How to set my own gui status when i use selection-screen
how to set my own gui status when i use selection-screen command
and
how to set the names in the application tool bar when function keys are created
Make sure that you do this in event "AT SELECTION-SCREEN OUTPUT".
Run Txn ABAPDOCU and check 'DEMO_SEL_SCREEN_STATUS' for sample.
Also check out following discussion -
Selection Screen PF-STATUS
Cheers,
Sanjeev
Similar Messages
-
HI ALL,
My requirement is i have to set my own pf-staus.
when i am using the function module RS_SET_SELSCREEN_STATUS it is not showing any pf-stus here.
i am sending code below. nay body can change the code and resend it to me.
selection-screen: begin of block b1.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type zuser_secobjects-appln_user,
if sy-dynnr eq 1000.
call function 'RS_SET_SELSCREEN_STATUS'
exporting
p_status = 'SELK'
tables
p_exclude = exclude
exceptions
others = 1.
endif.
thanks,
maheedhar.hi,
Try with the code below..
Ensure that you have activated the pf-status of the program.
report z_13317_sdn.
selection-screen: begin of block b1.
parameters : p_appln type mara-matnr.
parameters : p_user type marc-werks.
selection-screen: end of block b1.
data: begin of exclude occurs 0,
func(10) type c,
end of exclude.
At selection-screen output.
* set pf-status 'SELK'. <-- Comment this line
if sy-dynnr eq '1000'.
call function 'RS_SET_SELSCREEN_STATUS'
exporting
p_status = 'SELK'
tables
p_exclude = exclude
exceptions
others = 1.
endif.
Regards
Sailaja. -
HOW TO SET MY OWN PF-STATUS-urgent
hi all,
anybody can tell me where i made mistake . after writing this code when i am running this report it is not showing our own pf-staus.
report zmahi4.
selection-screen: begin of block b1.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type zuser_secobjects-appln_user.
selection-screen end of block b1.
data : exclude like rsexfcode occurs 0 with header line.
at selection-screen output.
call function 'RS_SET_SELSCREEN_STATUS'
exporting
p_status = 'SELK'
tables
p_exclude = exclude
exceptions
others = 1.
thanks,
maheedhar.tHIMaheedhar,
Check
http://help.sap.com/saphelp_nw04/helpdata/en/e7/0eb237e29bc368e10000009b38f8cf/content.htm
Regards,
Santosh -
How to set components aligned in left when we use BorderLayout
Hello All,
How to set the components aligned in the left when we use BorderLayout in a panel.Right now,the components are getting aligned in the center.
Any solutions?
Thanks in advance,
VijayBy default a JPanel uses a FlowLayout when created and by default a FlowLayout uses center alignment. Read the FlowLayout API to find out how to use left alignment.
Also each individual component has an alignmentX and alignmentY value which is set to 0.5 (center aligned). Some LayoutManagers will take this value into consideration. Read the Component API for more information.
Also, check out this section from the Swing tutorial on "Using Layout Managers":
http://java.sun.com/docs/books/tutorial/uiswing/layout/using.html -
How to set fetchsize of sql Query when using Database Adapter.
Hi All,
I am using DatabaseAdapter to connect to database and retriving huge amount of data.For improvement in the performance I want to set the "fetchsize" of sql query. I know fetchsize can be preset in Java using Jdbc 2.0 API.Please let me know how to set this value in BPEL when using DBAdapter?
Thanks
ChandraI talked to the developer of the db adapter - and he told me this feature will be available in BPEL PM 10.1.3 (which is supposed to be production later this year, and a public beta soon). If this is an emergency I would recommend going throug Oracle support and have them file an enhancement for 10.1.2.0.2
hth clemens -
How to set a rescue email address when I already have an Apple ID. Actually I forgot my security questions.
You won't be able to add one until you can answer your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use -
How to set change number is prerequisite when change BOM?
Dear SAP Experts,
I have actived EC management in BOM control data in IMG. But when i changed
BOM ( the code CS02 ) with change number blank, system had not given an error message. SO,how to set change number is prerequisite when change BOMs?
Thanks...
Regards,
Joey.Just a guess: Transaction os27 and change the number range to external.
Matthias -
How to set the POV in WebAnalysis when data source is HFM?
Hi Every one..
Could any one tell how to set pov in web analysis when data base is HFM. And hoe to make the report Dynamicall (Current Pov Member like in FR). for this if use Essbase Ican get it it easiliy by using Subtitutional variable but is ti possible fo rHFM.
Thnaks in advance
Raoyeas agree with sanakar,
this field which shankar is talking about must be entry date (if u delta timestamp is date, u will also have to mention this table field name in definition of delta), this means that this field will catch last change to the record, so that it will be delta enabled based on the latest change date. This is very important becuase if u use date like posting date to the delta then back dated posting will not captured in to the delta, as delta for this back date is already been done.
Hope u understand this. -
Does anyone know how to set up the wireless router when y...
does anyone know how to set up the wireless router when you have a Vonage modem and a cable modem? HELP!
You mean u got 2 modems ?
C | EH
linksyshelp.blogspot.com -
Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB
Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB
Cant we even use the dlls in an application?
In order to automate Acrobat, you need to have Acrobat installed. There is
nothing you can do with just the DLLs. As was already stated, Acrobat is
not licensed for use on a server, but regardless of that, it's also
not technically suitable for server use. You need to find a solution
outside of Acrobat to solve your problem.
