How to set delv. completed in 2nd line item which created in PO by default

Dear guru,
When creating 1st line item by default the 2nd line item has been created. I understand that the 2nd line item is free because no net price has been stated but free good check box in not ticket. Further more the 2nd line is grayed out including all tab in item details. Meaning we can't do any changes in this line item.
User set delivery completed in 1st line item but couldn't set in 2nd line item. This caused to this PO show still pending for delievery when run the report. How we can set this 2nd line item has delivery completed eventhough GR haven't done fully.
rgds,
nantha

Dear Mahesh,
The 2nd line is free good that assign with 1st line item. This has been set in purchasing info record under condition view. Thus when I create PO for 1st line item, system created 2nd line item as auto default. The issue here is the 2nd line item & all the field that in item details in PO become grayed out eventhough I go to ME22N. I cant do any changes on 2nd line item. I believe there would be some control maintain for free good. Please advice. Thank you.
rgds,
nantha

Similar Messages

How to release Stock blocked against deleted line items from Sales order.

We have Scenario as follows.
Sales order made for items available in stock. Deleted few lineitems from sales order balance items delivered and invoiced. Sales cycle is complete in all sense.
What we have noticed is when we are creating new sales order / Delivery for deleted items from above Sales order it shows deleted quantity is blocked against old sales order. These line items are no longer
available in old sales order since it is deleted also it is not appearing in open sales order report (VA05).
Overall stock available is same as quantity mentioned in deleted line item.
In MD04 - Sales requirenment transaction it shows sales order / line item against which it is blocked.
i.e deleted line item.
How to release these stock and make available for sales. Any standard process available ? or any other solutions
Thanks & Regards,

I got a solution for my question from other forum. for info
Go to SE38 and enter program SDRQCR21 then execute...
Enter line item which is blocked for sales order in MD04 and enter plant then check Data
transfer box and uncheck other boxes... It will pop up information and click yes...
You will get one report and Stock inconsistency will go off and then check it in MD04....
regards

Need to draw line after the 2nd line item(Smart Forms)

Dear Friends,
I need to draw horizontal line after the 2nd line item and 3rd line item in smart forms.How can i achive this.
Plz help.
Edited by: farook shaik on May 19, 2009 8:19 AM

This is what you need to do:
1> In the tables->details section define two line types LT1 and LT2.
2> Come back to tables section pressing the table painter button.
3> Select a line type for which you want to have an underline(say LT2).
     a] If the anchor cursor does not come click the draw lines and columns button( the pencil icon nutton)
     b] select the line type ( it will become black after selection. Press and hold down ctrl to select
         multiple cells.
     c] after selection click the lower 'frame button' ( which is right at the top of box and shading).
4> Now goto data section where you have given your internal table name and work area.
     a] in the sort criteria put your field POSNR and check the Event on Sort end chk box.
     b] you will see an extra node under the main area of the table.
     c] Create a table line with the line type LT2 in the node.
     d]Also in the Main area add another table line with LT1 as the line type.
5> If POSNR remains unchnged LT1 will be triggered.
6> if Posnr changes then LT2 will be triggered with the underline.
This will suffice your requirement.

2nd line item in sales order

hi,
all,
when i am entering a line item in the sales order it is not picking pricing automatically and all the condition types are having records to it. it is triggerring for the same when i enter 2nd line item in the sales order. it is trigerring for the both line items in it.
i dont know what went wrong.
please guide me on that.
if any user exit is not triggerring properly, please let me know
regards,
balai

Hi,
As soon as you create first line item go to Line item Conditions tab and click on the Analysis button and see why your condition is not picked
Save that line item
Add the second line item and go to analysis of that as well.
Save it
Now check the analysis of first line item.
Please note what's the difference there in the first time analysis and second time analysis.
You should be able to figure out why it didn't came first time.
Best regards,
Anupa

How to place a delivery block at line item level from Inbound ORDERS IDoc?

Hi EDI/ABAP Experts,
Can anyone please tell me how to place a delivery block at line item level from Inbound ORDERS IDoc?
I tried using exit "EXIT_SAPLVEDA_001'. But there is no LIFSP field in either of XVBEP and YVBEP structures.
Can you guys throw some light. How to place a delivery block @ line item level on sales order from Inbound ORDERS IDoc.
Thanks,
Matt .

