How to set system date as a default value in UIX/XML page?

Example: We set default values using following statements:
<set property="inputValue" target="${bindings.PoNumber}" value="${'1234'}"/>
<set property="inputValue" target="${bindings.UserName}" value="${param.MyParam1}"/>
In JDeveloper Help, we cannot find a way to set a Date attribute's default value to today's (system) date. Any suggestions?
Also, does anyone have a reccomendation on a good book for uix/xml?
Thanks, Ali.

bump

Similar Messages

How to set current year,month as default value in combo box

hi, im newbie of xcelsius user
i realize that hv a issue that display combo box base on year & month
let said
step 1
I create excel data like this
year___ | month_ | Product | revenue
02-04-09 | 02-04-09 | a | $4,154
03-04-09 | 03-04-09 | b | $6,813
04-05-09 | 04-05-09 | a | $9,875
05-06-09 | 05-06-09 | b | $6,813
06-04-10 | 06-04-10 | a | $6,813
07-04-10 | 07-04-10 | b | $9,875
08-06-10 | 08-06-10 | a | $9,875
22-06-10 | 22-06-10 | b | $6,813
Step2
Then i go format cell to format/custom date to year & month
Eg1: Year u2013> 02-04-09 convert to u2018YYYYu2019 (2009)
Eg2: Month u2013> 02-04-09 convert to u2018mmmmu2019 (April)
So output like this
year | month | Product | revenue 
2009 | April | a | $4,154
2009 | April | b | $6,813
2009 | May | a | $9,875
2009 | June | b | $6,813
2010 | April | a | $6,813
2010 | April | b | $9,875
2010 | June | a | $9,875
2010 | June | b | $6,813
But the problem is when i insert to combo box,use u201Cfilter Row u201D, i excpectation will display only 2009,2010
But Actual display the Year in combo box is duplicated :'(
so any solution ? and then only how to set current year & month as default value :'(
thanks,
regards
s1
Edited by: Leong Pui Kee on Feb 25, 2011 5:25 AM
Edited by: Leong Pui Kee on Feb 25, 2011 5:36 AM

hi,
your created data
step 1
I create excel data like this
year___ | month_ | Product | revenue
02-04-09 | 02-04-09 | a | $4,154
03-04-09 | 03-04-09 | b | $6,813
04-05-09 | 04-05-09 | a | $9,875
05-06-09 | 05-06-09 | b | $6,813
06-04-10 | 06-04-10 | a | $6,813
07-04-10 | 07-04-10 | b | $9,875
08-06-10 | 08-06-10 | a | $9,875
22-06-10 | 22-06-10 | b | $6,813
In this, year and month both are same data, make the diffent data like year 2009, 2010 And month Jan, Feb, March, ...Etc
and also one more check you formulas on month and year, select correct source data, destination data for compoonent..
OR
from above, to create a date column and convert date-->year, date--> month and Explore it.
All the best,
Praveen

How can I render an active link (yrl) within a UIX/XML page

How can I render an active link (url) within a UIX/XML page.
How can I get <jbo:ShowValue> to work in UIX/XML, or is there another way?
Bill G...

It may seem strange, but the <contents> of <rawText> aren't actually
raw - it's only the "text" attribute that's raw. (It seems strange because
it is. Ah well.) This is different from UIX JSP.
So, try something like the following:
<bc4j:attrScope name="Notes">
<contents>
<rawText text="<a href=""/>
<rawText>
<boundAttribute name="text">
<bc4j:attrProperty name="value"/>
</boundAttribute>
</rawText text="">"/>
Some text in the link.
<rawText text="</a>"/>
</contents>
<bc4j:attrScope>
Thankfully, this will be much simpler in 9.0.3, when the following
will work:
<link text="Whatever you want">
<boundAttribute name="destination">
<bc4j:attrValue name="Notes"/>
</boundAttribute>
</link>

How to set Oracle Data Integrator Timeout paramter value as unlimited

Hi
Can any one help me how to set Oracle Data Integrator Timeout (ODI menu>User Paramter>Oracle Data Integrator Timeout > paramter value as unlimited.
By default it is 30 and i want to change it as unlimited.
I am connecting linux box through windows using citrix and opened ODI and start the scenario execution (my scenario execution in loop and it will execute continuesly) after execution starts I an logout from citrix (I am not closing ODI) and after some time like 50 min my odi execution is stoped due to timeout.
my ODI execution should continue in my absence that to unlimited.
Please help me it is urgent
Regards,
Phanikanth

Thanks Bhabani
Is it work for unlimited in linux box because I have given operator dispplay limit(0=no limit) as 1000000 and I am unable to see the execution session details on Operator>session list
later i have changed to 10000 and click on ok and just refreshed and it is working fine
If I give mensioned below it will not impact on ODI ?
windows it is working but I have doubt on linux version
Please help me
Regards,
Phanikanth

IW31 how to set functional area as a default value?

