How to set auto delete option for old messages

Hi All,
Can any one help me on how to set auto delete option for mails older than 15 days from my Z10.
James Kurian

There is no such option in BB 10.
However, you can achieve a similar result by setting your email sync timeframe to 14 days (the closest option).
If you are using an ActiveSync account (such as Hotmail, Outlook.com), go to Settings > Accounts > select the account. Tap advanced at the bottom of the screen. Scroll to the very bottom, tap Sync Timeframe and set to 14 days.
If you are using an IMAP account (such as Gmail or GMX), you will have to delete, then re-add your account. The Sync Time frame is only avaialble during setup for these accounts. When adding, tap advanced at the bottom of the screen and set the Sync Timeframe.
Hope this helps.

Similar Messages

How to set a folder option for individual folders

This was not an issur for previous Mac OS, but for Marvericks I seem not to be able to save a folder option for individual folders. So, when I change a view option, say, to "View as Icon" for a folder and close it, all other folders also show in the View-as-Icon mode. Is this a bug? Or, am I missing anything? I would want to open a particualr folder in a particular view option. How can I do such?

Use JTextField
http://java.sun.com/docs/books/tutorial/uiswing/components/text.html
And please post Swing questions in the Swing forum.

How to set aspect ratio options for Image Dialog

I have a requiment to create a new Aspect Ratio for image crop, besides the only default option of Free Crop
I understand that there was some path where you could set this up in CRX, prior to 5.5, but that path doesn't exist in 5.5. The path was /libs/cq/packaging/components/pack/definition/dialog/items/tabs/item s/tab3/cropConfig
I found this out from this forum question:http://forums.adobe.com/message/4575600#4575600
Where in CQ5.5 Can I set these aspect ratios? I've queried the entire CRX for nodes of similar names as in this path, but cannot find it anywhere.
Thanks guys!

Hi,
I have the same problem using CQ 5.6.1. I want to extend the default Ratios:
I found out that this config is located under /libs/dam/gui/content/assets/crop/items/actionbarcontainer/items/default/items/aspectrati o/items.
My question is were and how can I put an extension to these predefined ratios if I don't want to edit them under the libs node.
Thanks, Andreas

10.6.6 - How to set custom view options for specific folders

How is it that Windows has had the ability to ability to set custom folder view options forever and OSX can't. What is the big deal? Just do it. Whenever I set the folder view options it changes the view for all the folders. I can do folder specific changes as long as the finder window is open then I close it and open it again every folder is the same again. It's just an annoyance and it's something so rudimentary it's embarrassing.

Try the following:
I want to have, say, one folder in list view
Open that folder, set it to list view, type command-J, and in the view-options window that opens, check the box at the top for "Always open in list view".
then the subfolder of that folder I want to have in cover flow view. permanently.
Open that folder, change it to cover-flow view, and in the view-options window check the box at the top for "Always open in cover-flow."
Those two folders should "remember" the custom views that were set for them.
There's additional discussion about the meaning of the"Use as defaults" button in this thread
http://discussions.apple.com/thread.jspa?messageID=13063792
My own take is that folders that have not been customized by checking the "Always open in xxx view" box will by default open in the same view (icon vs list vs column, etc) that was in effect for the previously opened folder. *Within each view*, you can set the default parameters (text size, etc) for a new folder by setting up a folder the way you like and then checking the view options box for "Use as defaults" at the bottom.

How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

Hi Friends,
How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
Appreciate your valuable answers!!
Thanks,
Amirineni

Amirineni,
AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
Alternatively, if this is a must requirement, you can generate the FA from backend and send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

How to set up Airport Extreme for 11ac and 11n?

I have just purchased the new Airport Extreme (August 2014) because Apple's website states
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
I have number of Macs in my home from a new MacBook Pro with Mavericks to a Macbook Air with Snow Leopard (due to required software) and iPads.
So after setting up the new Extreme my new MacBook only accesses 11n as does my older Macs. I checked by holding down the option key while clicking the WiFi icon at the top of my Mac. Well, not so automatic then as I was expecting 11ac and 3 times faster access (as stated by Apple).
I then looked for some documentation for setting up but cannot find anything.
Hence my question here.
How to set up Airport Extreme for 11ac and 11n simultaneously?
At present the new Extreme is no better than my previous 2 year old one.
Thank you.
Michael

How to set up Airport Extreme for 11ac and 11n simultaneously?
Assuming that it is operating correctly, 802.11ac and 802.11b/g/n are broadcast simultaneously by default.
Simultaneous dual-band support.
AirPort Extreme features simultaneous dual-band 802.11ac Wi‑Fi. That means it transmits at both the 2.4GHz and 5GHz frequencies at the same time. So no matter which band your wireless devices use, they’ll automatically connect to the best available band for the fastest possible performance.
That is advertising. The real information is usually found in the small and hard to read footnotes:
Based on theoretical peak speeds. Actual speeds will be lower.
AirPort Extreme is based on an IEEE 802.11ac draft specification. Performance based on comparison with Apple’s 802.11n products. Comparison assumes AirPort Extreme network with 802.11ac-enabled computer. Speed and range will be less if an 802.11a/b/g product joins the network. Accessing the wireless network requires a Wi‑Fi-enabled device. Actual speed will vary based on range, connection rate, site conditions, size of network, and other factors. Range will vary with site conditions.
Since the 802.11ac signal is being broadcast only using the 5 GHz band, some users report that they have had better results by using the option to assign a different name to the 5 GHz band, and then pointing their Mac to that specific signal or network. You may want to try that option.
But first as a test, please locate the MacBook Pro about 10-15 feet or 3-4 meters from the AirPort Extreme with clear line-of-sight between the two devices. Restart both the AirPort Extreme and the Macbook Pro and then check to see if the Mac is connected to an 802.11ac signal.
If not, please power off your other wireless devices...computers, mobile devices, etc. temporarily, and try the same test again.
Please report on your results.

