Mail menus or Help.
Do you mean the "Composing" pane in the Preferences? I don't see what either one of you is referring to there, but I did notice there something that could function as an awkward workaround: If I click on the "Automatically CC myself" box in Preferences>Composing, then when I start a new email, my email address is displayed in the "CC" field -- and luckily, Mail allows me to then delete my email address out of the CC field, so I don't have to spam myself with duplicate copies of all my emails. This way, I can at least briefly see what email address I'm using, before I delete it from the CC field. Pretty awkward and unnecessarily laborious, however -- still not a perfect solution.
Or, by "composing window," are you referring to an outgoing email? As I said in my original comment, I do see what Ernie called "a small box with lines and an arrow at the bottom left of the header box." This is what I had to say about it:
+"In the "Customize..." button to the left of the Subject field in outgoing messages, one has the option to add as default outgoing message fields "cc," "bcc," "Reply-To," and "Subject," but none of those are what I want. It allows one to also view the address of the mail server, but that also is not what I'm looking for. What I want is to see my outgoing email address. And nowhere is there an option in the Preferences to turn this on. (At least as far as I could tell.)"+
In other words, when Ernie says, "click the box beside From," I can't do that -- because there is no such option. That's the whole problem in the first place. If there was a "From" field beside which I could click a box to make it appear, I would have done so! But there is no "From" field in the "Customize" section of the "small box with lines and an arrow at the bottom left of the header box."
I find it completely mystifying that both of you seem to be able to see a "From" field available to be added to the header of outgoing emails, yet no such option is available to me in Mail. What possibly could be causing this? 10.6.4 is freshly installed on my machine, and Mail seems brand new and uncorrupted. And I'm using Mail 4.3, the latest version.
Are you saying that everyone else can see an option to have a "From" field in their outgoing messages, but I uniquely don't? Very very very strange.

HOW TO SET A RAW FIELD

Hi,
I'd like to know how I can set a RAW field with the correspondent '10' value (for '10' i mean the byte value of '00000101').
Is there a manner to do this at low level, without cast ?
Thanks and best regards,
Neil

The string 00000101 generally represents the binary value of 5 so I am unsure of exactly what you want but maybe the following will help:
UT1 > set echo on
UT1 > col dumped format a30
UT1 > drop table example;
Table dropped.
UT1 > create table example (fld1 varchar2(10), fld2 raw(02));
Table created.
UT1 > insert into example values ('Row 1',hextoraw('05'));
1 row created.
UT1 > insert into example values ('Row 2',hextoraw('0A'));
1 row created.
UT1 > select fld1, fld2, dump(fld2,16) as dumped from example;
FLD1 FLD2 DUMPED
Row 1 05 Typ=23 Len=1: 5
Row 2 0A Typ=23 Len=1: a
Being that on a big endian machine the 8 bits of a byte are 0 - 7 numbered left to right and on a little endian machine the bits are 0 - 7 right to left this may be where the confusion in your post is coming from. On my system the Oracle functions appear to follow big endian set and display patterns but I suspect that the physical byte settings match. You would need to test this by dumping the raw data on the target platform. The only difference this makes is the character value you would choose to get the bit pattern you want.
The dbms_raw package provides varchar2 to raw and back conversion functions.
HTH -- Mark D Powell --

How to set a payload field value only once for multiple instances selected?

The user needs to set a payload field value and then he can approve the task so the task can continue through the process, that's fine when the user selects one instance and sets the value in the task details section and then clicks the approve button, but how do we achieve the same behavior in a multiple way?, I mean the user can select multiple tasks in the workspace (in this case the details task page is not available and instead the following label appear "Multiple tasks selected") then if the user clicks the Actions drop down -> APPROVE he only gets the message "your request was processed successfully", so how can the user modify the payload field value only once for all the selected tasks so when he clicks APPROVE the value is populated in all the instances selected.
Thanks,
Carlos.

In the action which displays the edit page just set the form idx value before displaying the jsp.

How to set ApplIndentityData header field in JMS adapter

Similar Messages

Maybe you are looking for