How to set the error message when LIV amount over PO amount ?

Dear experts :
I create a PO without GR base IV , and I have setting limit in OMR6.
I hope system show error message when the LIV amount over PO amount .
But in fact , when LIV amount over PO amount , the system didn't show any message.
Hope someone can tell me ,besides OMR6, what setting I need do?
Thanks a lot.

Please use T code OMR6 & assign tolerance key for plant & Tlky -> BD TO "zero".
Regards
Bhavesh Mistry

Similar Messages

How to Customize the Error Message when a user enters a wrong password

Hi Gurus
Pls Help out me that
How to Customize the Error Message when a user enters a wrong password ?
I need the Help to Customize the messege ?
How we can do
Pls Tell me indetail

Firstly many appologies I have given you slightly duff information here, I had been editing the file above for email notification texts not logon / password texts.
The file you need is actually a portal .par file and can be found in the deployment/pcd directory. The file you need is called com.sap.portal.runtime.logon.par (with a .bak extension at this time).
You need to copy this file to a local machine and unzip the contents. The files you need to edit are contained in a further jar file which can be found in the \PORTAL-INF\lib directory - it is called umelogonbase.jar. It too needs to be extracted and the file you need to edit is logonMessages_xx.properties (where the xx is the language code you are using).
In this file you will find lines like:
NUMERIC_REQUIRED=Invalid new password (must contain digits)
You need to identify which texts you wish to modify and edit the text to the right of the equals sign. Once complete rezip the umelogonbase.jar file and then the com.sap.portal.runtime.logon.par (this time name it without the .bak extension. Then logon to the portal and upload the new par and you should see your new logon messages.
Haydn

How to read the error message like clipping positive or -ve in Tektronix oscillioscope 3012B

During acquiring the Sine wave or triangular wave from TDS3012B, if the amplitude or Max or min is clipping, how do you read the error? I used *ESR?, first time when I ran the error query program, it gave me Error message saying it is clipping, after that If I run again,the error query , It would not give me the error message, I couldn't reproduce it, eventhough but On the screen if I measure, Amp, min and Max it says that it is clipping positive or -ve. I was wondering how to read the error message while aquiring the data? If any one could help me that would be of great help.. Thanks

Usually, reading the error status register clears it. I'm not familiar with this particular model of scope but you may have to initiate a new acquisition in order for the scope to generate a new error. Another possiblity is that a new error will be generated when the vertical scale changes. Unless someone posts with an answer, I'd say that your best bet to get an answer is to contact Tektronix technical support.

There is the error message when we run IR8A report

Hi SAP expert,
There is the error message when we run IR8A report via T-code PC00_M25_NCT8A, below is the error message
"Assignment to valuation model is missing for calculation process 25 SGLS
Message no. HRSEN00107
Diagnosis
There is no entry in the assignment table for valuation model and rounding rule (V_T525S) for the return value for feature SENOR on the key date 07.12.2007 for the selected calculation process 25 SGLS (country grouping, calculation process, process step).
At least one valuation model must be assigned to each calculation process in view V_T525S.
Procedure
Make an entry for this calculation process and return value for feature SENOR in view V_T525S (Assignment of Valuation Model and Rounding Rule).
I would appreciate you very much if you could advise me how to solve this problem.

Hi ,
I am facing the same error like this,
please let how did you solve this iisue ?
thakn\s

How to customize the error messages in web analysis reports

Does anyone know how to customize the error messages that web analysis shows ,
I want to customize the below error message with a custom error message
"Document does not exist or no authorization to open document.Error occurred while loading document"
Does anyone know how to do this ?

