How to set the display size of the PDF - in percent?

Hi, I wonder if anyone knows if it is possible to set
the display size of the PDF document, so that it always
shows in, let´s say 100%, in the viewers browser window?
Much grateful for any help!
/Anni

In Acrobat, under Document Properties (Ctrl+D), you can edit the Initial
View settings, including the zoom level.

Similar Messages

  • How can you change the display size on the task bar

    how do you change the display size on the task bar

    If, however, you want to change the size of the display of the menubar, meaning make the icons and text larger, there is no way to do that directly other than to change the resolution of the screen.
    You can change the as-viewed size of that temporarily by using either -
    • Mouse zoom - if you have a Magic Mouse (Apple wireless mouse), hold down the Control key and use the scroll up and scroll down finger gestures on the mouse.
    • Zoom - go to System Preferences > Universal Access > Seeing and turn on Zoom. You can also use the noted keyboard shortcut to enable/disable this Zoom feature.

  • When creating a new DPS should I use sizes offered by InDesign or the display size of the device?

    Hello all,
    When creating a new DPS, should I use the sizes offered by InDesign or the display size of the device?  I ran into this question when I was looking up the sizes of different devices and found that iPhone 5s, iPhone5c, and iPhone4s sizes differ than the defauly dimensions offered by InDesign. 
    Also, should I worry about the ppi resolution?  With iPhone, they all seem to be 326ppi but when dealing with other devices is this something that I should take into consideration?  Ideally, I could be creating DPS apps for all devices offered in the Digital Publishing drop down in InDesign (iPhone, iPad, Kindle Fire/Nook, and Android).
    Thank you for any help you can provide.
    By the way, if it helps I am using InDesign CC.

    Using 1024x768 and creating PDF articles will get you OK with both iPad resolutions, and, as Bob L. says, quite decent "one size fits all" result for all other devices.

  • How to set a fixed size for the browser window on startup?

    so the browser window has the same size and location on the desktop every time i open a new window???

    In a 2D coordinate system the horizontal values are represented by some letter, usually x. In the same coordinate system the vertical values are classically represented by y.
    Note: In your code, if you wish, you can replace x and y with anything you desire--p and q or perhaps jeff and alice or any variable name you wish, but for simplicity, and usually ease of understanding because almost everyone has had 100's of math problems drilled into their head with (x, y), x and y are used as convention.
    In Java the screen coordinates run from 0 to the width-1 for x and 0 to height-1 for y of the component you are using to display.
    So logically when you have a value of x or y that goes beyond the addressable bounds of your display, then you have to make some type of adjustment--when your value dips below 0, you reset it to 0, when your value goes above what ever width-1 or height-1 then you have to set that value to width-1 or height-1.
    This all assumes that when you hit the wall, floor, or ceiling you stick there until you change directions--if you wish to wrap then you set your value to the opposite bound--so if you go below 0, you would then pop out back in on the right side--your appropriate x would be set to width-1 instead of 0 and in the case of y going below 0 your y would be set to height-1. This is also to say that when you descend below your minimum, then you would pop back out on the opposite side you went out on--so x greater then width-1 would get set to 0 and y greater than height-1 would get set to 0.
    That is not even a start on if you want to include elastic collisions, angle of impact, any type of deceleration force, or anything else.
    In any case... I would recommend that you add more math to your studies, I've never met an engineer or computer science grad that said: "Wow, I really regret taking all that math in college (or HS), I never use it."

  • How to set video display parameters for the guest OS?

    I don't see display adapter options in the hardware list for a VM.  How does the guest OS know what are the display resolutions available?
    I have installed Ubuntu 14 on two different PCs, one in Windows 8 Hyper-V and another in VirtualBox.  In VirtualBox, it started off with only one resolution: 640x480.  After I increased the video RAM from the default 12MB to 32MB, I get to choose
    from 800x600 as well as 1024x768.
    In my Hyper-V, my Ubuntu has only 1152x864. I need 1024x768. How do I do it?
    Thanks.

    Hi,
    The Ubuntu 14 not supported by Win8 Hyper-V, personal experience is same with Andrew_Grant, you can try to install the last Integrations Services.
    The related KB:
    Ubuntu virtual machines on Hyper-V
    http://technet.microsoft.com/en-us/library/dn531029.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to set  max-heap-size outside the jnlp file?

