How to set in Windows 8.1 the Account Picture from Active Directory

Hello All,
In my company I have uploaded the photos for
each employees in
Active Directory using a powershell script that set the attribute
thumbnailphoto.
This is useful for images in Lync and Outlook,
now I want to use these pictures
to sync with the account picture
in Windows 8.1 but I haven't found anything in internet that helps me
for this.
I hope someone can help me,
Thanks!

Hi,
You can try the steps in following article:
Using Pictures from Active Directory
http://msitpros.com/?p=1036
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites; therefore,
Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the use of any software found on the Internet, and Microsoft cautions you to make sure that you
completely understand the risk before retrieving any software from the Internet.
For your reference, here is the similar thread with different method:
http://social.technet.microsoft.com/Forums/en-US/d6e7b2c3-c343-4900-a01d-24bfb30357b6/is-there-a-solution-to-set-user-account-picture-from-active-directory-thumbnailphoto-attribute-in?forum=w8itproinstall
Hope these would be helpful.
Kate Li
TechNet Community Support

Similar Messages

How can I create a drawing like the one pictured from a photo?

How can I create a drawing like the one pictured from a photo?

OK, you are getting closer. Now, use your result, and place a Layer above that. Use the Pen Tool to create the "pen strokes" basically tracing over your background image. Then, when you have created each Path (or Sub-Path), choose Stroke Path, with probably the Pencil Tool and a Brush size that is small enough.
Not sure which versions of PS these are good for, but here are some plug-ins, that might be helpful.
AKVIS Sketch
EdgeLine
Sketch Effects
Sketch Master
I see that one of my old favorites, Flaming Pear's India Ink is not around any more.
Good luck,
Hunt

How to set permissions on a file for a Mac without active Directory

We don't have our Macs in the Active Directory, we are looking to share an external hard drive to only Macs and not the Windows PC's on the network with out using active directory. I have tested sharing the external hard drive from a PC to everyone and both the PC's and Macs can access this, but we only want the Macs to see this and access this and not everyone. There is no selection for sharing with the computer name in the Share permissions so the only way to do this is to share it to everyone. The Mac accounts are local to the Macs and the PC's are on Active Directory so what i need to do is have a way to share this folder with only Macs and not all the windows PC's. Any solutions, any ideas will help
Thanks

hi
good
go through these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/b9/b4de3f68d48f15e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/be/0de03f41b9eb06e10000000a1550b0/content.htm
thanks
mrutyun

How to modify the Account options in Active directory?

I want to modify some user account options in my active directory through java. Such as "user must change the password on next logon" & "account expires" the user has to change the password by redirecting to the change password page after login.
if account expires or the user must change the password on next logon functionality in the account options is enabled, i couldn't able to bind that user. this is because i am unable to authenticate the same user with the password in the login page. it shows that User is not authenticated & i got data 773 error which means that i want to redirect to the change password page.
During the change password, i cannot able to change the password due to unsuccessfull bind. since the user is not authenticated with the temporary password.
please suggest me solutions.
Thanks in advance.

You've come across the chicken & egg problem.
A user's password has expired and they must change their password at the next logon, however in order to change their password over LDAP, they must perform a successful bind !
Unfortunatey LDAP is not an authentication protocol.
You will have to find some other way for the user to change their password, perhaps by using Kerberos & kpasswd.
If the user's account has expired, there isin't anything a user can do, except to have an adminstrator re-enable the account by changing the account expiration date.

How to set different creation timestamps in the Incidents coming from different countries?

Hello experts, I need that when a user calls to our Service Desk in order to create an incident, the incident gets the creation timestamp of the user country. We support three countries from our service desk, and in order to calculate SLAs and having local factory calendars for each country we need the things this way, is it possible?
Best Regards,
Paul

Hi Paul,
what about the Option of determining one of three SLA Service Products (with assigned Service + Response Profile) via the Country of the Reporter?
Please check the following BadI:
CRM_SLADET_BADI with Method CRM_DETERMINE_PROFILE
Regards,
Robert

