HOw to set processing sequence of file in File adaptor?

Hi @ ,
I am using file adaptor where i need to ensure the files are processed in a particular sequence like a,b,c,d and if c is received before a and b it should not be processed unless a and b are processed
Please help how to do this .
Regards,

Hi,
you just need to set:
Processing Sequence (for transport protocol File System (NFS))
(it only works with NFS)
and set it: By Date
reference:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
is that what you're looking for?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Similar Messages

How to set up a basic file sharing server for my small architectural business?

I have no idea if I have posted in the correct area as this is my first forum post within the apple support community!
I have been using a 21.5" imac running 10.6.8 for the past 5 years to run my small home based architectural design business. I have been using the internal hard drive & backing up the necessary data to a simple usb external hard drive. I am now looking to firstly purchase a new imac 27" retina and purchase new autocad lt 2015 for mac software. I am looking to have another imac (my old mac) running in conjunction with the new mac. I want both macs to be able to access the same data and am slightly unsure what is the best way to achieve this.....As my old mac is currently only running snow leopard and an old version of autocad for mac 2011 it wont run on any more recent OS. Essentially i believe I have 2 main options with this.... (1) I Accept that I have to purchase 2 no. autocad lt 2015 licences @ a cost of £2300. Or option (2), I only run autocad on the new mac as this will be the primary station and the old mac used for primarily for admin & accounts. I have also recently discovered that it is possible to rent autocad licences for £300p/a which may also be another option (3)!
I previously had a problem where my hard drive failed on my mac & lost all data on the internal hard drive, luckily I had been backing up all data regularly to my external hard drive and now loss occurred! Obviously with any new system I want to ensure that my data is safe!
I currently utilise about 250GB of data for business operations but this will obviously grow with time.
In the future I would like to have the option of potentially being able to access the network data remotely via macbook pro whilst abroad although at this stage this really isnt my primary objective. Although I believe I could achieve this through apple remote desktop.
I suppose I should provide some information with regard to the required speed of the system...I regularly open 50-100 photos at the same time totalling around 250-500MB. I would like the system to be able to handle this fairly easily.
I have been trawling through forums and to be honest they are totally confusing me. I have also spent time on the phone to the apple business team and have also discussed my objectives with a member of the apple team in store.
There have been various options advised to me and I really do not know which is the most appropriate route forward.
1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
4 - Using a RAID based server and linking the 2 no. macs.
Sorry to ramble but any advice really would be greatly received!

Hi sblemings,
Welcome to the community.
I think with your scenario you should ask yourself, how complicated do you want the setup to be and how much time would you have to be able to resolve an issue should one occur with this setup.
All the options that have been advised would work but they come with complexity and therefore time.
1 - Using a mac mini as the file server and linking the 2 mac devices to this and backing up the mac mini to an external hard drive to ensure no loss of data.
2 - Using a time capsule as a file server and linking the 2 mac devices to this and backing up the TC to an external hard drive to ensure no loss of data.
3 - Using the new mac hard drive and linking the 2 macs via thunderbolt (old mac does not have thunderbolt and so I guess I would need another new mac?!) and then backing up the data to a time capsule.
4 - Using a RAID based server and linking the 2 no. macs.
Sorry to ramble but any advice really would be greatly received!
option 1
Would be a way to achieve what you want, it would centralise your files and you would only need to backup your file server (as long as all the files you wanted backed up were on it). This could be achieved either using the client and sharing various folders or using Server which would give you more options than you would possibly need.
option 2
This is exactly like option 1 except that you wouldn't have to administer another mac however you may limit any future growth.
option 3
This option I probably wouldn't pick, you could achieve this with firewire and use a firewire to thunderbolt adapter (saves you having to buy a new iMac)
option 4
This option would, depending on your RAID level, give you disk redundancy but remember you would still need to back this up, as RAID is NOT a backup solution.
I would also ask is there a pressing need to keep the old iMac in service and complicating things by having a server / NAS? Could you not just transfer all your information over to this and continue with the one backup? I would say that doing it this was would be the simplest way of achieving what you want from what I can take from your question.
As for remotely accessing your data, if you have the right hardware the way to achieve this would be to use a VPN and connect back to your data. However a potentially easier way for you ,would be to use a service like logmein or teamviewer to connect back.
Hope this helps, and by all means any questions please ask.
Dan
How to set up a basic file sharing server for my small architectural business?