Rajesh,
you may want to check these links
How to the Change the Application Stopped Message
How to Change the Dispatcher Running, No Server Connected Message
http://help.sap.com/saphelp_nw70/helpdata/en/65/18fc3f9ec4e669e10000000a155106/frameset.htm
Thanks
Bala Duvvuri

TS2529 how to fix the error message itunes can't sync apps because it can't determine what apps are installed

how to fix the error message itunes can't sync apps because it can't determine what apps are installed

Hi,
This may be Helpful
AMDS for Windows
http://support.apple.com/kb/TS1567

How to get the Error message from hr_contact_rel_api.create_contact

Hello All,
I am using this API for creating a contact for an employee in R12.
But, some times i am not able to create the contact successfully, and Unable to figure out proper reason for record erroring out.
I dont find any out msg data variables for this API in order to check it for the Error.
So, can any body help me how to get the ERROR Message for such APIs.
Thanks inAdvance,
Amarnadh Js

user12243334 wrote:
solved the issue on myselfIt would be nice if you could share the solution with us.
Thanks,
Hussein

[svn:fx-beta1] 7179: Improving the error message when Flex 4 primitives are added as children to Halo containers .

Revision: 7179
Author:   [email protected]
Date:     2009-05-21 08:54:48 -0700 (Thu, 21 May 2009)
Log Message:
Improving the error message when Flex 4 primitives are added as children to Halo containers.
QE: Yes, please add test cases and update any negative test error strings.
Doc: No
Checkintests: Pass
Cyclone Tests: Mxmlcunit, Mxunit - full, Mxunit - compc, Mxunit - rsl, and Compiler API all pass.
Reviewers: Paul, Glenn
Bugs:
SDK-21300 - Compiler error for using Graphic tags (like SimpleText) in a Halo container is wrong and misleading
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21300
Modified Paths:
    flex/sdk/branches/beta1/modules/compiler/src/java/flex2/compiler/mxml/builder/ComponentBu ilder.java
    flex/sdk/branches/beta1/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBui lder.java
    flex/sdk/branches/beta1/modules/compiler/src/java/flex2/compiler/mxml/lang/StandardDefs.j ava
    flex/sdk/branches/beta1/modules/compiler/src/java/flex2/compiler_en.properties

Please help me how concatenate all the error messages and send it as out parameter value.

Hi Experts,
Please help me how concatenate all the error messages and send it as out parameter value.
Thanks.

Agree with Billy, exception handling is not something that is done by passing parameters around.
PL/SQL, like other languages, provides a suitable exception handling mechanism which, if used properly, works completely fine. Avoid misuing PL/SQL by trying to implement some other way of handling them.

I keep getting the error message when trying to update iMovie There was an error in the App Store. Please try again later. (20)" Does anyone know how to fix it?

I keep getting this error message when updating imovie "There was an error in the App Store. Please try again later. (20). Does anyone know how to fix?

If you're having problems with the App Store you might try this:
1 - enable the Debug menu in App Store:
open the Terminal application.
copy the command below and paste into the Terminal window:
defaults write com.apple.appstore ShowDebugMenu -bool true
followed by Enter.
launch App Store, login.
2 - select the Debug ➙ Reset Application option:
3 - try again.
OT

How to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3g or gPRS on safari with an iphone 4 and latest software updates

Please can someone help me to solve the error message "Could not activate cellular data network: PDP authentication failure"when using 3G or GPRS on safari with an iphone 4GS and latest software updates. I have tried resetting the network and phone settings. I have restored the factory settings on itunes and still the problem persists.

All iPhones sold in Japan are sold carrier locked and cannot be officially unlocked by the carrier. If you unlocked it, it was by unauthorized means (hacked), and support cannot be given to you in this forum.
Hacked iPhones are subject to countermeasures by Apple, particularly when updating the firmware. It is likely permanently re-locked or permanently disabled.
Message was edited by: modular747

How to correct the error message that appears when installing photoshop CS5 for the third time

I need help so solve the error message that appears on my computer when I try to register the program for the third time. Please helpppppp!