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

How to set a variable value on the BPC Data Manager

Hello BPC Experts,
I'm creating a BPC10 NW version demo environment for our prospect customer.
I made a data manager to import BW data into BPC model from BW cube.
I need to import just one month data into BPC from the BW cube that has more than one month data.
When I run the data package manually, I can select a member of the time dimension prompt and I can import specific month data I want.
But, in a case where the program (data manager) runs by JOB monthly,
I can't select a member of the time dimension prompt manually.
So I want to know how to set a variable value to the time dimension prompt from a system date etc. automatically.
Are there any way to set a variable value to the time dimension prompt on the data manager automatically from a system date?
Or, do you have any other solution to import just one month data into BPC from the BW cube that has more than one month data by the data manager running on JOB ?
(without selecting a member of the time dimension prompt of the data package manually)
Thanks in advance,
Keisuke

Hi Gersh
Sorry for my late reply and thanks for your helpful information.
I tried the second way of your information and I could configure it.
And I 'll try first way of your information.
Regards,
Keisuke

How to set Multi User Environment in the weblogic 5.1 and 6.1 server..(Urgently)

Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

Hi. A JDBC connection pool is a set of identical, interchangeable, pre-made
connections, and the controls to make sure only one user uses a particular
connection at any one time. If you want to have different DBMS users, you can
have a separate pool for each DBMS user, which may contain as many or few
connections as you want. Some applications has a pool for the accounting
applications, and another for the sales applications etc. Some do have a
separate pool for john, jane, joe etc, each with one connection. Pools
can be created and destroyed dynamically using the dynamic pool API.
Joe
softstar wrote:
>
Hi all,
I need to know how to set Multi User Environment in the weblogic 5.1
properties file..
Here my question is..:)
1) I have a database with multiple users and having different privileges
for the users.. and i need to use all the privileges when user aceess
the database through weblogic server connectionPool.
2)According to the user privileges i need access the database tables
content and gives the frontEnd(jsp).
3)How to modify dynamically weblogic.properties file in the weblogic
5.1.
If anybody having idea reg. this issues pl...help me..
Thanks in advance
Chandu([email protected],[email protected])

I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.

?? I'm new to using iCloud and couldn't find the answer to: how to set my calendar to use the 24 hour clock. Thanks all.

Thanks, David. i thought i had it set correctly in Preferences in L&R. Being i was wearing my suspenders and belt at the same time i went back to L&R, cleared what was there and re-entered same to include unchecking and rechecking Time Format fgor 24-hour time. It works now. Thanks again.

How to set colors in cells depending the conditions in alvtree

Hi All,
Could you please provide me idea or sample program how to set colors in cells depending the conditions in alvtree.
Thanks,
Suresh

When running vim in a terminal, it will use whatever colour scheme is defined by the terminal. You should have a look at this thread:
http://bbs.archlinux.org/viewtopic.php?id=51818
Also, check the wiki article on Xdefaults.

How to set field to blank if the data is # or unassigned

hi experts,
how to set field to blank if the data is # or unassigned?
thx

Hi
add the following macro to your workbook (template workbook):
Sub SAPBexonrefresh(qstring As String, resultArea As Range)
    For Each c In resultArea
        If LCase(c.Value) = "not assigned" Then c.Value = ""
       Next
End Sub

When using Multicam in CS6 how do I choose which source file the audio comes from?

I've noticed when using the Multi-cam window to create edits, the audio does not change when I select the different video sources. How do I select which source file the audio comes from?

It doesn't make sense why the multicam source sequence only uses one track of audio. Was this by design? The issue with this as in my situation (and because I didn't know this) I recorded all my source videos with the music tracks on the right side which is what I'm using to cut my video with. Not being able to hear this while I'm cutting is really frustrating. There's a reason I separate dialog on the left side and music on the right. There should at a minimum be an option while setting up the multicam to choose more audio options. Even in the audio clip option settings, those don't seem to work when a clip is put into a multicam source sequence.
The other issue is when you bring in the audio after the fact or even before, there's no way to sync timecode with audio to the multicam sequence. When I create the Multicam source sequences in my project bin, I choose sync with timecode, not in points, because the record decks I'm using are all locked with a TC gen during the shoot.
Maybe I'm missing something, but there seems to be either a bug with multicam or a design flaw. Even in the help documentation, it states multiple audio tracks can be brought in with the multicam sequence, but only track one is enabled by default. I've never been able to have the MC sequence bring in more than one track of audio no matter what the audio settings are.

How to list all the Fields for an Active Directory Object

How do I list all the fields that an Active Directory object contains? I know the most common ones, but would like to enumerate through all the fields and obtain the type of fields and their values...