How to Set JFilechooser to show file with the same extension in the filetyp

How to Set JFilechooser to show file with the same extension in the filetypes??
help

I also don't understand, but if you mean how to display only files with a certain extension in your JFileChooser then you should have a look at the JFileChooser API:
http://java.sun.com/j2se/1.5.0/docs/api/javax/swing/JFileChooser.html
The introduction shows an example of how to do that.

How do you process a RAW file ARW (from a Sony a7R camera) in Elements 11?

How do you process a RAW file (ARW) from Sony a7R camera in Elements 11? Elements 11 does not seem to accept a ARW file.

Doug2014
For editing of the Sony a7R raw image in Photoshop Elements Camera Raw need the following ingredients
a. The Camera Raw version must support the camera that you are using, that is, the Sony a7R. Support for that camera did not come until Camera Raw version 8.3.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
b. The version of Camera Raw must be supported by the version of Photoshop Elements. Camera Raw 8.3 is not supported until Photoshop Elements 12.
The choices would appear to be:
a. Switch to Photoshop Elements 12
or
b. Use the DNG Converter to convert the Raw image to .dng
If all you have is Premiere Elements 11 which I do not think is the case, the Camera Raw plug-in allows you only to import the raw or dng image into the project for inclusion there - no Camera Raw dialog editing. But the same Camera Raw version - Camera Support - Premiere Elements version support still exists.
Please review.
Thanks.
ATR

How to set DEBUG severity for File adapter in J2SE AE

Hi,
Can anyone help me in setting the severity level to DEBUG for file adapter?
I have tried to set in logging.properties file as given below,
formatter[Trace]         = TraceFormatter
formatter[Trace].pattern =%24d [%t] %-6s %l - %m
log[Trace] = FileLog
log[Trace].pattern     = swb_%g.log
log[Trace].limit     = 2000000
log[Trace].cnt          = 5
log[Trace].formatter     = formatter[Trace]
com.sap.aii.messaging.adapter.severity = DEBUG
logging components
#com.sap.aii.axis.logs = +log[Trace]
#com.sap.aii.axis.severity = DEBUG
#org.apache.axis.logs = +log[Trace]
#org.apache.axis.severity = DEBUG
Please correct me if I have did anything wrong and sugest me hot to set the DEBUG level as soon as possible.
Best Regards,
Soorya

Hi Sejoon,
when we changed the host of XI server in one of our projects one of the things we had to change was the exchange profile entries
http://server:port/exchangeProfile/index.html
to see how your adapter engine is configured
http://server:port/sld
SLD -> Content Maintenance
then
Subset: landscape description
Class: XI Adapter Framework
buth check the exchange profile entries first
Regards,
michal

Process sequence in File - XI/BPM - File scenario

how does QOS works within BPM, Since some processes may take time to process for whatever reasons ( due to some delays ).
I'm planning to develop a scenario like this.
I have 7 files which have same Batch number as part of File name which Iam planning to use as Correlation in BPM.
File 1 starts BPM.
Within BPM, all other 6 files will be received and sent out.
Then File 1 should be sent
Then I need to make SOAP call to trigger event on the 3rd party application.
My question is
If I use EOIO as QOS on the Sender file adapters, how does the process works in the following situations.
File 1 - Batch 1 arrives - BPM process 1 starts
File2 - batch 1 arrives - BPM process receivs and sends message
BPM here still waiting to receive files
File 1 - batch 2 arrives - BPM Process 2 starts
All other files . Since all files arrived, all files will be be received and sent out in BPM.
Now question is
BPM Process 1 is still waiting for other files to arrive and BPM process 2 is completed ( Are files will be waiting in Queue here ???)
Does writing of the files on the receiver side will be postponed until queue receives the files from BPM process 1 since I sued QOS as EOIO for all files ?
Would someone please clarify this please.

