How to set User-field in Plan order

Hi
could you tell me please how to set a user-filed in plan order. when I run MRP planing, I can write some data in this filed.
thanks
henry

Hi,
Actually these user defind fields are used/assigned in the routing.
Initially u have to define your own user defind profile through OPEC transaction.
Assign this profile in the routing.
So when ur executing Mfg activities, suppose if ur using some high materials like silver...etc.
Then after executing the particular operation some amount of silver chips or silver scrap will generated .
To keep chip/scrap qty operation and date which user defind is used.
Once u have assigned this profile to routing, then it will be automatically copied in the planned order/production order.when ur confirming the order then u have to enter the all related data.
Regards
Vijay

Similar Messages

  • How to Set User Status of Sales Order at item level.

    How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
    Thanx,
    Srini
    Moderator message: please do your own research before asking.
    Edited by: Thomas Zloch on Feb 21, 2011 11:19 AM

    Mathew,
    Here is a document that should help you get started on enhancing 2LIS_11*
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
    Good luck!

  • How to activate batch field in Planned Order

    Hi all Gurus,
    My customer asked me to activate batch field in Planned Orders (MD12) so that they can enter batch number before converting planned order to production order. By entering a variant in the table I could make it display in the table but not in change mode.
    Is it something to do with screen variant or do you have any suggestions?
    Thanks in Advance
    Sree...

    Hi,
    Please maintain following config...
    1. Go to Production --> Material Requirements Planning --> Procurement Proposal --> Planned Orders --> Define Layout for components list.
    2. Then go to Field Selection Profile. Select the profile and click on profile field selection fields
    3. Click on Change Field Selection and Select Batch or any other required field. Save the changes.
    This should work, pl come back to me in case you have any further doubts.
    Regards,
    Gaurav

  • Where/ how do I set SNP to create Planned orders with multiple line items?

    Hi
    Currently our SNP is generating planned orders on a daily basis, it creates a single order with a single line item per location.
    Where/ how do set SNP to create planned orders on a daily basis to generate a single order with multiple line items per location, so therefore one planned order with multiple line items for a single location.
    Thanx
    Keegan

    Hi Keegan,
                   In SNP (APO) it is not possible to create order with multiple line items.
    But you can do some settings so that while planning system can do aggregation and disaggregation.
    But your requirment should be set on Aggregation/Dis-aggregation logic.
    Please follow the follwing links:
    http://help.sap.com/saphelp_scm2007/helpdata/en/2c/c557e9e330cc46b8e440fb3999ca51/content.htm
    Aggregation:
    http://help.sap.com/saphelp_scm2007/helpdata/en/42/f731d078e73ee4e10000000a1553f6/content.htm
    Disaggregation:
    http://help.sap.com/saphelp_scm2007/helpdata/en/a6/ebefaf32e22e468355da304cc59387/content.htm
    Please be sure that the setting of this logic will be at planning area level.
    You can't change aggregation/disaggregation logic further.
    Regards,
    Santosh

  • User exit in planned Orders

    Hello all.
    I have been search for a user exit in planned orders that allow me to define some code in it to triger some changes. this user exit should be at time of planned order is saved.
    I have already search in this forum and I found out how to find the user exits by transaction. I have tried for transaction MD12 but did not found any suitable user exit.
    Does any one know any user exit that could make my life easiser
    thanks
    Manuel Antonio

