How to set the default SASL auth mech

Does any body know how I can set the default SASL auth mechanism? I can currentlly authenticate to slapd only when requesting manualy CRAM-MD5 and I would very much like to set that as the default. In a non-macosx server environment creating a
/usr/lib/sasl2/[service_name].conf
file and putting in
'mech_list: CRAM-MD5'
solves the issue, but on macos x server it doesnt really help. I'm not sure if this is the correct file at all.
(situation described in detail hre: http://discussions.apple.com/thread.jspa?threadID=894046&tstart=0)
Xserve G4 Mac OS X (10.4.9)

Slowfranklin, thanks for your helpful posts.
My ultimate goal is to have a shared conact list in our OD database. I want to be able to give Joe User a friendly interface to insert update and use this contact list. 2 solutions I found are j2anywhere.com's AddressBookXLDAP and the open source package phpLDAPadmin (far more complicated, but OK). Both won't work on my particular setup and I'm trying to figure out why. You helped me figure out how to authenticate (this thread: http://discussions.apple.com/thread.jspa?threadID=894046&tstart=0). My guess is, if I use the same settings for ABXLdap thinks will start working. I don't have no way to set the -Y CRAM-MD5 option on the application level, so I'm looking for a way to set it golobally, on the server level.

Similar Messages

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

"I would like to know how to set the default view for the columns. Somewhere I read it could be done in by music icon under Library. Can't find it. Thanks

"I would like to know how to set the default view for the columns that are shown in iTunes. Every time I open it, I have to either go to the options, or right-click to get the pop-up options, and delete "rating" and add "composer." I'd really like to just do it once and be done with it." Somewhere I read you could do this by clicking on the Music icon under LIBRARY then arramge the columns. Trouble is, I can't find a Musi Folder or icon in my user library.
Any help would be appreiated. OSX 10.9.2 iTunes version 11.1.5 Thanks!!! CW!

From the iTunes menu bar try View>Show View Options. Make sure what you want to see is checked and what you don't is unchecked. You can do this (may need to do this) for any playlists, your main Library, etc.
Good luck
srb

How to set the default text in an input box or a label to be a predefine, multiline text

how to set the default text in an input box or a label to be a predefine, multiline text. In other words how to break the line in the code of a text box.
thank you

There are a couple of ways of doing this:
If you're editing on the canvas, press Shift + Enter.
If you're working in Express View (see lower right hand corner of Project Siena), you'll need to copy a hard return from another app such as Notepad.
I believe a better implementation of hard returns are in the list of requested functionality that you can find here:
https://social.technet.microsoft.com/Forums/en-US/2e1f9446-56b2-419a-9c17-7037d2cd6146/from-the-community-overview-of-requested-additional-functionality?forum=projectsiena
Thor

How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?

Hello Everyone,
How to set the default selection to "Select All" in a Multi valued parameter in SSRS 2008?
Regards
Gautam S
Regards

You need to specify "Default Values" in the report parameter property. Choose similar option used in the "Available Values" option, this will allow the parameter to check "Select All".
Regards, RSingh

How to set the Default values for Info Objects in Data Selection of InfoPac

Hi All,
Flat file Extracion:
How to set the Default values for Info Objects in Data Selection Tab for Info Package
ex: Fiscal Year Variant Info Object having values 'K4' 'Y2' etc in Flat file
Initially default value(not constant) for this info Object value should be 'K4' in Info Package
If I set data selection value for this info object K4 it will retreive records with this selection only? how to handle
Rgds,
CV

Hi,
suppose as your ex. if you are having fiscalyear variant in the dataselection tab then specify K4 in the from column, again the ficalyearvariant row and click on insert duplicate row at the bottom . you will get another row . In that enter Y2 in the from column. now you can extract K4, y2 values .
haritha

How to set the default context value for flexfield in OAFramework pages

Hi,
I have a page which contains a contexxt value field i.e Flexfields
To select the context value we have to select the value from drop down
So Here we want to display the context value immediately when the page is called
How to set the default valu in this case
Regards,
Krishna

You can set the Attribute category view attribute to the Flexfield context value and call prepareforRendering in the flex bean. Check the dev guide for details.
Regards
Sumit

How to set the default value of an item type DATE PICKER to the day of yest

Hi
How to set the default value of an item type DATE PICKER to the day of yesterday ?
Thank you very much !
Christian.

Hi Christian,
Have a look at this thread Re: Default the Date Picker to Today
It covers this issue in detail.
Regards
Paul

How to set the default value in dashboard prompt?

Hi there,
In my Dashboard prompt I'm getting values like:
Mar 2010
Apr 2010
May 2010
Jun 2010
How to set the default value to the current month (Jun 2010). I don't want to use "specific value". I want to use the "SQL Result" for populating the default value.
Appreciate your help

hi,
you can create a Repository variable current_month with the expression as
select to_char(trunc(sysdate),'Mon')from dual
and use this in the prompt "Default to" Server variable and use this repository variable.
hope this helps.
cheers,
vineeth

How to set the default settment rule for the same kind project.

hi experts:
the project of the same kind of the project profile have the same settment rule to one account (G/L).
how to set the default settment rule for the project of this kind of the project profile.
regards

Hi,
You need to define the settlement profile and allocation structure.
next you need to define the Strategy for settlement rule.
navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
--> Define strategy for settlement rule.
Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
Save this transaction.
Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
Now run CJB2 transaction for the project, settlement rule will generated automatically.
even you can configure the same for profitability segment.
Rgds
Sudhir Reddy

How to set the default NetworkInterface for the default socket factory?

