How to set user friendly URL in ApEx with OHS 11g ?

Hi,
How to set user friendly URL in ApEx with OHS 11g ?
I want change the link http://190.148.xxx.xxx:8080/pls/apex to something like http://xxx.com.
I dont want to use iFrame solution. Please suggest any other method to acheive the same.
Thanks & Regards,
Ranu

Hi all
Iam using apex 4.0 -oracle 11g with OHS on linux os
I need to change my apex url http://x.x.x.x:xxxx/apex to http://x.com
What are the settings i need to do.
If any one knows please share the solution with me
Thanks & In advance

Similar Messages

Configuring Oracle Application Server to use a user friendly url

Hi All,
I am having trouble configuring the apache httpd.conf file within an applicaton server to be able to use user-friendly urls for the infrastructure identity management tools server. I also need this for security reasons as well as hardware reasons - loadbalancing.
At the moment I have a standard setup, whereby the sso application server is using port 7777. I would like the user not to enter the port, but to enter just a standard url, like http://login.<company>.com.au, so that if the user needs to modify oid using the oiddas web application, they can enter something like http://login.<company>.com.au/oiddas/ rather than http://<machine host name>:7777/oiddas/. This would also be used by portal for sso logins.
From the standard installation, Apache was configured as follows:
Port 7777
Listen 7777
ServerName <machine host name>
DocumentRoot <root document folder>
Now reading the documentation from the Oracle Application Server Installation notes for the Http Server, they document how to do this (in the loadbalancer section - this will eventually be used in the hardware setup):
Port 80
Listen 7777
Listen 80
# Virtual Hosts
# This section is mandatory for URLs that are generated by
# the PL/SQL packages of the Oracle Portal and various other components
# These entries dictate that the server should listen on port
# 7777, but will assert that it is using port 80, so that
# self-referential URLs generated specify www.oracle.com:80
# This will create URLs that are valid for the browser since
# the browser does not directly see the host server.oracle.com.
NameVirtualHost <machine ip>:7777
<VirtualHost <nameofmachine>:7777>
ServerName login.<company>.com.au
Port 80
</VirtualHost>
# Since the previous virtual host entry will cause all links
# generated by the Oracle Portal to use port 80, the server.company.com
# server needs to listen on 80 as well since the Parallel Page
# Engine will make connection requests to Port 80 to request the
# portlets.
NameVirtualHost <machine ip>:80
<VirtualHost <nameofmachine>:80>
ServerName login.<company>.com.au
Port 80
<VirtualHost>
Note that I used slightly different names for the url's rather than the oracle names www.oracle.com and server.oracle.com
Now after applying this, I noticed not only could I not go to the oiddas from the original machine name, but also couldnt go there from the new machine name.
Also I was not even able to go to the standard index page whereby you can go to the enterprise manager for the application server, from either names.
The following urls provide me with "The Page Cannot Be Displayed" error message:
http://login.<company>.com.au:7777/
http://<nameofmachine>:7777/
The following urls provide me with "Page Under Construction" error message:
http://login.<company>.com.au/
http://<nameofmachine>/
Could someone please tell me why this is the case, considering I am using the installation procedures Oracle has published within the Oracle Http Server Admistrators Guide (http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14007/netconf.htm#sthref379).
Cheers
Rodney

Hi Rondey,
Ik think that I can see your probleem.
Just change the following line at your httpd.conf, then restart the component.
First of all if the port is installed with nr. 7777. then the listen process will be on port 7778
the second thing is just try to do the following steps
((Port 80 to Port 7777)))
Listen 7778
%%%% In loadbalancer section %%%%%%
just add the following lines
Listen 80
Listen 8103
Listen 8102
NameVirtualHost *
NameVirtualHost *:8103 or 80
If you want to use this ports (8103 or 8102) for other site (url), then
<VirtualHost *:80>
ServerName <machine ip> or (host name)
Hear from U,
Regards,
Hamdy

How to set user quotas on a certain filesystem

Hi
It may be simple and easy question but I'm really new to this
I need to know how to set user quotas on a certain file system in details
I know it can be done easily in one step in Solaris ZFS
but how is it done in Linux ?
Thanks in Advance :)

See also:
How to set user quotas on a certain filesystem

How to set user preferred timezone in OBIEE for all objects.

How to set user preferred timezone in OBIEE for all objects based on users TZ(may be from @{session.timeZone}). without changing My Account -> Preferences

Check
Time Zone Specification from http://docs.oracle.com/cd/E12844_01/doc/bip.1013/e12187/T421739T481157.htm#4535403
just in case https://blogs.oracle.com/xmlpublisher/entry/how_to_keep_your_dates_from_go

How to set user specific Layout for executing IW38/IW39 report.

