How to set the value for Power Cost in SCCM reports in Euro's?

Hello,
I have found out how to change the value of the 'cost' of the KWh for these reports (reporting) . But ther original settings where displayed and set in USD($) with some other values. I have of course changed the USD to EUR (€) in my case, but my question
is: how do i know what I have to fill in in the field : costOfKwh, according my manager for my organisation it is in euro's 5,9 euroct/Kwh
Do I have to fill in 5,9 or 0,59 or 0,059 ???
Then also ther are some other values set in the original reports, like :
KwhConsumptionDesktopComputerOn value = 0,07
KwhConsumptionLaptopComputerOn value = 0,02
KwhConsumptionDesktopMonitorOn value = 0,03
Do i have to leave this settings ?

Yes, I know this is an old post, I’m just trying to clean them up.
The default of 0.09 is 9 cents/ KwH so I’m assume that 5.9 cent (euro) so that you bet 0.059
BTW if you have edit the report to change $ to € then you can also set eh default value to whatever the current power cost is too.
http://www.enhansoft.com/

Similar Messages

How to set default values for boolean columns

I'm trying to deploy some content types and columns into a site with a feature. All it's ok, except that I'm trying to set a default value for boolean columns with no success.
I've tried to set default value at column level:
<Field ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DisplayName="Se publican noticias en español"
Type="Boolean" Hidden="FALSE" Group="Columnas ShaCon" >
<Default>TRUE</Default>
</Field>
and at content type level:
<FieldRef ID="{EFE23A1D-494E-45cf-832E-45E41B17F0CF}" Name="ScopeSpanish" DefaultValue="TRUE" Required="TRUE" />
But in any case, when i create a new item with this content type, default value is applied.
Can anyone tell how to set default values for boolean columns?
Thanks in advance,
Regards,
Sergio

In the field definition you can set
<Default>1</Default>
or
<Default>0</Default>
How to set the default value Null?

A^b = n ,How to get the value for a ?

a^b = n ===> n = Math.pow(a,b)
How to get the value for a ?
dose Java have API to get the value for a ?
Thanks for help~~~

a^b = n
=>
a = n^(1/b)
So,
a = Math.pow(n,1.0/b)

How to enable root on mac on 10.9.2 and how to set the password for the same ?

how to enable root on mac on 10.9.2 and how to set the password for the same ?

http://support.apple.com/kb/ht1528
Follow the steps for Lion.
But, why are you doing this? I've never found the need to do that.

How to set the value of something in a component from the main application?

Hi,
Maybe I've been working on this too long, but I can't figure
out how to set the value of the text property of a text input field
in a component from my main application in an mx:Script block. I
have a component called Login in the components folder, and I need
to set the text value of empNum. In my mxml declaration at that the
top, I've declared these components as xmlns:c="components.*" So
logically, the property I'm trying to set is c.Login.empNum.text. I
can't figure out the correct syntax to get this to work, and I've
tried everything I can think of. Does anyone have any suggestions?
I'm thinking this should be an easy one, and I'm just missing
something.
Thanks!
Holli

Did you try giving it an id ?
<c:MyLogin id="loginScreen" /c>
So later you can do loginScreen .empNum.text = "my text"
Laurent,

How to set the value of process variables/payload using a managed bean?

Hello,
Someone can give me an example about how to set the values of a process payload in a managed bean?
thank you!

Try this:
jsf page:
<af:selectOneChoice label="Select Suburb"
requiredMessageDetail="Select a suburb"
valueChangeListener="#{selectOneChoiceBean.onValueChanged}"
validator="#{selectOneChoiceBean.validate}"
unselectedLabel="None" autoSubmit="true"
binding="#{selectOneChoiceBean.selectOneChoice}"
value="#{selectOneChoiceBean.value}">
<f:selectItems value="#{selectOneChoiceBean.selectionList}"/>
</af:selectOneChoice>
backing bean:
public class SelectChoiceBean {
private List<SelectItem> selectionList;
private String value = "B";
private RichSelectOneChoice selectOneChoice;
public SelectChoiceBean() {
initSelectionList();
public void setSelectionList(List<SelectItem> selectionList) {
this.selectionList = selectionList;
public List<SelectItem> getSelectionList() {
return selectionList;
public void onValueChanged(ValueChangeEvent valueChangeEvent) {
System.out.println(valueChangeEvent.getNewValue());
// Add event code here...
public void validate(FacesContext facesContext, UIComponent uIComponent,
Object object) {
// Add event code here...
private void initSelectionList() {
selectionList = new ArrayList<SelectItem>();
selectionList.add(new SelectItem("A", "A label"));
selectionList.add(new SelectItem("B", "B label"));
selectionList.add(new SelectItem("C", "C label"));
public void setValue(String value) {
this.value = value;
public String getValue() {
return value;
public void setSelectOneChoice(RichSelectOneChoice selectOneChoice) {
this.selectOneChoice = selectOneChoice;
public RichSelectOneChoice getSelectOneChoice() {
return selectOneChoice;
}

How to set the value in SelectOneChoice

Hi,
I need an help....
can anyone please tell me how to set the value in SelectOneChoice.
I want to set the value at index 3
i am trying selectOneChoice1.setvalue(new Integer(3)); but it is throwing an NullPointerException.
Thanks,
Neha

Hi,
is it ADF bound? If so then you set the default value to the list binding in the PageDef file. The value of the component must be bound to a method expression, which is why you see an exception. However, I think we need more information
Frank

How to set defalut values for html:radio

Hi all,
can you please tell me how to set defalut values for radio buttons (html:radio) in struts?