    You can try the following BAdIs:
    You can use the Business Add-In (BAdI) MD_PLDORD_CHANGE to change, before posting, data from planned orders, which have been created, changed, or deleted as a result of planning a material or manual processing.
    The Business Add-In allows you to fill and change fields from planned orders in the PLAF table. It also supports filling of customer-specific fields in the customer include CI_PLAFDB.
    You can execute the Business Add-In in the planning run in the following areas:
    Material requirements planning
    Master production planning
    Long-term planning
    You can also carry out the Business Add-In in all applications, which execute manual planned order changes. Examples of this kind of application are:
    The dialog transactions for creating and changing planned orders (MD11, MD12, MS11, MS12)
    The Business Application Programming Interfaces (BAPI) for creating and changing planned orders
    all applications that explicitly or implicitly create or change planned orders, for example the planning table of repetitive manufacturing, repetitive manufacturing confirmation, capacity planning, assembly order processing and so on.
    Requirements
    When planning a material or manually processing a planned order, you must change individual fields in the planned order or provide entries for customer-specific enhancements of the planned order structure.
    Standard settings
    The Business Add-In is not active in the standard.
    The Business Add-In cannot be used multiple times.
    The Business Add-In is not filter dependent.
    Activities
    To activate the Business Add-In, you must create an active implementation. To do this, choose the following path in the SAP Menu: Tools -> ABAP Workbench -> Utilities -> Business Add-Ins -> Implementation
    For more information about this procedure, see the SAP Library under
    Basis Components -> ABAP Workbench -> Changing the SAP Standard -> Business Add-Ins -> Implementing Business Add-Ins.
    Further notes
    Documentation on the BAdI method CHANGE_BEFORE_SAVE_MRP
    Documentation on the BAdI method CHANGE_BEFORE_SAVE_MAN
    You can also call the documentation on the BAdI method via the menu, by carrying out the following steps:
    1. Choose the tab page Interface.
    2. Double-click on the relevant method.
    3. Click on the right mouse button and choose Component documentation.
    Update Planned Orders (MD_PLDORD_POST)
    Use
    Application components:  PP-MRP, PP-MP-MPS, PP-MP-LTP, PP-REM
    Function group: M61P, M61U
    You can use the Business Add-In (BAdI) MD_PLDORD_POST to further process data from planned orders, which have been created, changed or deleted through the planning of a material or as a result of manual processing.
    The Business Add-In allows you to publish the created and changed data from planned orders and can be used to update customer-specific tables or to connect to information systems and workflows.
    You cannot use the methods of the Business Add-In to change the planned orders themselves. The planned orders are always posted in the communicated form.
    You can execute the Business Add-In in the planning run of the following areas:
    Material requirements planning (PP-MRP)
    Master production planning (PP-MP-MPS)
    Long-term planning (PP-MP-LTP)
    You can also execute the Business Add-In in all applications, which carry out manual planned order changes, for example:
    The dialog transactions for creating and changing planned orders (MD11, MD12, MS11, MS12)
    The Business Application Programming Interfaces (BAPI) for creating and changing planned orders ( PlannedOrder Create, PlannedOrder Change)
    All applications that explicitly or implicitly create and change planned orders, for example the planning table of repetitive manufacturing, repetitive manufacturing confirmation, capacity planning, assembly order processing, and so on.
    Standard settings
    The Business Add-In is not active in the standard.
    The Business Add-In can be used multiple times.
    The Business Add-In is not filter dependent.
    Activities
    To activate the Business Add-In, you must create an active implementation. To do this, choose the following path in the SAP Menu: Tools -> ABAP Workbench -> Utilities -> Business Add-Ins -> Implementation
    For more information about this procedure, see the SAP Library under
    Basis Components -> ABAP Workbench -> Changing the SAP Standard -> Business Add-Ins -> Implementing Business Add-Ins.
    Note that the Business Add-In can be used multiple times and therefore all active implementations are called and run through.
    Example
    The following is a possible use for the methods of this Business Add-In:
    When planning a material or manually processing planned orders, you want to log the changes made to the planned orders or the triggered subsequent functions.
    The subsequent processing of certain planned orders or individual data from the planned orders occurs in an external planning system. In this case, you can log the corresponding changes to these planned orders in a user-defined table during planning. Using a separate report, you can select the data from the log table and process it further.
    Further notes
    Methods
    Update Planned Orders: Requirements Planning - POST_AFTER_SAVE_MRP
    Update Planned Orders: Manual Processing  - POST_AFTER_SAVE_MAN
    You can also call the documentation on the BAdI method via the menu, by carrying out the following steps:
    1. Choose the tab page Interface.
    2. Double-click on the relevant method.
    3. Click on the right mouse button and choose Component documentation.
    Regards
    Ram

  • Two extra field in Planned Orders

    Dear Gurus,
    The client for which I am working on discrete and now some of their products want to go for REM.
    In discrete manufacturing, there is Production Order for the finished and assemblies made. Two extra fields were provided and recorded when Production order is made for eg entering a software version no, PO no in the order which is a reference.
    Now having going for REM, how to capture these two fields in REM backflush scenario?
    Can we have the two open fields in Planned Orders?
    or while backflushing, finally we have to give this two extra fields? Is there any provision? But at end of every backflushing booking, it is difficult for the user to give the two extra values.
    How to handle this scenario?
    Please guide me.
    Srini

    In REM there is one user exit - XMRM0001, by which you can make the system to popup a screen during backflush and enter the required data in this screen and make the system to uodate required field in std table where the rem data is stored. We used it for entering the SILO number. May be it will be helpful to you.

