How to set up remote access on wvc80n without using TZO

Just purchased the WVC80N, but how do you set it up for remote access without using TZO? I can not get TZO to work w/ my Uverse 2wire 3800-hgv-b router. Please help as the uverse customer support has not been helpful with port forwarding either.

Hi, I'm a newbie at this, so pls be patient with my terminology... I want to install 2 or 3 of these cameras in my mother's home, and I will have AT&T DSL service (one dynamic IP address) there with only a modem/wireless router. I want to access the cameras from my laptop or from my Blackberry Tour when I am traveling. Also want to allow access for my other relatives. I do not have another home computer to serve as a WHS, and my laptop is obviously not connected to the internet all of the time. Can I use the DDNS setup with DynDNS to provide access? The instructions that I read seemed to imply that I needed a WHS in order to forward ports, etc. Thanks in advance for your help.. Garry

Similar Messages

How to set up remote access to my old Powerbook?

Hello.
I would like to access some files from my old Powerbook from my new Macbook, as I always forget files I wind up needing later (I just recently bought the Macbook) , and don;t want to load everythign which was on my Powerbbok onto my new computer. Any suggestions?
Thanks

Start up the powerbook and immediately hold down the T key, until you see the Firewire logo moving on the screen. This will place your powerbook in "Target Disk Mode". Using a firewire cable plug the powerbook into the Macbook, the powerbooks disk will then mount on the Macbooks desktop and you can copy any files you want across.
Hope this helps.

How does one set up remote access via the internet to access files stored on the Time Capsule using airport utility 6.1

I was just wondering if anyone can provide me with instructions please on how to set up remote access via the internet to the time capsule when away from home?
I am running OS X Mountain Lion operating system and have Airport Utility 6.1.
Many thanks to you all for your help.

I think the instructions should be all in BTMM with iCloud.
Instructions are all there.
http://support.apple.com/kb/ht3486

How can I set up remote access on my iPad?

How can Iset up remote access on my iPad?

Thank you for responding, James. I just figured it out. I used Safari to connect to my office server system by using the http://mail server address/remote. It works just like any computer.

Set up Remote Access for Mac Mini

I recently bought a Mac Mini and set it up at home. It is running on Mac OS X 10.8.3, and runs on Server 2.2.1 and Airport Utilities 6.2. I would like to be able to access the Mac Mini server from outside my home. Does anyone know the procedure of setting up remote access (through SSH or VPN) without creating an internet domain name? Thanks!
I'm quite new to many of the Apple products, so it would be good if the answers are clearer and more detailed. Thanks!

As Barney-15E says, Back-to-My-Mac is the best option.
After that, try TeamViewer.com
ssh can be done, but there are setup details with respect to your home router to allow port 22 from the Internet side to your Mac mini <http://portforward.com>. And then you will need a dynamic DNS name from someone like No-IP.com or DynDNS.org so you can find your home router. Once you have that setup, you should make sure you use a good strong password, as you have now exposed a known port to the internet <http://xkcd.com/936/> and <https://www.grc.com/haystack.htm>. Don't forget to enable System Preferences -> Sharing -> Remote Login. So now you can ssh, but what do you want to do with that? You can create ssh tunnels for VNC screen sharing and AFP file sharing.
ssh -L 22590:localhost:5900 -L 22548:localhost:548 [email protected]
Now you have logged in and you have 2 tunnels. How to use them.
Finder -> Go -> Connect to server -> vnc://localhost:22590
Finder -> Go -> Connect to server -> afp://localhost:22548
Back-to-My-Mac and/or TeamViewer.com are easier

NEED info on How to Set Router to access just one website???

Ok here we go again, Finally found out it's my Linksys not letting me onto one website..I had a 310N and thought that was the problem so went out and bought a 610N ..same darn thing just won't let me access one website I need to sell my goods for income. I remove linksys from my modem and plug it directly into one of my computers and I got the website..Yes it's a Linksys problem !!!
I need some info on how to set up a access point in my router's setting to let me log on to this website www.denofangels or http://74.86.166.210/
Is it time for me to call the support team??????????????
I'm running XP on my computers, have 3 of the 4 computers using wirelessN adapters and on the main computer is the WRT 610
Help Please ....linksysDoll
Gone Nutz trying to figure out Linksys again!!

MY Internet provider is Time Warner / Roadrunner cable..Does this help you to solve my problem. Nothing wrong with the modem..just my wrt 610N settings, I'm guessing it carried over from my wrt 310N..this was working fine until a couple of months ago and then nothing for this one website.
I'm running XP
Thank you in advance for any help or info
Gone Nutz trying to figure out Linksys again!!

