How to set BIOS for USB boot on Satellite A50-110?

Hi.
I own a Toshiba Satellite A50-110 and I have a bootable USB flash drive, but I don`t know how to boot from this USB drive.
I suppose I need to access and configure BIOS. How can I do it? Where do I get information about this? What are the steps to complete this task?
TIA

Hello
As far as I know in BIOS cannot be configured anything. As far as I now on this old notebook you can use just USB floppy disc drive for boot up (press U key at start up) but not USB flash drive.
Enter BIOS settings with ESC key at the start up and check all listed bootable devices.

Similar Messages

  • How to set NIC for networking on Toshiba Satellite 1415-S173

    How to set NIC on Toshiba Satellite 1415-S173? How can i check that NIC is recocnised by
    OS (Solaris 8 0n x86), what driver should i install? how can i get it?

    Check out this guys page and links...
    http://www.cscs.westminster.ac.uk/~douglap/
    There have been some issues with PCMCIA based nics that you might discover on this page or some of the links referenced.
    good luck
    Lee

  • Need XP Drivers for Windows XP on Satellite A50-110

    Please help! I've look all over for my model (SA50-110) on Toshiba's
    website but it's as if they never made this model. I googled it and found where someone needed help loadking the DVD drivers. Can someone tell me where to go to get drivers or what model is equivalent to my SA50-110?

    Hi!
    If you need drivers for your notebook you must search in the *Archive* on the Toshiba website:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Archive => Satellite => Satellite A Series => Satellite A50
    Normally you dont need drivers for the DVD drive. Its a part from the OS (operating system) and you must not install such drivers.
    Bye

  • How to set View for Completed items inside Tasks?

    How to set button for 'View' and see Completed items or not completed inside Tasks?

    Hi,
    You want to set custom views for Tasks folder so that when we click a view button, it will show all Completed or incomplete tasks, am I correct?
    Which version of Outlook are you using? There are existing views for completed/incomplete tasks in Outlook. In Outlook 2010 and Outlook 2013, we can find the buttons under View tab > Change View. Click Completed button to view all completed
    tasks; Click Active button to view incomplete tasks.
    In Outlook 2007, just click View > Current View to switch between different views.
    If I've misunderstood something, please feel free to let me know.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to set  password for BPEL domain

    Hi,
    I am new to SOA.
    I want to setup client-server environment for few developers.
    I installed SOA 10.1.3.3 in the server machine.
    And I created few domains in BPEL, one for each developer.
    It didn't ask me to set the password while creation of the domain.
    Please let me know how to set password for newly created domain so that each developer login to his/her own domain and manage processes.
    Thanks!!!

    Thanks for the prompt response.
    What roles should I give to my developers to allow them to manage their services in ESB control, BPEL control, WSM control.
    And I would like to know how to set the password for a BPEL domain too.
    Message was edited by:
    user644377

  • How to set password for every application

    Hi,
    As a administrator how to set password for every weblication in sharepoint 2013.
    Is there any way to set?
    Thanks,

    Who's password are you trying to set? Please provide more details.

  • How to set password for a zip file and should be checked when reading that

    Hi friends,
    how to set password for a zip file and should be checked when reading that file???
    thanks.
    Praveen Reddy.J

    Heyy man, i think, u did not get my problem.
    all i have to do is:
    i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
    Tanks for reply.

  • How to set password for Local are connection?

    How to set password for Local are connection?

    do you mean the 802.1x authentication?
    check out links below:
    http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2950/software/release/12-1_9_ea1/configuration/guide/scg/Sw8021x.html
    http://technet.microsoft.com/en-us/network/bb545365.aspx
    Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    IT Stuff Quick Bytes

  • How to set value for trim and bleed using jsx script?

    I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
    Following is the code I am trying with:
    var _saveName = new File ( root_path +_strFileName+".pdf");
        var _saveOpts = new PDFSaveOptions();
        _saveOpts.printerResolution = 300; 
        var bleedarray = new Array();
         bleedarray[0] =9.00;
         bleedarray[1]=9.00;
         bleedarray[2]=9.00;
         bleedarray[3]=9.00;    
        _saveOpts.bleedOffsetRect = bleedarray;

    I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
    var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
    Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

  • How to set sourceURL for MS Access database in other computer?

    How to set sourceURL for MS Access database in other computer?
    getConnection("jdbc:odbc://www.micrsoft.com:9999/msaccess");
    How do you determine the port for the MS Access?
    Thank you very much.

