How to set screen resolution on Apple TV Gen2

This is my first bad out of the box experience with an Apple product. I got my brand new Apple TV Gen 2 and hooked it up to our Sony Receiver/TV.
Plugged everything in. Turned it on and I got the screen but am not able to change resolution. With the current resolution I can not see all the menus and the display does not fit on the 40" display.
Tried unplugging.
Tried doing a reset.
Tried holding the Menu & Down arrow
Tried looking through the menus, such as Settings, Video & Audio but can't find anything on setting screen resolution
Tried searching this forum for instructions for changing resolution
Much appreciation in advance for any tips or magic tricks on setting screen resolution.

i also have this problem. i had a long discussion with apple support and the result was that apple tv 2 is not build for connecting it to a receiver but only to a up-to-date flat TV. i don´t know how i managed it to use the 720p resolution but as i had it i set the auto power to off and let it switched on all the time.
after the update to 4.2.1 it had no chance to get it to 720p. it is locked to 1024x768 which is not the resolution i want to watch HD movies.
but my setup is not a normal one. i have a onkyo AV receiver which is sending the HDMI signal over a HDMI splitter to an LCD screen and a HD beamer. the LCD screen is an old one which has no HDMI input, i use a HDMI to analog-component converter for this. the HDMI output of the onkyo is connected to a wireless HDMI system from marmitek.
so its not so the ideal setting for apple tv. i hope that everything works fine if i have a new flat TV with a normal HDMI input.

Similar Messages

How to set screen resolution in BDC

hi pls give info regarding how to set resolution for screen
thank you
Ravi

hi,
For screen resolution use ctu_params, with default size
Data : f_option type ctu_params,
f_option-updmode = 'S'.
f_option-defsize = 'X'.
f_option-dismode = 'N'.
call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
CALL TRANSACTION tcode... OPTIONS FROM opt
... OPTIONS FROM opt
Effect
Allows you to control processing using the values of the componetns of the structure opt, which must have the ABAP Dictionary type CTU_PARAMS. The components have the following meanings:
DISMODE
Display mode (like the MODE addition)
UPDMODE
Update mode (like the UPDATE addition)
CATTMODE
CATT mode (controls a CATT)
CATT mode can have the following values:
' ' No CATT active
'N' CATT without single-screen control
'A' CATT with single-screen control
DEFSIZE
Use default window size
RACOMMIT
Do not end transaction at COMMIT WORK
NOBINPT
No batch input mode (that is, SY-BINPT = SPACE)
NOBIEND
No batch input mode after the end of BDC data.
The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
' ' No
If you do not use the OPTIONS FROM addition, the following control parameter settings apply:
DISMODE
From addition MODE
UPDMODE
From addition UPDATE
CATTMODE
No CATT active
DEFSIZE
Do not use default window size
RACOMMIT
Successful end on COMMIT WORK
NOBINPT
Batch input mode active ( SY-BINPT = X
NOBIEND
Batch input mode remains active after the BDC data

How can set screen resolution on firefox , i know zoom in and out but i want set my broswer to my favorie levelof zoom

hi
how can set my firefox screen resolution ( i know zom in and zom out but when i restart my firefox , it chanaged to perviose level of zoom )

In case you are using "Clear history when Firefox closes":
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/Clear+Recent+History
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords and website specific setting like the page zoom.
Clearing cookies will remove all specified (selected) cookies including cookies with an allow exception.

How to do screen resolution in session method

hi guru how to do screen resolution in session method.
please tell me.
regards
subhasis

Sometime back this is refered in SDN :
Check table CTU_PARAMS and field DEFSIZE for setting fixed line of table control.
CALL TRANSACTION 'VA01' USING it_bdcdata
OPTIONS FROM OPT
MESSAGES INTO it_mesg.
opt of type ctu_params.
WA_CTU_PARAMS-DISMODE = 'N'. "no screen mode
WA_CTU_PARAMS-UPDMODE = 'S'. "synchronus update
WA_CTU_PARAMS-NOBINPT = 'X'.
WA_CTU_PARAMS-NOBIEND = 'X'.
WA_CTU_PARAMS-DEFSIZE = 'X'. "Default size
Default size will play good role in terms of resoultion. in one system in table control you can see 10rows, but in others system it will show 20 records. it depends on resoultion. but when you set the default size then it will take same (default screen size) in all the systems when you run BDC.
Thanks!!