Here is my complete code - I only put snippets so that the post was not too huge...
Option Explicit
Const ADS_SCOPE_SUBTREE = 2
Const ForReading = 1, ForWriting = 2, ForAppending = 8
Dim adoCommand, adoConnection, adoRecordSet
Dim dtmDate, dtmValue
Dim j
Dim lngBias, lngBiasKey, lngHigh, lngLow, lngValue
Dim objADObject, objClass, objDate, objFile, objFSO, objRootDSE, objShell
Dim pathToScript
Dim strAdsPath, strConfig, strDNSDomain, strHex, strItem, strProperty, strValue
Dim strFilter, strQuery
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objShell = CreateObject("Wscript.Shell")
pathToScript = objShell.CurrentDirectory
Set objFile = objFSO.CreateTextFile(pathToScript & "\TestAD.csv")
' Determine Time Zone bias in local registry.
' This bias changes with Daylight Savings Time.
lngBiasKey = objShell.RegRead("HKLM\System\CurrentControlSet\Control\TimeZoneInformation\ActiveTimeBias")
If (UCase(TypeName(lngBiasKey)) = "LONG") Then
lngBias = lngBiasKey
ElseIf (UCase(TypeName(lngBiasKey)) = "VARIANT()") Then
lngBias = 0
For j = 0 To UBound(lngBiasKey)
lngBias = lngBias + (lngBiasKey(j) * 256^j)
Next
End If
' Determine configuration context and DNS domain from RootDSE object.
Set objRootDSE = GetObject("LDAP://RootDSE")
strConfig = objRootDSE.Get("configurationNamingContext")
strDNSDomain = objRootDSE.Get("defaultNamingContext")
Set adoCommand = CreateObject("ADODB.Command")
Set adoConnection = CreateObject("ADODB.Connection")
adoConnection.Provider = "ADsDSOObject"
adoConnection.Open "Active Directory Provider"
adoCommand.ActiveConnection = adoConnection
adoCommand.CommandText = "SELECT * FROM 'LDAP://" & strDNSDomain & "'WHERE objectClass=user'"
adoCommand.Properties("Page Size") = 1000
adoCommand.Properties("Searchscope") = ADS_SCOPE_SUBTREE
Set adoRecordSet = adoCommand.Execute
Set adoRecordSet = adoCommand.Execute
adoRecordSet.MoveFirst
Do Until adoRecordSet.EOF
strAdsPath = adoRecordSet.Fields("ADsPath").Value
' Bind to Active Directory object specified.
Set objADObject = GetObject(strAdsPath)
Set objClass = GetObject(objADObject.Schema)
' Write which object is grabbed from AD
objFile.Write(Replace(strAdsPath, ",", ";;;"))
' Enumerate mandatory object properties.
For Each strProperty In objClass.MandatoryProperties
On Error Resume Next
strValue = objADObject.Get(strProperty)
If (Err.Number = 0) Then
On Error GoTo 0
If (TypeName(strValue) = "String") Or (TypeName(strValue) = "Long") Or (TypeName(strValue) = "Date") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Byte()") Then
strHex = OctetToHexStr(strValue)
objFile.Write("," & strProperty & "|||" & CStr(strHex))
ElseIf (TypeName(strValue) = "Variant()") Then
For Each strItem In strValue
On Error Resume Next
objFile.Write("," & strProperty & "|||" & Replace(CStr(strItem), ",", ";;;"))
If (Err.Number <> 0) Then
On Error GoTo 0
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
On Error GoTo 0
Next
ElseIf (TypeName(strValue) = "Boolean") Then
objFile.Write("," & strProperty & "|||" & CBool(strValue))
Else
objFile.Write("," & strProperty & "|||Type:" & TypeName(strValue))
End If
Else
Err.Clear
sColl = objADObject.GetEx(strProperty)
If (Err.Number = 0) Then
For Each strItem In sColl
objFile.Write("," & strProperty & "|||" & CStr(strItem))
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Next
On Error GoTo 0
Else
Err.Clear
Set objDate = objADObject.Get(strProperty)
If (Err.Number = 0) Then
lngHigh = objDate.HighPart
If (Err.Number = 0) Then
lngLow = objDate.LowPart
If (lngLow < 0) Then
lngHigh = lngHigh + 1
End If
lngValue = (lngHigh * (2 ^ 32)) + lngLow
If (lngValue > 120000000000000000) Then
dtmValue = #1/1/1601# + (lngValue / 600000000 - lngBias) / 1440
On Error Resume Next
dtmDate = CDate(dtmValue)
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||<Never>")
Else
objFile.Write("," & strProperty & "|||" & CStr(dtmDate))
End If
Else
objFile.Write("," & strProperty & "|||" & FormatNumber(lngValue, 0))