    How to set sourceURL for MS Access database in other computer?You don't.
    How do you determine the port for the MS Access?You don't.
    Databases like Oracle and MS SQL Server have 'server' software which runs on a server computer. Requests talk to that server software. MS Access does not have a server, so there is nothing to talk to.
    You either must use a DSN or create you own server. For the DSN each client must have a mapped driver to the computer with the database. For your own server search the Sun site for JDBC drivers or use RmiJdbc (http://www.objectweb.org/)

  • How to set color for a tabstrip in BSP

    Hello all,
    Can anyone please let me know how to set color for a tabstripn in BSP?
    I am using the below syntax but it still gives me the default color.
    <htmlb:content design="design2003" >
      <htmlb:page title="test " >
        <htmlb:form>
    <htmlb:tabStrip id         = "TabStrip"
                          bodyHeight = "200"
                          bodyColor  = "red"
                          width      = "700" >
    </htmlb:tabStrip>
    </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    Thanks,
    Sandeep

    Hi...
    The below code is working fine for me...
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <htmlb:content design="design2003" >
      <htmlb:page title="stg " >
        <htmlb:form>
          <htmlb:tabStrip width      = "430"
                          bodyColor  = "rgb(88,5,64)"
                          id         = "t1"
                          bodyHeight = "112" >
            <htmlb:tabStripItem id      = "t1"
                                index   = "1"
                                title   = "Sales"
                                tooltip = "My Tooltip for Tab 1" >
              <htmlb:textView text="Tab N 1" />
              <htmlb:tree id        = "treeReports"
                          showTitle = "true"
                          table2    = "<%= mt_nodes %>"
                          title     = "Menu"
                          width     = "100%" />
            </htmlb:tabStripItem>
            <htmlb:tabStripItem id      = "t2"
                                index   = "2"
                                title   = "Production"
                                tooltip = "My Tooltip for Tab 2" >
              <htmlb:textView text="Tab N 2" />
            </htmlb:tabStripItem>
          </htmlb:tabStrip>
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>

  • How to set up an USB game controller

    How to set up an USB game controller on a mac? I am at wits end! Need some help?

    If you already have an iTunes account, simply use that. You do not need a new account.
    Open the iTunes app on the iPad. Go to the bottom of the screen and tap Sign in.

  • How to set optional for table structure in functiona module

    hi experts,
    as i have small doubt regarding
    while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure ....
    reagrds prabhanjan

    Ignoring the TABLES/CHANGING/EXPORTING argument...
    while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure
    Why not?  There's no issue with marking a TABLES interface parameter with 'Optional' and publishing the function module or function group as a web service...

  • How to set value for radio button in sap crm survey suite

    Hi ,
    I created a survey in CRM Service, in which I added a question with answer as '10 Selection Button Group ('radio button'). And answer has 11 answer options (which means 11 radio buttions). Now when we test the survey, the value for the radio buttons is appearing like 'id_0050569b03091ee480a29d8ee61e953c'. But i want to set a specific value for each radion button (from 1 to 11). So, how to set value for radio button in sap crm survey suite???.
    Thanks & Regards,
    Seshu

    Hi,
    I found solution myself. Click on Goto -> Editing Mode -> Expert Mode. Now you can set value for radio button.
    Regards,
    Seshu

  • How to set value for selectOneChoice

    Hello,
    How to set value for selectOneChoice defined as:
    <af:selectOneChoice label="Label" id="soc1" binding="#{DepositorMergingBean.socSurnameComponent}">
    <f:selectItems id="si1" value="#{DepositorMergingBean.socSurnames}"/>
    </af:selectOneChoice>
    where socSurnames is List<SelectItem> - manually filled list of SelectItem(SomeObject, (String)text_description), so - SOC is filled manually (no binded iterators, etc..)
    Neither socSurnameComponent.setValue( new Integer(0) ) nor socSurnameComponent.setValue( socSurnames.get(0) ) do not help.
    Thanks in advance.

    this.selectOneChoice.setValue(selectItems.get(2).getValue());Try as per the following sample:
    SelectOneChoiceTest.JSPX:
    <af:form id="f1">
    <af:selectOneChoice label="Select One Choice" id="soc1"
    binding="#{SelectOneChoiceTestBean.selectOneChoice}">
    <f:selectItems value="#{SelectOneChoiceTestBean.selectItems}"
    id="si1"/>
    </af:selectOneChoice>
    <af:commandButton text="Set Selected Value" id="cb1"
    actionListener="#{SelectOneChoiceTestBean.onClick}"/>
    </af:form>
    SelectOneChoiceTestBean.java:
    import java.util.ArrayList;
    import java.util.List;
    import javax.faces.event.ActionEvent;
    import javax.faces.model.SelectItem;
    import oracle.adf.view.rich.component.rich.input.RichSelectOneChoice;
    public class SelectOneChoiceTestBean {
    private RichSelectOneChoice selectOneChoice;
    public SelectOneChoiceTestBean() {
    super();
    private List<SelectItem> selectItems;
    public void setSelectItems(List<SelectItem> selectItems) {
    this.selectItems = selectItems;
    public List<SelectItem> getSelectItems() {
    selectItems = new ArrayList<SelectItem>();
    selectItems.add(new SelectItem("One", "One"));
    selectItems.add(new SelectItem("Two", "Two"));
    selectItems.add(new SelectItem("Three", "Three"));
    return selectItems;
    public void setSelectOneChoice(RichSelectOneChoice selectOneChoice) {
    this.selectOneChoice = selectOneChoice;
    public RichSelectOneChoice getSelectOneChoice() {
    return selectOneChoice;
    public void onClick(ActionEvent actionEvent) {
    this.selectOneChoice.setValue(selectItems.get(2).getValue());
    Thanks,
    Navaneeth

Maybe you are looking for