Look into the Include: LVEDAF5A that is the only place where this exit is hit... double click on the Structures and look which structure has billling block field.. and use that..
FORM CUSTOMER_FUNCTION_IDOC USING IDOC_DATA.
CALL CUSTOMER-FUNCTION '001'
    EXPORTING SEGMENT = IDOC_DATA
              DVTCOMAG = VTCOMAG
              DXMESCOD = IDOC_CONTRL-MESCOD
              CONTRL   = IDOC_CONTRL
    TABLES    DXBDCDATA = BDCDATA
              DXVBAP    = XVBAP
              DXVBEP    = XVBEP
              DYVBEP    = YVBEP
              DXVBADR   = XVBADR
              DYVBADR   = YVBADR
              DXVBPA    = XVBPA
              DXVBUV    = XVBUV
              DD_FLAG_P = D_FLAG_P
              DXKOMV    = XKOMV
              DXVEKP    = XVEKP
              DYVEKP    = YVEKP
    CHANGING DXVBAK   = XVBAK
              DD_FLAG_K = D_FLAG_K
    EXCEPTIONS
              USER_ERROR = 01.
If you are in ECC6.0 you can also use Enhancement point : INTERPRET_IDOC_ORDERS_01 SPOTS ES_SAPLVEDA. in include: LVEDAF2U

How to change the amount of Vendor Line Item in FB60

Hi all,
I want to post the invoice in SAP with FB60. The journal is as follow:
Dr. Expense    1000 USD
Dr. VAT-Input    100 USD
      Cr. Account Payable     1100 USD
But the problem, the amount of Account payable is 1000 USD. Because I want to fill the amount in vendor line item (FB60) with the original expense (1000 USD).
I want to ask, there is any configuration in SAP to change the amount in vendor line item which it could be the same with amount of the original expense.
If you ever have same problems, plase share with me
Thanks,
John

Hi,
Thanks for your reply. The result of posting invoice that I want is as follow:
Dr. Expense    1000 USD
Dr. Vat - Input    100 USD
Cr. Account Payable   1100 USD
When posting invoices in FB60, there is a filed "amount vendor line item" at the top. Usually the field is filled with amount vendor 1100 USD, but I want to fill it with the expense amount (1000 USD). Which can be show the account payable 1100 USD.
Is there any configuration to change the field "amount vendor line item" ?
Thanks,

How to split ACC_DOCUMNET03 IDOC after 100 line items for given posting

Hi Friends,
I need to create an IDOC based on the company code and posting date & a particular company code for a given date has reached 100 line items then create another IDOC for that.
EX:
I have 150 Line Items in file
120 Items are related to Company Code "1100" and remaining 30 related to company code "1200"
For this i need to create IDOC's like this
one IDOC with 100 line items which will contain 1100 company code
second IDOC with 20 line items which will contain 1100 company code
Third IDOC with 30 line items which contain 1200 company code
I assume that this can be done through UDF.
Please can you guys help me this.
Thanks in advance.
Thanks,
Vivek.

chk this:
/people/claus.wallacher/blog/2006/06/29/message-splitting-using-the-graphical-mapping-tool

Error while editing PO - deleting service line item and creating material line item.

In SAP SRM Extended classic scenario, PO is in 'ordered' status and contains a service line item. While editing this PO, I delete the service line item and create a new material line item. This gives me the following error.
Back end error: Enter G/L account
Back end error: LIne item still contains faulty items.
This happens only with service- material comibination and no other combination(material-service, service-service, material-material).
I need to know the reason for this issue and how it can be solved?

PO Values (Inc Tax):
Item 1: INR 228 L
Item 2: INR 27.83 L   (Payment also done in 2008)
GR for Item 1: INR 207.46 L
Remaining Comm = INR 21.01 L
Item 1 having 73 sub line items.... fo some of the sub-line items GR for some qty already done in last fiscals.
User changing for remaining qty.
Budget Report values:
Previous Years: Budget, Actual & Assigned = 304.85 L
                            Available = 0      (Carry Forward done for Budget & Commitments)
2011:                   Budget = 75.15 L
                            Actual = 53.86 L
                            Comm = 21.01 L   (Same as Remaining Commitment)
                            Avai = 0.28 L
Hope this will help.

Particular sales order of the same line item hv created multiple production

sir,
I am having a problem in MD04. A particular sales order of the same line item hv created multiple production order.and continously planning is going on... I didn't get why it happens.
Will u please suggest me what should i do in this case?
Regards
Meenu

Hello sir,
yes, ofcourse, for the finished material have the BOM with some semifinished productes which are to be produced .
In co02 , we can go through the collective production order.
One more thing is that, in the multiple production order date(scheduling date) shows in forward(future dates).
For ex:09-05-2010.
Regards
Meenu

How to set delivery complete in scheduling agreement automatically

Hi. I would like to request for help on how to flag delivery complete in an scheduling agreement?
When creating a goods receipt against a scheduling agreement, do we need a user-exit or how is it configured in order to check the quantity receivedthe quantity in the goods receipt and compare it with the quantity in the scheduling agreement (/- de tolerance) and, in case the full ordered quantity has been received, set the flag Delivery completed in the scheduling agreement.
Thanks.

Hi,
We regret that the functionality setting of "delivery completed"
indicator automatically for a scheduling agreement is not included in
the SAP standard system.
For scheduling agreements, you must maintain the final delivery
indicator only in the scheduling agreement item.
A maintenance from the goods receipt is useless for scheduling
agreements since the current schedule line situation is generally not
final. Even if all schedule lines are supplied, this does not mean that
no new schedule line might be added. Therefore, for scheduling
agreements,maintenance of final delivery indicator is planned only from
the document item.
Regards,
Edit

How to set cursor at the first line in a table control?

