How to set authorization for BW Workspace in backend and Portal ?

Hello Expert,
                     I have developed one BW Workspace in development environment . I have some query regarding BW workspace authorization for access in portal . Some of the queries are as  follows:
1) How many composite provider we can build up inside of one workspace that we can go by Tcode ---RSWSPW ?
2) After activating the workspace it shows in RSWSPW ,but this workspace/composite provider will be available in Info Area(in RSA1) or some area else from where we can see this ?
3) Now our requirement is like that -- we have to provide some workspace for SD power user ,Finace Power user & Marketing Power users, in this situation how can we put authorization in bw workspace like SD power user should not see the FI Power user's & Marketing Power user's Workspace rather than his own workspace ?
4) In our requirement, we are going to produce some bex query on top of bw worksapce composite provider . For creating this query ,we searched provider by puting provider name directly in serach option , but is there any option to search the bw worksapce related composite provider by putting info area name in query search ?
5) In another senerio, we gone to create BO AA OLAP report on top of bw workspace composite provider but in source option we cant see the provider ,infact we could not search the composite provider in search option in source selection ----   do i need to navigate any step in compostie provider to make it enable for BO AA OLAP creation on top of composite provider ?
Expecting and appreciating your guidence and suggestion asap .
Thanks & Regards,
Surajit Pal

Hello Expert,
                 Do you have any idea regarding below questionaries about BW Workspace ?
1) How many composite provider we can build up inside of one workspace that we can go by Tcode ---RSWSPW ?
2) After activating the workspace it shows in RSWSPW ,but this workspace/composite provider will be available in Info Area(in RSA1) or some area else from where we can see this ?
3) Now our requirement is like that -- we have to provide some workspace for SD power user ,Finace Power user & Marketing Power users, in this situation how can we put authorization in bw workspace like SD power user should not see the FI Power user's & Marketing Power user's Workspace rather than his own workspace ?
4) In our requirement, we are going to produce some bex query on top of bw worksapce composite provider . For creating this query ,we searched provider by puting provider name directly in serach option , but is there any option to search the bw worksapce related composite provider by putting info area name in query search ?
5) In another senerio, we gone to create BO AA OLAP report on top of bw workspace composite provider but in source option we cant see the provider ,infact we could not search the composite provider in search option in source selection ----   do i need to navigate any step in compostie provider to make it enable for BO AA OLAP creation on top of composite provider .
Appreciating your early responds and thanks in advance .
Regards,
Surajit

Similar Messages

  • How to set authorization for only Create infotype record

    How can I set the authorization so that the user can only create Infotype 14,15,2010,2001,2006 but cannot change and delete the record for these infotypes.
    But user has the authorization to create,change and delete other infotypes.

    Hi irene,
    1. For this we have to use the
       authorisation object
      P_ORGIN
    2. It has got the following fields, on which authorisations can be controlled.
    AUTHC     Authorization level
    INFTY     Infotype           
    PERSA     Personnel Area     
    PERSG     Employee Group     
    PERSK     Employee Subgroup  
    SUBTY     Subtype            
    VDSK1     Organizational Key 
    regards,
    amit m.

  • How to set authorization to limint plant to craete reservation from IW32

    Please advice me how to set authorization to limit plant to create reservation from IW31 or IW32 (Maintenance Order).
    I set at M_MRES_WWA (authorization object) but it is not work.

    Hi consult.,
                      I am not very sure about the object you are using, but if it is correct(else serch for the correct object), then make a master role for the T-Codes IW31 and IW32.
    then make a drived role from the above made role, and assign the object(above searched object) in the object give the value as that of your plant, and activity as per the requirement.
    you can maintain as many derived roles as the no. of plants.
    hope it helps.
    regards,
    YK

  • I have a mac mini server which I want to set up for remote access from windows and mac pcs.  How do I do this.  I can access it form my home network OK

    I have a mac mini server which I want to set up for remote access from windows and mac pcs.  How do I do this.  I can access it form my home network OK

    Posted in error.

  • How to set View for Completed items inside Tasks?

    How to set button for 'View' and see Completed items or not completed inside Tasks?

    Hi,
    You want to set custom views for Tasks folder so that when we click a view button, it will show all Completed or incomplete tasks, am I correct?
    Which version of Outlook are you using? There are existing views for completed/incomplete tasks in Outlook. In Outlook 2010 and Outlook 2013, we can find the buttons under View tab > Change View. Click Completed button to view all completed
    tasks; Click Active button to view incomplete tasks.
    In Outlook 2007, just click View > Current View to switch between different views.
    If I've misunderstood something, please feel free to let me know.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to set  password for BPEL domain

    Hi,
    I am new to SOA.
    I want to setup client-server environment for few developers.
    I installed SOA 10.1.3.3 in the server machine.
    And I created few domains in BPEL, one for each developer.
    It didn't ask me to set the password while creation of the domain.
    Please let me know how to set password for newly created domain so that each developer login to his/her own domain and manage processes.
    Thanks!!!

    Thanks for the prompt response.
    What roles should I give to my developers to allow them to manage their services in ESB control, BPEL control, WSM control.
    And I would like to know how to set the password for a BPEL domain too.
    Message was edited by:
    user644377

  • How to set password for every application

    Hi,
    As a administrator how to set password for every weblication in sharepoint 2013.
    Is there any way to set?
    Thanks,

    Who's password are you trying to set? Please provide more details.

  • How to set password for a zip file and should be checked when reading that

    Hi friends,
    how to set password for a zip file and should be checked when reading that file???
    thanks.
    Praveen Reddy.J

    Heyy man, i think, u did not get my problem.
    all i have to do is:
    i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
    Tanks for reply.

  • How to set password for Local are connection?

