How to set components aligned in left when we use BorderLayout
Hello All,
How to set the components aligned in the left when we use BorderLayout in a panel.Right now,the components are getting aligned in the center.
Any solutions?
Thanks in advance,
Vijay
By default a JPanel uses a FlowLayout when created and by default a FlowLayout uses center alignment. Read the FlowLayout API to find out how to use left alignment.
Also each individual component has an alignmentX and alignmentY value which is set to 0.5 (center aligned). Some LayoutManagers will take this value into consideration. Read the Component API for more information.
Also, check out this section from the Swing tutorial on "Using Layout Managers":
http://java.sun.com/docs/books/tutorial/uiswing/layout/using.html
Similar Messages
-
How to set my own gui status when i use selection-screen
how to set my own gui status when i use selection-screen command
and
how to set the names in the application tool bar when function keys are createdMake sure that you do this in event "AT SELECTION-SCREEN OUTPUT".
Run Txn ABAPDOCU and check 'DEMO_SEL_SCREEN_STATUS' for sample.
Also check out following discussion -
Selection Screen PF-STATUS
Cheers,
Sanjeev -
How to set H align of title for columnGroup
Hi
advancedTable has columnGroup and this columnGroup has two different columnGroups as child.
The title of top columnGroup is located at left side however thoes of two children(columnGroup) are at center.
I want to place the title of top columnGroup at center.
Please advise how to set H align of columnGroup's title or show me any other ways.
Thanks..
Message was edited by:
user604638The following assumes that you are using ICM with an IPIVR etc (not using CVP), as the answer is different for CVP
What you are looking for is called "Ring no answer time". It is set in the Agent Desk Setting List tool.
Regards,
Kevin -
How to set column alignment in JTable
I make a table with JTable(Vector a, Vector b).
I don't know how to set the alignment to right while the column type is Integer or Long.
Do i have to use JTable(Object[][] a, Object[] b) ?Well , you can configure the alignment when you are creating the column, like
for (int i=0; i<7; i++){
//Size of cell
int colunaTam = 50;
//Define Allingment
int cellAlinhamento = 4; //Right Aligment
//Column
javax.swing.table.TableColumn coluna;
BusinessObjects.CellColorRenderer renderer = new BusinessObjects.CellColorRenderer();
//Define alingment in cell render
renderer.setHorizontalAlignment(cellAlinhamento);
coluna = new javax.swing.table.TableColumn(i, colunaTam, renderer, null);
ivjJTableDespachos.addColumn(coluna);
Hope i help you...
Ice -
How to set fetchsize of sql Query when using Database Adapter.
Hi All,
I am using DatabaseAdapter to connect to database and retriving huge amount of data.For improvement in the performance I want to set the "fetchsize" of sql query. I know fetchsize can be preset in Java using Jdbc 2.0 API.Please let me know how to set this value in BPEL when using DBAdapter?
Thanks
ChandraI talked to the developer of the db adapter - and he told me this feature will be available in BPEL PM 10.1.3 (which is supposed to be production later this year, and a public beta soon). If this is an emergency I would recommend going throug Oracle support and have them file an enhancement for 10.1.2.0.2
hth clemens -
How to set a rescue email address when I already have an Apple ID. Actually I forgot my security questions.
You won't be able to add one until you can answer your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use -
How to set field alignment in a table in jdev 11.1.2.3?
hi,
How to set field alignment in a table in jdev 11.1.2.3?
eg: to diplay a number field in a table as right aligned.
I have tried to set field(amount) VO UI Hint Format Type:Number; Format: 0000.00
and jspx as flowing, but it doesnot work.
Thanks.
bao
<af:column sortProperty="#{bindings.VO1.hints.Amount.name}"
sortable="true"
headerText="#{bindings.VO1.hints.Amount.label}"
id="c44" width="60"
align="center">
<af:inputText value="#{row.bindings.Amount.inputValue}"
label="#{bindings.VO1.hints.Amount.label}"
required="#{bindings.VO1.hints.Amount.mandatory}"
columns="#{bindings.VO1.hints.Amount.displayWidth}"
maximumLength="#{bindings.VO1.hints.Amount.precision}"
shortDesc="#{bindings.VO1.hints.Amount.tooltip}"
id="it58"
secret="false"
inlineStyle="text-decoration:overline;">
<f:validator binding="#{row.bindings.Amount.validator}"/>
</af:inputText>
</af:column>Works for me:
<af:column sortProperty="#{bindings.EmployeesView1.hints.Salary.name}" sortable="false"
headerText="#{bindings.EmployeesView1.hints.Salary.label}" id="c7" align="right">
<af:inputText value="#{row.bindings.Salary.inputValue}" label="#{bindings.EmployeesView1.hints.Salary.label}"
required="#{bindings.EmployeesView1.hints.Salary.mandatory}"
columns="#{bindings.EmployeesView1.hints.Salary.displayWidth}"
maximumLength="#{bindings.EmployeesView1.hints.Salary.precision}"
shortDesc="#{bindings.EmployeesView1.hints.Salary.tooltip}" id="it6">
<f:validator binding="#{row.bindings.Salary.validator}"/>
</af:inputText>
</af:column>JDeveloper 11.1.2.3
Salary is shown right-aligned.
What happens if you get rid of your inlineStyle on the af:inputText -
How to set change number is prerequisite when change BOM?
Dear SAP Experts,
I have actived EC management in BOM control data in IMG. But when i changed
BOM ( the code CS02 ) with change number blank, system had not given an error message. SO,how to set change number is prerequisite when change BOMs?
Thanks...
