How to set default Reply-To address

i'm using mac mail 3.6.
occasionally I get email bouncing back as undeliverable and the reply to address is not my email address.
is there a way to create a default Reply-To adress as in Entourage?

I don't know why this happened. this is some weirdness on the other end with the server that bounced your emails. but the emails did come back, right? do you have any evidence that when people reply to your emails regularly they are actually sent to wrong addresses? if not you should leave it alone. I don't believe there is anything wrong with your mail.
P.S.to test this further select any message in your sent folder and go to view menu->message->raw source. does it have any weird emails in it? because a reply will based on the address contained in the raw source of your message. if there is nothing strange there the problem is on the other end as I said.
Message was edited by: V.K.

Similar Messages

How to set default selected checkbox in af:tableSelectMany /

Hi,
I am new to ADF technology, I am using JDev 10..3g.
I want to set the checkbox as default selected for particular rows.
but I don't know how to set default selected checkbox in <af:tableSelectMany />
Is there any way to do this using ADF<af:tableSelectMany />
Thanks,
Mohammed

Hi Jeroen,
Thanks for reply. but the problem is that I am getting data from database and based on some flag I need to select checkbox while page is loading first time.
at that time the table is null as till now it not rendered. and when its rendered it means page is displayed now.
just before display I need to set checkbox as selected.
I don't want to do like this (when user is pressing any command button then only is should update checkbox selection).
Thanks,
Mohammed.

Adding a Default Reply-To Address

Hello all,
Is there any way to set a default reply-to address? I always want to send via .Mac but it won't let me set my redirection email address in the From. So I always want my reply-to to be an alternate address.
Thanks,
John

the method shown in the thread about adding a message
receipt
http://discussions.apple.com/message.jspa?messageID=71
3245#713245
should also work for a default reply-to header (of
course, you would use "Reply-To:" instead of
"Display-Notification-To:" when running the command
in the Terminal).
I'd really like to have a Default Reply-To Address - have tried the suggestion above, but can't make it work.
I quit Mail, opened Terminal, copied in
defaults write com.apple.mail UserHeaders '{"Reply-To:"="[email protected]";}'
pressed return. Re-opened Mail, but no joy.
(I tried it with and without a colon after Reply-To.)
Is there a step I'm missing?
Thanks for any help.

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

How to set default reject reason in VA01 (create sales order)

Hi
Everybody can tell me how to set default reject reason for item in sales order.
in our sap system there are a default reject reason as '90'. We want to set it as "Null".
Thanks
Henry

Hi,
Assigning a default Reason for Rejection is not in standard SAP. I am sure there is some enhancement/user exit which updates the reason for rejection.
Please get the help of an ABAPer, create the sales order in debugging mode and he will find out the logic behind the automatic reason for rejection.
Before that you can find the exits in the include MV45AFZZ for any code related to this.
Hope this helps

In Transaction code va41 how to set default sales contract start date

Hi ,
In Transaction code " VA41 " how to set default sales contract start date and end date.
Can any one tell me the correct user exit for the same.
Thanks
Basu

hi,
u have to use user exits or badis.
use sutable exits mentioned below.
SDTRM001 Reschedule schedule lines without a new ATP check
SDVFX006 User exit: Tax line (transfer to accounting)
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Edited by: katigiri linganna on Apr 28, 2009 12:19 PM

How to set default file path while downloading alv output

Hi,
Can anyone tell me that how to set default file path while downloading the ALV output to system using Local file button on tool bar.
Please look below screenshots:
Kindly help me resolve it.
Thanks in advance.
Regards,
Ashutosh Katara

This information initial value is (maybe) stored in Windows Register (register.exe) at Software\SAP\SAPGUI Front\SAP Frontend Server\Filetransfer -> PathDownload, you can read it thru class CL_GUI_FRONTEND_SERVICES method GET_UPLOAD_DOWNLOAD_PATH and update it thru method REGISTRY_SET_VALUE. (Else there may be some parameter ID to force data, but I'm no longer sure)
Regards,
Raymond

How to set default User preferences in Analyzer for all users

How to set default User preferences in Analyzer for all users Hi, I would like to set some settings in Analyzer as default for all users. For example: 1. Display | Char 2. right mouse click on char | Chart Properties 3. Axes tab 4. "Format: Currency" i would like to change to "Format: Number". How to set default values to all users? Is this possible? Thanks, Grofaty

I'm pretty sure higher access superceedes, so you could set up a group with no actual access, just to get the preferences working, then their individual security will dictate what they can do. I haven't tested this fully, but I beleive this is how it will work. As far as setting the preferences, go into the admin console and right click on the group, then select Preferences. To apply the group preferences to a user, add the user to the group, then right click on the user, select preferences and from the upper left corner, use the drop down to select the active preference, in this case, it will be the group you created and added them to. HTH

How to set default locale in JDK1.3.0 to US?

