How to set required for group of condition type in the same condition class

Hello,
we have a group of condition type with the same condition class B, the last one have been set, and all of others will be inactive.
but we don't set any required for all the condition types in pricing control, so if user don't set any of them, the sales order or billing is still saved. that is a risk.How can i fix it? Thanks.
Sophie

Hello,
incompletion log is not available in invoices.
You have different options:
- activate a validation in FI when the Billing document is released into accounting, so that te release into accounting is not allowed if the invoice amount is zero;
- define a subtotal in the pricing procedure as sum of the pricing conditions of your group, then develop a custom routine to be assigned in the formula "CalType" (field T683S-KOFRM) where an error should be raised if the amount of the subtotal is zero (use as an example formula 48);
Best regards,
Andrea

Similar Messages

Struggling how to set up 2 daq assist on labview in the same VI

hi all,
hope someone can help me out
I am currently using the scxi 2345 with some SCC FT01 feed through modules, these are just to record some voltages from some transducers.
What I am struggling with is setting up 2 daq assist on a single VI, it is coming back with a error stating specified resouce is reserved and then a window saying learn more about automatic handling. How would I also have these 2 values logged on the same graph or chart?
Anyone any ideas how to set these up.
I ideally want to have 3 daq assist in the same Vi but not sure if this is possible. It would be 1 for thermocouple input and 2 for voltage as stated above
many thanks
shane dover

Hi Shane and Dennis,
I've been working my way around the same type of problems, and I am
currently re-writing everything to use on Asst. per board on my PXI
chassis, so that no resources become reserved.
As a result, I have to separate the signals on the output dynamic data
in order to do different post processing. So I have been toying
with staying with dynamic data, inputting dyn. data into an array, and
inputing it into a cluster. It seems that each has advantages and
drawbacks, but arrays seem to be the easiest with which to work when
splitting signals coming from a DAQmx Asst. and funneling some of the
signals into a post-processing sub-VI. The drawback to this is
that time stamps in the Dyn. Data are lost if you want to record the
data and the time of the reading.
Question: Is there an easy way to pipe Dynamic Data into a
calculation subVI? Is it workable after it's been split from
other streams?
Thanks,
Brad

How to set two Star's TSP100 receipt printer on the same mac ?

Hello
For my restaurant I use a FileMaker homemade software that can use two ticket printers of the same type (Star's TSP100 receipt printer).
One is set as "Kitchen" in the underground kitchen and the other as "Desk" in the main floor.
Software must prints orders for kitchen on the correct printer and other receipts on the other printer. It uses Applescripts command to switch printer before printing.
Sometimes the two printers are switched and reports are printed on the bad printers.
Software is working correctly, orders for kitchen are always printed on the same printer and other receipts are also printed on the other printer. When printers switch, the kitchen receive receipts for desk and orders for kitchen are printed on the desk printer.
How can I fix the two printers to be sure that every orders and receipt are printed on the correct printer.
Thanks for your help

Let me first say I have never tried to do that...
I believe this is completely about the driver. 1 driver can only correctly identify one printer in print & scan prefs. I think you need separate drivers and separate ways to identify each printer. Like - another copy of the driver with different named file(s); and a printer utility that allows you to change printer name.
For Epsons the USB setup includes the Serial number - which allows the driver to differentiate. Does your driver do that? Maybe there is an alternate driver you can use for one of the printers? Check out the free Gutenprint driver. Search for gutenprint mac.

Please can someone tell me how to set up FaceTime between 3 devices all using the same apple ID ( 2 iPads and a iPhone)????, Please can someone tell me how to set up FaceTime between 3 devices all using the same apple ID ( 2 iPads and a iPhone)????

I am trying to set up FaceTime on all my apple devices so I can FaceTime each device but all 3 devices are using the same apple Id and I have no idea how to sort this???

Facetime only works with two devices at a time. You can have the same Apple ID, but the two devices can't have the same email address. Get a new gmail account. Normally you use wifi for connection, however, with iOS 6 and an iPad 3 you can use cellular.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
 Cheers, Tom

How to run save for web and contact sheets at the same time

Hi
my question is simple and a means to save time-
Lets suppose I have 3 camera images and I want to run either save for web applications on 2 cameras at the same time, how/can i do that to save time or lets say contact sheet action on 1 and save for web on the other to save time or photoshop files and this runs in the background?
would really help save me time.