Dear all:
Can anyone guide me, is any way to set "functional area" as a default value (t-code iw31 Additional Data -> Functional area)?
Thanks in advance.

Hello ,
The standard funtionality is set to default the Functional Area from the Order Type. I believe it is possible to change the default value for the Functional Area in Transaction KOT2. The PM order types should be selectable in this transaction.
I hope this information has been helpful.
Best Regards,
Frank

How can I set the date today as default value in a parameter?

Hi,
I have in my report a date parameter and I want to set as default value the date today.
How can I do this?
Thanks in advance

If you are using a datatemplate , you can have a beforereport trigger that will have a package call.
In the package spec, define a date variable and also define the function beforereporttrigger that retruns boolean.
In the body, define the beforereporttrigger function with
begin
select sysdate into specvariable from dual
return(true);
end;
You can then use the variable in the datatemplate as :variable.
Hope this helps.
- Vasu -

How to set Current Date as default date in the form?

Hi ,
I have a date field and in the form I need it to be 'Current Date' as defualt.
How do I get it in Portal??
Thanx
swati

In the "Default Value Type" you choose "SQL query returns date" and in Default Value you write "select sysdate from dual".

How to set InDesign CS5 as the default in the system having InDesign CS4 has the default ?

How to set InDesign CS5 as the default .indd application when you have InDesign CS4 and CS5 installed and InDesign CS4 is the current default (InDesign CS4 was installed after CS5 installation)

Thanks, but I already tried it at first but it is not the effective method.
I think its because of the this reason :
Both - InDesign CS4 and InDesign CS5 have their application/program/exe named as "indesign.exe".
Installation of either InDesign CS4 or InDesign CS5, sets a Windows default path for the "indesign.exe". In this case, since InDesign CS4 was installed later (after InDesign CS5 was already installed), the "indesign.exe" which was directing InDesign CS5's "indesign.exe" was replaced by InDesign CS4's "indesign.exe".
But after long google and search through regedit, I've got the solution :
Locate HKEY_CLASSES_ROOT\InDesign.Document\Shell\Open\Command in regedit
Change the value of (Default) attribute to "C:\Program Files (x86)\Adobe\Adobe InDesign CS5.5\InDesign.exe" "%1" // Include the quotes
Message was edited by: Vidit Kothari

How to set a date range for date field ?

Dear Experts,
Scenario:
I have a query in validating the date field in my BSP application. My application is for maintain infotype 0023 Other/Previous Employers online by employees in the company.
As per our design we are maintaining the all employment details of the employee both ( with in the current company / previous employment outside the company) in the same infotype.
Every employee will have a hiring date within the SAP HR system. We consider this date as the cutoff date between current and previous employment in our application. When the employee updating the details wia BSP page I need to check the following.
Record inside current company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) greater than or equal HIRING DATE and END DATE(ENDDA) should be greater than FROM DATE (BEGDA).
Record outside current Company: Validation that, the user should only able to enter BEGIN DATE (BEGDA) less than or equal HIRING DATE and END DATE (ENDDA) should be greater than FROM DATE (BEGDA) and less than HIRING DATE.
Technical Requirement:
How to set a date range for date field, i.e. how we can limit the date range in a HTMLB date field? Can this it be achieved via standard functionality of HTMLB?
Following is the code to describe date field in my application.
 <htmlb:inputField id= "ENDDA_NEW_IN"
 type= "date"
 doValidate= "TRUE"
 showHelp= "TRUE"
 disabled= "FALSE"
 width= "183"
 style= "cssTextAreadate"
 value= "<%='99991231'%>"/>
Thanks a lot in advance for your assistance and help.
Cibinu2026
Edited by: cibin kuruvilla on Nov 12, 2008 11:13 AM

Hi,
This functionality is known to be very important and is a key part of the next major release of the JRC planned for the first half of 2008.
Regards,
Blair Wheadon
Product Manager, Crystal Reports

[ASK] How to get system date and substring / concate in data manager dynami

Hello guys.
I want to run package DM with the input have default value.
The selection is look like this :
Dimension : CATEGORY
Source : PLAN_2011
Destination : FORECAST_2011
Dimension : TIME
Source : 2011.JAN,2011.FEB,2011.MAR,2011.APR,2011.MAY,2011.JUN,2011.JUL,2011.AUG,2011.SEP,2011.OCT,2011.NOV,2011.DEC
Destination : <same>
How to get system date year and do the substring / concate ?
So dimension category source will be PLAN_<YYYY>, destination = FORECAST_<YYYY>
Dimension source = <YYYY>.JAN,<YYYY>.FEB,<YYYY>.MAR,<YYYY>.APR,<YYYY>.MAY,<YYYY>.JUN,<YYYY>.JUL,<YYYY>.AUG,<YYYY>.SEP,<YYYY>.OCT,<YYYY>.NOV,<YYYY>.DEC
Depend on year system date.
Thank you.