How to solve screen resolution in bdc

hi experts,
please tell me how to solve screen resolution in bdc.
regards.
subhasis

Hi,
Pls check other posts in SDN before posting ur thread..there is same thread related to this on this forum on same day.
Screen resolution means different in the screen display depending on ur system screen resolution.
suppose ur system resolution is diff and another's system is different then like in Tcode VA01, there will be 3 lineitems and another there will be 5 lineitems ,
so while doing recording and page down that will bw diff so there will be some problem
So u have to set the screen resolution as default by using CTU parameters..
write this code then
f_option-updmode = 'S'.
f_option-defsize = 'X'.* f
_option-dismode = 'N'.
*call transaction 'VA01' using bdcdata options from f_option messages into bdcerror.
Hope it helps.
Regards,
Sonika

How to handle screen resolution in bdc session method.

hi all,
how to handle screen resolution in bdc session method.

Hello,
Why do need that for? Is it to add rows on a table control??
If it does, add new rows by using the add button instead of adding into the table control directly to each row.
Bye
Gabriel.

How to handle screen resolution in session method

how to handle screen resolution in session method without bdc_insert .

Hello,
Why do need that for? Is it to add rows on a table control??
If it does, add new rows by using the add button instead of adding into the table control directly to each row.
Bye
Gabriel.

How to create screen resolution in bdc table control

hi gurus
can anyone suggest me
how to create screen resolution in bdc table control
thanks&regards
mark.