Hi, everyone!
I found the default locale in JDK 1.3.0 is not set to US when I converted our JDK from 1.2 to 1.3.0. So I have to change code by passing Locale.US.
The output from below test code is:
default=��100.00
US=$100.00
import java.util.Locale;
import java.text.*;
public class TestCurrency
public static void main(String[] args)
int amount = 100;
//default
NumberFormat moneyWriter = NumberFormat.getCurrencyInstance();
System.out.println ("default=" + moneyWriter.format(amount) );
//US
moneyWriter = NumberFormat.getCurrencyInstance(Locale.US);
System.out.println ("US=" + moneyWriter.format(amount) );
Can anyone tell me how to set default locale in JDK 1.3.0 to US?
Thanks!

You have to set something on your computer (outside Java) to tell it that you are in the US. You didn't say, but I'm going to guess that you are using Windows; if that's so, then try Regional Options in Control Panel.

HT5312 How to set a rescue email address when I already have an Apple ID and I forgot my security questions

How to set a rescue email address when I already have an Apple ID. Actually I forgot my security questions.

You won't be able to add one until you can answer your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

How to set default view for preview?

Every time I open a PDF using Preview I have to set the view to 'thumbnails', then 'two pages up', then adjust the zoom. Complete waste of time.
Anyone know how to set defaults so that it opens in a predictable way?
thanks,

I customized my Toolbar to look like the following. Click the middle button that has the 1 circled. That tells Preview to remember to display pages at actual size (100%). Every file that I open now displays at 100%.

How to set default values in initialization event for select option

Abapers,
I have 3 GL account like 0024831231,0024831238,0024831245.
Please help me how to set default values in select-options ( s_hkont ) in INTIALIZATION event
Thanks

Select option is table <Structure> with fields, low, high, sign & option
you need to append the value into the select option, with appropriate value in low or
example:
S_HKONT-low = <value>
S_HKONT-SIGN = 'I'
S_hkont-OPTION = 'EQ'
append s_hkont.
Default value for select-option also can be added directly in select-option statement.
Regards,
Mahesh

How to set default values in dialog programming

hi gurus
can anyone suggest me
how to set default values in dialog programming
thanks&regards
kals.

it's a bit dirty but I usually just place it in the PBO with a flag for control. It's simple and not too costly i think.
MODULE preRender OUTPUT.
DATA first_time TYPE flag VALUE 'X'.
IF first_time EQ 'X'.
* put your initialization code here
CLEAR first_time.
ENDIF.
ENDMODULE.
-MiR

How to set default value in OAMessageLovInputBean?

Hi,
How to set default value in OAMessageLovInputBean while loading the page?
I have tried the following code but its not working.
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
String delToLoc = (String)pageContext.getSessionValue("deliverTOLoc");
Number delToLocId = (Number)pageContext.getSessionValue("deliverToLocId");
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject poHeadervo =
(OAViewObject)am.findViewObject("PoHeaderMergeVO");
PoHeaderMergeVORowImpl poHeaderVoRow =
(PoHeaderMergeVORowImpl)poHeadervo.getCurrentRow();
if (delToLoc != null && !"".equals(delToLoc)) {
// poHeaderVoRow.setShipToLocation(delToLoc);
OAMessageLovInputBean msb = (OAMessageLovInputBean)webBean.findIndexedChildRecursive("DefaultShipToLocation");
msb.setValue(pageContext,delToLoc );
Please suggest me how to resolve this issue.
Thanks & Regards,
Sunita

Hi Cristoph,
We tried all the way but could not able assign characteristics value before saving the document. it means we can only see the assigned value using transaction CV02N. but our requirement is to check if the user fills any value into characteristics it should check with default value which we would like to assign whenever we create a new part of the document which we are not able to achieve.we tried a lot but could not succeed.
Nay idea if we can achieve this....
Regards
Bhuwan Tiwari

How to set default selection in html:radio

hai
how to set default selection in <html:radio>.

No it won't help.
You can't set a value into an <input type="file"> control at all. The user has to put values in themselves.
The reason behind this is security. If the programmer could put any value they liked in there, you could upload any file at all from a users computer without their intervention. eg C:\windows\system32\passwords.txt
Bottom line: you can't put a default value into the input type="file" control.
And a good thing too ;-)

How to set default Reply-To address

Similar Messages

Maybe you are looking for