Regards,
Joey.Just a guess: Transaction os27 and change the number range to external.
Matthias -
How to set the POV in WebAnalysis when data source is HFM?
Hi Every one..
Could any one tell how to set pov in web analysis when data base is HFM. And hoe to make the report Dynamicall (Current Pov Member like in FR). for this if use Essbase Ican get it it easiliy by using Subtitutional variable but is ti possible fo rHFM.
Thnaks in advance
Raoyeas agree with sanakar,
this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
Hope u understand this. -
Does anyone know how to set up the wireless router when y...
does anyone know how to set up the wireless router when you have a Vonage modem and a cable modem? HELP!
You mean u got 2 modems ?
C | EH
linksyshelp.blogspot.com -
Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB
Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB
Cant we even use the dlls in an application?
In order to automate Acrobat, you need to have Acrobat installed. There is
nothing you can do with just the DLLs. As was already stated, Acrobat is
not licensed for use on a server, but regardless of that, it's also
not technically suitable for server use. You need to find a solution
outside of Acrobat to solve your problem.
It also seems that you don't have a good understanding of what is going in
inside a PDF file. PDF is a very complex file format, and based on
your questions
and followup questions, you need to spend a considerable amount of time
getting familiar with the PDF file format to understand how color works in
the PDF context. Reader the PDF spec, while paying special attention to the
section about color. You will find out that if you want to convert the
color space of a "PDF file", you actually need to convert the color space
associated with every single object in your PDF file. That is fairly simple
for vector graphic and text, but when it comes to images, you may have to
convert the image data. Once you have a good understanding of what it is
you need to do within the PDF file, then you can start looking for tools
that allow you to do that. Again, Acrobat and therefore the Acrobat SDK is
not suitable for this task. If you want to stay with Adobe products take a
serious look at the PDF Library, which his licensed through Datalogics (
http://www.datalogics.com/products/pdf/pdflibrary/). As you've mentioned,
there are other, non-Adobe PDF libraries that you can also use, but this is
the Acrobat SDK forum, so I won't discuss any of those 3rd party solutions.
You are wasting your time while looking for a simple solution that does not
exist. -
Can I set a default home page when people use my router?
Can I set a default home page when people use my router?
Can I set it to my web site for example so that people have to go there when they connect?
Thanks,
PaulHello EireReality. Welcome to the Apple Discussions!
Can I set a default home page when people use my router?
No, at least not that I'm aware of. Setting a "default home page" is typical feature of a web browser, not an Internet router. -
How to set default alignment in transition?
Hi!
Please tell me how to set as DEFAULT, the alignment "Center at Cut" of the transition for video?
Thank you andvance!The default is center at cut. But if one of the clips has not enough handles it will set it self off center, using the frames of the clip that does has enough handles.
If you want your transition always in the middle make sure both clips have at least 15 frames trimmed off. -
How to set Max. no. of hits when i display data
Dear Experts,
when i display data in ODS/Infocube, i hope display data of the default value is 1000,how to set Maximum number of returned records.
in SE11, i have goto utilities>settings>repository infosystem-->maximum No. of Hits 1000
but still no any effect, how should i do it?
Many Thanks
Best Regards
StevezhuangSteve,
If I'm not wrong you are talking about the number of hits while displaying the table content right, if yes that's what i was discussing.
goto se11 -->enter the table name --> click on display --> click on contents -->it will take you to table selection screen there in that screen you will find the below options,
in the menu bar -->settings --> user parameters --> change the max no of hits :1000 and click OK.
You can set the desired max number of hits- that's wht i was talking about.
Regards
prashanth -
How to set a user status (complete) when ever system status is set complete
Experts,
We have configured status profile and few user status (say open, pre-release, complete) and assigned the status profile to the item category(zxxx).
The problem we have is if we have a service order that is created with the item (item category zxxx) -- Say the header status is open and the item status is pre-release. Now end user comes and sets the header status to completed - then the item status is still set pre-release. It is not changing to complete as expected.
Yes, the Item system status is set to completed but not the user status. How do I configure to set a complete user status when the header and item system status are set to completed.
Thank you
Edited by: ram on May 4, 2010 8:51 PMI am not sure if this can be "reverse engineered" in Status profile.
But here is some hint. You can use the BAdI CRM_ORDER_STATUS mehtod AFTER_CHANGE and actually break when the Header status is changed, and set the item status as desired.
Maybe you are looking for
-
My iPad mini, iOS 8.2 continuously keeps bringing up the message sign into iCloud. However, the account it wants me to sign in to is not mine but my mums, and when i try to delete it it will not let me.
-
Hi, I have such problem when I open in Excel 2010 14.0.7128.5000 (32 bit) a xlsx-file containing pivot tables and slicers connected to SSAS 2008 R2 cube: - Excel found unreadable content in '...'. Do you want to recover the contents of this workbook?
-
Hi Gurus, I am new to rules, i have to understand some code and need to modify. I very new to rules. I have a doubts regarding rules. What is the use of "&" sign in rules? How do we use this in rules? And could you plz explain below statements. 1) HS
-
Archiving documents having open item managed accounts
Hi All, We have a requirment to archive accounting documents older than 2 years. I would like to know if it is possible to archive those accounting documents which have postings on open item managed accounts. Example: If I have an accounting document
-
V_V2 (Reescheduling)
Hi gurus, We have a trouble with a particular situation in sales order. This is the situation: In Stock 10 qty Sales Order 1 10 qty Delivery date 31.12.2008 Purchase Order 50 qty Delivery date 01.06.2008 Sales Order 2 1 qty Delivery date 18.04.2008 S