Dear Experts,
We have 10 users seperatly, For executing IW38/39 transaction they have maintained seperate layouts for executing the reports. While saving layout they have saved the layout as 'user specific' Now some body has chage the settings.
After changing the setting all are getting same layout.
Please suggest how to set user specific layout. When user enter the IW38/39 report by default he should get his layout.
Thanks in advance.

Create Variant using SHD0 and with Group and assign to particular user's
Here is the steps
Creating a Variant Group
1. Open transaction SHD0, enter the transaction code, and press enter.
2. Choose the Standard Variants tab page, and then the sub tab page Variant Groups, and enter a group name, such as GROUP_GEN
3. Choose Create. Enter a short text on the Maintain Variant Group window that appears and save the variant group.
Assigning Users
Once you have created the variant group and the relevant transaction variants with screen variants, you now need to assign users to the variant group as follows
1. Return to the Standard Variants tab page, Variant Groups sub tab page.
2. Enter the name of a user that you want to assign to this variant group, and choose Assign. A message that this user was successfully assigned to the variant group appears in the status bar. If you choose a where-used list for users, this user is displayed in the user list.
3. However, for the screen variants of the variant group that you created above to be displayed for the user, you first need to select Set Proposal. The user is assigned to the group and the associated transactions are started with the corresponding variants only once you choose the Set Proposal function.
You can use this procedure of user assignment for all other users that you want to add to the variant group
Hope this helps.
Thanks
S.N

How to Set User Status of Sales Order at item level.

How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
Thanx,
Srini
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Feb 21, 2011 11:19 AM

Mathew,
Here is a document that should help you get started on enhancing 2LIS_11*
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
Good luck!

How to set up an clasic TS-desktop with Windows 2012 (R2)?

Hi,
How to set up an clasic TS-desktop with Windows 2012 (R2)?
Witch Roles and Features do I need, RD Session Host, RD Connection Broker, RD Licensing?
/SaiTech

Hi,
Thank you for posting in Windows Server Forum.
Based on your description provided, I can understand that you want to setup RDS server 2012 R2 and want information how to achieve that. If misunderstood then please correct.
If yes, then there is different option related to setup. There are 2 option for configuring.
1. Role based or Feature based installation
2. Remote Desktop services installation
For normal RDS environment, you can use 2nd option and then perform Quick start Deployment where 3 roles can be installed RD Connection Broker, RD Session Host and RD Web access. After this you can also publish RemoteApp and can use.
You can refer following article for more information.
a) Remote Desktop Services (RDS) Quick Start Deployment for RemoteApp, Windows
Server 2012 Style
b) Step by Step Windows 2012 R2 Remote Desktop Services – Part 1
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

How to set color space to JPEG image with Java advance Imaging

How to set color space to JPEG image with Java advance Imaging.
is there any API in JAI which support to set color space.

I'm definately no guru, but this is how you can change it.
CTRL + ALT + Click on the part of the component that you want to change. This brings up the Hidden Dom Inspector, background of component will be surrounded with a red outline (Make sure the red outline is surrounding the part of the tabset you want to change), Now you go to properties sheet and click the ellipses next to rules property this will pop up a dialog you look in this list (At the top) to see the default style classes that are affecting the rendering of the component outlined in red. (You will be able to select different sections of a single component) then you just rewrite the style class that you want to change in your Stylesheet (You will not find the styleclass that you want to change because it is a part of your theme .jar but as long as you name it exactly the same and place in your stylesheet it will override the theme .jar style classes) it's actually very easy -- you were right should be a piece of cake for a guru. Don't have the link handy but you can check out Winston's Blog on changing Table Formatting to get this information...It is EXTREMELY useful if you want your apps to have a custom look and not default that comes with Creator Themes.
Hope this helps you out God knows others have helped me alot!
Jason

How to find users who are running IE with different credentials ?

How to find users who are running IE with different credentials ?
Is there any tool or a solution in the market will help or a i can use GPO or even Power Shell ?
thnx & Regards ,,

Hi Salman,
Based on your description, we can use Windows Credential Manager to check this. Windows Credential Manager stores credentials, such as user names and passwords that we use to log on to websites or other computers on a network.
Regarding Credential Manager, the following article can be referred to for more information.
Credential Manager
http://windows.microsoft.com/en-in/windows7/what-is-credential-manager
Manage passwords in Internet Explorer using Credential Manager
http://www.thewindowsclub.com/manage-passwords-internet-explorer-10
Please Note: Since the above website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Frank Shen

How to create user-friendly MDX parameters for MS Reporting Services?