Hi ,
Using CTU_PARAMS table for screen resolution .
For this sample code.
This is for Transation FB60.
report ZZFB60
       no standard page heading line-size 255.
tables t100.
PARAMETERS : p_file1 like rlgrap-filename,
             p_doctyp like RF05A-BUSCS,
             p_invdat like INVFO-BLDAT,
             p_posdat like INVFO-BUDAT.
CONSTANTS : C_TRANS_FB60(4) VALUE 'FB60'.
*Parameter string for runtime of CALL TRANSACTION
data : l_option type ctu_params,
       l_subrc type sysubrc.
DATA : l_mstring(150).
data      accnt type char17.
data       : day   type char2,
             month type char2,
             year type char4,
             date1 type char10,
             date2 type char10.
data      : cnt(2) TYPE n,
             cnt1 type i,
             fld(25) TYPE c.
data : begin of excel occurs 0,
        fieldname(255) type c,
       end of excel.
DATA:BEGIN OF it_mess OCCURS 0,
         msgtyp(5),
         lms(200),
          msgv1(50),
     END OF it_mess.
data: begin of t_record occurs 0,
         BUKRS(004),
        ACCNT(017),
        XBLNR(016),
        WRBTR1(016),
        WAERS(005),
        SECCO(004) ,
        SGTXT(050),
        HKONT(010),
        WRBTR2(017),
        MWSKZ(002),
        GSBER(004),
        KOSTL(010),
     end of t_record.
*Internal Table for Header Data
DATA : BEGIN OF t_head OCCURS 0,
        BUKRS(004),      "Company Code
        ACCNT(017),      "Account or Vendor
        XBLNR(016),      "Reference
        WRBTR1(017),     "Amount in document currency
        WAERS(005),      "Currency
        SECCO(004),      "Section Code
        SGTXT(050),      "Text
        END OF t_head.
*Internal table for Item Data
DATA : BEGIN OF t_item OCCURS 0,
        ACCNT(017),      "Account
        HKONT(010),     "GL Account
        WRBTR2(017),    "Line item Amount in document currency
        MWSKZ(002),     "Tax Code
        GSBER(004),     " Business Area
        KOSTL(010),     "Cost centre
        END OF t_item.
DATA: IT_BDCDATA      LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
      IT_BDC_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*include bdcrecx1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
start-of-selection.
l_option-defsize = 'X'.
l_option-dismode = 'A'.
l_option-updmode = 'S'.
day = p_invdat+6(2).
month = p_invdat+4(2).
year = p_invdat+0(4).
concatenate day month year into date1 SEPARATED BY '.'.
day = p_posdat+6(2).
month = p_posdat+4(2).
year = p_posdat+0(4).
concatenate day month year into date2 SEPARATED BY '.'.
*perform open_group.
loop at t_head.
CLEAR    IT_BDCDATA.
REFRESH IT_BDCDATA.
perform bdc_dynpro      using   'SAPLACHD'         '1000'.
perform bdc_field       using   'BDC_OKCODE'        '=ENTR'.
perform bdc_field       using   'BKPF-BUKRS'        t_head-bukrs.
perform bdc_dynpro      using   'SAPMF05A'          '1100'.
perform bdc_field       using   'BDC_OKCODE'        '/00'.
perform bdc_field       using   'RF05A-BUSCS'       p_doctyp.
perform bdc_field       using   'INVFO-ACCNT'       t_head-accnt.
perform bdc_field       using   'INVFO-BLDAT'       date1.
perform bdc_field       using   'INVFO-BUDAT'       date2.
perform bdc_field       using   'INVFO-XBLNR'       t_head-xblnr.
perform bdc_field       using   'INVFO-WRBTR'       t_head-wrbtr1.
perform bdc_field       using   'INVFO-WAERS'       t_head-waers.
perform bdc_field       using   'INVFO-SECCO'       t_head-secco.
perform bdc_field       using   'INVFO-SGTXT'       t_head-sgtxt.
cnt = 1.
cnt1 = 1.
loop at t_item where accnt = t_head-accnt.
*if cnt > 4.
*cnt = 4.
*endif.
if cnt1 gt 1.
CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
perform bdc_field      using   fld                   'X'.
perform bdc_dynpro      using 'SAPMF05A'          '1100'.
perform bdc_field       using 'BDC_OKCODE'        '=0005'.
endif.
perform bdc_dynpro      using 'SAPMF05A'          '1100'.
perform bdc_field       using   'BDC_OKCODE'        '/00'.
CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-hkont.
CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
perform bdc_field using       fld                t_item-wrbtr2.
CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-mwskz.
CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-gsber.
CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-kostl.
perform bdc_field      using 'BDC_CURSOR' fld.
*CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
*perform bdc_field      using   fld                   'X'.
cnt1 = cnt1 + 1.
*cnt = cnt + 1.
*if cnt > 1.
*perform bdc_dynpro      using 'SAPMF05A'          '1100'.
*perform bdc_field       using 'BDC_OKCODE'        '=0005'.
**perform bdc_field       using 'BDC_OKCODE'        '=0006'.
*endif.
endloop.
perform bdc_dynpro      using 'SAPMF05A' '1100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BS'.
perform bdc_dynpro      using 'SAPMSSY0' '0120'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
*perform bdc_transaction using 'FB60'.
CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA options from l_option
                             MESSAGES INTO IT_BDC_MESSAGES.
perform error.
perform errordownload.
endloop.
*perform close_group.
*Form data_upload
FORM data_upload .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME              = p_file1
   FILETYPE              = 'DAT'
TABLES
    DATA_TAB             = t_record.
ENDFORM.                    " data_upload
*Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = 'p_file1'
    IMPORTING
      file_name     = p_file1.
ENDFORM.                    " file_selection
Form BDC_DYNPRO
FORM BDC_DYNPRO using program dynpro.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
endform.
*Form BDC_FIELD
FORM bdc_field using fnam fval.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Table Control
FORM table_control .
LOOP AT t_record.
    ON CHANGE OF t_record-accnt.
      MOVE-CORRESPONDING t_record TO t_head.
      APPEND t_head.
    ENDON.
loop at t_head.
         t_item-accnt   = t_head-accnt.
         t_item-hkont   = t_record-hkont.
         t_item-wrbtr2 = t_record-wrbtr2 .
         t_item-mwskz   = t_record-mwskz .
         t_item-gsber   = t_record-gsber .
         t_item-kostl   = t_record-kostl.
    APPEND t_item.
endloop.
     If t_record-level = 'H'.
         t_head-bukrs   = t_record-text1.
         t_head-accnt   = t_record-text2.
         t_head-xblnr   = t_record-text3.
         t_head-wrbtr1 = t_record-text4.
         t_head-waers   = t_record-text5.
         t_head-secco   = t_record-text6.
         t_head-sgtxt   = t_record-text7.
      APPEND t_head.
     else.
        t_item-accnt   = t_head-accnt.
        t_item-hkont   = t_record-text1.
        t_item-wrbtr2 = t_record-text2.
        t_item-mwskz   = t_record-text3.
        t_item-gsber   = t_record-text4.
        t_item-kostl   = t_record-text5.
     APPEND t_item.
     endif.
ENDLOOP.
ENDFORM.
FORM error .
LOOP AT IT_BDC_MESSAGES.
    IF IT_BDC_MESSAGES-msgtyp = 'E'.
   SELECT single * FROM t100 WHERE
                                sprsl = it_BDC_MESSAGES-msgspra
                                AND   arbgb = IT_BDC_MESSAGES-msgid
                                AND   msgnr = IT_BDC_MESSAGES-msgnr.
      IF sy-subrc = 0.
        l_mstring = t100-text.
        IF l_mstring CS '&1'.
          REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
          REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
          REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
          REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
        ELSE.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
        ENDIF.
        CONDENSE l_mstring.
        it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
        it_mess-lms = l_mstring.
        it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
        APPEND it_mess.
      ELSE.
        it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
        it_mess-lms = l_mstring.
        it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
        APPEND it_mess.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
form errordownload.
*down the internal table to excel file.
call function 'EXCEL_OLE_STANDARD_DAT'
           EXPORTING
                file_name                 = 'c:/Error.xls'
           TABLES
                data_tab                  = it_mess
                fieldnames                = excel
           EXCEPTIONS
                file_not_exist            = 1
                filename_expected         = 2
                communication_error       = 3
                ole_object_method_error   = 4
                ole_object_property_error = 5
                invalid_filename          = 6
                invalid_pivot_fields      = 7
                download_problem          = 8
                others                    = 9.
endform.
Reward if useful
Regards,
Narasimha
Edited by: narasimha marella on May 13, 2008 12:12 PM