End If
Else
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Else
On Error GoTo 0
objFile.Write("," & strProperty)
End If
On Error GoTo 0
End If
End If
Next
' Enumerate optional object properties.
For Each strProperty In objClass.OptionalProperties
On Error Resume Next
strValue = objADObject.Get(strProperty)
If (Err.Number = 0) Then
On Error GoTo 0
If (TypeName(strValue) = "String") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Long") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Date") Then
objFile.Write("," & strProperty & "|||" & Replace(CStr(strValue), ",", ";;;"))
ElseIf (TypeName(strValue) = "Byte()") Then
strHex = OctetToHexStr(strValue)
objFile.Write("," & strProperty & "|||" & CStr(strHex))
ElseIf (TypeName(strValue) = "Variant()") Then
For Each strItem In strValue
On Error Resume Next
objFile.Write("," & strProperty & "|||" & Replace(CStr(strItem), ",", ";;;"))
If (Err.Number <> 0) Then
On Error GoTo 0
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
On Error GoTo 0
Next
ElseIf (TypeName(strValue) = "Boolean") Then
objFile.Write("," & strProperty & "|||" & CBool(strValue))
Else
objFile.Write("," & strProperty & "|||Type:" & TypeName(strValue))
End If
Else
Err.Clear
sColl = objADObject.GetEx(strProperty)
If (Err.Number = 0) Then
For Each strItem In sColl
objFile.Write("," & strProperty & "|||" & CStr(strItem))
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Next
On Error GoTo 0
Else
Err.Clear
Set objDate = objADObject.Get(strProperty)
If (Err.Number = 0) Then
lngHigh = objDate.HighPart
If (Err.Number = 0) Then
lngLow = objDate.LowPart
If (lngLow < 0) Then
lngHigh = lngHigh + 1
End If
lngValue = (lngHigh * (2 ^ 32)) + lngLow
If (lngValue > 120000000000000000) Then
dtmValue = #1/1/1601# + (lngValue / 600000000 - lngBias) / 1440
On Error Resume Next
dtmDate = CDate(dtmValue)
If (Err.Number <> 0) Then
objFile.Write("," & strProperty & "|||<Never>")
Else
objFile.Write("," & strProperty & "|||" & CStr(dtmDate))
End If
Else
objFile.Write("," & strProperty & "|||" & lngValue)
End If
Else
objFile.Write("," & strProperty & "|||Value cannot be displayed")
End If
Else
On Error GoTo 0
objFile.Write("," & strProperty & "||| ")
End If
On Error GoTo 0
End If
End If
Next
objFile.WriteLine("")
adoRecordSet.MoveNext
Loop
objFile.Close
' Function to convert OctetString (Byte Array) to a hex string.
Function OctetToHexStr(arrbytOctet)
Dim k
OctetToHexStr = ""
For k = 1 To Lenb(arrbytOctet)
OctetToHexStr = OctetToHexStr _
& Right("0" & Hex(Ascb(Midb(arrbytOctet, k, 1))), 2)
Next
End Function
I have been able to obtain all the Computer, Contact, Group and OU objects without issue with this code...

How to set authorization to limint plant to craete reservation from IW32

Please advice me how to set authorization to limit plant to create reservation from IW31 or IW32 (Maintenance Order).
I set at M_MRES_WWA (authorization object) but it is not work.

Hi consult.,
I am not very sure about the object you are using, but if it is correct(else serch for the correct object), then make a master role for the T-Codes IW31 and IW32.
then make a drived role from the above made role, and assign the object(above searched object) in the object give the value as that of your plant, and activity as per the requirement.
you can maintain as many derived roles as the no. of plants.
hope it helps.
regards,
YK

How can I get the edited pictures from the thumbnails to full size?

I upgraded to iPhoto 11, the thumbnail photos show my previous edits, but when I click on the photo to make it bigger, it reverts back to the unedited, original picture. How can I get the edited pictures from the thumbnails to full size?

Verify you are using iPhoto11 ver 9.5
if not run the >Software update or check your apps folder and make sure the correct iPhoto is launched, not an older ver.

How to set in Windows 8.1 the Account Picture from Active Directory

Similar Messages

Maybe you are looking for