Even if you could run the three process in the background at the same time I do not think the duration of the total execution time would be any shorter. You would still be executing the same number of processor instruction reading and writing the same number of files. If the whole processor was constrained by the processing power running them cuncurrenly may increase the processing time because of contention for the processor. If the processes are IO bound that will not change a overlaping the processes may cause more hard disk seaking because of contention of the hard disk arm.

How to configure queues for sending IDOCs from XI in the same order receive

Hi,
We are collecting IDOCs and sending them to XI using a background job (RSEOUT00) from R/3. When XI receiving these collected IDOCs, it's forwarding the received IDOCs into different queues for processing them and sending them to receiver system. Some times some queues are taking longer time to process the received IDOC and in the mean time the latest IDOC received getting processed and sent to receiver system. When the information related to this old IDOC is sent out to receiver system after the latest IDOC information is sent to due to delay in Queue processing, we are getting errors in the receiver system. Can somebody explain the steps to configure queues to process the IDOCs in the same order they received from R/3.

Hi,
Why not tunnel all the IDOCs to one queue for processing ?
Cheers
Colin.

How to set up two POP e-mail accounts using the same POP and SMTP servers

I have an e-mail address based on a domain I purchased which is based on my company name. Now retired, I have purchased a new domain with a simpler, personalised name. My original e-mail account uses the incoming (POP3) and outgoing (SMTP) mail servers operated by my ISP; mail.btinternet.com.
I have set up a new account on my PC in Microsoft Outlook, and have successfully sent and received emails using the new e-mail address taken from my new domain name.
I have now tried to mirror this on my iPhone, but every time I enter all the relevant data for the new e-mail address, user name, password, mail servers etc., and then press 'save', I get a pop-up which says: "xxxx" is Already Added This POP account has already been added to your iPhone. ("xxxx" is the name given to my original e-mail account). Nowhere have I input "xxxx" in the course of setting up the new account.
I need both accounts operational during an extended switch-over period as I alert everyone to the e-mail change over. Can anyone suggest a solution to this problem?

What targeting the Mail.app preference file, do the following:
Quit the Mail.app first and using the Finder, go to Home > Library > Mail. Copy the Mail folder and place the copy on the Desktop for backup purposes.
Using the Finder, go to Home > Library > Preferences > com.apple.mail.plist. Move the com.apple.mail.plist file to the Desktop.
Note: Moving the com.apple.mail.plist file out of the Preferences folder will require re-entering all email account information when re-launching Mail.
The only exception to this is if you have a .Mac account which will be recreated automatically and/or if you created an email account as part of the computer setup assistant when first turning on the computer when new.
Launch Mail and decline any prompt to import mailboxes. After re-entering all email account information, the Mail.app should rediscover the existing account named folders and mailbox files at Home > Library > Mail.
After confirming all mailboxes were successfully rediscovered, you can delete the copy of the Mail folder and old com.apple.mail.plist file from the Desktop.
Test if this resolves the problem.

How to set a different smtp in and out on the same server

Hello,
I got an xserve on 10.5.6 and the ethernet ports are connected to two differents networks. One is on the local network (192.168.0.5) and the other on a wan. The lan is on ADSL box that is also the router. I would like to receive my email from the adsl box (it work like this actualy - smtp in) but sent the mails from my user with the wan (smtp out). I did'nt find any setting on the admin server graphic interface and Apple confirms that it is not possible without modifing files with the terminal. (they did'nt give the solution:()
Is anyone can help me to make this configuration work.
Thanks in advance.

Short answer: you can't - at least not directly.
What you're trying to do breaks the fundamental rules of IP routing - specifically you can only have one default route that's used for all non-local traffic. That route will either point out our ADSL link or your second WAN link. You cannot route by port or protocol.
Your best bet is to use an SMTP relay where you tell your server to relay all outgoing mail through an intermediate server (rather than directly to the destination domain). Then you can setup a static route to that relay over the second WAN link to override the default route.