Stuart,How are you storing OnSaleDate. If you are using OnSaleDate as an attribute dimension then you can write a Custom Defined Function to either:1- query your system for the current date and return the number of seconds that have elapsed since 1/1/1970. This is by definition the begining of the Epoch and how Essbase treats Attribute Dimensions of the Date type.public static long getDateInSeconds() { Calendar cal = Calendar.getInstance(); return cal.getTime().getTime()/1000;}2- Write a Custom Defined Function that will accept the OnSaleDate and return the number of days sincepublic static double daysSince(double myDate) { return (getDateInSeconds()-myDate )/86400;}

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
The following is my configuration in the conf\mapViewerConfig.xml:
<map_data_source name="mvdemo12"
jdbc_host="127.0.0.1"
jdbc_sid="orcl12c1"
jdbc_port="1522"
jdbc_user="mvdemo"
jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
editable="true"/>

But it does not work.
After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
Does anyone know it?
Thanks,

For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
//mypdb1.foo.com as described in the README,
- MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
<map_data_source name="myds"
 jdbc_host="foo.com"
 jdbc_sid="//mypdb1.foo.com"
 jdbc_port="1522"
/>
For 11.1.1.7.0 use a container_ds instead.
i.e. instead of using
<map_data_source name="my_12c_test"
 jdbc_host="mydbinstance"
 jdbc_sid="pdborcl12c"
 jdbc_port="1522"
 jdbc_user="mytestuser"
 jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
 jdbc_mode="thin"
 number_of_mappers="6"
 allow_jdbc_theme_based_foi="false"
 editable="false"
 />
use
<map_data_source name="my_12c_test"
 container_ds="jdbc/db12c"
 number_of_mappers="6"
 allow_jdbc_theme_based_foi="false"
 editable="false"
 />
In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
Property
url jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
Add a JDBC resource for that newly created pool
Use that in mapviewerconfig.xml as above

How to dispaly System date time on Jsff page ?

Friends,
It would be simple question for you , Any one has idea about
How to dispaly System date time on Jsff page using any expression laungage ?
Thanks in Advance

Hi,
I have a solution for you I hope that is helps.
add this to the top of your page...
<jsp:useBean id="now" class="java.util.Date" scope="request" />
so, you want the current date?
<af:outputText value="#{now}"/>
you can use the format for date also.
I hope it is what you want.

HT204380 How to set my iPad as a default device while my iPhone and iPad share a same email address?

How to set my iPad as a default device while my iPhone and iPad share a same email address?

Shiv1611 wrote:
Though i am still gona try using the same Itunes. Will same Itunes support two apple ids.
That depends on what you mean. If you mean two iTunes Store accounts, no. Only one Apple ID can be logged into the iTunes Store at a time and if automatic download, iTunes Match or re-downloading of content is used the ID can not be changed for 90 days.
Shiv1611 wrote:
So i guess if i solve my goof up on creating different apple IDs and setting her phone as a new one .. according to you that shall do the trick.
But i have a question here in that case what happens to all the applications that have been purchased on my Id ? Wont i be needing them to be purchased/downloaded again in the new id?
If you previously had been using the same Apple ID for iTunes Store purchases for both of you there is no reason to change what you've been doing. If this is your wife's first iPhone, and you want to share the iTunes Store account just don't use the new Apple ID you created. As long as there are no purchases on it there's nothing to worry about.

How to set Bluetooth headset as a default answering device in iphone?

How to set Bluetooth headset as a default answering device in iphone?

All you need is to pair it.
http://support.apple.com/kb/TS2225

How to convert system Date into DD-MMM-YYYY Format

hi friends,
please help me How to convert system Date into DD-MMM-YYYY Format.
Regards
Yogesh

HI..
data: w_dt(11) type c,
         w_month(2),
         w_mon(3).
w_month = p_date+4(2). **p_date = given date**
case w_month.
when '01'.
w_mon = 'Jan'.
when '02'.
w_mon = 'Feb'.
when '03'.
w_mon = 'Mar'.
when '04'.
w_mon = 'Apr'.
when '05'.
w_mon = 'May'.
when '06'.
w_mon = 'Jun'.
when '07'.
w_mon = 'Jul'.
when '08'.
w_mon = 'Aug'.
when '09'.
w_mon = 'Sep'.
when '10'.
w_mon = 'Oct'.
when '11'.
w_mon = 'Nov'.
when '12'.
w_mon = 'Dec'.
endcase.
Now...
concatenate p_date6(2) '-' w_mon '-'   p_date0(4) into w_dt.
write w_dt.

How to set system date as a default value in UIX/XML page?

Similar Messages

Maybe you are looking for