  • How to set key fields in a Database view

    Hi guru's
    iam balaji,plz guide me with how to set key fields in a view.......that field is a non key field in the base table....
    thanks in advance,
    Balaji.S

    take a look at this:
    Diagnosis
        In the view, not all of the mandatory fields were included as key
        fields. The key of the view therefore is not unique.
    System Response
        All the fields are regarded as key fields in order to guarantee that th
        key lengths are unique.
    Procedure
        For views with a large number of fields, this could have a negative
        effect on the performance for the language construction described below
        In this case, all the mandatory key fields should be included in the
        view.
    regards

  • [ISA 4.0 SP5] How to set the language of an order

    Hi,
    how to set the language of an order?
    I use address.setCountry( myCountry ) and works fine, but:
    an Order in R3 has also a field "Language" under the tab "Communication", but it's not set automatically, corresponding to the country.
    How do i set this field on the Java-side in InternetSales 4.0 Sp5?

    Hi vikram!
    Sorry for the still inconvenience, but I'm getting this error:
    Error in method invocation: Static method sendNotification( com.sap.odp.usermgmt.masterdata.UserAccountBo, com.sap.odp.usermgmt.masterdata.UserAccountBo, com.sap.odp.api.comp.messaging.MailTypeEnumType, java.util.Properties, null, null ) not found in class'com.sap.odp.api.util.NotificationUtil'
    Im making the code the following way:
    Properties params = new Properties();
    params.put(new String("PHASE_NAME"), faseName);
    params.put(new String("DOCUMENT_TYPE"), docType);
    params.put(new String("DOCUMENT_NAME"), contractName);
    params.put(new String("RECIPIENT_FIRST_NAME"), nombre);
    params.put(new String("OWNER_FIRST_LAST_NAME"), owner.toString());
    params.put(new String("START_DATE"), fecha);
    params.put(new String("ORG_UNIT"), orgUnit);
    params.put(new String("INSTRUCTION"), "");
    params.put(new String("DOCUMENT_HEADER_URL"), vinculo);
    recipients = IapiAccountLocator.lookup(session, collaborator.getPrincipal()); // This Changed.
    ( I also tried like this:
    IapiAccountIfc recipients = IapiAccountLocator.lookup(session, collaborator.getPrincipal());)
    sender = session.getAccount();
    mailTypeEnum = new MailTypeEnumType(MailTypeEnumType.ODP_WORKFLOW_APPROVAL_REQUEST_MSG);
    NotificationUtil.sendNotification(recipients,sender, mailTypeEnum,params,null,null);
    Thanks again!

  • How to set the field SKB1-FDLEV as requestred-entry in G/L Master data?

    Hi All,
    Could anyone tell me how to set the field SKB1-FDLEV as requestred-entry in G/L Master data?
    Thanks
    Gandalf

    hi
    Go to OB26
    select Your criteria ( create, change or display)
    double click on it
    again double click on Bank/financial details
    there you will find the Planning level make it require entry
    save
    with regards
    ramanuja chary

  • How to set user quotas on a certain filesystem

    Hi
    It may be simple and easy question but I'm really new to this
    I need to know how to set user quotas on a certain file system in details
    I know it can be done easily in one step in Solaris ZFS
    but how is it done in Linux ?
    Thanks in Advance :)

    See also:
    How to set user quotas on a certain filesystem

  • How to set user friendly URL in ApEx with OHS 11g ?

    Hi,
    How to set user friendly URL in ApEx with OHS 11g ?
    I want change the link http://190.148.xxx.xxx:8080/pls/apex to something like http://xxx.com.
    I dont want to use iFrame solution. Please suggest any other method to acheive the same.
    Thanks & Regards,
    Ranu

    Hi all
    Iam using apex 4.0 -oracle 11g with OHS on linux os
    I need to change my apex url http://x.x.x.x:xxxx/apex to http://x.com
    What are the settings i need to do.
    If any one knows please share the solution with me
    Thanks & In advance

  • How to set user preferred timezone in OBIEE for all objects.