    Due to bug_id=6631056 It may not be possible to specify max-heap-size within
    the JNLP file for certain jnlp java applications.
    Are there other possibilities to specify this Jvm parameter?
    In the ControlPanel there is the possibility to specify Xmx for applets but not for jnlp.
    I have tried to add properties like
    "deployment.javaws.jre.0.args=Xmx\=128M" without success
    Many thanks

    Even in JNLP also you can specify the max heap size
    <j2se version="1.5+" initial-heap-size="128m" max-heap-size="512m"/>
    Thanks,
    Suresh
    [http://sureshdevi.co.in|http://sureshdevi.co.in]

  • Display Size of the Visual Admininstrator

    I have an interesting problem - the display size of the Visual Administrator in one of my Netweaver systems has opened very small - I cannot stretch it any bigger. In all the rest of my systems the Visual Admininstrator opens full screen (we are AIX-UNIX).
    I think I can probably solve the problem by rebooting the server but I would like to know if there is any way to control the size of the Visual Admininstrator? Is there a configuration file or something similar?
    Thanks
    Patrick

    Hello Patrick ,
    I have no idea how to resize the visual admin.
    But the easiest thing to do is to install the visiual admin locally on a windows desktop.
    Be shure you have installed jre 1.4.2 on your windows desktop.
    Then copy the complete /usr/sap/<SID>/DVEBMGSXX/j2ee/admin
    directory to your windows desktop.
    Just doubleclick on the go.bat and the visual admin starts.
    Create the desired connections and youre finished.
    Have fun,
    E.ITS-BAsis

  • Setting the step size of the scale in a graph

    I have a bar graph with floating point/decimal values. OBI automatically set the scale numbers/ticks on the y axis has to : 0.0%, 9.9%, 19.8, 29.7%, 39.6%, 49.5% and 59.4%.
    I would like to have nice and even steps of 0.5%, but it seems like I cannot influence this anywhere.
    The Axis Limits are set to Dynamic because I do not know in advance what the minimal and maximal values will be.
    The only way to be sure of a constant step size is by defining the min and max axis limits and then setting the major and minor ticks. But since I don't know the min and max in advance, this is not an option.
    Anybody any ideas on how to set a step size of the scale?

    Anybody any clue?

  • In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4?

    Question
    In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4

    Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Permanent Private Browsing mode"
    You can use one of these extensions to adjust the default font size and page zoom on web pages:
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resoluti

    I have Photoshop cs6 Ext on an ASUS laptop. How can I increase the font size of the contents of the FILTER Panel situated on bottom left of screen. The font size is extreamly small and almost unreadable. I have changed display parameters, not the resolution, to no avail.
    David.

    Paragraph breaks are good for readability. ;-)
    Have you noticed any difference between your MacBook and others at the Apple store? Wondering whether this is a configurable setting at the system level, i.e., DPI.
    You can default Firefox to a larger zoom level to avoid having to zoom every page. You'll still be able to adjust the size for individual sites as needed. It sounds as though you are aware of these add-ons:
    * Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    * NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
    There are some discussions about changing coming in Firefox 22 (I think) to address higher density displays like the Retina display. So perhaps there will be a built-in setting to address this in the future.

  • How to set the page size and the margins programatically

    Hello,
      I am working with crystal report XI Release2 and asp.net.
    One of my report is having 4 graphs in a single report.In order to display all the graphs in one page i have set  the paper size as A3.(Via Crysta report ->File->Page set up)
    But the page size A3 is not provided by all printers.So problem comes when the application is diployed on a machine which does not support A3 Printer.All the graphs will not be shown on a single page.
    Also Each and Every time ,when the application is diployed on a machine,user has to open the crystal report and adjust the page size accordingly to get all the reports on a single page.
    This is a kind of usability issue also.
    Is it possible to set the page size and the margins programatically say for eg 11 X 17.so that with out doing anything all the 4 graphs will get displayed on a single page ?
    Please let me know if you require more information regarding this issue.
    Thanks in advance.
    smitha.

    Hi Ludek,
    i could solve the issue by using the follwing code.
    report = new ReportDocument();
    PageMargins customPageMargin = report.PrintOptions.PageMargins;
    report.PrintOptions.PaperOrientation = PaperOrientation.Portrait;
    report.PrintOptions.PaperSize = PaperSize.Paper10x14;
    customPageMargin.rightMargin = 1;
    customPageMargin.topMargin = 0;
    customPageMargin.bottomMargin = 0;
    report.PrintOptions.ApplyPageMargins(customPageMargin);
    Thanks for you help.
    Regards,
    smitha.

  • How to set the minimum size of the JDialog.

    Hi Could any one tell me ,
    How to set the minimmum size of the JDailog.
    I am using the JDialog's setMinimumSize(...)
    But it is not working.....
    Regards -
    Vikas Kumar sahu

    That's pretty much all there is, although you could always add a componentlistener and manually not let the size go below your minimum.
    Or you could try overriding setSize...