Hi,
In this blog, I have used Business <b>Service</b> created in the integration directory.. This is an abstract . So I need to specify , the Sender and Receiver Interfaces explicitly in the business service. and it doesnot have any entry in the SLD.
But if you create the Business System in the SLD and if you import that into the Integration Directory-->Assign this into your configurations scenario, then this step is not required.
Regd. Importing Integration Process- BPM is kind of Abstract Service.. i.e BPM is acting as a Receiver Service and Sender service both..
i,e Source to BPM ( here BPM is a Receiver)
BPM to Target( here BPM is a Sender Service)
Hope this clarifies..
Regards,
Moorthy

How to set up PopProxy* log file size ?

Dear All,
Does anybody know how to set up MMP PopProxy* log file size and rollovertime ?
./imsimta version
Sun Java(tm) System Messaging Server 7.0-3.01 64bit (built Dec 9 2008)
libimta.so 7.0-3.01 64bit (built 09:24:13, Dec 9 2008)
Steve

SteveHibox wrote:
Does anybody know how to set up MMP PopProxy* log file size and rollovertime ?Details on these settings are available here:
http://wikis.sun.com/display/CommSuite6U1/Communications+Suite+6+Update+1+What%27s+New#CommunicationsSuite6Update1What%27sNew-MMPLogging
Regards,
Shane.

How to set/get the archive file attribute?

I am programing a (freeware!) ftp client and need to know, how to set/get the archive attribute of a local file. I was searching through whole the i-net - nothing at all!
please help me!!

Hi,
Since not all operating systems support the archive attribute, this ain't included in the JDK.
If you're using Microsoft Foundation Classes for Java, then you can use File.getAttributes(String path) and check whether the result equals FileAttribute.ARCHIVE.
For setting the attribute, you can use
File.setAttributes(String path, FileAttribute.ARCHIVE)
Of course this is all Microsoft-specific stuff.
Hope this helps,
Kurt.

How to set path to jar file (classes)?

hi,
i have a java program which uses a jar file (lots of classes). so, i run them all in eclipse but i want to run it on a command line, like through cmd from run.
the classes are found in a different folder, and the code snippet is found in another folder. so where or how to set the path to the jar file?

Write
c:/java -?
you can use the -cp pption to use your jar file or a folder with classes.
java -cp jar1.jar myclass.class

How to set two different welcome-file to different servlets in web.xml

Hi friends,
Can some one help with web.xml file
I have to different servlets in applications.
I want to set two different welcome files for my two different
servlets in web.xml
Please, can some one give me sample code to achieve this.
Here web.xml code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app PUBLIC
"-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
     <servlet>
          <servlet-name>reports</servlet-name>
          <servlet-class>com.caremark.ivr.servlet.IvrReportsServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>reports</servlet-name>
          <url-pattern>/reports</url-pattern>
     </servlet-mapping>
     <session-config>
          <session-timeout>30</session-timeout>
     </session-config>
     <welcome-file-list>
          <welcome-file>reportsindex.jsp</welcome-file>
     </welcome-file-list>
     <servlet>
          <servlet-name>calldetails</servlet-name>
          <servlet-class>com.caremark.ivr.servlet.IvrCallDetailsServlet</servlet-class>
     </servlet>
     <servlet-mapping>
          <servlet-name>calldetails</servlet-name>
          <url-pattern>/calldetails</url-pattern>
     </servlet-mapping>
<welcome-file-list>
          <welcome-file>calldetailsindex.jsp</welcome-file>
     </welcome-file-list>
</web-app>
I need this fix immediately. Your help will be really appreciated. Thanks in advance.

First of all, my understanding is that you need to have a Servlet 2.4 complaint server to do this...Given that, you're supposed to be able to simply specify the Name of the servlet as the welcome-file to get it to work. For example:
Your servlet section:
<servlet>
<servlet-name>Controller</servlet-name>
<servlet-class>com.company.ControllerServlet</servlet-class>
</servlet>Now you would add the following to your welcome file list:
<welcome-file-list>
<welcome-file>Controller</welcome-file>
</welcome-file-list>Note that you use the servlet-name value from the servlet definition, NOT the url-mapping from the servlet-mapping section.
Please note that I cannot verify this as I am running a 2.3 server at home. When I get to work Friday I can test on a 2.4 machine. However this shouldn't take you more than a minute to test.
Note that I did try this on the 2.3 compliant server and it did NOT work (as I expected)...
HTH.