    How to set user preferred timezone in OBIEE for all objects based on users TZ(may be from @{session.timeZone}). without changing My Account -> Preferences

    Check
    Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
    just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

  • How to set Character field's Format Mask?

    dear all,
    how to set Character field's Format Mask?
    i searched the forum and found the following, where can i use this code and how to change and set its format mask.
    SRW.SET_FORMAT_MASK('mask');
    Thanks
    Muhammad Nadeem

    Nadeem,
    If you have database 10g, look into function REGEXP_REPLACE. Otherwise you can also try this (you might already know).
    SELECT SUBSTR('CHHOCMIPO07020001', 1,2)||'-'||SUBSTR('CHHOCMIPO07020001' ,3,2)||'-'||
    SUBSTR('CHHOCMIPO07020001' , 5,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 7,3)||'-'||
    SUBSTR('CHHOCMIPO07020001' , 10,2)||'-'||SUBSTR('CHHOCMIPO07020001' , 12,2)||'-'||
    SUBSTR('CHHOCMIPO07020001' , 14,4)
    FROM dual
    CH-HO-CM-IPO-07-02-0001
    If you have to use this at many places, create a function, pass the raw value, manipulate the string and return.
    FS

  • How to set user specific Layout for executing IW38/IW39  report.

    Dear Experts,
    We have 10 users seperatly, For executing IW38/39 transaction they have maintained seperate layouts for executing the reports. While saving layout they have saved the layout as 'user specific' Now some body has chage the settings.
    After changing the setting all are getting same layout.
    Please suggest how to set user specific layout. When user enter the IW38/39 report by default he should get his layout.
    Thanks in advance.

    Create Variant using SHD0 and with Group and assign to particular user's
    Here is the steps
    Creating a Variant Group
    1. Open transaction SHD0, enter the transaction code, and press enter.
    2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
    3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
    Assigning Users
    Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
    1. Return to the Standard Variants tab page, Variant Groups sub tab page.
    2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
    3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
    You can use this procedure of user assignment for all other users that you want to add to the variant group
    Hope this helps.
    Thanks
    S.N

  • Lock/ disable field in planned order MD12

    Dear expert,
    Can we lock the field in planned order? In my case, I want the purchasing staff to be able to change only the production version, for others field i want them to be locked. Therefore the purchasing cannot change any fields in there except the production version.
    this is due to the need for material subcon.
    Maybe u can give any advice. what should i do?? do i need to make new customizing t-code for ex: ZMD12 or just make new customizing from authorization t-code su3?
    Thanks
    Pauline

    Dear Pauline,
    Check in SE93,by creating a new T Code ,with the start object as Transaction with variant.
    Transaction type: Variant transaction
    In the SAP Reference IMG, under "Basis Components" -> "Application Personalizaion" -> "Tailoring of Application Transactions",  you can define transaction variants. These allow you to preassign values to fields within a transaction, define field attributes, or hide entire screens.
    To run a transaction variant, you define a variant transaction. On the next screen, enter the name of the transaction and the name of the variant.
    Note
    Variant transactions are client-specific.
    If you try to start a variant transaction and the corresponding variant does not exist, the transaction runs without a variant.
    If the above does not helps you means,check this link to explore more,
    Transaction variant
    Regards
    Mangalraj.S

Maybe you are looking for

  • Cant transfer music drms

    Hey guys just bought a new 5800 and having problems on the nokia music site. It wont let me transfer the music I download to my computer or phone. It come up saying      the filke or device is protected by windows media drm and requires downloading a

  • Call Forwarding Number on 3G Not Retained as it was on Original iPhone

    On the original iPhone I could turn call forwarding on and off and the number I had set to have calls forwarded to was retained when I turned forwarding back on. With the 3G the number to be forwarded to needs to re-entered each time I turn call forw

  • IDOC ( WS-- XI -- R/3) Receiver Port

    Hello i am having issues with IDOC post on R/3 via XI. The issue is with receiver port. I am populating values of Message variant and message function in Mapping and nothing else were populated. As per SAP documentation RCVPOR variable will be popula

  • When I connect my iPhone 4, iPhoto opens, but no device or import window option opens?

    When I connect my iPhone 4 running ios 5, iPhoto '11 (9.2.1) opens, but the phone does not show up in the sidebar as a device and no option to import the photos pops up. How do I get iPhoto to show my iPhone as a device so that I can import pictures

  • Adding buttons to Canvas

    Hi i have a class that extends Canvas. can i add buttons to the canvas? i mean, i want to make the images in the canvas clickable. is this possible in Java? Thank for help.