You may have more luck if you ask this Struts specific question in a forum devoted to Struts at their own homepage over there at apache.org. It may also help a lot to read its documentation and tutorials. I would really be surprised if they didn't even document such a trivial thing.

How to set the background for all components?

hi
Does anybody know how to set the DEFAULT background color in an application.. I need it because in jdk 1.3 the default bgcolor is grey and in 1.5 it is white.. and I wish white as well.. so to make it also white in jdk 1.3 I need to use the (a bit annoying) anyContainer.setBackground( Color.white ); and these are lots in my app.. So my question is: is there such an overall class with a function (say UIManager.setComponentsBackground( Color color ) ) for such a purpose?
any tip or link would be greatly appreciated

Does anybody know how to set the DEFAULT background color in an applicationthis might get you close
import java.awt.*;
import javax.swing.*;
import java.util.Enumeration;
class ApplicationColor extends JFrame
public ApplicationColor()
    setApplicationColor(Color.RED);
    setLocation(400,300);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JPanel jp = new JPanel(new BorderLayout());
    jp.add(new JTextField("I'm a textfield"),BorderLayout.NORTH);
    jp.add(new JComboBox(new String[]{"abc","123"}),BorderLayout.CENTER);
    jp.add(new JButton("I'm a button"),BorderLayout.SOUTH);
    getContentPane().add(jp);
    pack();
public void setApplicationColor(Color color)
    Enumeration enum = UIManager.getDefaults().keys();
    while(enum.hasMoreElements())
      Object key = enum.nextElement();
      Object value = UIManager.get(key);
      if (value instanceof Color)
        if(((String)key).indexOf("background") > -1)
          UIManager.put(key, color);
public static void main(String[] args){new ApplicationColor().setVisible(true);}
}

How to Set default value for taxonomywebtagging control with terms and nested terms

Hi,
I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
Any help would be greatly apprecited.
Control code in aspx page:
<td>
<asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
</td>
<td>
<Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
//Set the Business Unit Field
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GROUPName"];
TermSet termSet = group.TermSets["TERMSETNAME"];
Term term = termSet.Terms["TermA"];
Guid termGuid = term.Id;
term.SspId.Add(termStore.Id);
term.TermSetId.Add(termSet.Id);
term.AllowFillIn = true;
term.AnchorId = countryGuid;
term.IsMulti = true;
Thank you.
AA.

Hi,
According to your description, you want to set default value for TaxonomyWebTaggingControl.
I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
Here is the code snippet:
TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
SPSite site = SPContext.Current.Web.Site;
TermStore termStore = session.TermStores["Managed Metadata Service"];
Group group = termStore.Groups["GroupA"];
TermSet termSet = group.TermSets["A"];
Term term = termSet.Terms["A1"];
TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
TaxonomyWebTaggingControl1.AllowFillIn = true;
TaxonomyWebTaggingControl1.IsAddTerms = true;
TaxonomyWebTaggingControl1.IsMulti = false;
TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
Here is a detailed article for your reference:
http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
Feel free to Reply the test result.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

How to set default value for vc2_255_arr in plsql parameter directive?

Hi,
I would like to set a default values for a plsql parameter which is of vc2_255_arr type. How to do that?
Below is the example from PL/SQL Server Page.
+" To set a default value, so that the parameter becomes optional, include a default="expression" attribute in the directive. The values for this attribute are substituted directly into a PL/SQL statement, so any strings must be single-quoted, and you can use special values such as null, as in the following example:+
+<%@ plsql parameter="p_last_name" default="null" %> "+
My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"
*<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" %>*
Thanks in advance!
kwong

My plsql parameter is p_arr which is of "TYPE vc2_255_arr IS TABLE OF VARCHAR2(255) INDEX BY BINARY_INTEGER"You need to declare it in a package specification and initialize in the package body:
SQL> create or replace package pmp_lib
as
   type vc2_255_arr is table of varchar2 (255)
                          index by binary_integer;
   vc2_255_arr_default   vc2_255_arr;
end pmp_lib;
Package created.
SQL> create or replace package body pmp_lib
as
begin
   vc2_255_arr_default (1) := 'abc';
   vc2_255_arr_default (2) := 'def';
end pmp_lib;
Package body created.
SQL> declare
   arr   pmp_lib.vc2_255_arr := pmp_lib.vc2_255_arr_default;
begin
   for i in 1 .. arr.count
   loop
      dbms_output.put_line (arr (i));
   end loop;
end;
abc
def
PL/SQL procedure successfully completed.so in your case it would probably be sth like (assuming pmp_lib is a package):
<%@ plsql parameter="p_arr" type="PMP_LIB.VC2_255_ARR" default = "PMP_LIB.vc2_255_arr_default" %>

How to set the value of a variable in a cluster in LabVIEW from C#?