It also seems that you don't have a good understanding of what is going in
inside a PDF file. PDF is a very complex file format, and based on
your questions
and followup questions, you need to spend a considerable amount of time
getting familiar with the PDF file format to understand how color works in
the PDF context. Reader the PDF spec, while paying special attention to the
section about color. You will find out that if you want to convert the
color space of a "PDF file", you actually need to convert the color space
associated with every single object in your PDF file. That is fairly simple
for vector graphic and text, but when it comes to images, you may have to
convert the image data. Once you have a good understanding of what it is
you need to do within the PDF file, then you can start looking for tools
that allow you to do that. Again, Acrobat and therefore the Acrobat SDK is
not suitable for this task. If you want to stay with Adobe products take a
serious look at the PDF Library, which his licensed through Datalogics (
http://www.datalogics.com/products/pdf/pdflibrary/). As you've mentioned,
there are other, non-Adobe PDF libraries that you can also use, but this is
the Acrobat SDK forum, so I won't discuss any of those 3rd party solutions.
You are wasting your time while looking for a simple solution that does not
exist. -
How to disabled mutli desktop when I using Full Screen?
How to disabled mutli desktop when I using Full Screen?
Some app have a preferences option to do this which like iTerm2
In Lion-Style FullScreen windows, I can't use command + tab to quickly switch between in the apps, I must switch to the app own desktop which is using fullscreen, It's so trouble. I even think this is a flaw in Apple's design.
So, How can I have use this feature in others apps such as Google Chrome, Mail, Safari and so on.
Please Help me! Thanks! Thanks! Thanks!nobody can help me ?
-
Setting the text in ComboBox when nothing is selected
Hi, I want to ask you, whether there is any possibility to set text of a JComboBox, when nothing is selected. I want something like "Choose One" to be shown when no option is selected. Thanks for any help.
Never mind, I got it, you have tu create your own renderer and set the text for null value selected
-
Can I set a default home page when people use my router?
Can I set a default home page when people use my router?
Can I set it to my web site for example so that people have to go there when they connect?
Thanks,
PaulHello EireReality. Welcome to the Apple Discussions!
Can I set a default home page when people use my router?
No, at least not that I'm aware of. Setting a "default home page" is typical feature of a web browser, not an Internet router. -
Wrong date format when using selection screen query
Hi all,
I have a problem in a report when usign the selection screen of the query.
the system has been upgraded recently from a 3.5 to 7.0. when a query is run in the bex web the user can put in the selection date needer to run the query.
currently if u select a month using the selection screen next to the input form, the month will show up in the input field
as 006 09 (006space09) instead of 06.2009 for the selection of june.
does anyone know how to fix this? it was working good using the 3.5 version of the bex web.
Any help apriciatedUsing the list cube transaction and using the selection sceen and selecting the month it does put the right selection in the input field. ive also just tested it using de bx excel plugin and using the selection screen the correct value is set in the input field. so i think it more of a bex we b problem but i dont know where to start the search for the solution.
-
How can I control the Product Category in the Pre-select screen
Dear ,my expert :
I work in ROS scenario . In my case ,the supplier can select Product Category A, Product Category B,and Product Category C when they filled the data in the registration scren . And the purchaser A just is responsibility for the Product Category A ,and the purchaser B ,C are the same situation .
So ,my question is :
1,How can I control the Product Category in the Pre-select screen? I mean that the Purchaser A can just select the Product Category A in the Pre-select screen .
2,You know the supplier select two category is one BP in the system ,So if the purchaser A accepe the supplier ,the purchaser B will find the status is "accepted ",So the purchaser B will be confused about it .
SO ,in my case ,any one has the suggestions ,any link welcome .
Bestregards
alexHi Alex,
As per standard SRM solution, this is not supported. Purchasers who accept new suppliers, accept them on the whole and not for any specific product category. There is no such thing as Purchaser being responsible for specific prod category in ROS.
What you could do however is to build a custom workflow to achieve it. You could have category approvers after the purchaser has accepted the supplier. Based on the category provided by the supplier in the reg form, you could route these suppliers to appropriate category approvers.
Regards,
Nikhil
Maybe you are looking for
-
Problem with TrayIcon and mouse events
Hi, I am trying to listen for a mouseEntered event on a TrayIcon. This is the code i am using: final TrayIcon icon = new TrayIcon(getImage(), "tray icon"); final SystemTray tray = SystemTray.getSystemTray(); try { tray.add(icon); }catch (AWTExcept
-
No track/artist names or artwork after transfering from CD-R
Hi, when I first got my Ipod I was using a PC that I no longer have access to. I purchased and downloaded a number of albums and songs to my Itunes account. I have since set up Itunes on my own PC and wished to retrieve the songs I had previously dow
-
I felt this should be in the FCPX discussion, not the Compressor discussion...reason below: I'm on FCPX 10.0.3 and Compressor 4. I have a 4:3 project I want to export as DV/NTSC using Compressor (Leightronix Nexus does not accept ProRes). Anyway, if
-
Lose full screen when streaming movies
Lately when streaming netflix my screen minimizes on it's own.If I click on full screen it comes right back.The intervals are random.It just started doing this and I don't think I added anything to my computer that caused this.
-
Af:tree with master-detail doesnt work
Hi, I created master-detail(used updateable VO's) and test it from the application module and everything worked as expected. Now I try to show all master and detail data in af:tree component. At the runtime I can see only master data, but there's no