    How to set password for Local are connection?

    do you mean the 802.1x authentication?
    check out links below:
    http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_9_ea1/configuration/guide/scg/Sw8021x.html
    http://technet.microsoft.com/en-us/network/bb545365.aspx
    Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    IT Stuff Quick Bytes

  • How to restrict authorization for OBC4

    Dear all
    How to restrict authorization for obc4( field status) for user id wise
    Regards
    nasa

    Hi Nasa
    You try to use the S_TABU_LIN object. With this object you can control access to tables (called from maintenance views, SM30 etc) based on the database key for the table.
    And as far as I cant see, the OBC4 transaction is just a couple of maintenance views for V_T004V andf V_T004F.
    You can find a small how-to [here|http://www.mhn-consulting.com/s_tabu_lin.html]
    Regards
    Morten Nielsen

  • How to give authorization for create and change particular Condition Type

    Hi...
       In my requirement is , Only one user can be authorized to create and change a particular condition type 'ZABC' in vk11 and vk12 .
    For remaining condition type can be used as in normal .
    How to do this ? How to give authorization for a particular user for particular condition type ?
    Plz guide me ..
    Thanks in advance .
    Deepa .

    Hi Deepa ,
    u can check A.Object V_KOND_VEA, in user profile u can assign condition type or tables.
    have a word with ur basis guy , so he can help u in better way.
    aand also ref FM SD_COND_AUTH_CHECK
    Regards
    Prabhu

  • How to set value for trim and bleed using jsx script?

    I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
    Following is the code I am trying with:
    var _saveName = new File ( root_path +_strFileName+".pdf");
        var _saveOpts = new PDFSaveOptions();
        _saveOpts.printerResolution = 300; 
        var bleedarray = new Array();
         bleedarray[0] =9.00;
         bleedarray[1]=9.00;
         bleedarray[2]=9.00;
         bleedarray[3]=9.00;    
        _saveOpts.bleedOffsetRect = bleedarray;

    I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
    var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
    Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

  • How to set sourceURL for MS Access database in other computer?

    How to set sourceURL for MS Access database in other computer?
    getConnection("jdbc:odbc://www.micrsoft.com:9999/msaccess");
    How do you determine the port for the MS Access?
    Thank you very much.

    How to set sourceURL for MS Access database in other computer?You don't.
    How do you determine the port for the MS Access?You don't.
    Databases like Oracle and MS SQL Server have 'server' software which runs on a server computer. Requests talk to that server software. MS Access does not have a server, so there is nothing to talk to.
    You either must use a DSN or create you own server. For the DSN each client must have a mapped driver to the computer with the database. For your own server search the Sun site for JDBC drivers or use RmiJdbc (http://www.objectweb.org/)

  • How to set color for a tabstrip in BSP

    Hello all,
    Can anyone please let me know how to set color for a tabstripn in BSP?
    I am using the below syntax but it still gives me the default color.
    <htmlb:content design="design2003" >
      <htmlb:page title="test " >
        <htmlb:form>
    <htmlb:tabStrip id         = "TabStrip"
                          bodyHeight = "200"
                          bodyColor  = "red"
                          width      = "700" >
    </htmlb:tabStrip>
    </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    Thanks,
    Sandeep

    Hi...
    The below code is working fine for me...
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <htmlb:content design="design2003" >
      <htmlb:page title="stg " >
        <htmlb:form>
          <htmlb:tabStrip width      = "430"
                          bodyColor  = "rgb(88,5,64)"
                          id         = "t1"
                          bodyHeight = "112" >
            <htmlb:tabStripItem id      = "t1"
                                index   = "1"
                                title   = "Sales"
                                tooltip = "My Tooltip for Tab 1" >
              <htmlb:textView text="Tab N 1" />
              <htmlb:tree id        = "treeReports"
                          showTitle = "true"
                          table2    = "<%= mt_nodes %>"
                          title     = "Menu"
                          width     = "100%" />
            </htmlb:tabStripItem>
            <htmlb:tabStripItem id      = "t2"
                                index   = "2"
                                title   = "Production"
                                tooltip = "My Tooltip for Tab 2" >
              <htmlb:textView text="Tab N 2" />
            </htmlb:tabStripItem>
          </htmlb:tabStrip>
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>

  • How to set optional for table structure in functiona module

    hi experts,
    as i have small doubt regarding
    while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure ....
    reagrds prabhanjan

    Ignoring the TABLES/CHANGING/EXPORTING argument...
    while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure
    Why not?  There's no issue with marking a TABLES interface parameter with 'Optional' and publishing the function module or function group as a web service...

Maybe you are looking for

  • Adobe Illustrator CS5 crashes upon launch

    Hi there, I have just installed the Master Collection and all apps work fine, except for Illustrator that crashes upon launch. I tried cleaning font caches, rebooting, running Onyx, etc. But to no avail. The Master Collection is the Czech version. He

  • HT202856 Mac Pro with Samsung UHD 4K TV

    I find it difficult to use a Samsung UHD TV 6950 as the monitor for my Mac Pro.  When I start it at times the Apple start up disk begins, but then the follow up line does not appear and the screen is black.  Any help would be appreciated.

  • I need help uninstalling keynote and then installing keynote from dvd

    Hi Please help- I moved the iwork to the trash emptied it out, ten installed Iwork DVD. It then ask for serial number fr trial version. How do install new iwork without trial popping vback up. Thanks in advance J

  • Create an ICI Adapter

    Hi all, I need to develop an ICI adapter for connecting the CTI to SAP CRM IC 7.0 In my undestanding the ICI framework in on the ABAP stack of CRM, but I can't find the wsdl as indicated in the ICI specification document vs. 3.06 We also installed th

  • I can´t get free update for imovie 09

    i can´t have an iMovie update for imovie 09 plese help me