How to set permissions to a file ?

hi,
i have a requirement to set file permissions and also to get the current permission mode on the file. PLease let me know if there are any inbuilt functions to set permissions to a file. (eg: CHMOD in unix) .
canRead() and canWrite() are only to get the permission. what about methods to set the permission for a file ? If there are no methods whats the possible way...
Thanks,
Sarat

May be I am not sure but try this
Runtime.getRuntime().exec("EXecute chmod command here");

How to set encoding of the file when using UTL_FILE

Hi,
We are using HRMS 11i applications. 11.5.10.2 version. Two languages are installed in our instance. American English and Canadian French.
We have requirement to send employee details in a text file to third party vendor. We are using UTL_FILE to write details to the text file from PL/SQL procedure.
The generated output file has encoding as "UTF8". Where as vendor is not able to process this file. They required encoding as "ANSI".
How can we change the encoding to "ANSI" ?
Values of character set parametrs are as follows.
NLS_CHARACTERSET UTF8
NLS_NCHAR_CHARACTERSET UTF8
Any inputs are highly appreciated.
Regards,
Veerababu.

You should take a look at the UTL_FILE documentation. As far as I know standard UTL_FILE calls write to the file system in the database character set. There are mirrored calls, but those write to the file system in UTF8.
You may want to look at the UTL_RAW.CONVERT function. You may be able to use that in conjunction with the UTL_FILE.PUT_RAW API to write out data in the correct character set. To be honest, I've never tried this approach.
Edited by: Centinul on Sep 21, 2012 8:16 AM

How to set and reset a file as readonly and hidden

Hi all
I am trying to produce the explorer as it is in windows. I am using Jtable instead of JTree. I want to show properties for each and every folder or file. While showing properies i want the user to set the file as readonly and sometime he doesn't want to. How to do it?
I have used the option setReadOnly in the FIle class for setting but i dont know how to reset to not read only.
Can someone produce code for Jtable explorer with all features.
Lakshmi

Search for exporting in the help file
Not all for PProCC, but The PPro/Encore tutorial list in message #3 http://forums.adobe.com/message/2276578 may also help, with more help in message #5
PS - rendering is the process of creating temporary files to aid in timeline playback, while exporting creates new files

HOW CAN YOU PROCESS AN AUDIO FILE IN LABVIEW?I NEED TO TIME-PITCH SCALE IT

hello guys.
can you insert an audio file into labview for further processing?i need to get an audio file (stored on my computer) and further process it for time-pitch scale.does anybody know how?any pointers will much be appreciated.
regards
alex

hi there
open the "Graphics & Sound" palette from the functions menu to use vis for reading/Writing wavefiles, search the examples shipped with LV for first steps. use the VIs in the "Analyze" functions palette to modify the data.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

How to set up a csf file in Bridge from my printer-supplied icc?

We are a small magazine sending PDF files to a printer out of state (printing on a heat-set web press with a newish stocatto system). We are PC using CS2.
We have gotten inconsistent color from our printer using Adobe recommended color settings in CS2, and so our printer has just supplied us with their icc profile. I have loaded it in all apps but do not know how to load it into Bridge so that Bridge says all is synchronized. I have asked our printer for a csf file but they do not have one or know what I am talking about.
Do you have any suggestions? Can I make my own csf file using the new icc profile?

Dorinda,
the best place for defining color setting files is IMO
Photoshop by Edit > Color Settings.
Examples:
RGB: sRGB or AdobeRGB(1998) (may be called aRGB).
CMYK: SWOP or ISOCoated or the profile as supplied by
your printer.
Grayscale: Dot Gain 20% (for Coated) or for instance
Black Ink ISO Coated, which is derived from ISOCoated.
Never a 'Gamma'.
Spot: widely uncertain, use Dot Gain 20% or Black Ink
ISO Coated.
The settings can be saved in Photoshop by an understan-
dable filename, for instance by:
aRGB-ISO-20-20.csf
In Bridge simply load this file for synchronisation,
especially if local settings in Photoshop, InDesign or
Illustrator were changed.
For Acrobat I would rely more on actual local settings.
For instance, a document's output rendering intent can
override working spaces.
Best regards --Gernot Hoffmann

HOw to set processing sequence of file in File adaptor?

Similar Messages

Maybe you are looking for