How do you disable remote access for mac routers

how do you disable remote access for mac routers

Hi, I'd never buy an Apple router again, but see if reverse thinking works here....
https://discussions.apple.com/thread/3926392?tstart=0

How do I get remote access to my time capsule

I have multiple macs that backup to my time capsule. How can I gain remote access to my timecapsule when I am not at home?

Using Google, type in the search phrase......remote access to Time Capsule.....and dozens of articles will appear.
The link below is but one example
http://www.youtube.com/watch?v=SIQ7SzA1cK4

How do I set up my new Macbook Pro without using the annoying Voiceover?

How do I set up my new MacBook Pro without using the annoying Voiceover? I cannot get it to work right; it seems to get stuck and repeats the same thing over and over. It is driving me nuts! Is there a way to begin the setup process without using the Voiceover system? I am a new convert from a PC and I thought a Mac was supposed to be "intuitive!"
Any help is appreciated.
Thanks.
Pamela

There is no good reason to register your Mac anyway.
You can opt out of the setup process and registration by pressing Command (Apple key) and the "Q" key.
The registration process requires you to divulge a lot of unnecessary information.

How to set my own gui status when i use selection-screen

how to set my own gui status when i use selection-screen command
and
how to set the names in the application tool bar when function keys are created

Make sure that you do this in event "AT SELECTION-SCREEN OUTPUT".
Run Txn ABAPDOCU and check 'DEMO_SEL_SCREEN_STATUS' for sample.
Also check out following discussion -
Selection Screen PF-STATUS
Cheers,
Sanjeev

Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

Could anyone please let me know how to set a ICC profile with Acrobat dlls using Csharp or VB

Cant we even use the dlls in an application?
In order to automate Acrobat, you need to have Acrobat installed. There is
nothing you can do with just the DLLs. As was already stated, Acrobat is
not licensed for use on a server, but regardless of that, it's also
not technically suitable for server use. You need to find a solution
outside of Acrobat to solve your problem.
It also seems that you don't have a good understanding of what is going in
inside a PDF file. PDF is a very complex file format, and based on
your questions
and followup questions, you need to spend a considerable amount of time
getting familiar with the PDF file format to understand how color works in
the PDF context. Reader the PDF spec, while paying special attention to the
section about color. You will find out that if you want to convert the
color space of a "PDF file", you actually need to convert the color space
associated with every single object in your PDF file. That is fairly simple
for vector graphic and text, but when it comes to images, you may have to
convert the image data. Once you have a good understanding of what it is
you need to do within the PDF file, then you can start looking for tools
that allow you to do that. Again, Acrobat and therefore the Acrobat SDK is
not suitable for this task. If you want to stay with Adobe products take a
serious look at the PDF Library, which his licensed through Datalogics (
http://www.datalogics.com/products/pdf/pdflibrary/). As you've mentioned,
there are other, non-Adobe PDF libraries that you can also use, but this is
the Acrobat SDK forum, so I won't discuss any of those 3rd party solutions.
You are wasting your time while looking for a simple solution that does not
exist.

How to set air port extremem 802.11n without cd?

How to set air port extremem 802.11n without cd?

What computer do you have? What operating system is it using?

How to transfer files from mac to ipad without using itunes

how to transfer files from mac to ipad without using itunes ???
as i want to use my ipad for official use as well...please suggest..

well to be 100% technical, no you didn't but that aside, it good to know there are ways for people to transfer music into the default apps without iTunes, if they have a need.
I tend to use 3rd party apps for documents, like your mentioned iExplorer etc, which are handy.
I see from a search the two "apps" you mentioned are not iOS apps, which I had assumed, SyncPod and FreeSync are apps for your computer, that would explain their access to the default Music/Video apps.
I had wondered how Apple had allowed iOS apps in the store that could get around the sandboxing in iOS of apps.
Message was edited by: CGW3

Set up a new macbook pro without using voice over

How do I set up a new MacBook Pro without using Voice Over. I can't get past the initial Welcome screen. The VO commands do not work as indicated in the forced tutorial.

Just click the Next and or Continue button. Voice over only starts shortly after you get to one of those screens and you wait to long to input something or click on an option and then Next or Continue. I think at the bottom of the screen there is an option to turn off the Voice over.

HT1689 How can I play podcasts on my iphone without using data?

How can I play podcasts on my iphone without using data?

I used to sync my podcasts to my phone individually, but found out that the Podcast app works better for me. It continously downloads the podcasts (not really sure when, that's the only thing, when its downloading it may use data depending on where you are) and also deletes the ones i have listened to. Hopefully that will help you out!

How to set up remote access on wvc80n without using TZO

Similar Messages

Maybe you are looking for