  • How to reduce the font size of the title of grid ALV without using OOPS

    Hello
    i have a title which i have displayed in a grid layout using this code
    DATA: GRID_TITLE TYPE LVC_TITLE.
    GRID_TITLE = 'FACTORY OVERHEAD '
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
      I_GRID_TITLE                      = GRID_TITLE.
    Now i would like to reduce the font size of the text which is displayed "'FACTORY OVERHEAD '.
    how do i do that,i am new to abap.
    Thanks

    Hi,
    Set the font size to your requirement
    Go this below code.
    CLASS ZCL_GUI_ALV_GRID DEFINITION INHERITING FROM CL_GUI_ALV_GRID.
      PUBLIC SECTION.
        METHODS TITLE_SIZE.
      PRIVATE SECTION.
    ENDCLASS.                   
    Then use the above method in the Implementation part as .
    CLASS ZCL_GUI_ALV_GRID IMPLEMENTATION.
      METHOD TITLE_size.
        ME->SET_TITLE_SIZE( EXPORTING SIZE = 1
                            EXCEPTIONS ERROR = 1  ).
      ENDMETHOD.
    ENDCLASS.
    Now when your reference variable should be
    Data :GRID type ref to ZCL_GUI_ALV_GRID.
    and Create the Object as
    CREATE OBJECT GRID
               EXPORTING I_PARENT = G_CUSTOM_CONTAINER1.
    Before Calling Set_table_for_ first_display, Call the created method
    CALL METHOD GRID->TITLE_SIZE.

  • How to increase the font size in the safari tool bar

    Hello,
    I am trying to set-up Yosemite for my mom who is a senior.  The toolbar and address bar for safari seem to be quite small.  Does anyone know how to increase the font size in the tool bar and address bar?  I already figured out to make the font size bigger on a webpage which is nice but the rest of the interface, though pleasing to look at, is quite miniscule.
    Hope someone can help.

    I too would like an easier way to do it. The only way that I have found  (& it works for all applications, desktops Document & Download files) is to decrease the size of your Screen display from 2560 by 1440 ( this is your "Default for display") to 1920 by 1080. This is accomplished by going to "Accessibility Preferences" in your menu bar or through Systems  Preferences and choosing the DISPLAY icon, then unchecking the "Default for Display" Setting and then check "Scaled".
    Your screen resolutions will then appear in the drop down box & you can choose a smaller display (e.g. 1920 x 1440), then all print will appear larger on the screen.
    If anyone knows a slicker way, I 'm all ears (actually "eyes" would be more appropriate.
    I hope this helps you.
    -fpn7

  • How to set up automatic payment for the purchase order

    Hi, All,
    I have one question how to set up automatically payment for the Rent Office purchase Order?
    There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
    Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
    Thanks in advance

    Either you can set up ERS or you can pay directly from the FI side.
    Prerequisites
    Evaluated receipt settlement must be flagged in the purchase order item.
    The vendor must be flagged as being subject to ERS in the vendor master record.
    The goods receipt must refer to a purchase order.
    Goods-receipt-based Invoice Verification must be defined for the purchase order item.
    A tax code must have been maintained in the purchase order item.
    The order price of the materials may not be an estimated price.
    If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
    In Purchasing, you can delete the default ERS indicator in a purchase order item.
    Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
    The selection screen appears.
    You can use the following criteria to narrow down selection of the transactions to be settled:
    Company code
    Plant
    Goods receipt posting date
    Goods receipt document
    Fiscal year of the goods receipt
    Vendor
    Purchase order and order item
    You can define the selection criteria for the invoice documents by:
    Delivery
    Purchase order
    Purchase order item
    Goods receipt document
    Credit memo
    Invoice
    Currency
    Choose  Execute.
    The system issues a log for Evaluated Receipt Settlement, which displays the following:
    Settled
    In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
    Could not be settled
    In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
    If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
    Select the item and choose Exclude from ERS.
    The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
    You can display the following environment information for the order items selected. To do this, choose Goto ®:
    Display purchase order
    Display invoice
    Display material document
    Display long text

Maybe you are looking for

  • White Macbook (Early 2009) Why mini-DVI to S-video adapter no longer works?

    I am a lifelong Mac user and by now think I pretty well know the ins and outs of Macs and most Mac-related issues... but this one has stumped me. The new white Macbook was upgraded to include many of the components of its big brother unibody Aluminum

  • 645 Ultra Memory Limitation?

    I've had the 645 Ultra board for about 3 years now and I've had no problems running with 756MB of memory, one 512MB double-sided module and one 256MB double-sided module.  I received another 512MB single-sided module for Christmas (from Crucial, usin

  • How to display image that's in a table (BLOB datatype) in  apex 4.0 report

    I have an image that is in a table and I'm trying to get it to display in a report. The upload takes place on 1 page and the report is on another page. The source for the report page is as follows: select firstname, lastname, decode(nvl(dbms_lob.getl

  • ORA-01119 & ORA-07358

    well friends I have a problem creating a tablespace for my database been specific I write this command: create tablespace rbs datafile '/oracle/oradata/maximo/rbs01.dbf' size 360M; and what I get is the next error: ORA-01119: error in creating databa

  • Power Saver fatal error code 0x47f on Equium

    Hi I have a problem with power saver on my equium. When windos starts up a box appears saying 'fatal error toshiba power saver program will be terminated. error code 0x47f' i have tried using the tols and utilites cd to try and reinstall the power sa