"I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library. Can't find it. Thanks

"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!

From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How to use the print option for photos?

How to use the print option for photos. I have a wireless printer but how do I set it up?

http://www.apple.com/support/iphone/assistant/airprint/

Sun ONE Studio 4 aka Forte: How to set the output path for classes ?

Help !
Beginner's question:
Sun ONE Studio 4 aka Forte:
How to set the output path for classes ?
As default, the class files are created in the same directory as the
sources.
In opposite, both JBuilder and Together support that there is a tree
with the sources and another tree with the classes.
The first answer I got was "not possible with Forte, but just if you write your own "ANT Build script" !
a) Please point me to a ready-to-use ANT script for this purpose, if such is available
b) Is using ANT instead of the MAKE as comfortable ? Besides the separation of sourcecode and classes, I would like to keep everything else to be the same, i.e. I don�t want to edit the ANT file if I enlarge the project by directories or files.
Tia
Sincerely
Rolf

You can set S1S's options to place newly created .class files in a specific location.
Identify the compiler that is being used - Open the S1S's Tools/Options window, expand Editing and select Java Sources. Note the Default Compiler value. (If it's one if the Ant options, you use Ant to specify this option, not S1S.)
Open the S1S's Tools/Options window, expand Building/Compiler Types and select the appropriate compiler.
The Properties tab of the compiler has the property Target, which sets the filesystem where the compiler output is directed. If you choose <not set>, the .class files are written to their source directory.
When you set the Target, your change affects all classes that use this compiler.
Very few options can't be set in S1S; the challenge is finding out where they're set!

How can I change view options for ALL playlists?

How can I change view options for ALL playlists? With one single click or trick?
I have a lot playlists and don't want to change every single one of them separatly.
Thanks for your help. (I use Windows 7)

There's no FAST way I know of, which is what I think you mean.
Only the painful SLOW way of one-by-one.
You could make a new playlist from the main library after you've set the columns up as you like.
Go to an existing playlist that doesn't have the columns you want, and select all.
RIght-click > Add to Playlist and send them to the new playlist.
That's still one-by-one and only works with static playlists, not smart ones.

Does anyone know how to hide the export option for excel 2007

Does anyone know how to hide the export option for excel 2007?
We are having an issue with negative numbers downloading as text field in excel 2007, works fine in excel 2003.
We are on version 11.1.1.7.0 of OBIEE.
Thanks for any response.

Go to iTunes>Preferences>Devices and highlight the backup you want to delete and click on Delete Backup

How to set custmer master block for posting & how to set the status .....

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. Use an appropriate subject in your message thread. >
Hi ...
How to set custmer master blocked for posting & how to set the status has deleted. please provide the steps for the above two actions.
thanks

Hi,
U can use T-code FD05 for Blocking the customer and
T-code FD06 in order to set for deletion,
Assign Points if useful,
Regards,

How to set the stack size for alchemy application?

Anybody know how to set the stack size for alchemy application?
If you know, please tell me how to adjust the stack size for alchemy application?

Hi,
The stack size is set as public const gstackSize in the alchemy generated code. You can see this if you build with ACHACKS_TMPS set. The default is one megabyte.
One way to change the stack size is to use llvm-dis to disassemble avm2-libc/lib/avm2-libc.l.bc, generating avm2-libc.l.ll, modify the constant, and then use llvm-as to recompile your modified library and overwrite the old one. These utilities should be in your path if alchemy is set up.

How to set auto backup as like quark express

Hi,
I want to know how to set auto backup opening files in InDesign 6 as like quark express

InDesign restores everything after a crash.
Versioning was removed aw hile ago, now you should set it up on OS or computer level or use a cloud service like dropbox which offers such functionality.
For formatting use Paragraph Styles, for exceptions use Character styles. It is a no-go to make a font bold, it must be done via styles. I think it is a problem with Quark documents that people bolded with the B button their text, this caused false styles and did no semantic styling which would not allow to create PDF/UA documents.
Paragraph and Character Styles are completely different in InDesign than in Quark. In InDesign every font property is defined in a paragraph style. Character Styles are only used for exceptions and only the different properties are defined. E.g. if you have black text and want some words or letters to be red the InDesign Character style would define only the property character color to red, everything else would remain empty. So you could apply the same character style to text with different paragraph styles with different fonts and sizes. In Quark you would have to set up a different character style for each paragraph style.

How to set auto delete option for old messages

Similar Messages

Maybe you are looking for