In SQL Server Reporting Service, when I connect to my cube to create a dataset, in Query Designer I create my query with a filter. It creates the following MDX for me:
SELECT NON EMPTY
KPIValue("KPI1"), KPIGoal("KPI1"), KPIStatus("KPI1")
ON COLUMNS, NON EMPTY
[Create Date].[Month Num].[Month Num].ALLMEMBERS * [Create Date].[Hierarchy].[Month].ALLMEMBERS
DIMENSION PROPERTIES MEMBER_CAPTION,
MEMBER_UNIQUE_NAME ON ROWS FROM
( SELECT
( STRTOSET(@CreateDateYear, CONSTRAINED) )
ON COLUMNS FROM [ERP])
WHERE
( IIF( STRTOSET(@CreateDateYear, CONSTRAINED).Count = 1,
STRTOSET(@CreateDateYear, CONSTRAINED),
[Create Date].[Year].currentmember ) )
CELL PROPERTIES VALUE, BACK_COLOR,
FORE_COLOR, FORMATTED_VALUE,
FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
When I add this dataset, Reporting Services creates a parameter named CreateDateYear. When I pass a value like "2014" to this parameter I get nothing and I have to pass a value like
[Create Date].[Year].&[2014].
How can I change my report to change this parameter for passing the value like "2014" instead of ugly and not user-friendly string
[Create Date].[Year].&[2014]?

Hi ,
Follow the below steps
1. Create a dataset with MDX as below which would return the member caption (2005,2006 etc) and member uniquename ([Date].[Calendar Year].&[2005],[Date].[Calendar
Year].&[2006] etc)
WITH MEMBER [Measures].[ParameterCaption] AS [Date].[Calendar Year].CURRENTMEMBER.MEMBER_CAPTION
MEMBER [Measures].[ParameterValue] AS [Date].[Calendar Year].CURRENTMEMBER.UNIQUENAME
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue]} ON COLUMNS
, [Date].[Calendar Year].ALLMEMBERS ON ROWS
FROM [Adventure Works]
2. In the parameter's available values choose the above data set and set the options as
Value Field = ParameterValue
ValueCaption = ParameterCaption
In this way use will see only the years and based on the selection the respective values will be passed to the dataset as parameter.
Best Regards Sorna

How to manage a "nice" url if APEX uses web pl/sql and not Apache?

Hi all,
How can I create a pretty url without using redirects or frames since APEX is using web pl/sql and not Apache? This is on version 4.0.1. We want the users to access the Apex App from a nice url without the traditional long url.
Thanks,
Veena.

How can I create a pretty url without using redirects or frames since APEX is using web pl/sql and not Apache? This is on version 4.0.1. We want the users to access the Apex App from a nice url without the traditional long url.Hi,
check out the last part of this blog post:
http://ora-00001.blogspot.com/2009/07/creating-rest-web-service-with-plsql.html
- Morten
http://ora-00001.blogspot.com

How to set User-field in Plan order

Hi
could you tell me please how to set a user-filed in plan order. when I run MRP planing, I can write some data in this filed.
thanks
henry

Hi,
Actually these user defind fields are used/assigned in the routing.
Initially u have to define your own user defind profile through OPEC transaction.
Assign this profile in the routing.
So when ur executing Mfg activities, suppose if ur using some high materials like silver...etc.
Then after executing the particular operation some amount of silver chips or silver scrap will generated .
To keep chip/scrap qty operation and date which user defind is used.
Once u have assigned this profile to routing, then it will be automatically copied in the planned order/production order.when ur confirming the order then u have to enter the all related data.
Regards
Vijay

How to set user privilege

i want to NEW USER excute procedure which
is other schema!
i want not to use prefix for execute procedure!
how to set NEW user privilege?
null

Hi
I create a user in a Database using SQL developer,
so it is a Database User.
Now I want to give this user access to some table in
read , write mode and just let it to read some other
tables.
how i can do this ? SQL*Developer currently doesn't support security admininstration through the GUI, but you can use sqlworksheet to issue grant statements.
grant select on mytable to otheruser1;
grant select,insert,update,delete on mytable to otheruser2;
It looks like that when we create a use SQL developer
create a schema for that user , how i can make more
users without creating Schema for each of them ?
A schema is the collection of objects owned by a user. A user can exist without owning any objects.
If you are using XE, you might be better off using the XE GUI to manage this.

How to set user settings insap

how to set default settings

n SAP Easy Access screen System -->User Profile -->Own Data. In which, in the defaults tab you can change the change the formats for the user and save the settings
actually all time's we dont have authorizations to change those..
and SU3 tcode is alos correct
Regard points if useful
Regards
sas

How to set user friendly URL in ApEx with OHS 11g ?

Similar Messages

Maybe you are looking for