If you're referring to the activations warning, simply call support to reset them.
Mylenium

How to display the error message during the web dynpro application runtime

hi,
    I'm a java developer,During i 'deploy and run ' a web dynpro application on server-1,if the application have some runtime errors. there are displayed many infomation about the runtime error,such as exception track,etc.
    But when i do the same on server-2,there just show something like:
            500   Internal Server Error
                                SAP NetWeaver Application Server 7.00/Java AS 7.00
            Failed to process request. Please contact your system administrator.
but the server-1 will stop the j2ee engine.
how can do i make server-2 show detail error message as server-1. when i debug web dynpro application need these infomation.
Appreciate your inputs...
(Note:server-1 and server-2 have same software version)
Edited by: BingLin Zhong on Feb 18, 2008 2:13 AM

The Sap-Notes 962319:
1. Check in the Visual Administrator, "Licensing Adapter" -> "General" -> "SystemType" !
If it is set to "DEVELOPMENT_MODE", verbose error messages are shown.
If it is undefined, proceed with the next step.
If it is set to something else, only exception IDs are shown. In this case the only chance is to search for this exception ID in the default traces.
2. If the system type is undefined, then in the Config Tool "Configurations" -> "webdynpro" -> "sap.com" -> "tcwddispwda" -> "Propertysheet default" -> "DevelopmentMode" is evaluated. If it is "true", verbose error messages are shown.
3. If verbose error messages are required but still the short version is shown, you probably face an error message that is not raised by Web Dynpro but by other components of the NetWeaver. In the Visual Administrator set "Properties" -> "HTTP Provider" -> "DetailedErrorResponse" to "true".
4. In addition to the error page shown in the browser or client, important messages - including error messages and stack traces - are written to the log and trace files, e.g. to the default traces usr\sap\<SID>\<instance>\j2ee\cluster\server<number>\log\defaulttrace.trc.<number>.
a) In some cases, when an exception ID is included in the error message, the detailed error message can easily be retrieved in the log file.
b) When no exception ID is given, you have to search for the detailed error message in the log specifying time stamp and/or user ID.
Always consider restarting the system after making changes on the settings.
It is not recommended to switch the "SystemType" to an inappropriate value just for viewing verbose error messages. The system type potentially affects framework, applications and licensing in an perhaps unintended way.
In the past there was no distinction between different system types regarding error messages. For security reasons this distiction has been introduced. It is not intended to show stack traces in non-development systems in the future. SAP does not provide workarounds or patches to enable such a behaviour again.

How to given the Error Message in PO

I have created the contract through t-code ME31K combination Vendor / Material / Plant. While creating PO without reference to contract for same combination Vendor / Material / Plant. But system didnu2019t give any error message u201CContract exists for Vendor /Material/Plantu2019.
I know configuration SPRO-> Materials Management-> Purchasing-> Environment Data-> Define Attributes of System Messages, but I was not able to select which Message Number.
Can you say which message number select? Or how can create the new message number?
Please guide.
Regards,
Devendra

Hello Devendra,
The error which you have mentioned will appear as message/ warning or error depending upon your setting only when you have created PO with reference to Contract and now you are trying to change the same PO.
However, to create PO manually w/o reference to contract will not populate any message/ warning or error as contract is not mandatory field.
I guess only thing you can do is make contract field mandatory for particular PO Document type and hence no PO will be created w/o reference to contract. Or if the doc type is also used for POs which do not require contract reference than drill down till possible combination where contract is must and write user exit for the same. Or creating/ using another doc type where contract is mandatory field is also one of the option.
I hope this clears your doubt. Kindly let me know if you need any further assistance on the same from my end.
@ Experts,
Please correct me if there is any better solution for the same.
Thanks And Regards,
Krupesh Kothari.

How to display the error message on screen in display mode

Hi all,
How to display error message as as status message on the screen(module pool).
The requirement is if I call the screen, it should get with the error message in the status bar. If I write with error message 'E' error mesage information displays and when I click on exit, it lives the current transaction.
Thank you!
Prasad

Hi,
Try as below.
MESSAGE IXXX DISPLAY LIKE 'E'.
LEAVE TO SCREEN XXXX.
After displaying the information message like E, leave to the screen you want to navigate or can also navigate to the transaction required.
Regards,
Nangunoori.

How to set the error message when LIV amount over PO amount ?

Similar Messages

Maybe you are looking for