How to make screen resolution independent in BDC

How to make screen resolution independent in BDC

hi
good
You need to use the CTU_PARAM structure alon with the call transaction statment.
**Sturcture of CTU_PARAM
**DISMODE : Display mode (like the MODE addition 'A' , 'E', 'N')
**UPDMODE: Update mode (like the UPDATE addition 'S', 'A')
**DEFSIZE : Use default window size (Here we are handling those transaction by giving default window size)
**RACOMMIT: Do not end transaction at COMMIT WORK
**NOBINPT : No batch input mode (that is, SY-BINPT = SPACE)
**NOBIEND : No batch input mode after the end of BDC data.
*The components DEFSIZE , RACOMMIT, NOBINPT, and NOBIEND always take the following values:
'X' Yes
DATA : L_OPTION TYPE CTU_PARAMS, "Parameter string for runtime of CALL TRANSACTION
L_SUBRC TYPE SYSUBRC.
L_OPTION-DEFSIZE = 'X'.
L_OPTION-DISMODE = P_MODE.
L_OPTION-UPDMODE = 'S'.
CALL TRANSACTION 'FK01' "FK01-Vendor master creation
USING IT_BDCDATA
MESSAGES INTO IT_MESSTAB
OPTIONS FROM L_OPTION.
thanks
mrutyun^

How to change screen resolution on touchpad

how to change screen resolution on touchpad ?i was working on my tp and out of the blues my screen looks like it is at 800*600
or is this the screen itself that went bad?
can someboby please tell me the procedure to use the 12 mt warranty..
tia
Post relates to: HP TouchPad (WiFi)

Sorry to say reloading WebOS did not help this issue on my TP. contacted Support and was told to send it.Even sorrier to say that my TP is now lost. My tracking number reports it as delievered on Dec 5, but HP has no record of it.When I got back on Chat they are now also telling me that my TP serial number is a EU model, even though my box clearly states HP Touchpad ,US, 1.20,32gb,Wifi.
Not sure what that even has to do with it being lost now..if it is as they say and no warranty on it in US I just want it sent back.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How do I set screen resolution?