How to Modify Search for Leads using Date types in the Assgmnt Block Date

Hello Experts,
I have a requirement to modify the search for Leads using Dates in the Assignment Block Dates and using the Posting Date of the transaction.
Any ideas?
Thank you in advance,
Justin

If you look at the grants, you'll see that there are over 170 objects from the FLOWS_030000 granted to PUBLIC:
SQL> select count(*) from dba_tab_privs where owner= 'FLOWS_030000' and grantee = 'PUBLIC';
173
If we were go grant these privileges to a role, called APEX_APP_RU, and grant this role to APEX_PUBLIC_USER and any schemas an application is linked to (Workspace to Schema), would that be a workable solution?
The only problem I see right off hand that this might not work is that PUBLIC has synonyms created for the FLOWS_030000 objects. If we revoke the underlying privileges, because of the synonyms, this might not work.
SQL> select COUNT(*) from dba_synonyms where table_owner = 'FLOWS_030000' and owner = 'PUBLIC';
176
Does anyone else have any ideas?

HT2731 How do I apply for a separate iTunes account on the same computer?

I have an iPhone and my brother has an iPod touch. We only have one computer at our house ao we have been sharing my account. I get all of his music he purchases whether I want it or not. Is there some way we can both have our own personal separate accounts?

Hi...
Create a new user account on your computer.
http://support.microsoft.com/kb/279783
That way you can login to your account and he can login to his.

What is setting required for Price Contol do the optional entery in master.

Hi SAP EXPERT,
What is setting required for Price Contol do the optional entery in Material master ?
Regards
Mahendra
Edited by: MAHENDRA NAVALE on Aug 27, 2011 2:23 PM

HI
In general in the material master record you can, hide display or optional for a field, but there are certain feilds should be mandatory for material creation,like base unit of measure,material description,and price contro,l valuation price,valuation class,without this you cannot create a purchase order.
If you dont want to the price control means go for mateial type non valuated material NLAG. because the price control is mainly linked with the material valuation. based on the the price control the price difference will post either sock account or price difference account.
Goto>MM>LOGISTICS GENERAL>MATERIAL MASTER>FEILD SELECTION >ASSIGN FEILD SELECTION TO FEILD SELECTIN GROUPS(OMSR) >CHECK YOUR FEILD REFERENCE FOR PRICE CONTROL (MBEW-VPRSV) FEILD REFERNCE GROUP IS 32* > AND GOTO MAINTAIN FEILD REFERENCE FOR DATA SCREENS (OMS9) >ENTER YOUR FEILD SELECTIN GROUP 32 (PRICE CONTROL )AND CHOOSE MM01 MAKE IT FROM REQUIRED TO OPTIONAL.
Thanks
Edited by: Nijamudeen**MM on Aug 29, 2011 10:19 AM

To write&activate new Requirement for customr discount condition type k007

Hi Guru's,
how to write and activate new Requirement for customer discount condition type K007 in VOFM.
could please guide me step by step process or if you have any programming language related to this please provide me that would be helpfull to me...
please let me know if my question is not clear..
Thanks in advance and will give full points...
Srinivas.

Hi S,
u can use options condition value, condition based values for this requirement.
1.all Z requirements starts from 9xx onwards ,
2.u need to use Internal tables KOMP in that requirements based on the given conditions.
3. Dont active all , select only new requirement->Edit->Active.
ref any standard requirement for sample codes.
regards
Prabhu

Skill sets required for interfacing with third party

Hi we are currently using LSO 603 , and we are scrom compliant , we want to build an interface with third party , where we have all our manufacturing courses stored . so client wanted to know the skills sets required for building an interface. please advise
Thanks!

Skills required.....
ABAP including BAPI's/Function Modules
understanding of Performance management and how it hangs together.
Happy New Year.
Jules.

How to set optional for table structure in functiona module

hi experts,
as i have small doubt regarding
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure ....
reagrds prabhanjan

Ignoring the TABLES/CHANGING/EXPORTING argument...
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure
Why not? There's no issue with marking a TABLES interface parameter with 'Optional' and publishing the function module or function group as a web service...

How to set value for radio button in sap crm survey suite

Hi ,
I created a survey in CRM Service, in which I added a question with answer as '10 Selection Button Group ('radio button'). And answer has 11 answer options (which means 11 radio buttions). Now when we test the survey, the value for the radio buttons is appearing like 'id_0050569b03091ee480a29d8ee61e953c'. But i want to set a specific value for each radion button (from 1 to 11). So, how to set value for radio button in sap crm survey suite???.
Thanks & Regards,
Seshu

Hi,
I found solution myself. Click on Goto -> Editing Mode -> Expert Mode. Now you can set value for radio button.
Regards,
Seshu

How to set required for group of condition type in the same condition class

Similar Messages

Maybe you are looking for