Hi,
I have a customized infotype screen where a table control is being used to input new values.The tab control has 30 lines.Now, the problem is that when the screen is displayed, the cursor always starts at 8th or 4th line.The behaviour is not very consistent.I tried the following statement in the PBO, but no effect.
SET CURSOR FIELD P9417-ZCOUNTRY LINE 1. ( P9417-ZCOUNTRY is the name of the tab control field where i want to set the cursor ).This is the last statement in the PBO.
Can someone please tell me why still I am not able to set the cursor at the first line? I have infact noticed that , in the debugging mode , sometimes the cursor starts at the first line.Please help. Thanks

I have got a new requirement on this now. If the table control does not have any records , then the cursor position should be on the first row.Otherwise, if it already has some records, then the cursor should be at the first empty row.I wrote the code like below.
if sy-ucomm = 'INSERT'.
set cursor 'P9714-ZCOUNTRY' line 1.
else if sy-ucomm eq 'CHANGE'.
describe table itab lines fill.
fill = fill + 1.
set cursor 'P9714-ZCOUNTRY' line fill.
endif.
I am facing a strange problem now.The table control has some 10 rows when you see the screen for the first time.If the number of records already present is less than 10, I am able to position the cursor on the first empty row.But if the number is say 15, then the cursor position goes to eighth or fourth line or sometimes the first line.
Is there any way to display the last few records , ie, if there are 15 records , is there any way to display the last five rows when I see the screen for the first time, rather than showing the first 10 records?How can I position the cursor at the first empty row, when there are more records?
Thanks in advance..good answers will be rewarded.
Mahesh

B2CBasket- Sales Order How to add Vendor partner and new line item of SO

Hi,
I want to add the following BEFORE the sales order creation process starts:
Add a VENDOR partner
Add a new line item to ORDERADM_I
I suspect in BADI CRM_ISA_BASKET_ITEMS and CRM_ISA_BASKET_HEAD. I have user 'HEAD' to add extension fields but cant figure the creation of NEW partners and NEW line item.
regards,
Dave

Thank you for feedback Shantoor,
The CRM_ORDER_MAINTAIN need not be called as this FM is called immediately following almost all of the CRM_ISA_* BADI's.
For clarification I just want to expand on the solution..
In all of these BADI's SAP uses the CT_INPUT_FIELDS parameter. This is where you should enter WHICH fields you have made changes to in the exit. CRM_ORDER_MAINTAIN uses the same parameter.
However the challenge is .. WHAT do you enter in the CT_INPUT_FIELDS. This is where you have to follow a strategy. I yused the following:
1. Looked where the structure was used in programs/class to see how SAP used it
2. Set breakpoints at the call of the BADI. Check what CT_INPUT_FIELDS content is (SAP uses same technique)and try and replicate for your new entries.
I hope this helps those that, like me, battled a bit with the use of these BADI's.

How to overrule a exception on the line items?

Hi,
Any suggestion will be appreciated.
I have a query where I apply a couple exceptions, one to show all the lines with key figure (KF1) not equal to zero and the other one to hide all the lines with KF1 equal to zero. Is there any way, in the 2nd exception in which I need to hide all the lines with KF1 equal to zero yet leave the subtotal (currently equal to zero) in the query? This way I can have a nice summary report with all the zero subtals and for those non-zero subtals I can show all the line details.
Thanks.

Yes, same question, how could you hide the row based on KF values using exception? Is that exception or Condition?
- Danny

How to load long text in BOM line item

Hello Experts
How do i load Long text in BOM Line item using LSMW
Thanks
S
Edited by: Alvaro Tejada Galindo on Jan 31, 2008 5:11 PM

Use Read_text function module.
you need to pass
ID
LANGUAGE
NAME
OBJECT to the function moduel
To find the Text id name language and object these are the following steps. Example: FB02
1. goto FB02, Enter Document number
2. from menuselect Goto>Header-->header Text..... New window will be displayed
3. select the Header Text. here you can see all the text.
4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper.
5. in the Next window you will find Text Name. Text ID, Language. etc...
Regards,
Lalit Mohan Gupta.

How to read long text in Document line item

Hi,
How to read long text in FI Document line item.

Use Read_text function module.
you need to pass
ID
LANGUAGE
NAME
OBJECT to the function moduel
To find the Text id name language and object these are the following steps. Example: FB02
1. goto FB02, Enter Document number
2. from menuselect Goto>Header-->header Text..... New window will be displayed
3. select the Header Text. here you can see all the text.
4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper.
5. in the Next window you will find Text Name. Text ID, Language. etc...
Regards,
Lalit Mohan Gupta.

How to set delv. completed in 2nd line item which created in PO by default

Similar Messages

Maybe you are looking for