I need to check and reset screen resolution on my MacBook in order to connect it to a new TV.
Thanks

Use the Displays preferences in System Preferences.

Can't set screen resolution

I have a Lenovo Yoga 2 Pro. The native resolution is 3200x1800. On archlinux (running latest Gnome3), I don't have the option to set the resolution to 1080p (1920x1080). However, I do have this option on Ubuntu and it works perfectly.
I have read https://wiki.archlinux.org/index.php/xr … esolutions and did what it says. Here's my script to change the resolution:
xrandr --newmode 1080p 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
xrandr --addmode eDP1 1080p
xrandr --output eDP1 --mode 1080p
gsettings set org.gnome.desktop.interface text-scaling-factor 1.0
It worked for a while, but a few months ago, it stopped working. When I run this script, the screen would blink twice, and go back to 3200x1800. I ran the script with `journalctl -f` on, and here's what's in my logs:
Mar 21 11:45:42 sargas gdm-Xorg-:0[303]: (II) intel(0): resizing framebuffer to 1920x1080
Mar 21 11:45:42 sargas gdm-Xorg-:0[303]: (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
Mar 21 11:45:43 sargas gdm-Xorg-:0[303]: (II) intel(0): resizing framebuffer to 3200x1800
Mar 21 11:45:43 sargas gdm-Xorg-:0[303]: (II) intel(0): switch to mode [email protected] on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
You can see it switched right back to 3200x1800. I don't see any information in other logs such as the X logs. Any idea how I go about debugging it? I know it's a supported resolution since I can change to it under Ubuntu and it used to work under Arch.
Thanks in advance!

My sysadmin skills are rusty. I'm not sure how to see how it was mounted. I selected it from the vm's Devices menu and it gets mounted under /media.
-r-xr-xr-x 1 pnosko root 2825675 Jun 25 10:00 VBoxLinuxAdditions-x86.run
[root@oracle11gr2 VBOXADDITIONS_3.2.6_63112]# head -5 V*86.run
#!/bin/sh
# This script was generated using Makeself 2.1.5
CRCsum="323821212"
MD5="27c56ae5150d4947b538ddc6e66a0b19"
It is executable, and I believe a ./VBoxLinuxAdditions-x86.run runs it, and yes, by "points to" I meant the first line in the script. So I'm not sure why I have to invoke it as */bin/sh* ./VBoxLinuxAdditions-x86.run to get it to run successfully.
I'm obviously beyond this, but if you have an answer it would satisfy a bit of curiosity.
After installing the additions, I can still only run at 1600x1200. I can live with this. I suspect it's a VirtualBox limitation since I can only give 128mb to video memory. After the GUI oracle11g database install, ssh is all I need anyway.
Thanks all.

Setting screen resolution on a retina MacBook Pro

If I need my screen resolution to be 1920x1080, how do I set that in System Preferences>Displays?
Thanks very much.

well I found SwitchResX wich seems to not only give me the resolution in numbers it also gives me alot more control of the screen settings.

WPB help setting screen resolution

Hi,
Just started using WPB and discovered we need to change the screen resolution in our 30 installs of Instant Producer.
I've changed the resolution setting in Producer and would like to upload the settings to Manager so the Instant Producer users can access it and download it to there computers. I've searched through the Producer guide, but unable to locate any instructions on how to do this. Is anyone familiar with the steps involved to change the settings in the Instant Producer installs.
Thanks,
Dave

Search the forum using the keywords "screen resolution" would be a good place to start.

How to change Screen resolution

Hi - I installed enterprise linux on VMware running on windows 7. The screen resolution show 800x600 which sucks. How can i change the screen resolution? thanks

You need to install VMware Tools, which will allow the VM to have a better screen resolution and color depth, a gigabit network connection and intelligent memory management. Also set your monitor to a device that supports the higher resolution.
http://www.devside.net/blog/vmware-player-resolution
http://communities.vmware.com/thread/152837
http://communities.vmware.com/message/488011

How to set screen resolution on Apple TV Gen2

Similar Messages

Maybe you are looking for