Hi,
I would like to know how to set the default network interface used by the JVM. I saw that you can specify the network interface when creating a socket. But my problem is that I dont want to change every socket creation in the application and even worse some partner's libraries wich I dont have access to code also create sockets. So is there a way to specify to the JVM wich interface to use by default? I didn't saw any System.properties to set this and my googling fishing didn't return anything usefull.
Thanks

By default it will use whichever one the routing tables tell it will give the shortest path to the destination. For globabl changes, adjust your routing tables. You can't do this from Java, you have to use whatever OS tools are to hand.

How to set the default display date of Calender prompt of SMPortal???

Good Day!!
As for as my knowledge, the default date Visible in all Calender prompt will be the
Starting Date in the Specified date range either "RelativeDateRange" or "AbosoluteDateRange".
But we have a requirement to set the default date to a date in the middle of the specified range, I don't find any option to specify in Request Offering Wizard or MP's xml file.
Our scenario is as follows,
    We are trying to customize the CSPP's request offer "Request Virtual Machine", which has a user promt to select Decommission Date for the New VM. We have configured the date prompt as Relative Date range and set the
Start date as "1 day next to user's current time" and Maximum date to "90 days after relative date". So the user will get option to select Decomm date from (1-90) days with the defalut date as 1st day next to his current
time. But our requirement is to set the default available date as 90th date in the above mentioned Relative Date Range.
     I couldn't find any option in Request offering Wizard as attached below,
      Also I couldn't even find any tag to specify the default display date in the MP's XML file as attached below. Is there any other <tag> can be included inside <Details> tag to accomplish this ??
   Is there any other way to accomplish this???
    Please advise
Thanks,
Narayanababu
Thanks and Regards, Narayana Babu

This is probably a link editor parameter, see the linker and loader guide.
Another thing you can do is write your own sbrk() that will log whenever it's called, so you can at least see how many times it's called and with what values. If you really need in-depth instrumentation, write your own heap routines and give them the same names as the CRTL routines. The linker should find yours first and route all memory operations through them. At least, that's the way it worked for me on SunOS 4.1....

How to set the 'default to' field of a dashboard prompt to yesterday?

Hi everyone,
I have a dashboard prompt on a date (fully qualified name Date.Date and type Date).
I also have a simple report with two columns: Date.Date and a mesure (whatever the name).
I managed to filter on the day before the current date in the report by adding an advanced SQL filter:
Date.Date = Cast(TimestampAdd(SQL_TSI_DAY,-1,@{system.currentTime}) as Date)
Now, I would like the prompt to select the day before the current date by default.
The filter on Date.Date would be 'is prompted' or so.
How do I set the "Default to" field of the prompt?
Thanks in advance

Hi
go to your prompt..
select SQL Results from Default to: dropdown..
here.. you need to write your Logical SQL..
which defaults to the previous date
some thing like this..
*select case when 1=0 then anydate column else timestampadd(sql_tsi_day, -1, CURRENT_DATE) end FROM SubjectArea name*
write like this.. and report back...
Thanks & Regards
Kishore Guggilla

How to set the default maximum size for java's heap?

Hi!
Im trying to set the default max size for the java heap - but not from the command line.
I would like to set it higher as default on my computer.. how can I do that?
thanks!

>
...You may increase the memory heap only when you're launching a new JVM.>Much like IWantToBeBig does.
OTOH, it this is an app. with a GUI, it is easier to launch it using webstart, and request extra memory in the JNLP descriptor (the webstart launch file).

How to set the default item showed in a h:selectonemenu

I need to show the second, or the third, and on so.
i tried some ways to set the default item showed in it, but failed.
i had tried the attribute value, but it stiil showed the first item.
Can u help me?
in the JSP
<h:selectOneMenu id = "companyName" rendered="true" binding="#{j03CMSyainAddBean.selectCompany}" style="width:150">
<f:selectItems value="#{j03CMSyainAddBean.companyList2}"/>
</h:selectOneMenu>in the back BEAN
private UISelectOne selectCompany;
private ArrayList companyList2;In the ArrayList companyList2, there are several selectItems.
Thanks
George

Sanjeev K Sharma wrote:
and without messing with /boot/grub/grub.cfg ?
I need this so that new kernels show up but do not change the default boot kernel
Is there a way to do it by file name instead of position within the menuentry / submenu list?
I found some ubuntu and fedora sugestions but all by position, none by name
AND how to set the kdump kernel as the default?
Arch is putting this kernel under a submenu - would this pose problems for setting it as the default?
In /etc/default/grub you can use the name of your entry you wish to use as default
GRUB_DEFAULT='Arch Linux, with Linux core repo kernel'
You can tell grub to stop using submenus by doing:
GRUB_DISABLE_SUBMENU=y
Or you can just make a purely custom menuentry in /etc/grub.d/40_custom if you'd like:
menuentry "Other Linux" {
linux <KERNEL IMAGE HERE>
initrd <INITRD IMAGE HERE>
EDIT: /etc/grub/default -> /etc/default/grub
Last edited by Slabity (2015-04-07 11:16:22)

How to set the default SASL auth mech

Similar Messages

Maybe you are looking for