Hi guys, I'm working on a small c# program, which using the interface provided by LabVIEW. And I know that, using lv.SetControlValue(name, value) can set a variable just on the front panel. But in my case, there're several clusters on the front panel. So it confused me how to set the variables in these clusters. For example there's a cluster named clusterA, and a variable in it named valueA, I've tried something like this:
lv.SetControlValue("clusterA.valueA",1);
but it totally not work. Anyone has some experience about this stuff? Thanks a lot!!
Solved!
Go to Solution.

Hey guys, thanks a lot for all your reply. I just find a simply way to solve this porblem. For example, there a cluster named "ClusterA", and there are only two control values in it, which are: an int value named "IntA" (default value IntA = 10)and a string value named "StringA" (default value StringA = "abc"). In C# if you invoke the method:
var clusterA = (Array) vi.GetControlValue("ClusterA");
you will get an Array looks like: clusterA = {10, "abc"}; Then if you want to change IntA to 123, you just need to do:
clusterA.SetValue(123, 0); // 123 is the value, 0 is the index of IntA in the array clusterA, after this clusterA = {123, "abc"}
After this, you just need to give the array back to LabVIEW by using:
vi.SetControlValue("ClusterA", clusterA);
and now see the panel in you LabVIEW, the IntA is changed.

How to set the value of an LOV in CO prgramatically and get the Pkey value?

Hi,
I need to set a value to a LOV, say ItemLOV in a page through CO and get the Primaykey that LOV will return. How can I achieve this?
Req:
1. Set the Item_Name, say 'DELL_1618' so that the page displays this in the LOV.
2. Fetch the PK value returned by LOV in the backend into a VO attribute say Item_ID, '100009881'.
Thanks,
Santosh.

Hi Santosh,
Sorry, I replied for General LOV Scenario, but want to set it programatically right,
You need to execute your LOV query in Controller for Item 'DELL_1618' using prepared statement, get the value for both dispaly value and Id and set it to LOV and FormVlaue Item in PR of controller.
Regards,
Reetesh Sharma

CRMD_ORDER: how to set default values for Requester and Change Manager

Hello Folks,
how do I set default values in TA crmd_order?
I drew my organizational hierarchy using TAs bp and ppoma_crm.
When a new Change Request (e. g. SDHF) is created, I want the four roles (Requester, Change Manager, IT Operator and Developer) to be set automatically, not manually.
Both Requester (= Key User) and Change Manager are derivable. I did not find anything in SPRO neither in the OSS neither here.
Points will be rewarded as a matter of course!
Thanx in advance!

Hi Dirk,
look for Define Access Sequence & Define Partner Determination Procedure in SPRO and read the IMG Activity Documentation. You can find it in the Service Desk config, but it works for the other transaction types too.
Basically, you create Access Sequences where you tell the Partner Determination Procedure where to look for the values for the Partner Function fields.
The Access Sequence can use lots of sources for the information, including your org structure.
regards,
Jason

How 2 Set the logic for report 2 run 1st of everymonth......

Hi Experts,
i ve developd a HR-ABAP report in that Some part of code will Mon-Fri, Excluding Public holidays and sat & sundays...( i.e no public holidays and no sat & sundays)
and some part of should Run on 1st of everymonth.... but 2 parts of code should be in same report..
How can set the logic to run the report respective times....
Thanks in Advance....
sudeer.

you can code this but need some good expertise on fm's , date handling techniques and subroutine call coding.
1.
to make the code run only on 1st of every month
capture the rundate of ur prog .. take value of sy-datum
ex.. 01.xx.yyyy
or date std will be yyyymmdd so check for dd = 01 ..
so per logic first two chars show that its first of any month in any year ..
if yes
execute the logic for the first of every month ..
endif.
2.
where the code needs to be run on mon-fri and not on public holidays / sun / sat ..
first fetch the day based on date .. like mon or tue or wed .. except sat and sun..
second check whether if m-t-w-th-fr if any of them is a holiday or not
u need to check the date in the calender list like tholi thoc and .. to check whether that is a holiday or not ..
coming to sat and sundays .. u need to check the day for date using function modules and build the logic ...
br,
vijay..

How to set the value for Power Cost in SCCM reports in Euro's?

Similar Messages

Maybe you are looking for